Find the answer to your Linux question:
Page 2 of 5 FirstFirst 1 2 3 4 5 LastLast
Results 11 to 20 of 44
And which one did you download? Are you sure you have the right one for your kernel? You can find out what kernel you have with uname -r...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651

    And which one did you download? Are you sure you have the right one for your kernel?

    You can find out what kernel you have with uname -r

  2. #12
    Just Joined!
    Join Date
    Jul 2009
    Location
    Tyler, Tx
    Posts
    21
    Do you know where i put it? I put it in lib/firmware but its not being noticed there,
    I get the "cannot find firmware" error when doing dmesg | grep firmware

    EDIT: Ok I learned where to put it , but it does nothing when i do the dmesg | grep firmware, it just goes to the next line which i find odd
    So I get the "ERROR while finding interface flags" error when i do ifconfig wlan0 (or eth1, or ath0) up.
    I have no clue what im doing wrong

  3. #13
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    Try rebooting after installing the firmware. When you run the dmesg | grep firmware command, and it returns an empty prompt, that means there is no firmware message.

    You maybe should post the entire output of this command:
    Code:
    dmesg
    It is big, so scroll back and copy it all. There may be some clued as to what is wrong.

    It is also possible that you still are using the wrong firmware.
    Please do not send Private Messages to me with requests for help. I will not reply.

  4. #14
    Just Joined!
    Join Date
    Jul 2009
    Location
    Tyler, Tx
    Posts
    21
    root@slax:~# dmesg
    Linux version 2.6.27.8 (root@darkstar) (gcc version 4.2.4) #1 SMP Sun Apr 12 22:55:24 Local time zone must be set--see zic
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
    BIOS-e820: 0000000000100000 - 000000000bfec000 (usable)
    BIOS-e820: 000000000bfec000 - 000000000bff0000 (reserved)
    BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved)
    BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    DMI 2.3 present.
    last_pfn = 0xbfec max_arch_pfn = 0x100000
    kernel direct mapping tables up to bfec000 @ 7000-d000
    RAMDISK: 0bd66000 - 0bfeb5cd
    ACPI: RSDP 000F3960, 0014 (r0 DELL )
    ACPI: RSDT 0BFF0000, 0028 (r1 DELL CPi A 27D00C08 ASL 61)
    ACPI: FACP 0BFF0400, 0074 (r1 DELL CPi A 27D00C08 ASL 61)
    ACPI: DSDT 0BFF0800, 28FC (r1 INT430 SYSFexxx 1001 MSFT 100000C)
    ACPI: FACS 0BFFF800, 0040
    0MB HIGHMEM available.
    191MB LOWMEM available.
    mapped low ram: 0 - 0bfec000
    low ram: 00000000 - 0bfec000
    bootmap 00002000 - 00003800
    (9 early reservations) ==> bootmem [0000000000 - 000bfec000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 0000972b10] TEXT DATA BSS ==> [0000100000 - 0000972b10]
    #4 [000bd66000 - 000bfeb5cd] RAMDISK ==> [000bd66000 - 000bfeb5cd]
    #5 [0000973000 - 0000977000] INIT_PG_TABLE ==> [0000973000 - 0000977000]
    #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0000bfec
    HighMem 0x0000bfec -> 0x0000bfec
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0000bfec
    On node 0 totalpages: 49035
    free_area_init_node: node 0, pgdat c087d980, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 44684 pages, LIFO batch:7
    ACPI: PM-Timer IO Port: 0x808
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01181000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000
    PM: Registered nosave memory: 00000000000c0000 - 00000000000cc000
    PM: Registered nosave memory: 00000000000cc000 - 0000000000100000
    Allocating PCI resources starting at 20000000 (gap: 10100000:efd00000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 48651
    Kernel command line: initrd=/boot/initrd.gz ramdisk_size=6666 root=/dev/ram0 rw autoexec=/boot/pxelinux.cfg/start;/boot/pxelinux.cfg/web/start;xconf;telinit~4 BOOT_IMAGE=/boot/vmlinuz
    Enabling fast FPU save and restore... done.
    Initializing CPU#0
    PID hash table entries: 1024 (order: 10, 4096 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PMTIMER calibration value
    Detected 363.958 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 182904k/196528k available (5818k kernel code, 13140k reserved, 1946k data, 388k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffe18000 - 0xfffff000 (1948 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xcc800000 - 0xff7fe000 ( 815 MB)
    lowmem : 0xc0000000 - 0xcbfec000 ( 191 MB)
    .init : 0xc08a1000 - 0xc0902000 ( 388 kB)
    .data : 0xc06ae8f7 - 0xc08950f8 (1946 kB)
    .text : 0xc0100000 - 0xc06ae8f7 (5818 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 727.91 BogoMIPS (lpj=1455832)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 34k freed
    ACPI: Core revision 20080609
    ACPI: setting ELCR to 0200 (from 0820)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (727.91 BogoMIPS).
    net_namespace: 768 bytes
    xor: measuring software checksum speed
    8regs : 663.000 MB/sec
    8regs_prefetch: 564.000 MB/sec
    32regs : 323.000 MB/sec
    32regs_prefetch: 304.000 MB/sec
    pII_mmx : 955.000 MB/sec
    p5_mmx : 985.000 MB/sec
    xor: using function: p5_mmx (985.000 MB/sec)
    NET: Registered protocol family 16
    ACPI: ACPI Dock Station Driver
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfc0ee, last bus=1
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
    PCI: 0000:00:03.0 reg 10 32bit mmio: [0, fff]
    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2
    pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:03.0: PME# disabled
    PCI: 0000:00:03.1 reg 10 32bit mmio: [0, fff]
    pci 0000:00:03.1: supports D1
    pci 0000:00:03.1: supports D2
    pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:03.1: PME# disabled
    PCI: 0000:00:07.1 reg 20 io port: [860, 86f]
    PCI: 0000:00:07.2 reg 20 io port: [ece0, ecff]
    * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
    * this clock source is slow. Consider trying other clock sources
    pci 0000:00:07.3: quirk: region 0800-083f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 0840-084f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres B PIO at 00e0-00e7
    pci 0000:00:07.3: PIIX4 devres C PIO at 0850-085f
    PCI: 0000:01:00.0 reg 10 32bit mmio: [f9000000, f9ffffff]
    PCI: 0000:01:00.0 reg 14 32bit mmio: [fdc00000, fdffffff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [fdb00000, fdbfffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: 0000:01:00.1 reg 10 32bit mmio: [f8c00000, f8ffffff]
    PCI: 0000:01:00.1 reg 14 32bit mmio: [fda00000, fdafffff]
    PCI: bridge 0000:00:01.0 io port: [c000, cfff]
    PCI: bridge 0000:00:01.0 32bit mmio: [fd000000, feffffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, f9ffffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: Power Resource [PADA] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:07.3 BAR 7 (0x800-0x83f), disabling
    pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:07.3 BAR 7 (0x800-0x83f), disabling
    pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:07.3 BAR 7 (0x800-0x83f), disabling
    pnp 00:03: io resource (0x810-0x83f) overlaps 0000:00:07.3 BAR 7 (0x800-0x83f), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    system 00:00: iomem range 0x0-0x9fbff could not be reserved
    system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
    system 00:00: iomem range 0xc0000-0xcffff could not be reserved
    system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    system 00:00: iomem range 0x100000-0xbfeffff could not be reserved
    system 00:00: iomem range 0xbff0000-0xbffffff has been reserved
    system 00:00: iomem range 0x100a0000-0x100fffff could not be reserved
    system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved
    system 00:02: ioport range 0x4d0-0x4d1 has been reserved
    system 00:02: ioport range 0x854-0x855 has been reserved
    system 00:03: ioport range 0x850-0x853 has been reserved
    system 00:03: ioport range 0x856-0x85f has been reserved
    system 00:03: ioport range 0x840-0x84f has been reserved
    system 00:04: ioport range 0xf400-0xf4fe has been reserved
    system 00:04: iomem range 0xed000000-0xedffffff has been reserved
    system 00:09: ioport range 0x3f0-0x3f1 has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0xc000-0xcfff
    pci 0000:00:01.0: MEM window: 0xfd000000-0xfeffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000f9ffffff
    pci 0000:00:03.0: CardBus bridge, secondary bus 0000:02
    pci 0000:00:03.0: IO window: 0x001000-0x0010ff
    pci 0000:00:03.0: IO window: 0x001400-0x0014ff
    pci 0000:00:03.0: PREFETCH window: 0x20000000-0x23ffffff
    pci 0000:00:03.0: MEM window: 0x24000000-0x27ffffff
    pci 0000:00:03.1: CardBus bridge, secondary bus 0000:06
    pci 0000:00:03.1: IO window: 0x001800-0x0018ff
    pci 0000:00:03.1: IO window: 0x001c00-0x001cff
    pci 0000:00:03.1: PREFETCH window: 0x28000000-0x2bffffff
    pci 0000:00:03.1: MEM window: 0x2c000000-0x2fffffff
    pci 0000:00:03.0: enabling device (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:03.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.1: enabling device (0000 -> 0003)
    pci 0000:00:03.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [c000, cfff]
    bus: 01 index 1 mmio: [fd000000, feffffff]
    bus: 01 index 2 mmio: [f8000000, f9ffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [1000, 10ff]
    bus: 02 index 1 io port: [1400, 14ff]
    bus: 02 index 2 mmio: [20000000, 23ffffff]
    bus: 02 index 3 mmio: [24000000, 27ffffff]
    bus: 06 index 0 io port: [1800, 18ff]
    bus: 06 index 1 io port: [1c00, 1cff]
    bus: 06 index 2 mmio: [28000000, 2bffffff]
    bus: 06 index 3 mmio: [2c000000, 2fffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP reno registered
    NET: Registered protocol family 1
    checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
    Freeing initrd memory: 2581k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    NTFS driver 2.1.29 [Flags: R/O].
    JFS: nTxBlock = 1450, nTxLock = 11601
    SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
    SGI XFS Quota Management subsystem
    GFS2 (built Apr 12 2009 22:51:45) installed
    msgmni has been set to 362
    async_tx: api initialized (sync-only)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:01:00.0: Boot video device
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery absent)
    ACPI: Battery Slot [BAT1] (battery absent)
    input: Lid Switch as /class/input/input0
    ACPI: Lid Switch [LID]
    input: Power Button (CM) as /class/input/input1
    ACPI: Power Button (CM) [PBTN]
    input: Sleep Button (CM) as /class/input/input2
    ACPI: Sleep Button (CM) [SBTN]
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    processor ACPI0007:00: registered as cooling_device0
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM] (44 C)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    Marking TSC unstable due to possible TSC halt in C2
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Floppy drive(s): fd0 is 1.44M
    Clocksource tsc unstable (delta = -218000683 ns)
    FDC 0 is a post-1991 82077
    brd: module loaded
    loop: module loaded
    Compaq SMART2 Driver (v 2.6.0)
    HP CISS Driver (v 3.6.20)
    Uniform Multi-Platform E-IDE driver
    piix 0000:00:07.1: IDE controller (0x8086:0x7111 rev 0x01)
    piix 0000:00:07.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0860-0x0867
    ide1: BM-DMA at 0x0868-0x086f
    Probing IDE interface ide0...
    hda: SanDisk SDCFB-1024, CFA DISK drive
    hda: host max PIO4 wanted PIO255(auto-tune) selected PIO2
    hda: MWDMA2 mode selected
    Probing IDE interface ide1...
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63
    hda: hda1
    ide-floppy driver 1.00
    Loading iSCSI transport class v2.0-870.
    iscsi: registered transport (tcp)
    Loading Adaptec I2O RAID: Version 2.4 Build 5go
    Detecting Adaptec I2O RAID controllers...
    Adaptec aacraid driver 1.1-5[2456]-ms
    aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
    scsi: <fdomain> Detection failed (no card)
    sym53c416.c: Version 1.0.0-ac
    qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
    iscsi: registered transport (qla4xxx)
    QLogic iSCSI HBA Driver
    Emulex LightPulse Fibre Channel SCSI driver 8.2.7
    Copyright(c) 2004-2008 Emulex. All rights reserved.
    Failed initialization of WD-7000 SCSI card!
    DC390: clustering now enabled by default. If you get problems load
    with "disable_clustering=1" and report to maintainers
    megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
    megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
    megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
    GDT-HA: Storage RAID Controller Driver. Version: 3.05
    3ware Storage Controller device driver for Linux v1.26.02.002.
    3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
    nsp32: loading...
    ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
    RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
    st: Version 20080504, fixed bufsize 32768, s/g segs 256
    Driver 'st' needs updating - please use bus_type methods
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    I2O subsystem v1.325
    i2o: max drivers = 8
    I2O Configuration OSM v1.323
    I2O Bus Adapter OSM v1.317
    I2O Block Device OSM v1.325
    I2O SCSI Peripheral OSM v1.316
    I2O ProcFS OSM v1.316
    Fusion MPT base driver 3.04.07
    Copyright (c) 1999-2008 LSI Corporation
    Fusion MPT SPI Host driver 3.04.07
    Fusion MPT FC Host driver 3.04.07
    Fusion MPT SAS Host driver 3.04.07
    usbmon: debugfs is not available
    116x: driver isp116x-hcd, 03 Nov 2005
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 11, io base 0x0000ece0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    sl811: driver sl811-hcd, 19 May 2005
    Initializing USB Mass Storage driver...
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    usb 1-1.1: new full speed USB device using uhci_hcd and address 3
    usb 1-1.1: configuration #1 chosen from 1 choice
    usb 1-1.4: new full speed USB device using uhci_hcd and address 4
    usb 1-1.4: configuration #1 chosen from 1 choice
    scsi2 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 4
    usb-storage: waiting for device to settle before scanning
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    md: linear personality registered for level -1
    md: raid0 personality registered for level 0
    md: raid1 personality registered for level 1
    md: raid10 personality registered for level 10
    raid6: int32x1 101 MB/s
    raid6: int32x2 108 MB/s
    raid6: int32x4 93 MB/s
    raid6: int32x8 96 MB/s
    raid6: mmxx1 312 MB/s
    raid6: mmxx2 359 MB/s
    raid6: using algorithm mmxx2 (359 MB/s)
    md: raid6 personality registered for level 6
    md: raid5 personality registered for level 5
    md: raid4 personality registered for level 4
    md: multipath personality registered for level -4
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    TCP cubic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 17
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    Using IPI No-Shortcut mode
    input: AT Translated Set 2 keyboard as /class/input/input3
    md: Autodetecting RAID arrays.
    md: Scanned 0 and added 0 devices.
    md: autorun ...
    md: ... autorun DONE.
    RAMDISK: Compressed image found at block 0
    EXT4-fs warning (device ram0): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs.

    EXT4-fs: ram0: not marked OK to use with test code.
    VFS: Mounted root (ext2 filesystem).
    Freeing unused kernel memory: 388k freed
    squashfs: version 3.4 (2008/08/26) Phillip Lougher
    squashfs: LZMA suppport for slax.org by jro
    aufs 20081208
    fuse init (API version 7.9)
    Yenta: CardBus bridge found at 0000:00:03.0 [1028:0088]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x66
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000006
    Yenta: CardBus bridge found at 0000:00:03.1 [1028:0088]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x66
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000006
    UDF-fs: No VRS found
    GFS2: Unrecognized block device or mount point /dev/hda
    GFS2: gfs2 mount does not exist
    UDF-fs: No VRS found
    GFS2: Unrecognized block device or mount point /dev/hda
    GFS2: gfs2 mount does not exist
    scsi 2:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS
    sd 2:0:0:0: [sda] 7862911 512-byte hardware sectors (4026 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 45 00 00 08
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sd 2:0:0:0: [sda] 7862911 512-byte hardware sectors (4026 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 45 00 00 08
    sd 2:0:0:0: [sda] Assuming drive cache: write through
    sda: sda1
    sd 2:0:0:0: [sda] Attached SCSI removable disk
    usb-storage: device scan complete
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    request region #1
    isp1760: probe of 0000:00:07.3 failed with error -16
    piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x840, revision 0
    parport_pc 00:0e: reported by Plug and Play ACPI
    parport0: PC-style at 0x378 (0x77, irq 7 [PCSPP,TRISTATE]
    input: Video Bus as /class/input/input4
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    sd 2:0:0:0: Attached scsi generic sg0 type 0
    input: ImPS/2 Generic Wheel Mouse as /class/input/input5
    ppdev: user-space parallel port driver
    NeoMagic 256 0000:01:00.1: enabling device (0000 -> 0002)
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    NeoMagic 256 0000:01:00.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
    nm256: found card signature in video RAM: 0x27ec00
    nm256: Mapping port 1 from 0x2709a0 - 0x27ec00
    firmware: requesting isl3887usb_bare
    p54usb: cannot find firmware (isl3887usb_bare)!
    prism54usb: probe of 1-1.1:1.0 failed with error -2
    usbcore: registered new interface driver prism54usb
    end_request: I/O error, dev fd0, sector 0
    end_request: I/O error, dev fd0, sector 0
    Buffer I/O error on device fd0, logical block 0
    end_request: I/O error, dev fd0, sector 0
    Buffer I/O error on device fd0, logical block 0
    input: PC Speaker as /class/input/input6
    lp0: using parport0 (interrupt-driven).
    lp0: console ready

  5. #15
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    I do see this in dmesg:
    Code:
    firmware: requesting isl3887usb_bare
    p54usb: cannot find firmware (isl3887usb_bare)!
    I was also looking for some info on the card itself. I gotta get back to work, so I'll check again during my lunch break.
    Please do not send Private Messages to me with requests for help. I will not reply.

  6. #16
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    Looking at the p54 linux wireless site that I posted, there is a download for isl3887usb_bare for kernel 2.6.28, and kernels older 2.6.28. Check which kernel you're running with the uname command I mentioned, download that one, and rename to isl3887usb_bare. Put that in /lib/firmware/ and see if it works.

  7. #17
    Just Joined!
    Join Date
    Jul 2009
    Location
    Tyler, Tx
    Posts
    21
    Yes I did get that when i put it in lib/firmware and the root, it still doesnt work, i keep getting that error when I do put that in the correct directory with the correct name. I used both of the firmwares and neither worked

    @waterhead, yes I do get that message when i do
    dmesg | grep firmware

  8. #18
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    This site suggests /usr/lib/hotplug/firmware/

  9. #19
    Just Joined!
    Join Date
    Jul 2009
    Location
    Tyler, Tx
    Posts
    21
    Slax doesnt have that directory.

  10. #20
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    I don't know that any distro does by default. You can safely create it.

Page 2 of 5 FirstFirst 1 2 3 4 5 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •