Backtrack 4: SI0CSIFADDR: No such device eth0?

**HiddenShadow** · 01-18-2010

Yes, it does return an error. It says:

SI0CSIFFLAGS: No such file or directory

**jayd512** · 01-18-2010

Pretty sure that should still be

Code:

iwlist wmaster0 scan

You're right... I mis-typed it

**HiddenShadow** · 01-19-2010

That command has this output:

wmaster0 Interface doesn't support scanning.

**jayd512** · 01-19-2010

Kinda what I thought... I was just wondering.
Do you have your router set where it doesn't actually broadcast it's network name?

**HiddenShadow** · 01-19-2010

I'm pretty sure my router broadcasts the network name, and even if it didnt, theres lots of networks around me so I should see at least something. Also, im sitting very close to my router. I'm only in the next room.

**reed9** · 01-19-2010

SI0CSIFFLAGS: No such file or directory

The current problem is definitely not the router, as the above error indicates. Normally this would indicate a lack of firmware...we checked used grep to look for firmware messages and found none...I don't know.

Can you post the whole output of dmesg? (In code tags).

And the output of

Code:

ls /lib/firmware

**HiddenShadow** · 01-19-2010

I don't really know how to make those code tags.

Code:

Code:

dmesg

Output:
Linux version 2.6.30.9 (root@dev) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Tue Dec 1 21:51:08 EST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bde6b000 (usable)
 BIOS-e820: 00000000bde6b000 - 00000000bdebf000 (reserved)
 BIOS-e820: 00000000bdebf000 - 00000000bdf83000 (usable)
 BIOS-e820: 00000000bdf83000 - 00000000bdfbf000 (ACPI NVS)
 BIOS-e820: 00000000bdfbf000 - 00000000bdfde000 (usable)
 BIOS-e820: 00000000bdfde000 - 00000000bdff6000 (ACPI data)
 BIOS-e820: 00000000bdff6000 - 00000000bdffe000 (usable)
 BIOS-e820: 00000000bdffe000 - 00000000bdfff000 (ACPI data)
 BIOS-e820: 00000000bdfff000 - 00000000be000000 (usable)
 BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
DMI 2.4 present.
last_pfn = 0xbe000 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-EFFFF write-through
  F0000-FFFFF write-combining
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 0FFF00000 mask FFFF00000 write-protect
  2 base 080000000 mask FC0000000 write-back
  3 base 0BE000000 mask FFE000000 uncachable
  4 base 100000000 mask F80000000 write-back
  5 base 180000000 mask FC0000000 write-back
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 37ace000 - 37fef5a8
Allocated new RAMDISK: 009e9000 - 00f0a5a8
Move RAMDISK from 0000000037ace000 - 0000000037fef5a7 to 009e9000 - 00f0a5a7
ACPI: RSDP 000fe020 00024 (v02 HP    )
ACPI: XSDT bdffe120 00074 (v01 HPQOEM SLIC-MPC 00000001      01000013)
ACPI: FACP bdff3000 000F4 (v04 HP     BLADE    00000001 MSFT 01000013)
ACPI: DSDT bdfe3000 0B177 (v01 HP     BLADE    00000001 MSFT 01000013)
ACPI: FACS bdf8c000 00040
ACPI: DMAR bdff5000 00090 (v01                00000001      00000000)
ACPI: SSDT bdff4000 00655 (v01  PmRef    CpuPm 00003000 INTL 20060912)
ACPI: HPET bdff2000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC bdff1000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG bdff0000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: ASF! bdfef000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC bdfe2000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 000F4240)
ACPI: BOOT bdfe1000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT bdfe0000 00296 (v01 INTEL  SataAhci 00001000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
2152MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 00009e4374]    TEXT DATA BSS ==> [0000100000 - 00009e4374]
  #4 [000009e000 - 0000100000]    BIOS reserved ==> [000009e000 - 0000100000]
  #5 [00009e5000 - 00009e81c0]              BRK ==> [00009e5000 - 00009e81c0]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [00009e9000 - 0000f0a5a8]      NEW RAMDISK ==> [00009e9000 - 0000f0a5a8]
  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000be000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
    0: 0x00000000 -> 0x0000009e
    0: 0x00000100 -> 0x000bde6b
    0: 0x000bdebf -> 0x000bdf83
    0: 0x000bdfbf -> 0x000bdfde
    0: 0x000bdff6 -> 0x000bdffe
    0: 0x000bdfff -> 0x000be000
On node 0 totalpages: 777973
free_area_init_node: node 0, pgdat c08e7b40, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3966 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 4305 pages used for memmap
  HighMem zone: 546440 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c4000000 (gap: c0000000:38000000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 11 pages at c27d0000, static data 23068 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 771892
Kernel command line: root=UUID=78093d18-6e7a-489e-9616-edfa26b1d5d5 ro quiet vga=0x317
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2261.587 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:000be000)
Memory: 3071144k/3112960k available (6103k kernel code, 39768k reserved, 2103k data, 432k init, 2202980k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4f000 - 0xfffff000   ( 704 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc090d000 - 0xc0979000   ( 432 kB)
      .data : 0xc06f5dad - 0xc0903a44   (2103 kB)
      .text : 0xc0100000 - 0xc06f5dad   (6103 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4524.63 BogoMIPS (lpj=7538623)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     P7550  @ 2.26GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4524.89 BogoMIPS (lpj=7537433)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     P7550  @ 2.26GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9049.53 BogoMIPS).
net_namespace: 980 bytes
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  8668.800 MB/sec
xor: using function: pIII_sse (8668.800 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Enabling special treatment for EC from MSI.
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [FN00] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x70c0-0x70df]
pci 0000:00:1a.1: reg 20 io port: [0x70a0-0x70bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xdd004c00-0xdd004fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xdd000000-0xdd003fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x7080-0x709f]
pci 0000:00:1d.1: reg 20 io port: [0x7060-0x707f]
pci 0000:00:1d.2: reg 20 io port: [0x7040-0x705f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xdd004800-0xdd004bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x70e8-0x70ef]
pci 0000:00:1f.2: reg 14 io port: [0x70f4-0x70f7]
pci 0000:00:1f.2: reg 18 io port: [0x70e0-0x70e7]
pci 0000:00:1f.2: reg 1c io port: [0x70f0-0x70f3]
pci 0000:00:1f.2: reg 20 io port: [0x7020-0x703f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xdd004000-0xdd0047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xdd005000-0xdd0050ff]
pci 0000:00:1f.3: reg 20 io port: [0x7000-0x701f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:01:00.0: reg 24 io port: [0x6000-0x607f]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xdc000000-0xdcffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3000000-0xd3ffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xdb000000-0xdb001fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xdb000000-0xdbffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd4000000-0xd4ffffff]
pci 0000:04:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:04:00.0: reg 18 64bit mmio: [0xd5010000-0xd5010fff]
pci 0000:04:00.0: reg 20 64bit mmio: [0xd5000000-0xd500ffff]
pci 0000:04:00.0: reg 30 32bit mmio: [0xffff0000-0xffffffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xda000000-0xdaffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd5000000-0xd5ffffff]
pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xd9000000-0xd9ffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd6000000-0xd6ffffff]
pci 0000:00:1c.5: bridge io port: [0x1000-0x1fff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xd8000000-0xd8ffffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd7000000-0xd7ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1    832 MB/s
raid6: int32x2    863 MB/s
raid6: int32x4    666 MB/s
raid6: int32x8    630 MB/s
raid6: mmxx1     2816 MB/s
raid6: mmxx2     3216 MB/s
raid6: sse1x1    1917 MB/s
raid6: sse1x2    2465 MB/s
raid6: sse2x1    3464 MB/s
raid6: sse2x2    3874 MB/s
raid6: using algorithm sse2x2 (3874 MB/s)
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 7 (0x1000-0x1fff), disabling
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x600-0x60f has been reserved
system 00:01: ioport range 0x610-0x610 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x810-0x817 has been reserved
system 00:01: ioport range 0x820-0x823 has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x53f has been reserved
system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x6000-0x6fff
pci 0000:00:01.0:   MEM window: 0xd0000000-0xd2ffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
pci 0000:00:1c.0:   MEM window: 0xdc000000-0xdcffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000d3000000-0x000000d3ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
pci 0000:00:1c.2:   MEM window: 0xdb000000-0xdbffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000d4000000-0x000000d4ffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.3:   IO window: 0x3000-0x3fff
pci 0000:00:1c.3:   MEM window: 0xda000000-0xdaffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000d5000000-0x000000d5ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.4:   IO window: 0x2000-0x2fff
pci 0000:00:1c.4:   MEM window: 0xd9000000-0xd9ffffff
pci 0000:00:1c.4:   PREFETCH window: 0x000000d6000000-0x000000d6ffffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.5:   IO window: 0x1000-0x1fff
pci 0000:00:1c.5:   MEM window: 0xd8000000-0xd8ffffff
pci 0000:00:1c.5:   PREFETCH window: 0x000000d7000000-0x000000d7ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0x6000-0x6fff]
pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 0 io:  [0x5000-0x5fff]
pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdcffffff]
pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd3ffffff]
pci_bus 0000:03: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:03: resource 1 mem: [0xdb000000-0xdbffffff]
pci_bus 0000:03: resource 2 pref mem [0xd4000000-0xd4ffffff]
pci_bus 0000:04: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:04: resource 1 mem: [0xda000000-0xdaffffff]
pci_bus 0000:04: resource 2 pref mem [0xd5000000-0xd5ffffff]
pci_bus 0000:05: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:05: resource 1 mem: [0xd9000000-0xd9ffffff]
pci_bus 0000:05: resource 2 pref mem [0xd6000000-0xd6ffffff]
pci_bus 0000:06: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:06: resource 1 mem: [0xd8000000-0xd8ffffff]
pci_bus 0000:06: resource 2 pref mem [0xd7000000-0xd7ffffff]
pci_bus 0000:09: resource 3 io:  [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5253k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 1707
alg: No test for stdrng (krng)
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 29 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xd1000000, mapped to 0xf8080000, using 6144k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:cd10
vesafb: pmi: set display start = c00ccd73, set palette = c00ccdce
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 128150 bytes,<6>...found (1024x768, 128042 bytes, v3).
Console: switching to colour frame buffer device 107x34
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (off)
ACPI: SSDT bde6ec98 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT bde6c618 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT bde6de18 001CF (v01  PmRef    ApIst 00003000 INTL 20060912)
ACPI: SSDT bde6ef18 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (53 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ACPI: Battery Slot [BAT0] (battery present)
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /class/input/input4
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2461]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.03.01-k1
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.1
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.2 (January 21, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdd004000 port 0xdd004100 irq 30
ata2: SATA max UDMA/133 abar m2048@0xdd004000 port 0xdd004180 irq 30
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xdd004000 port 0xdd004300 irq 30
ata6: SATA max UDMA/133 abar m2048@0xdd004000 port 0xdd004380 irq 30
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.4
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 31 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xf89ea000, 00:26:22:b1:2f:a1, XID 3c4000c0 IRQ 31
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdd004c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdd004800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070c0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x000070a0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007080
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00007060
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007040
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input5
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OC70E, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/100
usb 2-5: new high speed USB device using ehci_hcd and address 3
scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
Clocksource tsc unstable (delta = -391979259 ns)
usb 2-5: configuration #1 chosen from 1 choice
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 5-2: new low speed USB device using uhci_hcd and address 2
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:01:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:02:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
ata2.00: ACPI cmd ef/10:04:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:05:00:00:00:b0 succeeded
ata2.00: ATAPI: hp       DVDRAM GT20L, DC05, max UDMA/100, ATAPI AN
ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:01:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:02:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
ata2.00: ACPI cmd ef/10:04:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
usb 5-2: configuration #1 chosen from 1 choice
scsi 3:0:0:0: CD-ROM            hp       DVDRAM GT20L     DC05 PQ: 0 ANSI: 5
input: Primax HP Wireless Laser Mini Mouse as /class/input/input6
generic-usb 0003:0461:4D2B.0001: input: USB HID v1.10 Mouse [Primax HP Wireless Laser Mini Mouse] on usb-0000:00:1d.0-2/input0
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 432k freed
fuse init (API version 7.11)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
PM: Starting manual resume from disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
udevd version 124 started
Linux agpgart interface v0.103
ACPI: WMI: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
acpi device:09: registered as cooling_device3
input: Video Bus as /class/input/input7
ACPI: Video Device [EVGA] (multi-head: yes  rom: no  post: no)
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
        (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
        (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
        (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
        (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
        (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
        (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
        (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
iTCO_vendor_support: vendor-support=0
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kd
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 1000 Series BGN REV=0x6C
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Webcam (090c:137b)
phy0: Selected rate control algorithm 'iwl-agn-rs'
cfg80211: Regulatory domain changed to country: US
        (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
        (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
        (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
        (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
        (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
        (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HP Webcam as /class/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: PS/2 Mouse as /class/input/input9
input: AlpsPS/2 ALPS GlidePoint as /class/input/input10
hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
input: HDA Intel Mic at Ext Front Jack as /class/input/input11
input: HDA Intel Mic at Sep UNKNOWN Jack as /class/input/input12
input: HDA Intel HP Out at Ext Front Jack as /class/input/input13
lp: driver loaded but no devices found
Adding 3903752k swap on /dev/sda6.  Priority:-1 extents:1 across:3903752k
EXT3 FS on sda5, internal journal
ip_tables: (C) 2000-2006 Netfilter Core Team
mtrr: base(0xd1000000) is not aligned on a size(0xe00000) boundary

**HiddenShadow** · 01-19-2010

Code: ls /lib/firmware

Code:

Output:
3com                                ess
acenic                              intelliport2.bin
acx                                 ipw2100-1.3-i.fw
adaptec                             ipw2100-1.3-p.fw
advansys                            ipw2100-1.3.fw
aic94xx-seq.fw                      ipw2200-bss.fw
atmel_at76c502-wpa.bin              ipw2200-ibss.fw
atmel_at76c502.bin                  ipw2200-sniffer.fw
atmel_at76c502_3com-wpa.bin         isl3877
atmel_at76c502_3com.bin             isl3886
atmel_at76c502d-wpa.bin             isl3887usb_bare
atmel_at76c502d.bin                 isl3890
atmel_at76c502e-wpa.bin             isl3890usb
atmel_at76c502e.bin                 iwlwifi-3945-2.ucode
atmel_at76c503-i3861.bin            iwlwifi-4965-2.ucode
atmel_at76c503-i3863.bin            iwlwifi-5000-1.ucode
atmel_at76c503-rfmd-0.90.2-140.bin  iwlwifi-5000-2.ucode
atmel_at76c503-rfmd-acc.bin         iwlwifi-5150-2.ucode
atmel_at76c503-rfmd.bin             kaweth
atmel_at76c504.bin                  keyspan_pda
atmel_at76c504_2958-wpa.bin         korg
atmel_at76c504a_2958-wpa.bin        mts_cdma.fw
atmel_at76c504c-wpa.bin             mts_edge.fw
atmel_at76c505-rfmd.bin             mts_gsm.fw
atmel_at76c505-rfmd2958.bin         ositech
atmel_at76c505a-rfmd2958.bin        ql2100_fw.bin
atmel_at76c506-wpa.bin              ql2200_fw.bin
atmel_at76c506.bin                  ql2300_fw.bin
av7110                              ql2322_fw.bin
b43                                 ql2400_fw.bin
b43legacy                           qlogic
bcm2033-fw.bin                      rt2561.bin
bcm2033-md.bin                      rt2561s.bin
bnx2                                rt2661.bin
cis                                 rt2860.bin
cpia2                               rt73.bin
cxgb3                               sb16
dabusb                              sun
dvb-fe-or51132-qam.fw               tehuti
dvb-fe-or51132-vsb.fw               ti_3410.fw
dvb-fe-or51211.fw                   ti_5052.fw
dvb-fe-tda10046.fw                  tigon
dvb-ttpci-01.fw                     v4l-cx23418-apu.fw
dvb-usb-avertv-a800-02.fw           v4l-cx23418-cpu.fw
dvb-usb-bluebird-01.fw              v4l-cx23418-dig.fw
dvb-usb-dib0700-1.10.fw             v4l-cx2341x-dec.fw
dvb-usb-dibusb-5.0.0.11.fw          v4l-cx2341x-enc.fw
dvb-usb-dibusb-6.0.0.8.fw           v4l-cx2341x-init.mpg
dvb-usb-dtt200u-01.fw               v4l-cx25840.fw
dvb-usb-tvwalkert.fw                v4l-pvrusb2-24xxx-01.fw
dvb-usb-umt-010-02.fw               v4l-pvrusb2-29xxx-01.fw
dvb-usb-vp702x-01.fw                vicam
dvb-usb-vp7045-01.fw                whiteheat.fw
dvb-usb-wt220u-02.fw                whiteheat_loader.fw
dvb-usb-wt220u-fc03.fw              yam
dvb-usb-wt220u-zl0353-01.fw         yamaha
e100                                zd1201-ap.fw
edgeport                            zd1201.fw
emi26                               zd1211
emi62

**blueboy9** · 04-23-2010

Sorry t bump an old posting but this is also the problem I'm having. My research and trial and errors lead me to believe this is solved by installing the drivers mentioned above, iwlagn and the firmware iwlwifi-1000-3.ucode.

Can anyone tell me the proper commands to install these? Thank you!

Thread Tools

Display

Posting Permissions