Help- TP-Link wireless card TL-WN851N doesn't work with ath9k driver

05-03-2009	#1 (permalink)
tomreagan84 Just Joined! Join Date: May 2009 Posts: 11	Help- TP-Link wireless card TL-WN851N doesn't work with ath9k driver Hi, I am using ubuntu 9.04, but cannot establish a wireless connection. I am using an atheros based wireless card, but the ath9k driver does not seem to work. I downloaded and installed compat wireless and managed to uninstall the ath9k drivers. But am unable to install the ath5k drivers. If I reboot the system ath9k automatically reinstalls. I don't know what to try next, do I need an NDIS wrapper? I am new to Linux, so any help would be much appreciated.

05-03-2009	#2 (permalink)
tomreagan84 Just Joined! Join Date: May 2009 Posts: 11	It's an internal card, here's the relevant info, hope this means something to someone: steve@steve:~$ lspci -nn 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2) 00:01.0 ISA bridge [0601]: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2) 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1) 00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1) 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2) 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1) 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) 00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) 00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) 00:07.0 Audio device [0403]: nVidia Corporation MCP78S [GeForce 8200] High Definition Audio [10de:0774] (rev a1) 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) 00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2) 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP78S [GeForce 8200] Ethernet [10de:0760] (rev a2) 00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) 00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1) 00:13.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200] 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map [1022:1201] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control [1022:1204] 01:06.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0023] (rev 01) 01:07.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 01:07.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 01:07.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) 02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400 GS [10de:06e4] (rev a1) steve@steve:~$

