Results 1 to 10 of 27
hello all, im on a fujitsu simens wirth an amilo intel chip using mandrake ,
and to connect to wireless i use a usb pendrive by dlink DWA140 because my ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 03-04-2010 #1Just Joined!
- Join Date
- Mar 2010
- Posts
- 19
mandriva 2010.0 and DWA140 usb wireless
hello all, im on a fujitsu simens wirth an amilo intel chip using mandrake ,
and to connect to wireless i use a usb pendrive by dlink DWA140 because my internel PCI is kind of broken (cant turn it on with the switch) and i read the treath up and i need some help
here is the info
thx for the help
Code:============ lspci ============ ============ lsusb ============ Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 07d1:3c0a D-Link System Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ============ lsmod ============ Module Size Used by rt2800usb 36804 0 rt2x00usb 11652 1 rt2800usb rt2x00lib 30116 2 rt2800usb,rt2x00usb input_polldev 3852 1 rt2x00lib ipt_IFWLOG 2792 23 ipt_psd 43688 1 xt_time 2596 0 xt_connlimit 4140 0 xt_realm 1348 0 iptable_raw 1924 0 xt_comment 1380 18 xt_recent 10248 0 xt_policy 2884 0 ipt_ULOG 9508 0 ipt_REJECT 2884 2 ipt_REDIRECT 2340 0 ipt_NETMAP 2308 0 ipt_MASQUERADE 3172 0 ipt_ECN 2308 0 ipt_ecn 1796 0 ipt_CLUSTERIP 7592 0 ipt_ah 1508 0 ipt_addrtype 2276 4 nf_nat_tftp 1412 0 nf_nat_snmp_basic 8748 0 nf_nat_sip 6436 0 nf_nat_pptp 5284 0 nf_nat_proto_gre 3400 1 nf_nat_pptp nf_nat_irc 2436 0 nf_nat_h323 9252 0 nf_nat_ftp 3684 0 nf_nat_amanda 1732 0 ts_kmp 2116 5 nf_conntrack_amanda 3716 1 nf_nat_amanda nf_conntrack_sane 5728 0 nf_conntrack_tftp 5016 1 nf_nat_tftp nf_conntrack_sip 18680 1 nf_nat_sip nf_conntrack_proto_sctp 12460 0 nf_conntrack_pptp 12008 1 nf_nat_pptp nf_conntrack_proto_gre 7720 1 nf_conntrack_pptp nf_conntrack_netlink 17444 0 nf_conntrack_netbios_ns 2276 0 nf_conntrack_irc 6120 1 nf_nat_irc nf_conntrack_h323 60648 1 nf_nat_h323 nf_conntrack_ftp 12296 1 nf_nat_ftp ipt_set 1892 2 ipt_SET 2116 0 ip_set_nethash 8588 0 ip_set_iptreemap 8796 0 ip_set_iptree 6156 2 ip_set_ipporthash 7756 0 ip_set_portmap 4076 0 ip_set_macipmap 3980 0 ip_set_ipmap 3852 0 ip_set_iphash 7052 0 ip_set 19904 18 ipt_set,ipt_SET,ip_set_nethash,ip_set_iptreemap,ip_set_iptree,ip_set_ipporthash,ip_set_portmap,ip_set_macipmap,ip_set_ipmap,ip_set_iphash xt_tcpmss 1924 0 xt_pkttype 1508 0 xt_physdev 2228 0 xt_owner 2532 0 xt_NFQUEUE 2532 0 xt_NFLOG 1540 0 nfnetlink_log 9220 1 xt_NFLOG xt_multiport 3012 8 xt_MARK 2020 0 xt_mark 1636 0 xt_mac 1476 0 xt_limit 2280 0 xt_length 1604 0 xt_iprange 3396 0 xt_helper 1892 0 xt_hashlimit 9812 0 xt_DSCP 2980 0 xt_dscp 2244 0 xt_dccp 2668 0 xt_conntrack 4228 0 xt_CONNMARK 2660 0 xt_connmark 2084 0 xt_CLASSIFY 1412 0 ipt_LOG 5928 6 xt_tcpudp 2884 31 xt_state 1924 30 iptable_nat 6180 0 nf_nat 21624 12 ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,nf_nat_tftp,nf_nat_sip,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,iptable_nat