Find the answer to your Linux question:
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 26
___________________________________ ( You will gain money by an immoral ) ( action. ) ----------------------------------- o ,__, o (oo)____ (__) )\ ||--|| * paulnrhodes@paulnrhodes-laptop ~ $ sudo uname -r 2.6.31-14-generic paulnrhodes@paulnrhodes-laptop ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Just Joined!
    Join Date
    Feb 2010
    Location
    East Kent
    Posts
    22

    uname -r


    ___________________________________
    ( You will gain money by an immoral )
    ( action. )
    -----------------------------------
    o ,__,
    o (oo)____
    (__) )\
    ||--|| *
    paulnrhodes@paulnrhodes-laptop ~ $ sudo uname -r
    2.6.31-14-generic
    paulnrhodes@paulnrhodes-laptop ~ $

  2. #12
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    rt73usb 26336 0
    rt2500usb 21152 0
    rt2x00usb 11548 2 rt73usb,rt2500usb
    rt2x00lib 29756 3 rt73usb,rt2500usb,rt2x00usb
    You have two conflicting drivers loading for the card. I'm pretty sure what you want is the rt73usb and not the rt2500usb, so lets remove the latter and blacklist it.

    Code:
    sudo ifconfig wlan0 down
    sudo modprobe -r rt73usb
    sudo modprobe -r rt2500usb
    sudo modprobe rt73usb
    sudo ifconfig wlan0 up
    echo "blacklist rt2500usb" | sudo tee -a /etc/modprobe.d/modprobe.conf
    Post the output of
    Code:
    iwconfig
    dmesg | tail
    And does this return any local networks
    Code:
    sudo iwlist wlan0 scan

  3. #13
    Just Joined!
    Join Date
    Feb 2010
    Location
    East Kent
    Posts
    22
    That concludes all the commands I am able to run in terminal

  4. $spacer_open
    $spacer_close
  5. #14
    Just Joined!
    Join Date
    Feb 2010
    Location
    East Kent
    Posts
    22
    Quote Originally Posted by reed9 View Post
    You have two conflicting drivers loading for the card. I'm pretty sure what you want is the rt73usb and not the rt2500usb, so lets remove the latter and blacklist it.

    Code:
    sudo ifconfig wlan0 down
    sudo modprobe -r rt73usb
    sudo modprobe -r rt2500usb
    sudo modprobe rt73usb
    sudo ifconfig wlan0 up
    echo "blacklist rt2500usb" | sudo tee -a /etc/modprobe.d/modprobe.conf
    Post the output of
    Code:
    iwconfig
    dmesg | tail
    And does this return any local networks
    Code:
    sudo iwlist wlan0 scan
    _______________________________________
    / Try to have as good a life as you can \
    \ under the circumstances. /
    ---------------------------------------
    \
    \
    ___
    {~._.~}
    ( Y )
    ()~*~()
    (_)-(_)
    paulnrhodes@paulnrhodes-laptop ~ $ sudo dmesg | tail
    [18669.433676] usb 2-1: configuration #1 chosen from 1 choice
    [18669.552435] phy2 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
    [18669.552454] phy2 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
    [18669.818292] phy3: Selected rate control algorithm 'minstrel'
    [18669.821055] Registered led device: rt73usb-phy3::radio
    [18669.821117] Registered led device: rt73usb-phy3::assoc
    [18669.821177] Registered led device: rt73usb-phy3::quality
    [18670.217024] udev: renamed network interface wlan0 to wlan1
    [18670.241220] rt73usb 2-1:1.0: firmware: requesting rt73.bin
    [18670.597652] ADDRCONF(NETDEV_UP): wlan1: link is not ready
    paulnrhodes@paulnrhodes-laptop ~ $

  6. #15
    Just Joined!
    Join Date
    Feb 2010
    Location
    East Kent
    Posts
    22
    Quote Originally Posted by paulnrhodes View Post
    _______________________________________
    / Try to have as good a life as you can \
    \ under the circumstances. /
    ---------------------------------------
    \
    \
    ___
    {~._.~}
    ( Y )
    ()~*~()
    (_)-(_)
    paulnrhodes@paulnrhodes-laptop ~ $ sudo dmesg | tail
    [18669.433676] usb 2-1: configuration #1 chosen from 1 choice
    [18669.552435] phy2 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
    [18669.552454] phy2 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
    [18669.818292] phy3: Selected rate control algorithm 'minstrel'
    [18669.821055] Registered led device: rt73usb-phy3::radio
    [18669.821117] Registered led device: rt73usb-phy3::assoc
    [18669.821177] Registered led device: rt73usb-phy3::quality
    [18670.217024] udev: renamed network interface wlan0 to wlan1
    [18670.241220] rt73usb 2-1:1.0: firmware: requesting rt73.bin
    [18670.597652] ADDRCONF(NETDEV_UP): wlan1: link is not ready
    paulnrhodes@paulnrhodes-laptop ~ $
    _______________________________________
    ( You can rent this space for only $5 a )
    ( week. )
    ---------------------------------------
    o
    o
    .--.
    |o_o |
    |:_/ |
    // \ \
    (| | )
    /'\_ _/`\
    \___)=(___/

    paulnrhodes@paulnrhodes-laptop ~ $ sudo iwconfig
    lo no wireless extensions.

    eth0 no wireless extensions.

    irda0 no wireless extensions.

    wmaster0 no wireless extensions.

    wlan1 IEEE 802.11bg ESSID:""
    Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
    Tx-Power=19 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:on
    Link Quality:0 Signal level:0 Noise level:0
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0

    paulnrhodes@paulnrhodes-laptop ~ $

  7. #16
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    Change wlan0 to wlan1 in my above.

  8. #17
    Just Joined!
    Join Date
    Feb 2010
    Location
    East Kent
    Posts
    22
    Quote Originally Posted by reed9 View Post
    You have two conflicting drivers loading for the card. I'm pretty sure what you want is the rt73usb and not the rt2500usb, so lets remove the latter and blacklist it.

    Code:
    sudo ifconfig wlan0 down
    sudo modprobe -r rt73usb
    sudo modprobe -r rt2500usb
    sudo modprobe rt73usb
    sudo ifconfig wlan0 up
    echo "blacklist rt2500usb" | sudo tee -a /etc/modprobe.d/modprobe.conf
    Post the output of
    Code:
    iwconfig
    dmesg | tail
    And does this return any local networks
    Code:
    sudo iwlist wlan0 scan
    ______________________________________
    / Hope that the day after you die is a \
    \ nice day. /
    --------------------------------------
    \
    \
    ___
    {~._.~}
    ( Y )
    ()~*~()
    (_)-(_)
    paulnrhodes@paulnrhodes-laptop ~ $ sudo iwlist wlan0 scan
    wlan0 Interface doesn't support scanning.

    paulnrhodes@paulnrhodes-laptop ~ $

  9. #18
    Just Joined!
    Join Date
    Feb 2010
    Location
    East Kent
    Posts
    22
    Quote Originally Posted by reed9 View Post
    Change wlan0 to wlan1 in my above.
    wlan1 Inteface doesn't support scanning.

  10. #19
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    Can you reboot, check iwconfig and see if the interface is stilled named wlan1 or changed to wlan0 (just to check), and try
    Code:
    sudo ifconfig wlan0
    sudo iwlist wlan0 scan
    again. (Change to wlan1 if needed.)
    And then post the whole of
    Code:
    dmesg
    It'll be long so use [code] tags.