05-03-2009	#3 (permalink)
tomreagan84 Just Joined! Join Date: May 2009 Posts: 11	This is more relevant info, with ath9k uninstalled: [ 0.597341] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) 0, disabled. [ 0.597609] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) 0, disabled. [ 0.597880] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) 15 [ 0.598148] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) 0, disabled. [ 0.598415] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) 0, disabled. [ 0.598683] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) 0, disabled. [ 0.598951] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) 0, disabled. [ 0.599221] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) 0, disabled. [ 0.599491] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) 0, disabled. [ 0.599759] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) 0, disabled. [ 0.600047] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) 0, disabled. [ 0.600315] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) 0, disabled. [ 0.600585] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) 0, disabled. [ 0.600852] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) 0, disabled. [ 0.601120] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) 0, disabled. [ 0.601389] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) 0, disabled. [ 0.601656] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) 0, disabled. [ 0.601924] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) 0, disabled. [ 0.602192] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) 0, disabled. [ 0.602460] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) 0, disabled. [ 0.602728] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) 0, disabled. [ 0.602995] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) 0, disabled. [ 0.603267] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) 10 [ 0.603538] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) 15 [ 0.603810] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) 10 [ 0.604107] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) 15 [ 0.604374] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) 0, disabled. [ 0.604645] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) 11 [ 0.604916] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) 10 [ 0.605188] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) 5 [ 0.605505] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) 0, disabled. [ 0.605778] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) 11 [ 0.606050] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 [ 0.606158] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 22, should be 15 [20080926] [ 0.606276] ACPI: WMI: Mapper loaded [ 0.606306] SCSI subsystem initialized [ 0.606306] libata version 3.00 loaded. [ 0.606306] usbcore: registered new interface driver usbfs [ 0.606306] usbcore: registered new interface driver hub [ 0.606306] usbcore: registered new device driver usb [ 0.606306] PCI: Using ACPI for IRQ routing [ 0.620008] Bluetooth: Core ver 2.13 [ 0.620019] NET: Registered protocol family 31 [ 0.620019] Bluetooth: HCI device and connection manager initialized [ 0.620019] Bluetooth: HCI socket layer initialized [ 0.620019] NET: Registered protocol family 8 [ 0.620019] NET: Registered protocol family 20 [ 0.620022] NetLabel: Initializing [ 0.620023] NetLabel: domain hash size = 128 [ 0.620024] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.620034] NetLabel: unlabeled traffic allowed by default [ 0.620257] PCI-DMA: Disabling AGP. [ 0.620306] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.620308] PCI-DMA: using GART IOMMU. [ 0.620310] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.621936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.621940] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.636057] AppArmor: AppArmor Filesystem Enabled [ 0.640015] Switched to high resolution mode on CPU 0 [ 0.640018] Switched to high resolution mode on CPU 1 [ 0.640022] Switched to high resolution mode on CPU 2 [ 0.640031] Switched to high resolution mode on CPU 3 [ 0.648213] pnp: PnP ACPI init [ 0.648227] ACPI: bus type pnp registered [ 0.651589] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.651591] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.657760] pnp: PnP ACPI: found 15 devices [ 0.657762] ACPI: ACPI bus type pnp unregistered [ 0.657770] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.657772] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.657774] system 00:06: ioport range 0x500-0x57f has been reserved [ 0.657775] system 00:06: ioport range 0x580-0x5ff has been reserved [ 0.657777] system 00:06: ioport range 0x800-0x87f could not be reserved [ 0.657779] system 00:06: ioport range 0x880-0x8ff has been reserved [ 0.657781] system 00:06: ioport range 0xd00-0xd7f has been reserved [ 0.657784] system 00:06: ioport range 0xd80-0xdff has been reserved [ 0.657787] system 00:06: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.657789] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.657793] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.657794] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.657798] system 00:0b: ioport range 0x230-0x23f has been reserved [ 0.657799] system 00:0b: ioport range 0x290-0x29f has been reserved [ 0.657801] system 00:0b: ioport range 0xa00-0xa0f has been reserved [ 0.657803] system 00:0b: ioport range 0xa10-0xa1f has been reserved [ 0.657806] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.657809] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.657811] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.657813] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.657815] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved [ 0.657817] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.662450] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.662451] pci 0000:00:08.0: IO window: disabled [ 0.662455] pci 0000:00:08.0: MEM window: 0xf9f00000-0xf9ffffff [ 0.662457] pci 0000:00:08.0: PREFETCH window: disabled [ 0.662460] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02 [ 0.662464] pci 0000:00:10.0: IO window: 0xe000-0xefff [ 0.662473] pci 0000:00:10.0: MEM window: 0xfa000000-0xfebfffff [ 0.662480] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.662492] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03 [ 0.662493] pci 0000:00:12.0: IO window: disabled [ 0.662502] pci 0000:00:12.0: MEM window: disabled [ 0.662508] pci 0000:00:12.0: PREFETCH window: disabled [ 0.662520] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04 [ 0.662521] pci 0000:00:13.0: IO window: disabled [ 0.662529] pci 0000:00:13.0: MEM window: disabled [ 0.662536] pci 0000:00:13.0: PREFETCH window: disabled [ 0.662551] pci 0000:00:08.0: setting latency timer to 64 [ 0.662935] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.662942] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.662950] pci 0000:00:10.0: setting latency timer to 64 [ 0.663327] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.663333] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 0.663340] pci 0000:00:12.0: setting latency timer to 64 [ 0.663706] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17 [ 0.663712] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 0.663719] pci 0000:00:13.0: setting latency timer to 64 [ 0.663724] bus: 00 index 0 io port: [0x00-0xffff] [ 0.663726] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.663727] bus: 01 index 0 mmio: [0x0-0x0] [ 0.663728] bus: 01 index 1 mmio: [0xf9f00000-0xf9ffffff] [ 0.663730] bus: 01 index 2 mmio: [0x0-0x0] [ 0.663731] bus: 01 index 3 io port: [0x00-0xffff] [ 0.663732] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.663734] bus: 02 index 0 io port: [0xe000-0xefff] [ 0.663735] bus: 02 index 1 mmio: [0xfa000000-0xfebfffff] [ 0.663736] bus: 02 index 2 mmio: [0xd0000000-0xdfffffff] [ 0.663738] bus: 02 index 3 mmio: [0x0-0x0] [ 0.663739] bus: 03 index 0 mmio: [0x0-0x0] [ 0.663740] bus: 03 index 1 mmio: [0x0-0x0] [ 0.663741] bus: 03 index 2 mmio: [0x0-0x0] [ 0.663742] bus: 03 index 3 mmio: [0x0-0x0] [ 0.663743] bus: 04 index 0 mmio: [0x0-0x0] [ 0.663744] bus: 04 index 1 mmio: [0x0-0x0] [ 0.663745] bus: 04 index 2 mmio: [0x0-0x0] [ 0.663746] bus: 04 index 3 mmio: [0x0-0x0] [ 0.663754] NET: Registered protocol family 2 [ 0.704057] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.704529] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.705325] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.705632] TCP: Hash tables configured (established 262144 bind 65536) [ 0.705634] TCP reno registered [ 0.716337] NET: Registered protocol family 1 [ 0.716424] checking if image is initramfs... it is [ 1.107108] Freeing initrd memory: 7741k freed [ 1.109391] audit: initializing netlink socket (disabled) [ 1.109405] type=2000 audit(1241385632.108:1): initialized [ 1.114965] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.115799] VFS: Disk quotas dquot_6.5.1 [ 1.115833] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.116189] fuse init (API version 7.10) [ 1.116234] msgmni has been set to 15787 [ 1.116373] alg: No test for stdrng (krng) [ 1.116384] io scheduler noop registered [ 1.116385] io scheduler anticipatory registered [ 1.116386] io scheduler deadline registered [ 1.116409] io scheduler cfq registered (default) [ 1.165768] pci 0000:00:07.0: Enabling HT MSI Mapping [ 1.165795] pci 0000:00:08.0: Enabling HT MSI Mapping [ 1.165824] pci 0000:00:09.0: Enabling HT MSI Mapping [ 1.165853] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 1.165907] pci 0000:00:10.0: Enabling HT MSI Mapping [ 1.165972] pci 0000:00:12.0: Enabling HT MSI Mapping [ 1.166037] pci 0000:00:13.0: Enabling HT MSI Mapping [ 1.166110] pci 0000:02:00.0: Boot video device [ 1.178036] pcieport-driver 0000:00:10.0: setting latency timer to 64 [ 1.178204] pcieport-driver 0000:00:10.0: found MSI capability [ 1.178285] pcieport-driver 0000:00:10.0: irq 2303 for MSI/MSI-X [ 1.178317] pci_express 0000:00:10.0cie00: allocate port service [ 1.178488] pcieport-driver 0000:00:12.0: setting latency timer to 64 [ 1.178654] pcieport-driver 0000:00:12.0: found MSI capability [ 1.178732] pcieport-driver 0000:00:12.0: irq 2302 for MSI/MSI-X [ 1.178764] pci_express 0000:00:12.0cie00: allocate port service [ 1.178933] pcieport-driver 0000:00:13.0: setting latency timer to 64 [ 1.179099] pcieport-driver 0000:00:13.0: found MSI capability [ 1.179176] pcieport-driver 0000:00:13.0: irq 2301 for MSI/MSI-X [ 1.179208] pci_express 0000:00:13.0cie00: allocate port service [ 1.179347] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.179352] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.179454] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.179457] ACPI: Power Button (FF) [PWRF] [ 1.179486] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.179488] ACPI: Power Button (CM) [PWRB] [ 1.179723] processor ACPI_CPU:00: registered as cooling_device0 [ 1.179743] processor ACPI_CPU:01: registered as cooling_device1 [ 1.179762] processor ACPI_CPU:02: registered as cooling_device2 [ 1.179783] processor ACPI_CPU:03: registered as cooling_device3 [ 1.214012] Linux agpgart interface v0.103 [ 1.214019] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.214103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.214315] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.214722] brd: module loaded [ 1.214884] loop: module loaded [ 1.214925] Fixed MDIO Bus: probed [ 1.214929] PPP generic driver version 2.4.2 [ 1.214963] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.214981] Driver 'sd' needs updating - please use bus_type methods [ 1.214986] Driver 'sr' needs updating - please use bus_type methods [ 1.215010] ahci 0000:00:09.0: version 3.0 [ 1.215399] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 1.215407] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.215452] ahci 0000:00:09.0: irq 2300 for MSI/MSI-X [ 1.215506] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 1.215508] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 1.215510] ahci 0000:00:09.0: setting latency timer to 64 [ 1.215845] scsi0 : ahci [ 1.215909] scsi1 : ahci [ 1.215949] scsi2 : ahci [ 1.215987] scsi3 : ahci [ 1.216030] scsi4 : ahci [ 1.216073] scsi5 : ahci [ 1.216133] ata1: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76100 irq 2300 [ 1.216135] ata2: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76180 irq 2300 [ 1.216137] ata3: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76200 irq 2300 [ 1.216139] ata4: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76280 irq 2300 [ 1.216141] ata5: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76300 irq 2300 [ 1.216143] ata6: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76380 irq 2300 [ 1.696299] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.697395] ata1.00: ATA-8: Hitachi HDT721032SLA360, ST2OA31B, max UDMA/133 [ 1.697397] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.699152] ata1.00: configured for UDMA/133 [ 2.584285] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.586075] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22LS30, 1.01, max UDMA/100 [ 2.587884] ata2.00: configured for UDMA/100 [ 2.908278] ata3: SATA link down (SStatus 0 SControl 300) [ 3.228093] ata4: SATA link down (SStatus 0 SControl 300) [ 3.548305] ata5: SATA link down (SStatus 0 SControl 300) [ 3.868074] ata6: SATA link down (SStatus 0 SControl 300) [ 3.868142] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72103 ST2O PQ: 0 ANSI: 5 [ 3.868194] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 3.868204] sd 0:0:0:0: [sda] Write Protect is off [ 3.868205] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.868218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.868257] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 3.868264] sd 0:0:0:0: [sda] Write Protect is off [ 3.868265] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.868278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.868280] sda: sda1 sda2 < sda5 > [ 3.917580] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.917608] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.919054] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22LS30 1.01 PQ: 0 ANSI: 5 [ 3.923102] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.923105] Uniform CD-ROM driver Revision: 3.20 [ 3.923152] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.923175] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.923305] pata_amd 0000:00:06.0: version 0.3.10 [ 3.923331] pata_amd 0000:00:06.0: setting latency timer to 64 [ 3.923403] scsi6 : pata_amd [ 3.923441] scsi7 : pata_amd [ 3.924259] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 3.924261] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 4.087095] ata8: port disabled. ignoring. [ 4.087359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.087746] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 4.087753] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 4.087762] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 4.087764] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 4.087795] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 4.087816] ehci_hcd 0000:00:02.1: debug port 1 [ 4.087819] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 4.087833] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9e7fc00 [ 4.096025] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 4.096069] usb usb1: configuration #1 chosen from 1 choice [ 4.096086] hub 1-0:1.0: USB hub found [ 4.096091] hub 1-0:1.0: 6 ports detected [ 4.096519] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 4.096526] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 4.096532] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 4.096533] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 4.096557] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 4.096575] ehci_hcd 0000:00:04.1: debug port 1 [ 4.096578] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 4.096591] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf9e7f800 [ 4.108294] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 4.108327] usb usb2: configuration #1 chosen from 1 choice [ 4.108341] hub 2-0:1.0: USB hub found [ 4.108345] hub 2-0:1.0: 6 ports detected [ 4.108763] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16 [ 4.108769] ehci_hcd 0000:01:07.2: PCI INT C -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16 [ 4.108775] ehci_hcd 0000:01:07.2: EHCI Host Controller [ 4.108799] ehci_hcd 0000:01:07.2: new USB bus registered, assigned bus number 3 [ 4.132213] ehci_hcd 0000:01:07.2: irq 16, io mem 0xf9fefc00 [ 4.144282] ehci_hcd 0000:01:07.2: USB 2.0 started, EHCI 1.00 [ 4.144310] usb usb3: configuration #1 chosen from 1 choice [ 4.144323] hub 3-0:1.0: USB hub found [ 4.144327] hub 3-0:1.0: 5 ports detected [ 4.144377] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.144743] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 4.144749] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 4.144755] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 4.144757] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 4.144783] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 4 [ 4.144800] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9e7e000 [ 4.203832] usb usb4: configuration #1 chosen from 1 choice [ 4.203847] hub 4-0:1.0: USB hub found [ 4.203852] hub 4-0:1.0: 6 ports detected [ 4.204258] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 [ 4.204260] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23 [ 4.204267] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 4.204269] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 4.204292] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 5 [ 4.204311] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf9e7d000 [ 4.258053] usb usb5: configuration #1 chosen from 1 choice [ 4.258066] hub 5-0:1.0: USB hub found [ 4.258072] hub 5-0:1.0: 6 ports detected [ 4.258489] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 [ 4.258491] ohci_hcd 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19 [ 4.258498] ohci_hcd 0000:01:07.0: OHCI Host Controller [ 4.258521] ohci_hcd 0000:01:07.0: new USB bus registered, assigned bus number 6 [ 4.258539] ohci_hcd 0000:01:07.0: irq 19, io mem 0xf9fed000 [ 4.343403] usb usb6: configuration #1 chosen from 1 choice [ 4.343417] hub 6-0:1.0: USB hub found [ 4.343422] hub 6-0:1.0: 3 ports detected [ 4.343836] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 [ 4.343838] ohci_hcd 0000:01:07.1: PCI INT B -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 [ 4.343845] ohci_hcd 0000:01:07.1: OHCI Host Controller [ 4.343868] ohci_hcd 0000:01:07.1: new USB bus registered, assigned bus number 7 [ 4.343887] ohci_hcd 0000:01:07.1: irq 18, io mem 0xf9fee000 [ 4.408034] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 4.425996] usb usb7: configuration #1 chosen from 1 choice [ 4.426009] hub 7-0:1.0: USB hub found [ 4.426014] hub 7-0:1.0: 2 ports detected [ 4.426060] uhci_hcd: USB Universal Host Controller Interface driver [ 4.426102] usbcore: registered new interface driver libusual [ 4.426120] usbcore: registered new interface driver usbserial [ 4.426126] USB Serial support registered for generic [ 4.543696] usb 1-5: configuration #1 chosen from 1 choice [ 4.904210] usb 5-3: new low speed USB device using ohci_hcd and address 2 [ 5.118386] usb 5-3: configuration #1 chosen from 1 choice [ 5.121304] usbcore: registered new interface driver usbserial_generic [ 5.121306] usbserial: USB Serial Driver core [ 5.121328] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.121329] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.121395] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.129600] mice: PS/2 mouse device common for all mice [ 5.165869] rtc_cmos 00:08: RTC can wake from S4 [ 5.165888] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 5.165938] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 5.165974] device-mapper: uevent: version 1.0.3 [ 5.166037] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.166142] device-mapper: multipath: version 1.0.5 loaded [ 5.166144] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.166259] cpuidle: using governor ladder [ 5.166260] cpuidle: using governor menu [ 5.166510] TCP cubic registered [ 5.166551] NET: Registered protocol family 10 [ 5.166795] lo: Disabled Privacy Extensions [ 5.166966] NET: Registered protocol family 17 [ 5.166976] Bluetooth: L2CAP ver 2.11 [ 5.166977] Bluetooth: L2CAP socket layer initialized [ 5.166979] Bluetooth: SCO (Voice Link) ver 0.6 [ 5.166980] Bluetooth: SCO socket layer initialized [ 5.167030] Bluetooth: RFCOMM socket layer initialized [ 5.167033] Bluetooth: RFCOMM TTY layer initialized [ 5.167034] Bluetooth: RFCOMM ver 1.10 [ 5.167090] powernow-k8: Found 1 AMD Phenom(tm) II X4 920 Processor processors (4 cpu cores) (version 2.20.00) [ 5.167123] powernow-k8: 0 : pstate 0 (2800 MHz) [ 5.167124] powernow-k8: 1 : pstate 1 (2100 MHz) [ 5.167126] powernow-k8: 2 : pstate 2 (1600 MHz) [ 5.167127] powernow-k8: 3 : pstate 3 (800 MHz) [ 5.167343] registered taskstats version 1 [ 5.167429] Magic number: 9:716:347 [ 5.167449] pci0000:00: hash matches [ 5.167523] rtc_cmos 00:08: setting system clock to 2009-05-03 21:20:37 UTC (1241385637) [ 5.167525] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.167526] EDD information not available. [ 5.167557] Freeing unused kernel memory: 536k freed [ 5.167704] Write protecting the kernel read-only data: 6708k [ 5.184170] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 5.282583] Floppy drive(s): fd0 is 1.44M [ 5.300360] FDC 0 is a post-1991 82077 [ 5.303004] usbcore: registered new interface driver hiddev [ 5.310421] input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:04.0/usb5/5-3/5-3:1.0/input/input4 [ 5.322362] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 5.322787] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 5.322791] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 5.322794] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 5.337634] generic-usb 0003:045E:00D1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:04.0-3/input0 [ 5.337649] usbcore: registered new interface driver usbhid [ 5.337652] usbhid: v2.6:USB HID core driver [ 5.385647] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:23:54:d6:f1:ef [ 5.385650] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 5.488278] PM: Starting manual resume from disk [ 5.488280] PM: Resume from partition 8:5 [ 5.488281] PM: Checking hibernation image. [ 5.488373] PM: Resume from disk failed. [ 5.491100] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.491103] EXT3-fs: write access will be enabled during recovery. [ 5.578104] kjournald starting. Commit interval 5 seconds [ 5.578111] EXT3-fs: recovery complete. [ 5.578589] EXT3-fs: mounted filesystem with ordered data mode. [ 10.324743] udev: starting version 141 [ 10.897611] cfg80211: Calling CRDA to update world regulatory domain [ 11.025100] parport_pc 00:05: reported by Plug and Play ACPI [ 11.025146] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 11.055929] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 11.139581] ppdev: user-space parallel port driver [ 11.186833] cfg80211: World regulatory domain updated: [ 11.186835] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.186837] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.186839] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.186840] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.186842] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.186843] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.308402] ath9k: 0.1 [ 11.308844] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 11.308847] ath9k 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 [ 11.460762] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 11.461165] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 11.461168] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 11.461207] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 11.733368] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 11.769394] Registered led device: ath9k-phy0:radio [ 11.769416] Registered led device: ath9k-phy0:assoc [ 11.769436] Registered led device: ath9k-phy0:tx [ 11.769455] Registered led device: ath9k-phy0:rx [ 11.770018] phy0: Atheros 5416: mem=0xffffc200101e0000, irq=17 [ 12.342150] lp0: using parport0 (interrupt-driven). [ 12.399309] Adding 12699340k swap on /dev/sda5. Priority:-1 extents:1 across:12699340k [ 12.924037] EXT3 FS on sda1, internal journal [ 13.681604] type=1505 audit(1241385646.012:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2228 [ 13.707933] type=1505 audit(1241385646.037:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2232 [ 13.707991] type=1505 audit(1241385646.037:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2232 [ 13.708015] type=1505 audit(1241385646.037:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2232 [ 13.708037] type=1505 audit(1241385646.037:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2232 [ 13.780159] type=1505 audit(1241385646.109:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2237 [ 13.780259] type=1505 audit(1241385646.109:: operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2237 [ 13.796633] type=1505 audit(1241385646.125:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2241 [ 15.980547] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.980549] Bluetooth: BNEP filters: protocol multicast [ 16.000256] Bridge firewalling registered [ 21.668141] forcedeth 0000:00:0a.0: irq 2299 for MSI/MSI-X [ 21.689938] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.948015] eth0: no IPv6 routers present [ 36.835216] wlan0: authenticate with AP 00:1d:68:7a:12:89 [ 36.836654] wlan0: authenticated [ 36.836656] wlan0: associate with AP 00:1d:68:7a:12:89 [ 36.839463] wlan0: RX AssocResp from 00:1d:68:7a:12:89 (capab=0x411 status=0 aid=3) [ 36.839466] wlan0: associated [ 36.847790] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 40.624836] wlan0: authenticate with AP 00:1d:68:7a:12:89 [ 40.685858] wlan0: disassociating by local choice (reason=3) [ 97.219136] ath9k 0000:01:06.0: PCI INT A disabled [ 97.219180] ath9k: driver unloaded

05-03-2009	#4 (permalink)
waterhead Trusted Penguin Join Date: Jul 2004 Location: Franklin, Wisconsin Posts: 3,957	This is your wireless card: Code: 01:06.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0023] (rev 01) There seems to be confusion on exactly which driver this uses. Either the ath5k or the ath9k. I could use more info, so read this How-To, and post all of the info that it tells how to find. Wireless Setup - Start Here I wish you would have posted this info before you made so many changes to your system. It will be hard to tell what it is suppose to do. One of the major differences between the ath5k and ath9k drivers is that the ath9k supports 802.11n wireless chips. If this is an n wireless card, maybe that is the driver you need. Since it is very difficult to determine the exact chipset that this card has, if it is possible to look at the card and identify the chips on it, that could help. Here is a list of Atheros chips: Compatibility/Atheros - madwifi-project.org - Trac If you are unable to make it work with the ath5k or ath9k drivers, then I suggest trying the Madwifi driver. It used to be the default Atheros driver in Ubuntu, until 9.04. It may still be installable from the repositories. If not, get the source from the Madwifi web site. madwifi-project.org - Trac __________________ Paul Please do not PM me with requests for help. I will not reply. Last edited by waterhead; 05-03-2009 at 11:34 PM..

05-03-2009	#5 (permalink)
tomreagan84 Just Joined! Join Date: May 2009 Posts: 11	Hi, I'm currently carrying out a clean reboot of ubuntu, to make things simpler. Ath9k seems to be installed by default with ubuntu 9.04, it picks up the network and tries to connect to it, but then the whole system freezes, and i have to restart it with the power button. The only way to stop the system crashing is to disable wireless. This is presumably going to affect the information, you need me to get. I managed to install ath5k, but this doesn't seem to pick up the wireless connection, and upon reboot, ubuntu automatically reverts to ath9k. Thanks for your help.

05-03-2009	#6 (permalink)
waterhead Trusted Penguin Join Date: Jul 2004 Location: Franklin, Wisconsin Posts: 3,957	Try installing this package, it should have updated drivers: linux-backports-modules-jaunty Open the Hardware Drivers program (or whatever jaunty calls it) and check for wireless drivers. There may be more than one. __________________ Paul Please do not PM me with requests for help. I will not reply.

05-04-2009	#7 (permalink)
tomreagan84 Just Joined! Join Date: May 2009 Posts: 11	Probably a stupid question, but where do I get the modules package from. I can't find it on the backports website.

05-04-2009

#8 (permalink)

tomreagan84

Just Joined!

Join Date: May 2009

Posts: 11

Jaunty is freshly installed, so I'll give you that info step by step.

Card info:

Code:

01:06.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0023] (rev 01)

Driver modules:

Code:

:~$ lsmod
Module                  Size  Used by
binfmt_misc            18572  1 
bridge                 63904  0 
stp                    11140  1 bridge
bnep                   22912  2 
input_polldev          12688  0 
video                  29204  0 
output                 11648  1 video
lp                     19588  0 
arc4                   10240  2 
ecb                    11392  2 
snd_hda_intel         557364  3 
snd_pcm_oss            52352  0 
snd_mixer_oss          24960  1 snd_pcm_oss
snd_pcm                99336  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy          11524  0 
snd_seq_oss            41984  0 
snd_seq_midi           15744  0 
snd_rawmidi            33920  1 snd_seq_midi
snd_seq_midi_event     16512  2 snd_seq_oss,snd_seq_midi
ath9k                 288568  0 
snd_seq                66272  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
mac80211              251144  1 ath9k
snd_timer              34064  2 snd_pcm,snd_seq
snd_seq_device         16276  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
cfg80211               43168  1 mac80211
snd                    78792  15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              16800  1 snd
ppdev                  16904  0 
led_class              13064  1 ath9k
snd_page_alloc         18704  2 snd_hda_intel,snd_pcm
pcspkr                 11136  0 
parport_pc             45096  1 
parport                49584  3 lp,ppdev,parport_pc
forcedeth              68368  0 
usbhid                 47040  0 
floppy                 75816  0 
fbcon                  49792  0 
tileblit               11264  1 fbcon
font                   17024  1 fbcon
bitblit                14464  1 fbcon
softcursor             10368  1 bitblit

Potential Error codes:

Code:

0.595024] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.595291] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.595558] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.595825] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.596118] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.596385] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.596657] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[    0.596924] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.597192] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.597460] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.597731] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
[    0.597998] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.598265] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.598532] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.598799] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[    0.599069] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.599339] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.599607] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.599874] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.600159] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.600427] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.600694] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.600962] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.601229] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.601496] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.601763] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.602031] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[    0.602298] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[    0.602565] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[    0.602832] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[    0.603103] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.603374] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[    0.603645] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.603916] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
[    0.604208] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[    0.604479] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.604750] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
[    0.605021] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.605337] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.605609] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
[    0.605881] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[    0.605990] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 22, should be 15 [20080926]
[    0.606107] ACPI: WMI: Mapper loaded
[    0.606138] SCSI subsystem initialized
[    0.606138] libata version 3.00 loaded.
[    0.606138] usbcore: registered new interface driver usbfs
[    0.606138] usbcore: registered new interface driver hub
[    0.606138] usbcore: registered new device driver usb
[    0.606138] PCI: Using ACPI for IRQ routing
[    0.620009] Bluetooth: Core ver 2.13
[    0.620020] NET: Registered protocol family 31
[    0.620020] Bluetooth: HCI device and connection manager initialized
[    0.620020] Bluetooth: HCI socket layer initialized
[    0.620020] NET: Registered protocol family 8
[    0.620020] NET: Registered protocol family 20
[    0.620022] NetLabel: Initializing
[    0.620024] NetLabel:  domain hash size = 128
[    0.620025] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.620034] NetLabel:  unlabeled traffic allowed by default
[    0.620257] PCI-DMA: Disabling AGP.
[    0.620307] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    0.620308] PCI-DMA: using GART IOMMU.
[    0.620310] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.621938] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.621942] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.636056] AppArmor: AppArmor Filesystem Enabled
[    0.640014] Switched to high resolution mode on CPU 0
[    0.640017] Switched to high resolution mode on CPU 2
[    0.640021] Switched to high resolution mode on CPU 1
[    0.640027] Switched to high resolution mode on CPU 3
[    0.648214] pnp: PnP ACPI init
[    0.648228] ACPI: bus type pnp registered
[    0.651594] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[    0.651596] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[    0.657767] pnp: PnP ACPI: found 15 devices
[    0.657768] ACPI: ACPI bus type pnp unregistered
[    0.657777] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    0.657778] system 00:06: ioport range 0x800-0x80f has been reserved
[    0.657780] system 00:06: ioport range 0x500-0x57f has been reserved
[    0.657782] system 00:06: ioport range 0x580-0x5ff has been reserved
[    0.657784] system 00:06: ioport range 0x800-0x87f could not be reserved
[    0.657786] system 00:06: ioport range 0x880-0x8ff has been reserved
[    0.657788] system 00:06: ioport range 0xd00-0xd7f has been reserved
[    0.657791] system 00:06: ioport range 0xd80-0xdff has been reserved
[    0.657793] system 00:06: iomem range 0xfed04000-0xfed04fff has been reserved
[    0.657795] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.657799] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.657801] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.657804] system 00:0b: ioport range 0x230-0x23f has been reserved
[    0.657806] system 00:0b: ioport range 0x290-0x29f has been reserved
[    0.657808] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[    0.657809] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[    0.657813] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.657816] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.657818] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[    0.657820] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    0.657821] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[    0.657823] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.662455] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[    0.662457] pci 0000:00:08.0:   IO window: disabled
[    0.662460] pci 0000:00:08.0:   MEM window: 0xf9f00000-0xf9ffffff
[    0.662462] pci 0000:00:08.0:   PREFETCH window: disabled
[    0.662466] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[    0.662470] pci 0000:00:10.0:   IO window: 0xe000-0xefff
[    0.662479] pci 0000:00:10.0:   MEM window: 0xfa000000-0xfebfffff
[    0.662485] pci 0000:00:10.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.662497] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03
[    0.662498] pci 0000:00:12.0:   IO window: disabled
[    0.662507] pci 0000:00:12.0:   MEM window: disabled
[    0.662513] pci 0000:00:12.0:   PREFETCH window: disabled
[    0.662525] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04
[    0.662526] pci 0000:00:13.0:   IO window: disabled
[    0.662535] pci 0000:00:13.0:   MEM window: disabled
[    0.662541] pci 0000:00:13.0:   PREFETCH window: disabled
[    0.662556] pci 0000:00:08.0: setting latency timer to 64
[    0.662940] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[    0.662947] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[    0.662955] pci 0000:00:10.0: setting latency timer to 64
[    0.663332] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[    0.663339] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
[    0.663346] pci 0000:00:12.0: setting latency timer to 64
[    0.663720] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
[    0.663726] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
[    0.663733] pci 0000:00:13.0: setting latency timer to 64
[    0.663738] bus: 00 index 0 io port: [0x00-0xffff]
[    0.663739] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.663741] bus: 01 index 0 mmio: [0x0-0x0]
[    0.663742] bus: 01 index 1 mmio: [0xf9f00000-0xf9ffffff]
[    0.663744] bus: 01 index 2 mmio: [0x0-0x0]
[    0.663745] bus: 01 index 3 io port: [0x00-0xffff]
[    0.663746] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
[    0.663748] bus: 02 index 0 io port: [0xe000-0xefff]
[    0.663749] bus: 02 index 1 mmio: [0xfa000000-0xfebfffff]
[    0.663750] bus: 02 index 2 mmio: [0xd0000000-0xdfffffff]
[    0.663751] bus: 02 index 3 mmio: [0x0-0x0]
[    0.663753] bus: 03 index 0 mmio: [0x0-0x0]
[    0.663754] bus: 03 index 1 mmio: [0x0-0x0]
[    0.663755] bus: 03 index 2 mmio: [0x0-0x0]
[    0.663756] bus: 03 index 3 mmio: [0x0-0x0]
[    0.663757] bus: 04 index 0 mmio: [0x0-0x0]
[    0.663758] bus: 04 index 1 mmio: [0x0-0x0]
[    0.663759] bus: 04 index 2 mmio: [0x0-0x0]
[    0.663760] bus: 04 index 3 mmio: [0x0-0x0]
[    0.663768] NET: Registered protocol family 2
[    0.696103] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.696565] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.697358] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.697662] TCP: Hash tables configured (established 262144 bind 65536)
[    0.697664] TCP reno registered
[    0.708086] NET: Registered protocol family 1
[    0.708172] checking if image is initramfs... it is
[    1.098392] Freeing initrd memory: 7762k freed
[    1.100687] audit: initializing netlink socket (disabled)
[    1.100701] type=2000 audit(1241395606.100:1): initialized
[    1.106258] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.107107] VFS: Disk quotas dquot_6.5.1
[    1.107141] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.107490] fuse init (API version 7.10)
[    1.107536] msgmni has been set to 15787
[    1.107676] alg: No test for stdrng (krng)
[    1.107687] io scheduler noop registered
[    1.107689] io scheduler anticipatory registered
[    1.107690] io scheduler deadline registered
[    1.107713] io scheduler cfq registered (default)
[    1.157809] pci 0000:00:07.0: Enabling HT MSI Mapping
[    1.157837] pci 0000:00:08.0: Enabling HT MSI Mapping
[    1.157865] pci 0000:00:09.0: Enabling HT MSI Mapping
[    1.157894] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    1.157948] pci 0000:00:10.0: Enabling HT MSI Mapping
[    1.158013] pci 0000:00:12.0: Enabling HT MSI Mapping
[    1.158078] pci 0000:00:13.0: Enabling HT MSI Mapping
[    1.158150] pci 0000:02:00.0: Boot video device
[    1.170074] pcieport-driver 0000:00:10.0: setting latency timer to 64
[    1.170242] pcieport-driver 0000:00:10.0: found MSI capability
[    1.170323] pcieport-driver 0000:00:10.0: irq 2303 for MSI/MSI-X
[    1.170355] pci_express 0000:00:10.0:pcie00: allocate port service
[    1.170527] pcieport-driver 0000:00:12.0: setting latency timer to 64
[    1.170693] pcieport-driver 0000:00:12.0: found MSI capability
[    1.170770] pcieport-driver 0000:00:12.0: irq 2302 for MSI/MSI-X
[    1.170802] pci_express 0000:00:12.0:pcie00: allocate port service
[    1.170972] pcieport-driver 0000:00:13.0: setting latency timer to 64
[    1.171138] pcieport-driver 0000:00:13.0: found MSI capability
[    1.171215] pcieport-driver 0000:00:13.0: irq 2301 for MSI/MSI-X
[    1.171247] pci_express 0000:00:13.0:pcie00: allocate port service
[    1.171386] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.171391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.171492] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.171494] ACPI: Power Button (FF) [PWRF]
[    1.171523] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.171525] ACPI: Power Button (CM) [PWRB]
[    1.171761] processor ACPI_CPU:00: registered as cooling_device0
[    1.171782] processor ACPI_CPU:01: registered as cooling_device1
[    1.171800] processor ACPI_CPU:02: registered as cooling_device2
[    1.171822] processor ACPI_CPU:03: registered as cooling_device3
[    1.205995] Linux agpgart interface v0.103
[    1.206003] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.206086] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.206297] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.206702] brd: module loaded
[    1.206865] loop: module loaded
[    1.206905] Fixed MDIO Bus: probed
[    1.206909] PPP generic driver version 2.4.2
[    1.206943] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.206961] Driver 'sd' needs updating - please use bus_type methods
[    1.206967] Driver 'sr' needs updating - please use bus_type methods
[    1.206991] ahci 0000:00:09.0: version 3.0
[    1.207377] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    1.207385] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[    1.207429] ahci 0000:00:09.0: irq 2300 for MSI/MSI-X
[    1.207483] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[    1.207486] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio 
[    1.207488] ahci 0000:00:09.0: setting latency timer to 64
[    1.207821] scsi0 : ahci
[    1.207885] scsi1 : ahci
[    1.207924] scsi2 : ahci
[    1.207963] scsi3 : ahci
[    1.208000] scsi4 : ahci
[    1.208045] scsi5 : ahci
[    1.208106] ata1: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76100 irq 2300
[    1.208108] ata2: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76180 irq 2300
[    1.208110] ata3: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76200 irq 2300
[    1.208112] ata4: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76280 irq 2300
[    1.208114] ata5: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76300 irq 2300
[    1.208116] ata6: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76380 irq 2300
[    1.688113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.689508] ata1.00: ATA-8: Hitachi HDT721032SLA360, ST2OA31B, max UDMA/133
[    1.689510] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.691314] ata1.00: configured for UDMA/133
[    2.576312] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.578103] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22LS30, 1.01, max UDMA/100
[    2.579909] ata2.00: configured for UDMA/100
[    2.900117] ata3: SATA link down (SStatus 0 SControl 300)
[    3.220241] ata4: SATA link down (SStatus 0 SControl 300)
[    3.540304] ata5: SATA link down (SStatus 0 SControl 300)
[    3.860057] ata6: SATA link down (SStatus 0 SControl 300)
[    3.860132] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72103 ST2O PQ: 0 ANSI: 5
[    3.860184] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[    3.860194] sd 0:0:0:0: [sda] Write Protect is off
[    3.860195] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.860208] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.860247] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[    3.860254] sd 0:0:0:0: [sda] Write Protect is off
[    3.860256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.860268] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.860270]  sda: sda1 sda2 < sda5 >
[    3.901196] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.901224] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.902690] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22LS30 1.01 PQ: 0 ANSI: 5
[    3.906721] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.906723] Uniform CD-ROM driver Revision: 3.20
[    3.906769] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.906792] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.906922] pata_amd 0000:00:06.0: version 0.3.10
[    3.906947] pata_amd 0000:00:06.0: setting latency timer to 64
[    3.907020] scsi6 : pata_amd
[    3.907058] scsi7 : pata_amd
[    3.907871] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    3.907873] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    4.071203] ata8: port disabled. ignoring.
[    4.071467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.071853] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    4.071861] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    4.071869] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    4.071871] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    4.071903] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    4.071924] ehci_hcd 0000:00:02.1: debug port 1
[    4.071927] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    4.071941] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9e7fc00
[    4.080127] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    4.080172] usb usb1: configuration #1 chosen from 1 choice
[    4.080189] hub 1-0:1.0: USB hub found
[    4.080194] hub 1-0:1.0: 6 ports detected
[    4.080621] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[    4.080628] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[    4.080633] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    4.080635] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    4.080659] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[    4.080678] ehci_hcd 0000:00:04.1: debug port 1
[    4.080680] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    4.080694] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf9e7f800
[    4.092054] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    4.092088] usb usb2: configuration #1 chosen from 1 choice
[    4.092101] hub 2-0:1.0: USB hub found
[    4.092105] hub 2-0:1.0: 6 ports detected
[    4.092513] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16
[    4.092519] ehci_hcd 0000:01:07.2: PCI INT C -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16
[    4.092525] ehci_hcd 0000:01:07.2: EHCI Host Controller
[    4.092549] ehci_hcd 0000:01:07.2: new USB bus registered, assigned bus number 3
[    4.116309] ehci_hcd 0000:01:07.2: irq 16, io mem 0xf9fefc00
[    4.128313] ehci_hcd 0000:01:07.2: USB 2.0 started, EHCI 1.00
[    4.128341] usb usb3: configuration #1 chosen from 1 choice
[    4.128354] hub 3-0:1.0: USB hub found
[    4.128358] hub 3-0:1.0: 5 ports detected
[    4.128408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.128781] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[    4.128787] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[    4.128793] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    4.128795] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    4.128819] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 4
[    4.128836] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9e7e000
[    4.187538] usb usb4: configuration #1 chosen from 1 choice
[    4.187555] hub 4-0:1.0: USB hub found
[    4.187560] hub 4-0:1.0: 6 ports detected
[    4.187968] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[    4.187970] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
[    4.187976] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    4.187978] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    4.188001] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 5
[    4.188020] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf9e7d000
[    4.242123] usb usb5: configuration #1 chosen from 1 choice
[    4.242137] hub 5-0:1.0: USB hub found
[    4.242143] hub 5-0:1.0: 6 ports detected
[    4.242566] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[    4.242568] ohci_hcd 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
[    4.242575] ohci_hcd 0000:01:07.0: OHCI Host Controller
[    4.242598] ohci_hcd 0000:01:07.0: new USB bus registered, assigned bus number 6
[    4.242616] ohci_hcd 0000:01:07.0: irq 19, io mem 0xf9fed000
[    4.327407] usb usb6: configuration #1 chosen from 1 choice
[    4.327421] hub 6-0:1.0: USB hub found
[    4.327426] hub 6-0:1.0: 3 ports detected
[    4.327831] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
[    4.327833] ohci_hcd 0000:01:07.1: PCI INT B -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
[    4.327840] ohci_hcd 0000:01:07.1: OHCI Host Controller
[    4.327862] ohci_hcd 0000:01:07.1: new USB bus registered, assigned bus number 7
[    4.327882] ohci_hcd 0000:01:07.1: irq 18, io mem 0xf9fee000
[    4.392034] usb 1-5: new high speed USB device using ehci_hcd and address 2
[    4.410006] usb usb7: configuration #1 chosen from 1 choice
[    4.410019] hub 7-0:1.0: USB hub found
[    4.410024] hub 7-0:1.0: 2 ports detected
[    4.410069] uhci_hcd: USB Universal Host Controller Interface driver
[    4.410112] usbcore: registered new interface driver libusual
[    4.410129] usbcore: registered new interface driver usbserial
[    4.410135] USB Serial support registered for generic
[    4.527772] usb 1-5: configuration #1 chosen from 1 choice
[    4.888014] usb 5-3: new low speed USB device using ohci_hcd and address 2
[    5.102246] usb 5-3: configuration #1 chosen from 1 choice
[    5.105480] usbcore: registered new interface driver usbserial_generic
[    5.105482] usbserial: USB Serial Driver core
[    5.105507] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    5.105509] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    5.105575] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.117731] mice: PS/2 mouse device common for all mice
[    5.153713] rtc_cmos 00:08: RTC can wake from S4
[    5.153732] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    5.153783] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    5.153818] device-mapper: uevent: version 1.0.3
[    5.153879] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    5.153988] device-mapper: multipath: version 1.0.5 loaded
[    5.153990] device-mapper: multipath round-robin: version 1.0.0 loaded
[    5.154108] cpuidle: using governor ladder
[    5.154109] cpuidle: using governor menu
[    5.154359] TCP cubic registered
[    5.154401] NET: Registered protocol family 10
[    5.154642] lo: Disabled Privacy Extensions
[    5.154814] NET: Registered protocol family 17
[    5.154824] Bluetooth: L2CAP ver 2.11
[    5.154825] Bluetooth: L2CAP socket layer initialized
[    5.154827] Bluetooth: SCO (Voice Link) ver 0.6
[    5.154828] Bluetooth: SCO socket layer initialized
[    5.154878] Bluetooth: RFCOMM socket layer initialized
[    5.154882] Bluetooth: RFCOMM TTY layer initialized
[    5.154883] Bluetooth: RFCOMM ver 1.10
[    5.154939] powernow-k8: Found 1 AMD Phenom(tm) II X4 920 Processor processors (4 cpu cores) (version 2.20.00)
[    5.154971] powernow-k8:    0 : pstate 0 (2800 MHz)
[    5.154973] powernow-k8:    1 : pstate 1 (2100 MHz)
[    5.154975] powernow-k8:    2 : pstate 2 (1600 MHz)
[    5.154976] powernow-k8:    3 : pstate 3 (800 MHz)
[    5.155192] registered taskstats version 1
[    5.155277]   Magic number: 9:353:101
[    5.155369] rtc_cmos 00:08: setting system clock to 2009-05-04 00:06:51 UTC (1241395611)
[    5.155371] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.155373] EDD information not available.
[    5.155404] Freeing unused kernel memory: 536k freed
[    5.155551] Write protecting the kernel read-only data: 6708k
[    5.171936] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    5.270894] Floppy drive(s): fd0 is 1.44M
[    5.287914] FDC 0 is a post-1991 82077
[    5.291644] usbcore: registered new interface driver hiddev
[    5.299408] input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:04.0/usb5/5-3/5-3:1.0/input/input4
[    5.305739] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    5.306160] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[    5.306164] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[    5.306167] forcedeth 0000:00:0a.0: setting latency timer to 64
[    5.328310] generic-usb 0003:045E:00D1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:04.0-3/input0
[    5.328326] usbcore: registered new interface driver usbhid
[    5.328328] usbhid: v2.6:USB HID core driver
[    5.370645] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:23:54:d6:f1:ef
[    5.370649] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
[    5.477134] PM: Starting manual resume from disk
[    5.477137] PM: Resume from partition 8:5
[    5.477138] PM: Checking hibernation image.
[    5.477233] PM: Resume from disk failed.
[    5.526926] kjournald starting.  Commit interval 5 seconds
[    5.526934] EXT3-fs: mounted filesystem with ordered data mode.
[    9.715659] udev: starting version 141
[   10.063258] parport_pc 00:05: reported by Plug and Play ACPI
[   10.063304] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   10.081343] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   10.139043] ppdev: user-space parallel port driver
[   10.205310] cfg80211: Calling CRDA to update world regulatory domain
[   10.448513] cfg80211: World regulatory domain updated:
[   10.448515] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.448517] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.448519] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.448520] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.448522] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.448523] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.498620] ath9k: 0.1
[   10.499074] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
[   10.499077] ath9k 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17
[   10.581235] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[   10.581627] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[   10.581630] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[   10.581669] HDA Intel 0000:00:07.0: setting latency timer to 64
[   10.923512] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   10.949897] Registered led device: ath9k-phy0:radio
[   10.949910] Registered led device: ath9k-phy0:assoc
[   10.949921] Registered led device: ath9k-phy0:tx
[   10.949932] Registered led device: ath9k-phy0:rx
[   10.950495] phy0: Atheros 5416: mem=0xffffc20010200000, irq=17
[   11.515568] lp0: using parport0 (interrupt-driven).
[   11.567867] Adding 12699340k swap on /dev/sda5.  Priority:-1 extents:1 across:12699340k
[   12.093285] EXT3 FS on sda1, internal journal
[   12.907819] type=1505 audit(1241395619.248:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2393
[   12.933788] type=1505 audit(1241395619.276:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2397
[   12.933848] type=1505 audit(1241395619.276:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2397
[   12.933875] type=1505 audit(1241395619.276:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2397
[   12.933899] type=1505 audit(1241395619.276:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2397
[   13.005985] type=1505 audit(1241395619.348:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2402
[   13.006083] type=1505 audit(1241395619.348:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2402
[   13.022524] type=1505 audit(1241395619.364:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2406
[   15.671566] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.671568] Bluetooth: BNEP filters: protocol multicast
[   15.690691] Bridge firewalling registered
[   21.655486] forcedeth 0000:00:0a.0: irq 2299 for MSI/MSI-X
[   21.678411] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   31.720257] eth0: no IPv6 routers present
[  136.613506] ppdev0: registered pardevice
[  136.657302] ppdev0: unregistered pardevice
[  136.735968] ppdev0: registered pardevice
[  136.780124] ppdev0: unregistered pardevice
[  136.794653] ppdev0: registered pardevice
[  136.841981] ppdev0: unregistered pardevice
[  432.500376] CE: hpet increasing min_delta_ns to 15000 nsec

No firmware errors.

Kernel version:

Code:

2.6.28-11-generic

Really hope this helps

05-04-2009	#9 (permalink)
waterhead Trusted Penguin Join Date: Jul 2004 Location: Franklin, Wisconsin Posts: 3,957	Thanks. I see that the error is a bit different, I don't see the "disassociating by local choice (reason=3)" error. Did you try right-clicking the NetworkManager icon (next to the date/Time), and make sure Wireless is enabled. I don't think Ubuntu has many network setup options, so there isn't a whole lot to do. The backports-modules package can be installed using apt. Code: sudo apt-get install linux-backports-modules-jaunty You then may need to go into the Drivers Manager to enable the driver of choice. Then reboot If it still won't work, there is no need to try the compat-wireless drivers again. You know those don't work either. I would try the Madwifi driver. If it isn't part of the backports package, then you should install it from the source. The driver is usually named ath_pci. __________________ Paul Please do not PM me with requests for help. I will not reply.

05-04-2009	#10 (permalink)
waterhead Trusted Penguin Join Date: Jul 2004 Location: Franklin, Wisconsin Posts: 3,957	One other thing that I noticed. Code: [ 10.950495] phy0: Atheros 5416: mem=0xffffc20010200000, irq=17 It is identifying it as a 5416 chip, so that is why the ath9k driver is loading. Are you able to actually look at the card to see if this is correct?. __________________ Paul Please do not PM me with requests for help. I will not reply.

Are you a Linux Guru who is willing to share your in-depth Linux knowledge? Try our new Article submission system.