nf_conntrack_ipv4 15856 33 iptable_nat,nf_nat nf_defrag_ipv4 1796 1 nf_conntrack_ipv4 nf_conntrack 76768 31 xt_connlimit,ipt_MASQUERADE,ipt_CLUSTERIP,nf_nat_tftp,nf_nat_snmp_basic,nf_nat_sip,nf_nat_pptp,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,nf_conntrack_amanda,nf_conntrack_sane,nf_conntrack_tftp,nf_conntrack_sip,nf_conntrack_proto_sctp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_conntrack_netlink,nf_conntrack_netbios_ns,nf_conntrack_irc,nf_conntrack_h323,nf_conntrack_ftp,xt_helper,xt_conntrack,xt_CONNMARK,xt_connmark,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 iptable_mangle 2500 1 nfnetlink 4768 2 nf_conntrack_netlink,nfnetlink_log iptable_filter 2468 1 ip_tables 11700 4 iptable_raw,iptable_nat,iptable_mangle,iptable_filter x_tables 16936 47 ipt_IFWLOG,ipt_psd,xt_time,xt_connlimit,xt_realm,xt_comment,xt_recent,xt_policy,ipt_ULOG,ipt_REJECT,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,ipt_ECN,ipt_ecn,ipt_CLUSTERIP,ipt_ah,ipt_addrtype,ipt_set,ipt_SET,xt_tcpmss,xt_pkttype,xt_physdev,xt_owner,xt_NFQUEUE,xt_NFLOG,xt_multiport,xt_MARK,xt_mark,xt_mac,xt_limit,xt_length,xt_iprange,xt_helper,xt_hashlimit,xt_DSCP,xt_dscp,xt_dccp,xt_conntrack,xt_CONNMARK,xt_connmark,xt_CLASSIFY,ipt_LOG,xt_tcpudp,xt_state,iptable_nat,ip_tables fuse 60704 2 ppp_async 8804 0 ppp_generic 24984 1 ppp_async slhc 6052 1 ppp_generic crc_ccitt 1860 2 rt2800usb,ppp_async af_packet 20100 2 ipv6 275824 20 arc4 1732 2 ecb 2660 2 snd_atiixp_modem 12204 0 snd_atiixp 15952 3 snd_ac97_codec 103912 2 snd_atiixp_modem,snd_atiixp ac97_bus 1604 1 snd_ac97_codec ath5k 145364 0 snd_seq_dummy 2696 0 snd_seq_oss 31712 0 snd_seq_midi_event 7236 1 snd_seq_oss snd_seq 54672 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 7248 3 snd_seq_dummy,snd_seq_oss,snd_seq mac80211 149236 3 rt2x00usb,rt2x00lib,ath5k snd_pcm_oss 44672 0 ath 8004 1 ath5k snd_pcm 82664 4 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss ohci1394 29908 0 snd_timer 22124 2 snd_seq,snd_pcm b44 28916 0 snd_mixer_oss 16612 1 snd_pcm_oss cfg80211 89956 4 rt2x00lib,ath5k,mac80211,ath sdhci_pci 7684 0 sdhci 20392 1 sdhci_pci snd 62564 16 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss ssb 44428 1 b44 led_class 4200 3 rt2x00lib,ath5k,sdhci rfkill 19032 1 cfg80211 soundcore 8128 1 snd mii 5348 1 b44 sg 29624 0 ieee1394 87244 1 ohci1394 pcspkr 2436 0 sr_mod 16132 0 serio_raw 5448 0 i2c_piix4 12820 0 snd_page_alloc 9164 3 snd_atiixp_modem,snd_atiixp,snd_pcm shpchp 32728 0 pci_hotplug 29636 1 shpchp radeon 358048 2 drm 161472 3 radeon i2c_core 29272 2 i2c_piix4,drm binfmt_misc 8364 1 pcmcia 36264 1 ssb yenta_socket 37008 1 rsrc_nonstatic 11588 1 yenta_socket pcmcia_core 36024 4 ssb,pcmcia,yenta_socket,rsrc_nonstatic cpufreq_ondemand 6896 0 cpufreq_conservative 7184 0 cpufreq_powersave 1380 0 p4_clockmod 4484 0 freq_table 4452 2 cpufreq_ondemand,p4_clockmod speedstep_lib 4456 1 p4_clockmod tifm_sd 11980 0 mmc_block 10824 0 mmc_core 58400 3 sdhci,tifm_sd,mmc_block tifm_7xx1 6884 0 tifm_core 8064 2 tifm_sd,tifm_7xx1 nvram 7536 0 processor 35764 1 joydev 10176 0 evdev 9824 9 ehci_hcd 47604 0 ohci_hcd 32084 0 fan 4264 0 button 5396 0 thermal 13248 0 usbcore 185776 5 rt2800usb,rt2x00usb,ehci_hcd,ohci_hcd battery 10312 0 ac 4040 0 ata_generic 4648 0 ide_pci_generic 3848 0 pata_acpi 4036 0 atiixp 3624 0 ide_gd_mod 25288 0 ide_core 106156 3 ide_pci_generic,atiixp,ide_gd_mod pata_atiixp 4740 3 libata 177580 3 ata_generic,pata_acpi,pata_atiixp sd_mod 36032 4 scsi_mod 155476 4 sg,sr_mod,libata,sd_mod crc_t10dif 1668 1 sd_mod ext4 310824 2 jbd2 77664 1 ext4 crc16 1828 1 ext4 ============ dmesg-firmware ============ ============ kernel version ============ 2.6.31.5-desktop586-1mnb ============ ifconfig ============ eth0 Link encap:Ethernet Endereço de HW 00:40:CA:D9:CA:73 UP BROADCASTRUNNING MULTICAST MTU:1500 Métrica:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) IRQ:20 lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACKRUNNING MTU:16436 Métrica:1 RX packets:2544 errors:0 dropped:0 overruns:0 frame:0 TX packets:2544 errors:0 dropped:0 overruns:0 carrier:0 colisões:0 txqueuelen:0 RX bytes:160272 (156.5 KiB) TX bytes:160272 (156.5 KiB) ============ iwconfig ============ wlan0 IEEE 802.11bg ESSID:"dlink" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
- 03-04-2010 #2
The rt2800usb drive, which is loading, ought to be correct. But I've seen a lot of references to trouble with this wireless device and these drivers. The possible solutions aren't particularly easy. Here is a guide (and long thread) from the Ubuntu forums on it.
[SOLVED] Karmic RT2870 Driver Tutorial - Ubuntu Forums
The information is applicable to Mandriva as well, but some commands or packages will be different.
I don't think Mandriva uses sudo, so whenever 'sudo' is used in the guide, just think run as root. You can log in as root from the terminal by typing su.
Or you can run a particular command as root with
If you choose to try and compile a driver, the package build-essential is Debian/Ubuntu specific. Mandriva has something similar, but I don't know what they call it.Code:su -c 'command'
Gedit can be replaced with kate or kwrite if you're using KDE, or any other text editor of your choice.
I think that should pretty much cover the differences. Oh, with some commands such as ifconfig, if you get a command not found, preface it with /sbin/ as so
Code:/sbin/ifconfig
- 03-04-2010 #3
Hello, and welcome to Linux Forums!

Even though it doesn't seem to indicate it, I believe that you need to add firmware. According to this website, you should download the RT2870USB(RT2870/RT2770) firmware package from Ralink.
Ralink corp.
Open a terminal and cd (change directory) to where you saved the zipped file. Then unzip the file.
Now cd to the unzipped folder and then copy the rt2870.bin file to the /lib/firmware folder. You will need root permissions to do this.Code:unzip RT2870_Firmware_V8.zip
Code:cd RT2870_Firmware_V8
Code:su <enter> Password:<enter root password>
Then reboot, and see if the wireless will work.Code:cp rt2870.bin /lib/firmware
This is a very new driver, and may be buggy. There is a driver released by Ralink that may be better. It would be found on the same web site that the firmware was downloaded from. If you need to use that driver, we will have to help you install it.Paul
Please do not send Private Messages to me with requests for help. I will not reply.
- 03-05-2010 #4Just Joined!
- Join Date
- Mar 2010
- Posts
- 19
I went In the rakink site and downloaded the firmware rt2870usb and extracted and copied the rt2870.bin to the /lib/firmware
went in the mcc to instal the adapter choose rakink 11n adapter and it gibes me a message saying can't find the network interface for the selected adapter, (use controler rt2800usb)
should I try and find this firmware package?
- 03-05-2010 #5
It sounds like you just installed the firmware, so I don't know what other firmware your are referring to.
I didn't have to set up my wireless in Mandriva, it just worked out-of-the-box. But it is an Atheros wireless. When you go into the network/wireless configuration section, what is listed?Paul
Please do not send Private Messages to me with requests for help. I will not reply.
- 03-06-2010 #6Just Joined!
- Join Date
- Mar 2010
- Posts
- 19
I've been looking in google and I found a forum were they speak that even limeme with the firmware instaled they can't used the USB stick , something about the firmware being broken, I must wait
I have a bilt in atheros, I can instalit but I can search for networks
this Is because normaly I have a switch iny laptop and gives me a light wen it's on but the switch doesent work, this problem I have wen I use to use windows also,
it was from this that I used the dwa
- 03-06-2010 #7
You didn't answer my question on what the MCC shows in this section:
Network & Internet>Set up a new network interface>Wireless (Wi-Fi)
It just may be that this driver is buggy, as I said. It is also possible that the info you read is old, and the problem you read about has already been fixed.
Your best bet may be using the proprietary Ralink driver. I am unsure on exactly how to do that in Manadriva, so I will need to look into it.
There may be a way to get the internal wireless card to work, in Linux anyway. There is a contact on the card designated to interface with an On/Off switch. Covering that contact with a thin piece of tape may then allow it to function. This means temporarily removing the card from the laptop to do this.
What type of card is it? is it Mini-PCI or Mini-PCI-Express?
The pin that you need to cover is called W_DISABLE. I know which pin that is on a Mini-PCI-express card, but unsure of the older Mini-PCI card. I'll advise you further on this if you are interested.
EDIT: I found a picture of a mini-PCIe card with pin #20 covered with black tape. It is two pins to the left of the "notch". It is on the underside of the card.
3gpciepins.png (image)
More EDIT: I found some info that a hardware switch may use pin #7, so that would be the pin to cover. Some experimentation may be required by you.
Here's a picture of the pin to cover in a regular MiniPCI card. It is incorrectly listed as pin #7, when it is actually pin #13. You have to count the pins on the backside too!
http://www.minipci.biz/pin7.jpgLast edited by waterhead; 03-06-2010 at 02:02 PM.
Paul
Please do not send Private Messages to me with requests for help. I will not reply.
- 03-06-2010 #8Just Joined!
- Join Date
- Mar 2010
- Posts
- 19
In the mcc it shows me wlan0 : atheros communications inc. AR2413 802.11bg NIC
and to use ndiswrapper
Im not shure if it a mini pci or the express
And do y know were i must open the laptop to take the pci?
- 03-06-2010 #9
If you have never opened your laptop to add RAM memory or change the hard drive (or just to take a look), then this method may be beyond your capabilities. Most Linux users tend to be tinkerers or hackers, and this would not be a big deal for them.
Paul
Please do not send Private Messages to me with requests for help. I will not reply.
- 03-06-2010 #10Just Joined!
- Join Date
- Mar 2010
- Posts
- 19
My desktop pc i open it chance ir and add things just my laptop Notverordnung, just some months I'm using the laptop and this one I never open but I'll take a look at it


Reply With Quote