  11. #20
    Just Joined!
    Join Date
    Feb 2010
    Location
    East Kent
    Posts
    22

    as advised

    Code:
    [    0.004538] ... value mask:              00000000ffffffff
    [    0.004543] ... max period:              000000007fffffff
    [    0.004548] ... fixed-purpose counters:  0
    [    0.004552] ... counter mask:            0000000000000003
    [    0.004560] Checking 'hlt' instruction... OK.
    [    0.021082] SMP alternatives: switching to UP code
    [    0.028035] Freeing SMP alternatives: 19k freed
    [    0.028056] ACPI: Core revision 20090521
    [    0.053978] ACPI: setting ELCR to 0200 (from 0800)
    [    0.056159] weird, boot CPU (#0) not listed by the BIOS.
    [    0.056164] SMP motherboard not detected.
    [    0.056170] Local APIC not detected. Using dummy APIC emulation.
    [    0.056174] SMP disabled
    [    0.056477] Brought up 1 CPUs
    [    0.056486] Total of 1 processors activated (2264.93 BogoMIPS).
    [    0.056520] CPU0 attaching NULL sched-domain.
    [    0.060022] Booting paravirtualized kernel on bare hardware
    [    0.060555] regulator: core version 0.5
    [    0.060590] Time: 10:30:19  Date: 02/18/10
    [    0.060721] NET: Registered protocol family 16
    [    0.061030] EISA bus registered
    [    0.061067] ACPI: bus type pci registered
    [    0.061556] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
    [    0.061562] PCI: Using configuration type 1 for base access
    [    0.063828] bio: create slab <bio-0> at 0
    [    0.065787] ACPI: EC: EC description table is found, configuring boot EC
    [    0.077115] ACPI: EC: non-query interrupt received, switching to interrupt mode
    [    0.092795] ACPI: Interpreter enabled
    [    0.092805] ACPI: (supports S0 S3 S4 S5)
    [    0.092853] ACPI: Using PIC for interrupt routing
    [    0.109118] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [    0.109125] ACPI: EC: driver started in interrupt mode
    [    0.109203] ACPI: Power Resource [PUBS] (on)
    [    0.113978] ACPI: ACPI Dock Station Driver: 3 docks/bays found
    [    0.114032] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.114112] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
    [    0.114238] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
    [    0.114296] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
    [    0.114353] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
    [    0.114464] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    [    0.114473] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
    [    0.114504] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
    [    0.114515] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
    [    0.114525] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
    [    0.114535] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
    [    0.114545] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
    [    0.114556] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
    [    0.114611] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
    [    0.114654] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
    [    0.114665] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
    [    0.114734] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0100000-0xc017ffff]
    [    0.114744] pci 0000:01:00.0: reg 14 32bit mmio: [0xe8000000-0xebffffff]
    [    0.114753] pci 0000:01:00.0: reg 18 32bit mmio: [0xe4000000-0xe7ffffff]
    [    0.114763] pci 0000:01:00.0: reg 1c 32bit mmio: [0xe0000000-0xe1ffffff]
    [    0.114777] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
    [    0.114797] pci 0000:01:00.0: supports D1 D2
    [    0.114835] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
    [    0.114843] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xebffffff]
    [    0.114885] pci 0000:02:00.0: reg 10 32bit mmio: [0x50000000-0x50000fff]
    [    0.114906] pci 0000:02:00.0: supports D1 D2
    [    0.114912] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.114920] pci 0000:02:00.0: PME# disabled
    [    0.114957] pci 0000:02:00.1: reg 10 32bit mmio: [0x51000000-0x51000fff]
    [    0.114979] pci 0000:02:00.1: supports D1 D2
    [    0.114984] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.114992] pci 0000:02:00.1: PME# disabled
    [    0.115035] pci 0000:02:02.0: reg 10 32bit mmio: [0xc0201000-0xc02010ff]
    [    0.115046] pci 0000:02:02.0: reg 14 io port: [0x6440-0x6447]
    [    0.115056] pci 0000:02:02.0: reg 18 io port: [0x6000-0x60ff]
    [    0.115092] pci 0000:02:02.0: supports D2
    [    0.115097] pci 0000:02:02.0: PME# supported from D2 D3hot D3cold
    [    0.115104] pci 0000:02:02.0: PME# disabled
    [    0.115147] pci 0000:02:08.0: reg 10 32bit mmio: [0xc0200000-0xc0200fff]
    [    0.115158] pci 0000:02:08.0: reg 14 io port: [0x6400-0x643f]
    [    0.115195] pci 0000:02:08.0: supports D1 D2
    [    0.115201] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.115208] pci 0000:02:08.0: PME# disabled
    [    0.115241] pci 0000:00:1e.0: transparent bridge
    [    0.115249] pci 0000:00:1e.0: bridge io port: [0x2000-0x6fff]
    [    0.115257] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff]
    [    0.115265] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
    [    0.115313] pci_bus 0000:00: on NUMA node 0
    [    0.115323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.116076] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    [    0.116128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    [    0.121363] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    [    0.121688] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    [    0.122012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    [    0.122336] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    [    0.122660] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    [    0.122947] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [    0.123237] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [    0.123527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [    0.123976] SCSI subsystem initialized
    [    0.124149] libata version 3.00 loaded.
    [    0.124316] usbcore: registered new interface driver usbfs
    [    0.124355] usbcore: registered new interface driver hub
    [    0.124415] usbcore: registered new device driver usb
    [    0.124740] ACPI: WMI: Mapper loaded
    [    0.124745] PCI: Using ACPI for IRQ routing
    [    0.125120] Bluetooth: Core ver 2.15
    [    0.125187] NET: Registered protocol family 31
    [    0.125192] Bluetooth: HCI device and connection manager initialized
    [    0.125200] Bluetooth: HCI socket layer initialized
    [    0.125204] NetLabel: Initializing
    [    0.125208] NetLabel:  domain hash size = 128
    [    0.125212] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.125243] NetLabel:  unlabeled traffic allowed by default
    [    0.130098] pnp: PnP ACPI init
    [    0.130161] ACPI: bus type pnp registered
    [    0.136493] pnp: PnP ACPI: found 13 devices
    [    0.136501] ACPI: ACPI bus type pnp unregistered
    [    0.136509] PnPBIOS: Disabled by ACPI PNP
    [    0.136538] system 00:00: iomem range 0x0-0x9ffff could not be reserved
    [    0.136546] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
    [    0.136553] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
    [    0.136561] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
    [    0.136568] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
    [    0.136576] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
    [    0.136583] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
    [    0.136590] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
    [    0.136598] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
    [    0.136605] system 00:00: iomem range 0xec000-0xeffff could not be reserved
    [    0.136612] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
    [    0.136620] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    [    0.136628] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
    [    0.136645] system 00:02: ioport range 0x1000-0x107f has been reserved
    [    0.136653] system 00:02: ioport range 0x1180-0x11bf has been reserved
    [    0.136660] system 00:02: ioport range 0x15e0-0x15ef has been reserved
    [    0.136667] system 00:02: ioport range 0x1600-0x167f has been reserved
    [    0.171576] AppArmor: AppArmor Filesystem Enabled
    [    0.171638] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    [    0.171644] pci 0000:00:01.0:   IO window: disabled
    [    0.171652] pci 0000:00:01.0:   MEM window: 0xc0100000-0xc01fffff
    [    0.171659] pci 0000:00:01.0:   PREFETCH window: 0xe0000000-0xebffffff
    [    0.171675] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
    [    0.171681] pci 0000:02:00.0:   IO window: 0x002000-0x0020ff
    [    0.171689] pci 0000:02:00.0:   IO window: 0x002400-0x0024ff
    [    0.171697] pci 0000:02:00.0:   PREFETCH window: 0xf0000000-0xf3ffffff
    [    0.171705] pci 0000:02:00.0:   MEM window: 0xc4000000-0xc7ffffff
    [    0.171713] pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
    [    0.171719] pci 0000:02:00.1:   IO window: 0x002800-0x0028ff
    [    0.171727] pci 0000:02:00.1:   IO window: 0x002c00-0x002cff
    [    0.171734] pci 0000:02:00.1:   PREFETCH window: 0xf4000000-0xf7ffffff
    [    0.171742] pci 0000:02:00.1:   MEM window: 0xc8000000-0xcbffffff
    [    0.171751] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    [    0.171757] pci 0000:00:1e.0:   IO window: 0x2000-0x6fff
    [    0.171766] pci 0000:00:1e.0:   MEM window: 0xc0200000-0xcfffffff
    [    0.171774] pci 0000:00:1e.0:   PREFETCH window: 0xf0000000-0xf7ffffff
    [    0.171798] pci 0000:00:1e.0: setting latency timer to 64
    [    0.172409] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    [    0.172417] PCI: setting IRQ 11 as level-triggered
    [    0.172426] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    [    0.172972] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    [    0.172980] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    [    0.172994] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.173001] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [    0.173008] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
    [    0.173015] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xebffffff]
    [    0.173021] pci_bus 0000:02: resource 0 io:  [0x2000-0x6fff]
    [    0.173028] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff]
    [    0.173034] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
    [    0.173040] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
    [    0.173046] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
    [    0.173053] pci_bus 0000:03: resource 0 io:  [0x2000-0x20ff]
    [    0.173059] pci_bus 0000:03: resource 1 io:  [0x2400-0x24ff]
    [    0.173065] pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
    [    0.173072] pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff]
    [    0.173079] pci_bus 0000:07: resource 0 io:  [0x2800-0x28ff]
    [    0.173085] pci_bus 0000:07: resource 1 io:  [0x2c00-0x2cff]
    [    0.173091] pci_bus 0000:07: resource 2 pref mem [0xf4000000-0xf7ffffff]
    [    0.173097] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff]
    [    0.173192] NET: Registered protocol family 2
    [    0.173420] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.174081] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.174365] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.174681] TCP: Hash tables configured (established 16384 bind 16384)
    [    0.174688] TCP reno registered
    [    0.174918] NET: Registered protocol family 1
    [    0.175089] Trying to unpack rootfs image as initramfs...
    [    0.615646] Freeing initrd memory: 8020k freed
    [    0.637077] Simple Boot Flag at 0x35 set to 0x1
    [    0.637288] speedstep-lib: frequency transition measured seems out of range (6000 nSec), falling back to a safe one of500000 nSec.
    [    0.637305] cpufreq-nforce2: No nForce2 chipset.
    [    0.637368] Scanning for low memory corruption every 60 seconds
    [    0.637683] audit: initializing netlink socket (disabled)
    [    0.637724] type=2000 audit(1266489019.635:1): initialized
    [    0.654870] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.658647] VFS: Disk quotas dquot_6.5.2
    [    0.658778] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.660220] fuse init (API version 7.12)
    [    0.660420] msgmni has been set to 992
    [    0.660871] alg: No test for stdrng (krng)
    [    0.660901] io scheduler noop registered
    [    0.660907] io scheduler anticipatory registered
    [    0.660911] io scheduler deadline registered
    [    0.661023] io scheduler cfq registered (default)
    [    0.661112] pci 0000:01:00.0: Boot video device
    [    0.661151] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
    [    0.661335] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.661386] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.662005] ACPI: AC Adapter [AC] (on-line)
    [    0.662142] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    [    0.662152] ACPI: Power Button [PWRF]
    [    0.662251] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [    0.662655] ACPI: Lid Switch [LID]
    [    0.662747] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [    0.662757] ACPI: Sleep Button [SLPB]
    [    0.663095] Marking TSC unstable due to TSC halts in idle
    [    0.663128] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    [    0.663182] processor LNXCPU:00: registered as cooling_device0
    [    0.663705] Switched to high resolution mode on CPU 0
    [    0.671355] thermal LNXTHERM:01: registered as thermal_zone0
    [    0.671372] ACPI: Thermal Zone [THM0] (50 C)
    [    0.671472] isapnp: Scanning for PnP cards...
    [    1.024745] isapnp: No Plug & Play device found
    [    1.027462] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    1.028988] serial 00:0a: activated
    [    1.029113] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
    [    1.031397] brd: module loaded
    [    1.032476] loop: module loaded
    [    1.032661] input: Macintosh mouse button emulation as /devices/virtual/input/input3
    [    1.032905] ata_piix 0000:00:1f.1: version 2.13
    [    1.032926] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
    [    1.033560] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    [    1.033570] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    [    1.033651] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    1.033858] scsi0 : ata_piix
    [    1.034128] scsi1 : ata_piix
    [    1.035756] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
    [    1.035763] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
    [    1.038214] Fixed MDIO Bus: probed
    [    1.038299] PPP generic driver version 2.4.2
    [    1.038531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.038575] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.038611] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.066445] ACPI: Battery Slot [BAT0] (battery present)
    [    1.070792] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    [    1.070812] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    [    1.070827] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    1.070835] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    1.070972] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [    1.071009] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
    [    1.071206] usb usb1: configuration #1 chosen from 1 choice
    [    1.071274] hub 1-0:1.0: USB hub found
    [    1.071292] hub 1-0:1.0: 2 ports detected
    [    1.071874] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
    [    1.072464] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    [    1.072473] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
    [    1.072485] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    1.072491] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    1.072563] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [    1.072593] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
    [    1.072790] usb usb2: configuration #1 chosen from 1 choice
    [    1.072856] hub 2-0:1.0: USB hub found
    [    1.072872] hub 2-0:1.0: 2 ports detected
    [    1.072960] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    [    1.072973] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    1.072979] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    1.073056] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    [    1.073084] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
    [    1.073259] usb usb3: configuration #1 chosen from 1 choice
    [    1.073323] hub 3-0:1.0: USB hub found
    [    1.073339] hub 3-0:1.0: 2 ports detected
    [    1.073534] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [    1.080820] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.080835] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    1.080964] mice: PS/2 mouse device common for all mice
    [    1.081178] rtc_cmos 00:06: RTC can wake from S4
    [    1.081253] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [    1.081279] rtc0: alarms up to one year, y3k, 114 bytes nvram
    [    1.081525] device-mapper: uevent: version 1.0.3
    [    1.081757] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    1.081932] device-mapper: multipath: version 1.1.0 loaded
    [    1.081938] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    1.082259] EISA: Probing bus 0 at eisa.0
    [    1.082270] Cannot allocate resource for EISA slot 1
    [    1.082276] Cannot allocate resource for EISA slot 2
    [    1.082281] Cannot allocate resource for EISA slot 3
    [    1.082286] Cannot allocate resource for EISA slot 4
    [    1.082291] Cannot allocate resource for EISA slot 5
    [    1.082296] Cannot allocate resource for EISA slot 6
    [    1.082322] EISA: Detected 0 cards.
    [    1.082513] cpuidle: using governor ladder
    [    1.082646] cpuidle: using governor menu
    [    1.083876] TCP cubic registered
    [    1.084296] NET: Registered protocol family 10
    [    1.085341] lo: Disabled Privacy Extensions
    [    1.086089] NET: Registered protocol family 17
    [    1.086134] Bluetooth: L2CAP ver 2.13
    [    1.086138] Bluetooth: L2CAP socket layer initialized
    [    1.086145] Bluetooth: SCO (Voice Link) ver 0.6
    [    1.086149] Bluetooth: SCO socket layer initialized
    [    1.086246] Bluetooth: RFCOMM TTY layer initialized
    [    1.086254] Bluetooth: RFCOMM socket layer initialized
    [    1.086258] Bluetooth: RFCOMM ver 1.11
    [    1.086556] Using IPI No-Shortcut mode
    [    1.086721] PM: Resume from disk failed.
    [    1.086749] registered taskstats version 1
    [    1.087003]   Magic number: 14:862:527
    [    1.087152] rtc_cmos 00:06: setting system clock to 2010-02-18 10:30:20 UTC (1266489020)
    [    1.087159] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.087164] EDD information not available.
    [    1.089382] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [    1.168086] Clocksource tsc unstable (delta = -77632633 ns)
    [    1.200641] ata2.00: ATAPI: MATSHITADVD-ROM SR-8175, G228, max UDMA/33
    [    1.201345] ata1.00: ATA-5: IC25N030ATDA04-0, DA4OA76A, max UDMA/100
    [    1.201352] ata1.00: 58605120 sectors, multi 16: LBA
    [    1.208478] ata2.00: configured for UDMA/33
    [    1.216624] ata1.00: configured for UDMA/100
    [    1.216897] scsi 0:0:0:0: Direct-Access     ATA      IC25N030ATDA04-0 DA4O PQ: 0 ANSI: 5
    [    1.217150] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.217241] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
    [    1.217366] sd 0:0:0:0: [sda] Write Protect is off
    [    1.217373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.217438] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.217769]  sda:
    [    1.218907] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-ROM SR-8175  G228 PQ: 0 ANSI: 5
    [    1.219611] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
    [    1.219618] Uniform CD-ROM driver Revision: 3.20
    [    1.219803] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.219897] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [    1.236960]  sda1 sda2 < sda5 >
    [    1.260276] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.260312] Freeing unused kernel memory: 540k freed
    [    1.261270] Write protecting the kernel text: 4568k
    [    1.261356] Write protecting the kernel read-only data: 1836k
    [    1.392200] usb 2-1: new full speed USB device using uhci_hcd and address 2
    [    1.697094] Linux agpgart interface v0.103
    [    1.730944] agpgart-intel 0000:00:00.0: Intel 830M Chipset
    [    1.747532] usb 2-1: configuration #1 chosen from 1 choice
    [    1.847074] Floppy drive(s): fd0 is 1.44M
    [    1.863229] FDC 0 is a National Semiconductor PC87306
    [    1.927808] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input5
    [    1.927915] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
    [    1.933076] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [    1.946984] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [    1.946993] e100: Copyright(c) 1999-2006 Intel Corporation
    [    1.947766] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
    [    1.947777] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
    [    1.971471] e100 0000:02:08.0: PME# disabled
    [    1.978645] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:d0:59:aa:57:d4
    [    2.695427] xor: automatically using best checksumming function: pIII_sse
    [    2.712024]    pIII_sse  :  2641.000 MB/sec
    [    2.712030] xor: using function: pIII_sse (2641.000 MB/sec)
    [    2.720530] device-mapper: dm-raid45: initialized v0.2594b
    [    3.226020] PM: Starting manual resume from disk
    [    3.226030] PM: Resume from partition 8:5
    [    3.226034] PM: Checking hibernation image.
    [    3.226377] PM: Resume from disk failed.
    [    3.256839] EXT4-fs (sda1): barriers enabled
    [    3.298512] kjournald2 starting: pid 347, dev sda1:8, commit interval 5 seconds
    [    3.298547] EXT4-fs (sda1): delayed allocation enabled
    [    3.298555] EXT4-fs: file extents enabled
    [    3.305012] EXT4-fs: mballoc enabled
    [    3.305048] EXT4-fs (sda1): mounted filesystem with ordered data mode
    [    5.548517] Adding 1253028k swap on /dev/sda5.  Priority:-1 extents:1 across:1253028k
    [    6.094417] EXT4-fs (sda1): internal journal on sda1:8
    [    7.413064] udev: starting version 147
    [    8.763010] Non-volatile memory driver v1.3
    [    8.796835] parport_pc 00:0b: reported by Plug and Play ACPI
    [    8.796883] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    [    9.183413] lp0: using parport0 (interrupt-driven).
    [    9.385574] irda_init()
    [    9.385609] NET: Registered protocol family 23
    [    9.395202] ppdev: user-space parallel port driver
    [    9.459263] nsc-ircc 00:0c: activated
    [    9.459274] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
    [    9.459316] nsc-ircc, chip->init
    [    9.459328] nsc-ircc, Found chip at base=0x02e
    [    9.459353] nsc-ircc, driver loaded (Dag Brattli)
    [    9.461015] IrDA: Registered device irda0
    [    9.461021] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    [    9.751481] thinkpad_acpi: ThinkPad ACPI Extras v0.23
    [    9.751488] thinkpad_acpi: http://ibm-acpi.sf.net/
    [    9.751493] thinkpad_acpi: ThinkPad BIOS 1AET51WW (1.08a), EC unknown
    [    9.771776] Registered led device: tpacpi::thinklight
    [    9.771880] Registered led device: tpacpi::power
    [    9.771931] Registered led device: tpacpi::standby
    [    9.774858] input: ThinkPad Extra Buttons as /devices/virtual/input/input6
    [    9.936377] psmouse serio1: ID: 10 00 64
    [    9.998357] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   10.178678] IBM TrackPoint firmware: 0x0e, buttons: 3/3
    [   10.193437] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
    [   10.432357] Intel 82802 RNG detected
    [   10.549934] cfg80211: Calling CRDA to update world regulatory domain
    [   10.708271] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   10.893873] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:023b]
    [   10.893898] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
    [   10.893904] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
    [   10.893912] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
    [   11.124530] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
    [   11.124540] yenta_cardbus 0000:02:00.0: Socket status: 30000006
    [   11.124556] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
    [   11.124566] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x6fff: clean.
    [   11.126624] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
    [   11.126633] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
    [   11.126985] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:023b]
    [   11.127005] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
    [   11.127011] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
    [   11.127020] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
    [   11.360860] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
    [   11.360870] yenta_cardbus 0000:02:00.1: Socket status: 30000006
    [   11.360887] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
    [   11.360897] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x2000-0x6fff: clean.
    [   11.362978] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
    [   11.362986] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
    [   12.059904] cfg80211: World regulatory domain updated:
    [   12.059914]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   12.059922]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.059929]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   12.059936]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   12.059942]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.059949]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.114949] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
    [   12.115867] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    [   12.117432] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
    [   12.117806] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
    [   12.118464] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
    [   12.119364] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
    [   12.120326] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    [   12.120758] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    [   12.121155] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    [   12.121814] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    [   13.892126] phy0: Selected rate control algorithm 'minstrel'
    [   13.893920] Registered led device: rt73usb-phy0::radio
    [   13.893963] Registered led device: rt73usb-phy0::assoc
    [   13.894002] Registered led device: rt73usb-phy0::quality
    [   13.897023] usbcore: registered new interface driver rt73usb
    [   14.399906] udev: renamed network interface wlan0 to wlan2
    [   14.677120] Intel ICH 0000:00:1f.5: enabling device (0000 -> 0001)
    [   14.677142] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
    [   14.677169] Intel ICH 0000:00:1f.5: setting latency timer to 64
    [   15.476106] intel8x0_measure_ac97_clock: measured 54513 usecs (2620 samples)
    [   15.476116] intel8x0: clocking to 48000
    [   16.358329] rt73usb 2-1:1.0: firmware: requesting rt73.bin
    [   17.361431] ADDRCONF(NETDEV_UP): wlan2: link is not ready
    [   17.385767] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   19.816254] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
    [   19.816440] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   24.716380] [drm] Initialized drm 1.1.0 20060810
    [   24.760300] pci 0000:01:00.0: power state changed by ACPI to D0
    [   24.760323] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
    [   24.760953] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0
    [   30.728090] eth0: no IPv6 routers present
    [   62.379375] UDF-fs: No VRS found
    [   62.379388] UDF-fs: No partition found (1)
    [   62.418049] ISO 9660 Extensions: Microsoft Joliet Level 3
    [   62.420407] ISOFS: changing to secondary root
    paulnrhodes@paulnrhodes-laptop ~ $

Page 2 of 3 FirstFirst 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •