Find the answer to your Linux question:
Results 1 to 6 of 6
Here is what i gt after running the bash file: Code: ============ lspci ============ 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10) Kernel modules: intel-agp ...
  1. 11-19-2009 #1
    Nakira
    Nakira is offline
    Just Joined!
    Join Date
    Aug 2007
    Location
    Staffordshire
    Posts
    97

    F5D8053 Belkin Wifi



    Here is what i gt after running the bash file:
    Code:
    ============ lspci ============
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10)
	Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 10)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
	Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
	Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
	Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
	Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
	Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
	Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01)
	Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
	Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce 9800 GTX] [10de:0612] (rev a2)
	Kernel driver in use: nvidia
	Kernel modules: nvidia, nvidiafb
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
	Kernel driver in use: r8169
	Kernel modules: r8169

============ lsusb ============
Bus 001 Device 004: ID 050d:815f Belkin Components 
Bus 001 Device 002: ID 0d8c:5200 C-Media Electronics, Inc. Mass Storage Controller(0D8C,5200)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

============ lsmod ============
Module                  Size  Used by
isofs                  31620  1 
udf                    80900  0 
crc_itu_t               1852  1 udf
binfmt_misc             8356  1 
ppdev                   6688  0 
iptable_filter          3100  0 
usblp                  12636  0 
ip_tables              11692  1 iptable_filter
x_tables               16544  1 ip_tables
snd_hda_codec_realtek   203328  1 
snd_hda_intel          26920  2 
snd_hda_codec          75708  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               7200  1 snd_hda_codec
snd_pcm_oss            37920  0 
snd_mixer_oss          16028  1 snd_pcm_oss
snd_pcm                75296  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           2656  0 
snd_seq_oss            28576  0 
snd_seq_midi            6432  0 
parport_pc             31940  1 
snd_rawmidi            22208  1 snd_seq_midi
snd_seq_midi_event      6940  2 snd_seq_oss,snd_seq_midi
nvidia               8873924  38 
snd_seq                50224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              22276  2 snd_pcm,snd_seq
snd_seq_device          6920  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    59204  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               7264  1 snd
snd_page_alloc          9156  2 snd_hda_intel,snd_pcm
lp                      8964  0 
parport                35340  3 ppdev,parport_pc,lp
usbhid                 38208  0 
floppy                 54916  0 
r8169                  32064  0 
mii                     5212  1 r8169
intel_agp              27484  0 
agpgart                34988  2 nvidia,intel_agp

============ dmesg-firmware ============

============ kernel version ============
2.6.31-15-generic

============ ifconfig ============
eth0      Link encap:Ethernet  HWaddr 00:1f:d0:09:6f:ad  
          inet addr:192.168.1.68  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::21f:d0ff:fe09:6fad/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2208 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2033 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1046971 (1.0 MB)  TX bytes:388545 (388.5 KB)
          Interrupt:27 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:146 errors:0 dropped:0 overruns:0 frame:0
          TX packets:146 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:16381 (16.3 KB)  TX bytes:16381 (16.3 KB)


============ iwconfig ============
    The usb card actually hasn't started up, i.e little blue light come on to say its getting power. Everything else works in my usb such as headset and iphone, but my belkin wifi card doesn't :S help please?


    Thanks in advance, josh.
    Reply With Quote Reply With Quote
  2. 11-19-2009 #2
    HROAdmin26
    HROAdmin26 is offline
    Linux Guru
    Join Date
    Nov 2007
    Posts
    1,679
    Code:
    Bus 001 Device 004: ID 050d:815f Belkin Components
    There is your USB wireless adapter.
    Reply With Quote Reply With Quote
  3. 11-20-2009 #3
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,570
    There is some info that says it will work with the Ralink RT2870USB driver. I cannot confirm this, but you can download and compile the driver to try it.

    Ralink corp.
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  4. 11-20-2009 #4
    Charles4809
    Charles4809 is offline
    Linux Newbie Charles4809's Avatar
    Join Date
    Nov 2008
    Location
    Utrecht, NL
    Posts
    134
    AFAIK it needs to have firmware installed as well.

    Charles
    Charles
    ASUS EEE Box B202, Atom 270 1,6GHz, 1 GB, HDD 80GB, XP-SP3 / PinguyOS
    Asus EEE PC 901 with Bodhi-Linux
    Reply With Quote Reply With Quote
  5. 11-20-2009 #5
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,570
    Quote Originally Posted by Charles4809 View Post
    AFAIK it needs to have firmware installed as well.

    Charles
    Thanks for the info.

    The firmware can be downloaded from the same site as the driver.
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  6. 11-20-2009 #6
    HROAdmin26
    HROAdmin26 is offline
    Linux Guru
    Join Date
    Nov 2007
    Posts
    1,679
    The USB ID string is *not* the same as previous Belkin wireless cards using the RT2870 chip.

    No one (online, that I can find) has confirmed that the V6 of this Belkin still uses the 2870 chip.

    If the OP can *correctly* install and test the RaLink driver, great. If not, he will hopefully have success with the (usually easier) XP driver + NDISwrapper.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules