Find the answer to your Linux question:
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12
Alright here ya go Code: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-17-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Just Joined!
    Join Date
    Feb 2010
    Posts
    7

    Alright here ya go
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.31-17-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 (Ubuntu 2.6.31-17.54-generic)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
    [    0.000000]  BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    [    0.000000] DMI 2.3 present.
    [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] last_pfn = 0x1bef0 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-DAFFF uncachable
    [    0.000000]   DB000-DBFFF write-protect
    [    0.000000]   DC000-DFFFF write-back
    [    0.000000]   E0000-E3FFF uncachable
    [    0.000000]   E4000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FF0000000 write-back
    [    0.000000]   1 base 010000000 mask FF8000000 write-back
    [    0.000000]   2 base 018000000 mask FFC000000 write-back
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] Scanning 0 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
    [    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
    [    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  modified: 00000000000d0000 - 0000000000100000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 000000001bef0000 (usable)
    [    0.000000]  modified: 000000001bef0000 - 000000001beff000 (ACPI data)
    [    0.000000]  modified: 000000001beff000 - 000000001bf00000 (ACPI NVS)
    [    0.000000]  modified: 000000001bf00000 - 000000001c000000 (reserved)
    [    0.000000]  modified: 00000000fffc0000 - 0000000100000000 (reserved)
    [    0.000000] initial memory mapped : 0 - 00c00000
    [    0.000000] init_memory_mapping: 0000000000000000-000000001bef0000
    [    0.000000] Using x86 segment limits to approximate NX protection
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 001bc00000 page 2M
    [    0.000000]  001bc00000 - 001bef0000 page 4k
    [    0.000000] kernel direct mapping tables up to 1bef0000 @ 10000-15000
    [    0.000000] RAMDISK: 14829000 - 14f73a35
    [    0.000000] ACPI: RSDP 000f72b0 00014 (v00 PTLTD )
    [    0.000000] ACPI: RSDT 1bef8cca 00030 (v01 PTLTD    RSDT   06040000  LTP 00000000)
    [    0.000000] ACPI: FACP 1befee2b 00074 (v01 ATI    Raptor   06040000 ATI  000F4240)
    [    0.000000] ACPI: DSDT 1bef8cfa 06131 (v01    ATI U1_M1535 06040000 MSFT 0100000D)
    [    0.000000] ACPI: FACS 1befffc0 00040
    [    0.000000] ACPI: BOOT 1befee9f 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
    [    0.000000] ACPI: SSDT 1befeec7 00139 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 446MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 1bef0000
    [    0.000000]   low ram: 0 - 1bef0000
    [    0.000000]   node 0 low ram: 00000000 - 1bef0000
    [    0.000000]   node 0 bootmap 00011000 - 000147e0
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bef0000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
    [    0.000000]   #4 [0014829000 - 0014f73a35]          RAMDISK ==> [0014829000 - 0014f73a35]
    [    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
    [    0.000000]   #6 [00008a9000 - 00008ac234]              BRK ==> [00008a9000 - 00008ac234]
    [    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
    [    0.000000]   #8 [0000011000 - 0000015000]          BOOTMAP ==> [0000011000 - 0000015000]
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x0001bef0
    [    0.000000]   HighMem  0x0001bef0 -> 0x0001bef0
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[2] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x0001bef0
    [    0.000000] On node 0 totalpages: 114303
    [    0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c1000200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
    [    0.000000]   Normal zone: 862 pages used for memmap
    [    0.000000]   Normal zone: 109458 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x8008
    [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
    [    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
    [    0.000000] APIC: disable apic facility
    [    0.000000] nr_irqs_gsi: 16
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
    [    0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3fc0000)
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages at c1382000, static data 35612 bytes
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113409
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=c6c211fd-372b-4045-b256-9ffaa064252e ro quiet splash
    [    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 2288000 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 435312k/457664k available (4566k kernel code, 21632k reserved, 2142k data, 540k init, 0k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xdc6f0000 - 0xff7fe000   ( 561 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xdbef0000   ( 446 MB)
    [    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
    [    0.000000]       .data : 0xc0575a64 - 0xc078d408   (2142 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc0575a64   (4566 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] NR_IRQS:2304 nr_irqs:256
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 1855.191 MHz processor.
    [    0.001423] Console: colour VGA+ 80x25
    [    0.001430] console [tty0] enabled
    [    0.001507] Calibrating delay loop (skipped), value calculated using timer frequency.. 3710.38 BogoMIPS (lpj=7420764)
    [    0.001545] Security Framework initialized
    [    0.001596] AppArmor: AppArmor initialized
    [    0.001608] Mount-cache hash table entries: 512
    [    0.001844] Initializing cgroup subsys ns
    [    0.001851] Initializing cgroup subsys cpuacct
    [    0.001857] Initializing cgroup subsys memory
    [    0.001872] Initializing cgroup subsys freezer
    [    0.001875] Initializing cgroup subsys net_cls
    [    0.001897] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [    0.001902] CPU: L2 Cache: 512K (64 bytes/line)
    [    0.001908] mce: CPU supports 4 MCE banks
    [    0.001939] Performance Counters: AMD PMU driver.
    [    0.001945] ------------[ cut here ]------------
    [    0.001965] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40()
    [    0.001969] Hardware name: Presario 2100 (DM728A)   
    [    0.001972] Modules linked in:
    [    0.001978] Pid: 0, comm: swapper Not tainted 2.6.31-17-generic #54-Ubuntu
    [    0.001982] Call Trace:
    [    0.001999]  [<c01450fd>] warn_slowpath_common+0x6d/0xa0
    [    0.002005]  [<c011d763>] ? native_apic_write_dummy+0x33/0x40
    [    0.002009]  [<c011d763>] ? native_apic_write_dummy+0x33/0x40
    [    0.002014]  [<c0145145>] warn_slowpath_null+0x15/0x20
    [    0.002019]  [<c011d763>] native_apic_write_dummy+0x33/0x40
    [    0.002026]  [<c010dcfc>] perf_counters_lapic_init+0x2c/0x30
    [    0.002037]  [<c0795aff>] init_hw_perf_counters+0x159/0x21c
    [    0.002042]  [<c0795746>] identify_boot_cpu+0x21/0x23
    [    0.002046]  [<c07958c8>] check_bugs+0xb/0xe9
    [    0.002057]  [<c078e8c3>] start_kernel+0x2dc/0x2ec
    [    0.002061]  [<c078e406>] ? unknown_bootoption+0x0/0x1ab
    [    0.002066]  [<c078e07c>] i386_start_kernel+0x7c/0x83
    [    0.002081] ---[ end trace a7919e7f17c0a725 ]---
    [    0.002095] ... version:                 0
    [    0.002098] ... bit width:               48
    [    0.002100] ... generic counters:        4
    [    0.002102] ... value mask:              0000ffffffffffff
    [    0.002105] ... max period:              00007fffffffffff
    [    0.002107] ... fixed-purpose counters:  0
    [    0.002109] ... counter mask:            000000000000000f
    [    0.002117] Checking 'hlt' instruction... OK.
    [    0.016757] SMP alternatives: switching to UP code
    [    0.024043] Freeing SMP alternatives: 19k freed
    [    0.024083] ACPI: Core revision 20090521
    [    0.042087] ACPI: setting ELCR to 0200 (from 0e28)
    [    0.044168] weird, boot CPU (#0) not listed by the BIOS.
    [    0.044171] SMP motherboard not detected.
    [    0.044176] Local APIC not detected. Using dummy APIC emulation.
    [    0.044179] SMP disabled
    [    0.044627] Brought up 1 CPUs
    [    0.044632] Total of 1 processors activated (3710.38 BogoMIPS).
    [    0.044657] CPU0 attaching NULL sched-domain.
    [    0.045029] Booting paravirtualized kernel on bare hardware
    [    0.045300] regulator: core version 0.5
    [    0.045340] Time:  0:08:13  Date: 02/05/10
    [    0.045439] NET: Registered protocol family 16
    [    0.045653] EISA bus registered
    [    0.045683] ACPI: bus type pci registered
    [    0.058004] PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=2
    [    0.058007] PCI: Using configuration type 1 for base access
    [    0.059236] bio: create slab <bio-0> at 0
    [    0.060165] ACPI: EC: Look up EC in DSDT
    [    0.068836] ACPI: EC: non-query interrupt received, switching to interrupt mode
    [    0.076194] ACPI: Interpreter enabled
    [    0.076204] ACPI: (supports S0 S3 S4 S5)
    [    0.076230] ACPI: Using PIC for interrupt routing
    [    0.084463] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
    [    0.084467] ACPI: EC: driver started in interrupt mode
    [    0.084653] ACPI: No dock devices found.
    [    0.084950] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.085010] pci 0000:00:00.0: reg 10 32bit mmio: [0xd4000000-0xd7ffffff]
    [    0.085017] pci 0000:00:00.0: reg 14 32bit mmio: [0xd0500000-0xd0500fff]
    [    0.085024] pci 0000:00:00.0: reg 18 io port: [0x8090-0x8093]
    [    0.085102] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0006000-0xd0006fff]
    [    0.085135] pci 0000:00:02.0: PME# supported from D3cold
    [    0.085140] pci 0000:00:02.0: PME# disabled
    [    0.085171] pci 0000:00:06.0: reg 10 io port: [0x8400-0x84ff]
    [    0.085177] pci 0000:00:06.0: reg 14 32bit mmio: [0xd0007000-0xd0007fff]
    [    0.085206] pci 0000:00:06.0: supports D1 D2
    [    0.085209] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
    [    0.085214] pci 0000:00:06.0: PME# disabled
    [    0.085301] pci 0000:00:08.0: reg 10 32bit mmio: [0xd0008000-0xd0008fff]
    [    0.085308] pci 0000:00:08.0: reg 14 io port: [0x8800-0x88ff]
    [    0.085336] pci 0000:00:08.0: PME# supported from D3hot D3cold
    [    0.085340] pci 0000:00:08.0: PME# disabled
    [    0.085367] pci 0000:00:09.0: reg 10 32bit mmio: [0xd0004000-0xd0005fff]
    [    0.085398] pci 0000:00:09.0: supports D1 D2
    [    0.085401] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.085405] pci 0000:00:09.0: PME# disabled
    [    0.085434] pci 0000:00:0a.0: reg 10 32bit mmio: [0x80000000-0x80000fff]
    [    0.085449] pci 0000:00:0a.0: supports D1 D2
    [    0.085452] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.085456] pci 0000:00:0a.0: PME# disabled
    [    0.085486] pci 0000:00:0c.0: reg 10 32bit mmio: [0xd0009000-0xd00097ff]
    [    0.085493] pci 0000:00:0c.0: reg 14 32bit mmio: [0xd0000000-0xd0003fff]
    [    0.085524] pci 0000:00:0c.0: supports D1 D2
    [    0.085527] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
    [    0.085531] pci 0000:00:0c.0: PME# disabled
    [    0.085573] pci 0000:00:10.0: reg 20 io port: [0x8080-0x808f]
    [    0.085638] pci 0000:00:11.0: quirk: region 8000-803f claimed by ali7101 ACPI
    [    0.085643] pci 0000:00:11.0: quirk: region 8040-805f claimed by ali7101 SMB
    [    0.085672] pci 0000:00:12.0: reg 10 io port: [0x8c00-0x8cff]
    [    0.085679] pci 0000:00:12.0: reg 14 32bit mmio: [0xd000a000-0xd000afff]
    [    0.085698] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x00ffff]
    [    0.085712] pci 0000:00:12.0: supports D1 D2
    [    0.085715] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.085720] pci 0000:00:12.0: PME# disabled
    [    0.085773] pci 0000:01:05.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
    [    0.085779] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
    [    0.085786] pci 0000:01:05.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
    [    0.085800] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    [    0.085818] pci 0000:01:05.0: supports D1 D2
    [    0.085847] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
    [    0.085852] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
    [    0.085857] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
    [    0.085878] pci_bus 0000:00: on NUMA node 0
    [    0.085883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.085959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
    [    0.089166] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
    [    0.089331] ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
    [    0.089492] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *10)
    [    0.089652] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 10) *9
    [    0.089814] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10) *0, disabled.
    [    0.089975] ACPI: PCI Interrupt Link [LNKF] (IRQs 7 *11)
    [    0.090134] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10)
    [    0.090294] ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
    [    0.090453] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10) *9
    [    0.090726] SCSI subsystem initialized
    [    0.090847] libata version 3.00 loaded.
    [    0.090978] usbcore: registered new interface driver usbfs
    [    0.091003] usbcore: registered new interface driver hub
    [    0.091045] usbcore: registered new device driver usb
    [    0.091249] ACPI: WMI: Mapper loaded
    [    0.091252] PCI: Using ACPI for IRQ routing
    [    0.091430] Bluetooth: Core ver 2.15
    [    0.091476] NET: Registered protocol family 31
    [    0.091479] Bluetooth: HCI device and connection manager initialized
    [    0.091485] Bluetooth: HCI socket layer initialized
    [    0.091488] NetLabel: Initializing
    [    0.091490] NetLabel:  domain hash size = 128
    [    0.091493] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.091520] NetLabel:  unlabeled traffic allowed by default
    [    0.095078] pnp: PnP ACPI init
    [    0.095139] ACPI: bus type pnp registered
    [    0.096368] pnp 00:07: mem resource (0xe0500000-0xe0500fff) overlaps 0000:00:01.0 BAR 15 (0xe0000000-0xefffffff), disabling
    [    0.096402] pnp 00:07: io resource (0x8004-0x8005) overlaps 0000:00:11.0 BAR 13 (0x8000-0x803f), disabling
    [    0.096414] pnp 00:07: mem resource (0xe0500000-0xe0500fff) overlaps 0000:01:05.0 BAR 0 (0xe0000000-0xefffffff), disabling
    [    0.099891] pnp: PnP ACPI: found 11 devices
    [    0.099895] ACPI: ACPI bus type pnp unregistered
    [    0.099901] PnPBIOS: Disabled by ACPI PNP
    [    0.099925] system 00:07: ioport range 0x40b-0x40b has been reserved
    [    0.099930] system 00:07: ioport range 0x480-0x48f has been reserved
    [    0.099934] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    [    0.099938] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
    [    0.099942] system 00:07: ioport range 0x8000-0x807f could not be reserved
    [    0.099946] system 00:07: ioport range 0xff00-0xff01 has been reserved
    [    0.099950] system 00:07: ioport range 0xfe00-0xfefe has been reserved
    [    0.099956] system 00:07: iomem range 0xd0500000-0xd0500fff has been reserved
    [    0.134737] AppArmor: AppArmor Filesystem Enabled
    [    0.134775] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    [    0.134780] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
    [    0.134786] pci 0000:00:01.0:   MEM window: 0xd0100000-0xd01fffff
    [    0.134792] pci 0000:00:01.0:   PREFETCH window: 0xe0000000-0xefffffff
    [    0.134797] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
    [    0.134801] pci 0000:00:0a.0:   IO window: 0x001000-0x0010ff
    [    0.134806] pci 0000:00:0a.0:   IO window: 0x001400-0x0014ff
    [    0.134811] pci 0000:00:0a.0:   PREFETCH window: 0x1c000000-0x1fffffff
    [    0.134816] pci 0000:00:0a.0:   MEM window: 0x20000000-0x23ffffff
    [    0.135064] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
    [    0.135068] PCI: setting IRQ 11 as level-triggered
    [    0.135074] pci 0000:00:0a.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
    [    0.135084] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.135088] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [    0.135092] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
    [    0.135096] pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
    [    0.135099] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
    [    0.135104] pci_bus 0000:02: resource 0 io:  [0x1000-0x10ff]
    [    0.135107] pci_bus 0000:02: resource 1 io:  [0x1400-0x14ff]
    [    0.135111] pci_bus 0000:02: resource 2 pref mem [0x1c000000-0x1fffffff]
    [    0.135114] pci_bus 0000:02: resource 3 mem: [0x20000000-0x23ffffff]
    [    0.135172] NET: Registered protocol family 2
    [    0.135311] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.135719] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.136115] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.136464] TCP: Hash tables configured (established 16384 bind 16384)
    [    0.136468] TCP reno registered
    [    0.136585] NET: Registered protocol family 1
    [    0.136690] Trying to unpack rootfs image as initramfs...
    [    0.406390] Freeing initrd memory: 7466k freed
    [    0.423414] Simple Boot Flag at 0x36 set to 0x1
    [    0.423616] cpufreq-nforce2: No nForce2 chipset.
    [    0.423661] Scanning for low memory corruption every 60 seconds
    [    0.423854] audit: initializing netlink socket (disabled)
    [    0.423886] type=2000 audit(1265328493.420:1): initialized
    [    0.433991] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.435915] VFS: Disk quotas dquot_6.5.2
    [    0.435990] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.436747] fuse init (API version 7.12)
    [    0.436844] msgmni has been set to 865
    [    0.437179] alg: No test for stdrng (krng)
    [    0.437200] io scheduler noop registered
    [    0.437203] io scheduler anticipatory registered
    [    0.437206] io scheduler deadline registered
    [    0.437258] io scheduler cfq registered (default)
    [    0.437275] pci 0000:00:00.0: ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb
    [    0.652049] pci 0000:00:07.0: Activating ISA DMA hang workarounds
    [    0.652076] pci 0000:01:05.0: Boot video device
    [    0.652198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.652230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.652685] ACPI: AC Adapter [ACAD] (on-line)
    [    0.652772] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    [    0.652780] ACPI: Power Button [PWRF]
    [    0.652850] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [    0.652854] ACPI: Power Button [PWRB]
    [    0.652913] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [    0.657022] ACPI: Lid Switch [LID]
    [    0.657190] Marking TSC unstable due to TSC halts in idle
    [    0.657213] ACPI: CPU0 (power states: C1[C1] C2[C2])
    [    0.657248] processor LNXCPU:00: registered as cooling_device0
    [    0.660148] Switched to high resolution mode on CPU 0
    [    0.661409] thermal LNXTHERM:01: registered as thermal_zone0
    [    0.661419] ACPI: Thermal Zone [THRM] (31 C)
    [    0.661485] isapnp: Scanning for PnP cards...
    [    0.710769] ACPI: Battery Slot [BAT1] (battery absent)
    [    0.928664] isapnp: No Plug & Play device found
    [    0.930191] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.930353] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    0.930749] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    0.931072] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
    [    0.931077] PCI: setting IRQ 3 as level-triggered
    [    0.931083] serial 0000:00:08.0: PCI INT A -> Link[LNKG] -> GSI 3 (level, low) -> IRQ 3
    [    0.931091] serial 0000:00:08.0: PCI INT A disabled
    [    0.932439] brd: module loaded
    [    0.933047] loop: module loaded
    [    0.933161] input: Macintosh mouse button emulation as /devices/virtual/input/input3
    [    0.933478] pata_ali 0000:00:10.0: can't derive routing for PCI INT A
    [    0.933741] scsi0 : pata_ali
    [    0.933918] scsi1 : pata_ali
    [    0.934187] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14
    [    0.934191] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
    [    0.935077] Fixed MDIO Bus: probed
    [    0.935128] PPP generic driver version 2.4.2
    [    0.935268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.935301] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.935575] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
    [    0.935579] PCI: setting IRQ 10 as level-triggered
    [    0.935585] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
    [    0.935618] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [    0.935703] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    [    0.935737] ohci_hcd 0000:00:02.0: irq 10, io mem 0xd0006000
    [    0.990156] usb usb1: configuration #1 chosen from 1 choice
    [    0.990200] hub 1-0:1.0: USB hub found
    [    0.990223] hub 1-0:1.0: 4 ports detected
    [    0.990316] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.990435] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    [    0.993681] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.993690] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.993776] mice: PS/2 mouse device common for all mice
    [    0.993984] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [    0.994013] rtc0: alarms up to one month, y3k, 242 bytes nvram
    [    0.994127] device-mapper: uevent: version 1.0.3
    [    0.994240] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    0.994373] device-mapper: multipath: version 1.1.0 loaded
    [    0.994378] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    0.994547] EISA: Probing bus 0 at eisa.0
    [    0.994558] Cannot allocate resource for EISA slot 1
    [    0.994586] Cannot allocate resource for EISA slot 8
    [    0.994589] EISA: Detected 0 cards.
    [    0.994713] cpuidle: using governor ladder
    [    0.994768] cpuidle: using governor menu
    [    0.995424] TCP cubic registered
    [    0.995623] NET: Registered protocol family 10
    [    0.996247] lo: Disabled Privacy Extensions
    [    0.996660] NET: Registered protocol family 17
    [    0.996686] Bluetooth: L2CAP ver 2.13
    [    0.996689] Bluetooth: L2CAP socket layer initialized
    [    0.996693] Bluetooth: SCO (Voice Link) ver 0.6
    [    0.996695] Bluetooth: SCO socket layer initialized
    [    0.996747] Bluetooth: RFCOMM TTY layer initialized
    [    0.996751] Bluetooth: RFCOMM socket layer initialized
    [    0.996754] Bluetooth: RFCOMM ver 1.11
    [    0.996783] powernow-k8: Processor cpuid 6a0 not supported
    [    0.996878] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
    [    1.003193] powernow: No PST tables match this cpuid (0x7a0)
    [    1.003196] powernow: This is indicative of a broken BIOS.
    [    1.003198] powernow: Trying ACPI perflib
    [    1.003260] powernow: Minimum speed 530 MHz. Maximum speed 1855 MHz.
    [    1.003326] Using IPI No-Shortcut mode
    [    1.003441] PM: Resume from disk failed.
    [    1.003465] registered taskstats version 1
    [    1.003618]   Magic number: 14:409:101
    [    1.003826] rtc_cmos 00:02: setting system clock to 2010-02-05 00:08:16 UTC (1265328496)
    [    1.003831] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.003834] EDD information not available.
    [    1.027152] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [    1.256436] ata1.00: ATA-6: ST94011A, 3.04, max UDMA/100
    [    1.256440] ata1.00: 78140160 sectors, multi 16: LBA48 
    [    1.272326] ata1.00: configured for UDMA/100
    [    1.272559] scsi 0:0:0:0: Direct-Access     ATA      ST94011A         3.04 PQ: 0 ANSI: 5
    [    1.272730] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.272796] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
    [    1.272868] sd 0:0:0:0: [sda] Write Protect is off
    [    1.272872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.272907] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.273105]  sda: sda1 sda2 < sda5 >
    [    1.327028] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.436352] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R2312, 1905, max MWDMA2
    [    1.436377] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues.  It can be enabled
    [    1.436381] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
    [    1.452279] ata2.00: configured for MWDMA2
    [    1.458345] scsi 1:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-R2312 1905 PQ: 0 ANSI: 5
    [    1.466099] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    [    1.466104] Uniform CD-ROM driver Revision: 3.20
    [    1.466201] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.466263] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [    1.466303] Freeing unused kernel memory: 540k freed
    [    1.467377] Write protecting the kernel text: 4568k
    [    1.467416] Write protecting the kernel read-only data: 1836k
    [    1.719952] Linux agpgart interface v0.103
    [    1.722740] agpgart-ati 0000:00:00.0: Ati IGP320/M chipset
    [    1.731248] natsemi dp8381x driver, version 2.1, Sept 11, 2006
    [    1.731252]   originally by Donald Becker <becker@scyld.com>
    [    1.731253]   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
    [    1.795952] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xd4000000
    [    1.796497] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    [    1.796505] natsemi 0000:00:12.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    [    1.798976] natsemi eth0: NatSemi DP8381[56] at 0xd000a000 (0000:00:12.0), 00:0d:9d:82:06:bc, IRQ 11, port TP.
    [    1.806817] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    [    1.806828] ohci1394 0000:00:0c.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
    [    1.909646] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[d0009000-d00097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    [    1.910414] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    [    1.910422] b43-pci-bridge 0000:00:09.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    [    1.913878] ssb: Sonics Silicon Backplane found on PCI device 0000:00:09.0
    [    1.918870] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input5
    [    1.918956] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    [    2.000268] [drm] Initialized drm 1.1.0 20060810
    [    2.030756] [drm] radeon default to kernel modesetting DISABLED.
    [    2.030865] pci 0000:01:05.0: power state changed by ACPI to D0
    [    2.030886] pci 0000:01:05.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
    [    2.031538] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
    [    2.056913] FDC 0 is a post-1991 82077
    [    3.200245] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000d9d719e81e0eb]
    [    3.913969] PM: Starting manual resume from disk
    [    3.913977] PM: Resume from partition 8:5
    [    3.913980] PM: Checking hibernation image.
    [    3.914281] PM: Resume from disk failed.
    [    3.947024] EXT4-fs (sda1): barriers enabled
    [    3.974405] kjournald2 starting: pid 337, dev sda1:8, commit interval 5 seconds
    [    3.974428] EXT4-fs (sda1): delayed allocation enabled
    [    3.974433] EXT4-fs: file extents enabled
    [    3.980506] EXT4-fs: mballoc enabled
    [    3.980531] EXT4-fs (sda1): mounted filesystem with ordered data mode
    [    4.913902] type=1505 audit(1265328500.408:2): operation="profile_load" pid=360 name=/usr/share/gdm/guest-session/Xsession
    [    4.918972] type=1505 audit(1265328500.412:3): operation="profile_load" pid=361 name=/sbin/dhclient3
    [    4.919356] type=1505 audit(1265328500.412:4): operation="profile_load" pid=361 name=/usr/lib/NetworkManager/nm-dhcp-client.action
    [    4.919571] type=1505 audit(1265328500.412:5): operation="profile_load" pid=361 name=/usr/lib/connman/scripts/dhclient-script
    [    5.005977] type=1505 audit(1265328500.500:6): operation="profile_load" pid=362 name=/usr/bin/evince
    [    5.013848] type=1505 audit(1265328500.508:7): operation="profile_load" pid=362 name=/usr/bin/evince-previewer
    [    5.018445] type=1505 audit(1265328500.512:8): operation="profile_load" pid=362 name=/usr/bin/evince-thumbnailer
    [    5.042609] type=1505 audit(1265328500.536:9): operation="profile_load" pid=364 name=/usr/lib/cups/backend/cups-pdf
    [   17.935011] udev: starting version 147
    [   17.937092] Adding 1301224k swap on /dev/sda5.  Priority:-1 extents:1 across:1301224k 
    [   18.103124] yenta_cardbus 0000:00:0a.0: CardBus bridge found [103c:0024]
    [   18.103151] yenta_cardbus 0000:00:0a.0: O2: res at 0x94/0xD4: 00/ea
    [   18.103154] yenta_cardbus 0000:00:0a.0: O2: enabling read prefetch/write burst
    [   18.237889] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x00b8, PCI irq 11
    [   18.237897] yenta_cardbus 0000:00:0a.0: Socket status: 30000007
    [   18.372716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   18.396668] EXT4-fs (sda1): internal journal on sda1:8
    [   18.491092] parport_pc 00:09: reported by Plug and Play ACPI
    [   18.491168] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [   18.624454] lp0: using parport0 (interrupt-driven).
    [   18.750142] cfg80211: Calling CRDA to update world regulatory domain
    [   18.811800] cfg80211: World regulatory domain updated:
    [   18.811810] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   18.811815] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   18.811819] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   18.811823] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   18.811827] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   18.811830] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   18.817011] ppdev: user-space parallel port driver
    [   18.841459] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   18.869666] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
    [   18.939228] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
    [   18.939237] PCI: setting IRQ 5 as level-triggered
    [   18.939244] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5
    [   19.151838] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
    [   19.154098] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
    [   19.154962] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    [   19.155769] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    [   19.162251] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    [   19.247950] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
    [   19.296661] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
    [   19.400151] eth0: DSPCFG accepted after 0 usec.
    [   19.400162] eth0: link up.
    [   19.400178] eth0: Setting full-duplex based on negotiated link capability.
    [   19.624866] __ratelimit: 6 callbacks suppressed
    [   19.624872] type=1505 audit(1265328515.120:12): operation="profile_replace" pid=826 name=/usr/share/gdm/guest-session/Xsession
    [   19.639199] type=1505 audit(1265328515.132:13): operation="profile_replace" pid=832 name=/sbin/dhclient3
    [   19.639583] type=1505 audit(1265328515.132:14): operation="profile_replace" pid=832 name=/usr/lib/NetworkManager/nm-dhcp-client.action
    [   19.639805] type=1505 audit(1265328515.132:15): operation="profile_replace" pid=832 name=/usr/lib/connman/scripts/dhclient-script
    [   19.669857] type=1505 audit(1265328515.164:16): operation="profile_replace" pid=836 name=/usr/bin/evince
    [   19.681678] type=1505 audit(1265328515.176:17): operation="profile_replace" pid=836 name=/usr/bin/evince-previewer
    [   19.686620] type=1505 audit(1265328515.180:18): operation="profile_replace" pid=836 name=/usr/bin/evince-thumbnailer
    [   19.703774] type=1505 audit(1265328515.196:19): operation="profile_replace" pid=846 name=/usr/lib/cups/backend/cups-pdf
    [   19.711483] type=1505 audit(1265328515.204:20): operation="profile_replace" pid=846 name=/usr/sbin/cupsd
    [   19.714832] type=1505 audit(1265328515.208:21): operation="profile_replace" pid=848 name=/usr/sbin/tcpdump
    [   22.088042] AC'97 1 does not respond - RESET
    [   22.104038] AC'97 1 access is not valid [0xffffffff], removing mixer.
    [   22.104095] ali mixer 1 creating error.
    [   22.723034] agpgart-ati 0000:00:00.0: AGP 2.0 bridge
    [   22.723065] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x mode
    [   22.723111] pci 0000:01:05.0: putting AGP V2 device into 4x mode
    [   22.856971] [drm] Setting GART location based on new memory map
    [   22.856988] [drm] Loading R100 Microcode
    [   22.857037] [drm] writeback test succeeded in 1 usecs
    [   27.911171] glxinfo:1488 freeing invalid memtype d4102000-d4112000
    [   27.911185] glxinfo:1488 freeing invalid memtype d4112000-d4122000
    [   27.911194] glxinfo:1488 freeing invalid memtype d4122000-d4132000
    [   27.911202] glxinfo:1488 freeing invalid memtype d4132000-d4142000
    [   27.911209] glxinfo:1488 freeing invalid memtype d4142000-d4152000
    [   27.911217] glxinfo:1488 freeing invalid memtype d4152000-d4162000
    [   27.911225] glxinfo:1488 freeing invalid memtype d4162000-d4172000
    [   27.911232] glxinfo:1488 freeing invalid memtype d4172000-d4182000
    [   27.911240] glxinfo:1488 freeing invalid memtype d4182000-d4192000
    [   27.911247] glxinfo:1488 freeing invalid memtype d4192000-d41a2000
    [   27.911255] glxinfo:1488 freeing invalid memtype d41a2000-d41b2000
    [   27.911263] glxinfo:1488 freeing invalid memtype d41b2000-d41c2000
    [   27.911270] glxinfo:1488 freeing invalid memtype d41c2000-d41d2000
    [   27.911278] glxinfo:1488 freeing invalid memtype d41d2000-d41e2000
    [   27.911286] glxinfo:1488 freeing invalid memtype d41e2000-d41f2000
    [   27.911293] glxinfo:1488 freeing invalid memtype d41f2000-d4202000
    [   27.911301] glxinfo:1488 freeing invalid memtype d4202000-d4212000
    [   27.911308] glxinfo:1488 freeing invalid memtype d4212000-d4222000
    [   27.911316] glxinfo:1488 freeing invalid memtype d4222000-d4232000
    [   27.911324] glxinfo:1488 freeing invalid memtype d4232000-d4242000
    [   27.911331] glxinfo:1488 freeing invalid memtype d4242000-d4252000
    [   27.911339] glxinfo:1488 freeing invalid memtype d4252000-d4262000
    [   27.911346] glxinfo:1488 freeing invalid memtype d4262000-d4272000
    [   27.911354] glxinfo:1488 freeing invalid memtype d4272000-d4282000
    [   27.911362] glxinfo:1488 freeing invalid memtype d4282000-d4292000
    [   27.911369] glxinfo:1488 freeing invalid memtype d4292000-d42a2000
    [   27.911377] glxinfo:1488 freeing invalid memtype d42a2000-d42b2000
    [   27.911385] glxinfo:1488 freeing invalid memtype d42b2000-d42c2000
    [   27.911392] glxinfo:1488 freeing invalid memtype d42c2000-d42d2000
    [   27.911400] glxinfo:1488 freeing invalid memtype d42d2000-d42e2000
    [   27.911408] glxinfo:1488 freeing invalid memtype d42e2000-d42f2000
    [   27.911415] glxinfo:1488 freeing invalid memtype d42f2000-d4302000
    [   29.848068] eth0: no IPv6 routers present
    [   81.632063] Clocksource tsc unstable (delta = -357074998 ns)
    [  321.681738] b43legacy-phy0: Broadcom 4306 WLAN found
    [  321.704049] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1
    [  321.704078] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
    [  321.730555] b43legacy-phy0 debug: Radio initialized
    [  321.893388] phy0: Selected rate control algorithm 'minstrel'
    [  321.894918] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
    [  322.159179] b43legacy-phy1: Broadcom 4306 WLAN found
    [  322.186548] b43legacy-phy1 debug: Found PHY: Analog 1, Type 2, Revision 1
    [  322.186580] b43legacy-phy1 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
    [  322.217480] b43legacy-phy1 debug: Radio initialized
    [  322.218837] phy1: Selected rate control algorithm 'minstrel'
    [  322.761505] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw
    [  322.948494] b43legacy ssb0:0: firmware: requesting b43legacy/pcm4.fw
    [  322.966962] b43legacy ssb0:0: firmware: requesting b43legacy/b0g0initvals2.fw
    [  323.122772] b43legacy-phy1: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
    [  323.194816] b43legacy-phy1 debug: Chip initialized
    [  323.195392] b43legacy-phy1 debug: 30-bit DMA initialized
    [  323.195641] Registered led device: b43legacy-phy1::radio
    [  323.195683] b43legacy-phy1 debug: Wireless interface started
    [  323.195698] b43legacy-phy1 debug: Adding Interface type 2
    [  323.195894] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [  350.745753] b43legacy-phy1 debug: Removing Interface type 2
    [  350.745966] b43legacy-phy1 debug: Wireless interface stopped
    [  350.746167] b43legacy-phy1 debug: DMA-30 0x0260 (RX) max used slots: 1/64
    [  350.746249] b43legacy-phy1 debug: DMA-30 0x0200 (RX) max used slots: 1/64
    [  350.746328] b43legacy-phy1 debug: DMA-30 0x02A0 (TX) max used slots: 0/128
    [  350.752300] b43legacy-phy1 debug: DMA-30 0x0280 (TX) max used slots: 0/128
    [  350.760063] b43legacy-phy1 debug: DMA-30 0x0260 (TX) max used slots: 0/128
    [  350.772281] b43legacy-phy1 debug: DMA-30 0x0240 (TX) max used slots: 0/128
    [  350.781515] b43legacy-phy1 debug: DMA-30 0x0220 (TX) max used slots: 14/128
    [  350.788072] b43legacy-phy1 debug: DMA-30 0x0200 (TX) max used slots: 0/128
    [  350.796045] b43legacy-phy1 debug: Radio initialized
    [  350.796058] b43legacy-phy1 debug: Radio initialized
    [  351.052915] b43legacy-phy2: Broadcom 4306 WLAN found
    [  351.084071] b43legacy-phy2 debug: Found PHY: Analog 1, Type 2, Revision 1
    [  351.084109] b43legacy-phy2 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
    [  351.112120] b43legacy-phy2 debug: Radio initialized
    [  351.114041] phy2: Selected rate control algorithm 'minstrel'
    [  351.596058] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw
    [  351.611272] b43legacy ssb0:0: firmware: requesting b43legacy/pcm4.fw
    [  351.622862] b43legacy ssb0:0: firmware: requesting b43legacy/b0g0initvals2.fw
    [  351.744169] b43legacy-phy2: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
    [  351.808556] b43legacy-phy2 debug: Chip initialized
    [  351.809064] b43legacy-phy2 debug: 30-bit DMA initialized
    [  351.809319] Registered led device: b43legacy-phy2::radio
    [  351.809360] b43legacy-phy2 debug: Wireless interface started
    [  351.809374] b43legacy-phy2 debug: Adding Interface type 2
    [  351.824364] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [  489.438472] b43legacy-phy2 debug: Removing Interface type 2
    [  489.438693] b43legacy-phy2 debug: Wireless interface stopped
    [  489.438896] b43legacy-phy2 debug: DMA-30 0x0260 (RX) max used slots: 1/64
    [  489.438981] b43legacy-phy2 debug: DMA-30 0x0200 (RX) max used slots: 1/64
    [  489.439067] b43legacy-phy2 debug: DMA-30 0x02A0 (TX) max used slots: 0/128
    [  489.444312] b43legacy-phy2 debug: DMA-30 0x0280 (TX) max used slots: 0/128
    [  489.456155] b43legacy-phy2 debug: DMA-30 0x0260 (TX) max used slots: 0/128
    [  489.472950] b43legacy-phy2 debug: DMA-30 0x0240 (TX) max used slots: 0/128
    [  489.486029] b43legacy-phy2 debug: DMA-30 0x0220 (TX) max used slots: 14/128
    [  489.495043] b43legacy-phy2 debug: DMA-30 0x0200 (TX) max used slots: 0/128
    [  489.505389] b43legacy-phy2 debug: Radio initialized
    [  489.505410] b43legacy-phy2 debug: Radio initialized
    [  489.761019] b43legacy-phy3: Broadcom 4306 WLAN found
    [  489.784106] b43legacy-phy3 debug: Found PHY: Analog 1, Type 2, Revision 1
    [  489.784136] b43legacy-phy3 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
    [  489.809188] b43legacy-phy3 debug: Radio initialized
    [  489.810228] phy3: Selected rate control algorithm 'minstrel'
    [  490.342905] b43legacy ssb0:0: firmware: requesting b43legacy/ucode4.fw
    [  490.351956] b43legacy ssb0:0: firmware: requesting b43legacy/pcm4.fw
    [  490.383344] b43legacy ssb0:0: firmware: requesting b43legacy/b0g0initvals2.fw
    [  490.609507] b43legacy-phy3: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
    [  490.684748] b43legacy-phy3 debug: Chip initialized
    [  490.685287] b43legacy-phy3 debug: 30-bit DMA initialized
    [  490.685543] Registered led device: b43legacy-phy3::radio
    [  490.685584] b43legacy-phy3 debug: Wireless interface started
    [  490.685599] b43legacy-phy3 debug: Adding Interface type 2
    [  490.685802] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 1061.006610] b43legacy-phy3 warning: Unexpected value for chanstat (0x7C00)

  2. #12
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    It's back to loading the b43legacy driver, and it is giving an error about it. The ony thing that I can recommend, is what reed9 already recommended. Blacklist the b43legacy driver and load the b43 driver.

    The b43 driver uses different firmware, so that would need to be installed. You may want to do it manually this time.

    b43 - Linux Wireless
    Please do not send Private Messages to me with requests for help. I will not reply.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •