Results 1 to 4 of 4
I just installed said OS on my HP dv3000 (2GHz intel centrino, 4Gb RAM) with no problem, however when I open the browser (or anything else that requires internet including ...
- 05-12-2009 #1Just Joined!
- Join Date
- May 2009
- Posts
- 3
Connectivity issues in Fedora 10 KDE
I just installed said OS on my HP dv3000 (2GHz intel centrino, 4Gb RAM) with no problem, however when I open the browser (or anything else that requires internet including the twitter widget) the connection cannot be found. The wireless card seems to be working fine as I am notified when it has connected to my network. I have restarted the modem and the router, but the problem seems to be internal.
I will provide lspci upon req. but I am hoping this is a quick fix as the internet (if nothing else) worked fine on Mint.
- 05-12-2009 #2Trusted Penguin
- Join Date
- Feb 2008
- Location
- Kentucky
- Posts
- 3,662
Hello and Welcome!
Depending on the wireless chipset you may just need to install the firmware.
Take a look at this this page, and post back with the info.Jay
New users, read this first.
Registered Linux User #463940
I do not respond to Private Messages asking for Linux help. Please, keep it on the public boards.
- 05-13-2009 #3Just Joined!
- Join Date
- May 2009
- Posts
- 3
Originally Posted by jayd512 
Code:[Matthew@lap****intop ~]$ lsmod Module Size Used by nls_utf8 5632 1 vfat 12672 1 fat 42784 1 vfat usb_storage 82440 1 rfcomm 33936 4 bridge 43668 0 stp 6148 1 bridge bnep 14848 2 sco 12932 2 l2cap 21504 16 rfcomm,bnep sunrpc 155924 3 ip6t_REJECT 7296 2 nf_conntrack_ipv6 15864 2 ip6table_filter 6400 1 ip6_tables 14736 1 ip6table_filter ipv6 230132 24 ip6t_REJECT,nf_conntrack_ipv6 cpufreq_ondemand 9996 1 acpi_cpufreq 12172 1 dm_multipath 17164 0 uinput 10624 0 snd_hda_intel 351124 3 snd_seq_dummy 6660 0 snd_seq_oss 30364 0 snd_seq_midi_event 9600 1 snd_seq_oss snd_seq 48576 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 10124 3 snd_seq_dummy,snd_seq_oss,snd_seq arc4 5760 2 ecb 6528 2 snd_pcm_oss 42496 0 crypto_blkcipher 18052 1 ecb snd_mixer_oss 16896 1 snd_pcm_oss snd_pcm 65924 2 snd_hda_intel,snd_pcm_oss iwlagn 138884 0 uvcvideo 50184 0 iwlcore 115524 1 iwlagn i2c_i801 12048 0 snd_timer 22024 2 snd_seq,snd_pcm snd_page_alloc 11016 2 snd_hda_intel,snd_pcm compat_ioctl32 5120 1 uvcvideo snd_hwdep 10500 1 snd_hda_intel i2c_core 21396 1 i2c_i801 videodev 32000 1 uvcvideo btusb 14360 3 pcspkr 6272 0 snd 50616 16 snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep rfkill 11288 2 iwlcore v4l1_compat 15876 2 uvcvideo,videodev joydev 12736 0 serio_raw 8836 0 r8169 32132 0 mac80211 173668 2 iwlagn,iwlcore bluetooth 48608 11 rfcomm,bnep,sco,l2cap,btusb video 20244 0 mii 8192 1 r8169 output 6528 1 video soundcore 9416 1 snd cfg80211 23816 3 iwlagn,iwlcore,mac80211 wmi 9768 0
This next one is huge. I hope you have scroll bars.Code:[Matthew@lap****intop ~]$ /sbin/lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Cantiga Memory Controller Hub [8086:2a40] (rev 07) 00:01.0 PCI bridge [0604]: Intel Corporation Cantiga PCI Express Graphics Port [8086:2a41] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:06e9] (rev a1) 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) 03:00.0 Network controller [0280]: Intel Corporation Device [8086:4237]
And last.Code:[Matthew@lap****intop ~]$ dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.5-117.fc10.i686 (mockbuild@x86-7.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 12:19:59 EST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bcbbc000 (usable) BIOS-e820: 00000000bcbbc000 - 00000000bcbbf000 (ACPI NVS) BIOS-e820: 00000000bcbbf000 - 00000000bde6b000 (usable) BIOS-e820: 00000000bde6b000 - 00000000bdebf000 (reserved) BIOS-e820: 00000000bdebf000 - 00000000bdf86000 (usable) BIOS-e820: 00000000bdf86000 - 00000000bdfbf000 (ACPI NVS) BIOS-e820: 00000000bdfbf000 - 00000000bdfe1000 (usable) BIOS-e820: 00000000bdfe1000 - 00000000bdff6000 (ACPI data) BIOS-e820: 00000000bdff6000 - 00000000be000000 (usable) BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) last_pfn = 0xbe000 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 Using x86 segment limits to approximate NX protection RAMDISK: 37c70000 - 37fef544 DMI 2.4 present. ACPI: RSDP 000FE020, 0024 (r2 HP ) ACPI: XSDT BDFF5120, 0064 (r1 HPQOEM SLIC-MPC 1 1000013) ACPI: FACP BDFE2000, 00F4 (r4 HP DIABLO 1 MSFT 1000013) ACPI: DSDT BDFE5000, A519 (r1 HP DIABLO 1 MSFT 1000013) ACPI: FACS BDF92000, 0040 ACPI: HPET BDFF3000, 0038 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013) ACPI: APIC BDFF2000, 006C (r2 HPQOEM SLIC-MPC 1 MSFT 1000013) ACPI: MCFG BDFF1000, 003C (r1 HPQOEM SLIC-MPC 1 MSFT 1000013) ACPI: ASF! BDFF0000, 00A5 (r32 HPQOEM SLIC-MPC 1 MSFT 1000013) ACPI: SLIC BDFE4000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR 0) ACPI: BOOT BDFE3000, 0028 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013) ACPI: SSDT BDFE1000, 0655 (r1 PmRef CpuPm 3000 INTL 20051117) ACPI: DMI detected: Hewlett-Packard 2144MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000097116c] TEXT DATA BSS ==> [0000400000 - 000097116c] #4 [0037c70000 - 0037fef544] RAMDISK ==> [0037c70000 - 0037fef544] #5 [0000972000 - 0000976000] INIT_PG_TABLE ==> [0000972000 - 0000976000] #6 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x000be000 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x000bcbbc 0: 0x000bcbbf -> 0x000bde6b 0: 0x000bdebf -> 0x000bdf86 0: 0x000bdfbf -> 0x000bdfe1 0: 0x000bdff6 -> 0x000be000 On node 0 totalpages: 777977 free_area_init_node: node 0, pgdat c07f2900, node_mem_map c1000000 DMA zone: 3966 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 544411 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at c4000000 (gap: c0000000:38000000) PERCPU: Allocating 41372 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771897 Kernel command line: ro root=UUID=3301296f-cdb9-4f9f-b7e2-d0051cbc8732 rhgb quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c089e000 soft=c087e000 PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1995.196 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3076356k/3112960k available (2732k kernel code, 34624k reserved, 1420k data, 412k init, 2194796k highmem) virtual kernel memory layout: fixmap : 0xffc57000 - 0xfffff000 (3744 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0814000 - 0xc087b000 ( 412 kB) .data : 0xc06ab266 - 0xc080e610 (1420 kB) .text : 0xc0400000 - 0xc06ab266 (2732 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.39 BogoMIPS (lpj=1995196) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 CPU 1 irqstacks, hard=c089f000 soft=c087f000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.26 BogoMIPS (lpj=1995133) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7980.65 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=3268 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware Time: 8:24:06 Date: 05/12/09 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [60e0, 60ff] PCI: 0000:00:1a.1 reg 20 io port: [60c0, 60df] PCI: 0000:00:1a.7 reg 10 32bit mmio: [d9304c00, d9304fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [d9300000, d9303fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [60a0, 60bf] PCI: 0000:00:1d.1 reg 20 io port: [6080, 609f] PCI: 0000:00:1d.2 reg 20 io port: [6060, 607f] PCI: 0000:00:1d.3 reg 20 io port: [6040, 605f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [d9304800, d9304bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled PCI: 0000:00:1f.2 reg 10 io port: [6108, 610f] PCI: 0000:00:1f.2 reg 14 io port: [6114, 6117] PCI: 0000:00:1f.2 reg 18 io port: [6100, 6107] PCI: 0000:00:1f.2 reg 1c io port: [6110, 6113] PCI: 0000:00:1f.2 reg 20 io port: [6020, 603f] PCI: 0000:00:1f.2 reg 24 32bit mmio: [d9304000, d93047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 10 64bit mmio: [d9305000, d93050ff] PCI: 0000:00:1f.3 reg 20 io port: [6000, 601f] PCI: 0000:01:00.0 reg 10 32bit mmio: [d2000000, d2ffffff] PCI: 0000:01:00.0 reg 14 64bit mmio: [c0000000, cfffffff] PCI: 0000:01:00.0 reg 1c 64bit mmio: [d0000000, d1ffffff] PCI: 0000:01:00.0 reg 24 io port: [5000, 507f] PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff] PCI: bridge 0000:00:01.0 io port: [5000, 5fff] PCI: bridge 0000:00:01.0 32bit mmio: [d0000000, d2ffffff] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff] PCI: 0000:02:00.0 reg 10 io port: [3000, 30ff] PCI: 0000:02:00.0 reg 18 64bit mmio: [d8200000, d8200fff] PCI: 0000:02:00.0 reg 20 64bit mmio: [d3000000, d300ffff] PCI: 0000:02:00.0 reg 30 32bit mmio: [fffe0000, ffffffff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: supports D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled PCI: bridge 0000:00:1c.0 io port: [3000, 4fff] PCI: bridge 0000:00:1c.0 32bit mmio: [d8200000, d92fffff] PCI: bridge 0000:00:1c.0 64bit mmio pref: [d3000000, d40fffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [d7100000, d7101fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled PCI: bridge 0000:00:1c.1 io port: [2000, 2fff] PCI: bridge 0000:00:1c.1 32bit mmio: [d7100000, d81fffff] PCI: bridge 0000:00:1c.1 64bit mmio pref: [d4100000, d50fffff] PCI: bridge 0000:00:1c.5 io port: [1000, 1fff] PCI: bridge 0000:00:1c.5 32bit mmio: [d6100000, d70fffff] PCI: bridge 0000:00:1c.5 64bit mmio pref: [d5100000, d60fffff] pci 0000:00:1e.0: transparent bridge bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: Power Resource [FN00] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 7 (0x1000-0x1fff), disabling pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz tracer: 772 pages allocated for 65536 entries of 48 bytes actual entries 65620 ACPI: RTC can wake from S4 system 00:01: ioport range 0x600-0x60f has been reserved system 00:01: ioport range 0x610-0x610 has been reserved system 00:01: ioport range 0x800-0x80f has been reserved system 00:01: ioport range 0x810-0x817 has been reserved system 00:01: ioport range 0x820-0x823 has been reserved system 00:01: ioport range 0x400-0x47f has been reserved system 00:01: ioport range 0x700-0x73f has been reserved system 00:01: ioport range 0x500-0x501 has been reserved system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed10000-0xfed13fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x5000-0x5fff pci 0000:00:01.0: MEM window: 0xd0000000-0xd2ffffff pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x3000-0x4fff pci 0000:00:1c.0: MEM window: 0xd8200000-0xd92fffff pci 0000:00:1c.0: PREFETCH window: 0x000000d3000000-0x000000d40fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0xd7100000-0xd81fffff pci 0000:00:1c.1: PREFETCH window: 0x000000d4100000-0x000000d50fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: IO window: 0x1000-0x1fff pci 0000:00:1c.5: MEM window: 0xd6100000-0xd70fffff pci 0000:00:1c.5: PREFETCH window: 0x000000d5100000-0x000000d60fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.5: enabling device (0000 -> 0003) pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [5000, 5fff] bus: 01 index 1 mmio: [d0000000, d2ffffff] bus: 01 index 2 mmio: [c0000000, cfffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [3000, 4fff] bus: 02 index 1 mmio: [d8200000, d92fffff] bus: 02 index 2 mmio: [d3000000, d40fffff] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [2000, 2fff] bus: 03 index 1 mmio: [d7100000, d81fffff] bus: 03 index 2 mmio: [d4100000, d50fffff] bus: 03 index 3 mmio: [0, 0] bus: 05 index 0 io port: [1000, 1fff] bus: 05 index 1 mmio: [d6100000, d70fffff] bus: 05 index 2 mmio: [d5100000, d60fffff] bus: 05 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [0, 0] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 io port: [0, ffff] bus: 04 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 3581k freed Simple Boot Flag value 0x5 read from CMOS RAM was invalid Simple Boot Flag at 0x44 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1242116646.712:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1730 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie02: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) ACPI: Invalid PBLK length [8] ACPI: SSDT BDE76C98, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20051117) ACPI: SSDT BDE74618, 05B3 (r1 PmRef Cpu0Cst 3001 INTL 20051117) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device1 ACPI: Invalid PBLK length [8] ACPI: SSDT BDE75E18, 01CF (r1 PmRef ApIst 3000 INTL 20051117) ACPI: SSDT BDE76F18, 008D (r1 PmRef ApCst 3000 INTL 20051117) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device2 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ0] (57 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ1] (65 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304100 irq 19 ata2: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304180 irq 19 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304300 irq 19 ata6: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304380 irq 19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40F, max UDMA/100 ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HC09, max UDMA/100 ata2.00: configured for UDMA/100 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HC09 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd9304c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.5-117.fc10.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd9304800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.5-117.fc10.i686 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-4: new high speed USB device using ehci_hcd and address 2 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 22, io base 0x000060c0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-4: configuration #1 chosen from 1 choice usb 2-4: New USB device found, idVendor=10f1, idProduct=1a09 usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-4: Product: HP Webcam usb 2-4: Manufacturer: importek usb 2-4: SerialNumber: 27999168 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x000060a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=138a, idProduct=0001 usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-2: new full speed USB device using uhci_hcd and address 3 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 16, io base 0x00006060 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006040 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 3-2: configuration #1 chosen from 1 choice usb 3-2: New USB device found, idVendor=03f0, idProduct=171d usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: HP Integrated Module usb 3-2: Manufacturer: Broadcom Corp usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.27.5-117.fc10.i686 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.3 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 9:116:422 Freeing unused kernel memory: 412k freed Write protecting the kernel text: 2736k Write protecting the kernel read-only data: 1172k input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7 Clocksource tsc unstable (delta = -74959154 ns) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. type=1404 audit(1242116651.258:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 109076 rules. SELinux: 8192 avtab hash slots, 109076 rules. SELinux: 8 users, 11 roles, 2503 types, 119 bools, 1 sens, 1024 cats SELinux: 73 classes, 109076 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1242116651.424:3): policy loaded auid=4294967295 ses=4294967295 udevd version 127 started ACPI: WMI: Mapper loaded acpi device:03: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input8 Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: no MSI. Back to INTx. eth0: RTL8168c/8111c at 0xf8840000, 00:24:81:4a:87:0f, XID 3c4000c0 IRQ 16 input: PC Speaker as /devices/platform/pcspkr/input/input9 Bluetooth: Generic Bluetooth USB driver ver 0.3 usbcore: registered new interface driver btusb Linux video capture interface: v2.00 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0x6000-0x601f] conflicts with ACPI region SMBI [0x6000-0x600f] ACPI: Device needs an ACPI driver uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a09) input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:03:00.0: PCI INT A disabled phy0: Selected rate control algorithm 'iwl-agn-rs' HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0xb, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0 device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 5144568k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:5144568k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> firmware: requesting intel-ucode/06-17-06 firmware: requesting intel-ucode/06-17-06 Registered led device: iwl-phy0:TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:1d:7e:20:0b:2b wlan0: authenticated wlan0: associate with AP 00:1d:7e:20:0b:2b wlan0: RX AssocResp from 00:1d:7e:20:0b:2b (capab=0x401 status=0 aid=2) wlan0: associated wlan0: disassociating by local choice (reason=3) wlan0: associate with AP 00:1d:7e:20:0b:2b wlan0: RX ReassocResp from 00:1d:7e:20:0b:2b (capab=0x401 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: disassociating by local choice (reason=3) wlan0: no IPv6 routers present wlan0: associate with AP 00:1d:7e:20:0b:2b wlan0: authenticate with AP 00:22:75:20:2b:58 wlan0: authenticated wlan0: associate with AP 00:22:75:20:2b:58 wlan0: RX AssocResp from 00:22:75:20:2b:58 (capab=0x411 status=0 aid=1) wlan0: associated wlan0 (WE) : Wireless Event too big (338) wlan0: disassociating by local choice (reason=3) wlan0: deauthenticated wlan0: authenticate with AP 00:22:75:20:2b:58 wlan0: authenticated wlan0: associate with AP 00:22:75:20:2b:58 wlan0: RX AssocResp from 00:22:75:20:2b:58 (capab=0x411 status=0 aid=1) wlan0: associated wlan0 (WE) : Wireless Event too big (338) usb 2-3: new high speed USB device using ehci_hcd and address 3 usb 2-3: configuration #1 chosen from 1 choice input: Western Digital External HDD as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input11 input,hidraw0: USB HID v1.10 Device [Western Digital External HDD ] on usb-0000:00:1d.7-3 usb 2-3: New USB device found, idVendor=1058, idProduct=0705 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-3: Product: External HDD usb 2-3: Manufacturer: Western Digital usb 2-3: SerialNumber: 57442D575845393038453430343735 Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access WD 2500BEV External 1.75 PQ: 0 ANSI: 4 sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 6:0:0:0: [sdb] Attached SCSI disk sd 6:0:0:0: Attached scsi generic sg2 type 0 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec CE: hpet increasing min_delta_ns to 22500 nsec CE: hpet increasing min_delta_ns to 33750 nsec wlan0: disassociating by local choice (reason=3) wlan0: deauthenticated wlan0: authenticate with AP 00:22:75:20:2b:58 wlan0: authenticated wlan0: associate with AP 00:22:75:20:2b:58 wlan0: RX AssocResp from 00:22:75:20:2b:58 (capab=0x411 status=0 aid=1) wlan0: associated wlan0 (WE) : Wireless Event too big (338) r8169: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present r8169: eth0: link down r8169: eth0: link up r8169: eth0: link down
Code:Matthew@lap****intop ~]$ dmesg | grep firmware firmware: requesting intel-ucode/06-17-06 firmware: requesting intel-ucode/06-17-06 firmware: requesting iwlwifi-5000-1.ucode
- 05-13-2009 #4Trusted Penguin
- Join Date
- Feb 2008
- Location
- Kentucky
- Posts
- 3,662
Looks like the right modules are there, and the card is detected properly. What is the output of
Intel wireless is well supported. You might be able to just add the wireless card as a new connection in your network manager. I'm not at all familiar with the KDE layout, so you'll have to poke around for that in your system menu.Code:ifconfig -a
Jay
New users, read this first.
Registered Linux User #463940
I do not respond to Private Messages asking for Linux help. Please, keep it on the public boards.
Reply With Quote 
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
