Find the answer to your Linux question:
Page 2 of 4 FirstFirst 1 2 3 4 LastLast
Results 11 to 20 of 32
Just to get everything in one place. Attansic Drivers atl1c page at elrepo RHEL5 - Linux Wireless...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651

    Just to get everything in one place.

    Attansic Drivers

    atl1c page at elrepo

    RHEL5 - Linux Wireless

  2. #12
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    Thanks.

    I was just checking the threads about this at "the other Linux forum". I see that they are really getting down on bunkdeath for trying RHEL.

    We try to be much nicer here at LinuxForums. I understand why one may want to try RHEL, as I tried it too! Even after getting an internet connection, there won't be any updates for it. But you can still use third party repositories, and get the feel of the operating system.
    Please do not send Private Messages to me with requests for help. I will not reply.

  3. #13
    Just Joined!
    Join Date
    Mar 2010
    Posts
    15
    As i read forums throughly, i found CentOS is like RedHat, so i thought of downloading CentOS and check for my problem if it solves or not. After i installed i found:

    My other partition is not shown.( My previous partition where i installed RedHat )

    My problem is same as it is.

    I couldnot install RedHat for now now i am sending some information of CentOS ( sorry for the change in OS ). anyway i am lookng forward for my problems to be solved in RedHat too. i couldnot load RedHat for now, so i couldnot provide the information of uname -rm.

    For CentOS

    Code:
    lspci -vnn
    
    00:00.0 0600: 8086:2a40 (rev 09)
    	Subsystem: 1025:0260
    	Flags: bus master, fast devsel, latency 0
    	Capabilities: [e0] Vendor Specific Information
    
    00:02.0 0300: 8086:2a42 (rev 09)
    	Subsystem: 1025:0260
    	Flags: bus master, fast devsel, latency 0, IRQ 177
    	Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
    	Memory at 80000000 (64-bit, prefetchable) [size=256M]
    	I/O ports at 5110 [size=8]
    	Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
    	Capabilities: [d0] Power Management version 3
    
    00:02.1 0380: 8086:2a43 (rev 09)
    	Subsystem: 1025:0260
    	Flags: bus master, fast devsel, latency 0
    	Memory at 93400000 (64-bit, non-prefetchable) [size=1M]
    	Capabilities: [d0] Power Management version 3
    
    00:1a.0 0c03: 8086:2937 (rev 03)
    	Subsystem: 1025:0260
    	Flags: bus master, medium devsel, latency 0, IRQ 50
    	I/O ports at 50e0 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1a.1 0c03: 8086:2938 (rev 03)
    	Subsystem: 1025:0260
    	Flags: bus master, medium devsel, latency 0, IRQ 225
    	I/O ports at 50c0 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1a.7 0c03: 8086:293c (rev 03) (prog-if 20)
    	Subsystem: 1025:0260
    	Flags: bus master, medium devsel, latency 0, IRQ 225
    	Memory at 96705c00 (32-bit, non-prefetchable) [size=1K]
    	Capabilities: [50] Power Management version 2
    	Capabilities: [58] Debug port
    	Capabilities: [98] #13 [0306]
    
    00:1b.0 0403: 8086:293e (rev 03)
    	Subsystem: 1025:0260
    	Flags: bus master, fast devsel, latency 0, IRQ 74
    	Memory at 96700000 (64-bit, non-prefetchable) [size=16K]
    	Capabilities: [50] Power Management version 2
    	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    	Capabilities: [70] Express Unknown type IRQ 0
    	Capabilities: [100] Virtual Channel
    	Capabilities: [130] Unknown (5)
    
    00:1c.0 0604: 8086:2940 (rev 03)
    	Flags: bus master, fast devsel, latency 0
    	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    	I/O behind bridge: 00004000-00004fff
    	Memory behind bridge: 95700000-966fffff
    	Prefetchable memory behind bridge: 0000000090400000-0000000091300000
    	Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    	Capabilities: [90] #0d [0000]
    	Capabilities: [a0] Power Management version 2
    	Capabilities: [100] Virtual Channel
    	Capabilities: [180] Unknown (5)
    
    00:1c.1 0604: 8086:2942 (rev 03)
    	Flags: bus master, fast devsel, latency 0
    	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    	I/O behind bridge: 00003000-00003fff
    	Memory behind bridge: 94600000-956fffff
    	Prefetchable memory behind bridge: 0000000091400000-0000000092300000
    	Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    	Capabilities: [90] #0d [0000]
    	Capabilities: [a0] Power Management version 2
    	Capabilities: [100] Virtual Channel
    	Capabilities: [180] Unknown (5)
    
    00:1c.2 0604: 8086:2944 (rev 03)
    	Flags: bus master, fast devsel, latency 0
    	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    	I/O behind bridge: 00001000-00002fff
    	Memory behind bridge: 93500000-945fffff
    	Prefetchable memory behind bridge: 0000000092400000-0000000093300000
    	Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    	Capabilities: [90] #0d [0000]
    	Capabilities: [a0] Power Management version 2
    	Capabilities: [100] Virtual Channel
    	Capabilities: [180] Unknown (5)
    
    00:1d.0 0c03: 8086:2934 (rev 03)
    	Subsystem: 1025:0260
    	Flags: bus master, medium devsel, latency 0, IRQ 233
    	I/O ports at 50a0 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1d.1 0c03: 8086:2935 (rev 03)
    	Subsystem: 1025:0260
    	Flags: bus master, medium devsel, latency 0, IRQ 58
    	I/O ports at 5080 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1d.2 0c03: 8086:2936 (rev 03)
    	Subsystem: 1025:0260
    	Flags: bus master, medium devsel, latency 0, IRQ 50
    	I/O ports at 5060 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1d.3 0c03: 8086:2939 (rev 03)
    	Subsystem: 1025:0260
    	Flags: bus master, medium devsel, latency 0, IRQ 185
    	I/O ports at 5040 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1d.7 0c03: 8086:293a (rev 03) (prog-if 20)
    	Subsystem: 1025:0260
    	Flags: bus master, medium devsel, latency 0, IRQ 233
    	Memory at 96705800 (32-bit, non-prefetchable) [size=1K]
    	Capabilities: [50] Power Management version 2
    	Capabilities: [58] Debug port
    	Capabilities: [98] #13 [0306]
    
    00:1e.0 0604: 8086:2448 (rev 93) (prog-if 01)
    	Flags: bus master, fast devsel, latency 0
    	Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
    	Capabilities: [50] #0d [0000]
    
    00:1f.0 0601: 8086:2919 (rev 03)
    	Subsystem: 1025:0260
    	Flags: bus master, medium devsel, latency 0
    	Capabilities: [e0] Vendor Specific Information
    
    00:1f.2 0106: 8086:2929 (rev 03) (prog-if 01)
    	Subsystem: 1025:0260
    	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 66
    	I/O ports at 5108 [size=8]
    	I/O ports at 511c [size=4]
    	I/O ports at 5100 [size=8]
    	I/O ports at 5118 [size=4]
    	I/O ports at 5020 [size=32]
    	Memory at 96705000 (32-bit, non-prefetchable) [size=2K]
    	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/4 Enable+
    	Capabilities: [70] Power Management version 3
    	Capabilities: [a8] #12 [0010]
    	Capabilities: [b0] #13 [0306]
    
    00:1f.3 0c05: 8086:2930 (rev 03)
    	Subsystem: 1025:0260
    	Flags: medium devsel, IRQ 185
    	Memory at 96706000 (64-bit, non-prefetchable) [size=256]
    	I/O ports at 5000 [size=32]
    
    00:1f.6 1180: 8086:2932 (rev 03)
    	Subsystem: 1025:0260
    	Flags: fast devsel, IRQ 11
    	Memory at 96704000 (64-bit, non-prefetchable) [size=4K]
    	Capabilities: [50] Power Management version 3
    
    04:00.0 0280: 168c:002a (rev 01)
    	Subsystem: 1a32:0306
    	Flags: bus master, fast devsel, latency 0, IRQ 11
    	Memory at 94600000 (64-bit, non-prefetchable) [size=64K]
    	Capabilities: [40] Power Management version 2
    	Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
    	Capabilities: [60] Express Legacy Endpoint IRQ 0
    	Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
    	Capabilities: [100] Advanced Error Reporting
    	Capabilities: [140] Virtual Channel
    	Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
    
    05:00.0 0200: 1969:1063 (rev c0)
    	Subsystem: 1025:0260
    	Flags: bus master, fast devsel, latency 0, IRQ 11
    	Memory at 93500000 (64-bit, non-prefetchable) [size=256K]
    	I/O ports at 1000 [size=128]
    	Capabilities: [40] Power Management version 3
    	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    	Capabilities: [58] Express Endpoint IRQ 0
    	Capabilities: [6c] Vital Product Data
    	Capabilities: [100] Advanced Error Reporting
    	Capabilities: [180] Device Serial Number ff-22-26-00-b5-09-4f-ff
    Code:
    dmesg
    
    Linux version 2.6.18-164.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:33:56 EDT 2009
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
     BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000007b96c000 (usable)
     BIOS-e820: 000000007b96c000 - 000000007b9bf000 (reserved)
     BIOS-e820: 000000007b9bf000 - 000000007ba83000 (usable)
     BIOS-e820: 000000007ba83000 - 000000007babf000 (ACPI NVS)
     BIOS-e820: 000000007babf000 - 000000007baea000 (usable)
     BIOS-e820: 000000007baea000 - 000000007baff000 (ACPI data)
     BIOS-e820: 000000007baff000 - 000000007bb00000 (usable)
     BIOS-e820: 000000007bb00000 - 0000000080000000 (reserved)
     BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
     BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
     BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
     BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    1083MB HIGHMEM available.
    896MB LOWMEM available.
    Memory for crash kernel (0x0 to 0x0) notwithin permissible range
    disabling kdump
    Using x86 segment limits to approximate NX protection
    On node 0 totalpages: 506624
      DMA zone: 4096 pages, LIFO batch:0
      Normal zone: 225280 pages, LIFO batch:31
      HighMem zone: 277248 pages, LIFO batch:31
    DMI 2.4 present.
    Using APIC driver default
    ACPI: RSDP (v002 ACRSYS                                ) @ 0x000fe020
    ACPI: XSDT (v001 ACRSYS ACRPRDCT 0x00000001      0x01000013) @ 0x7bafe120
    ACPI: FADT (v004 ACRSYS ACRPRDCT 0x00000001 1025 0x01000013) @ 0x7bafd000
    ACPI: HPET (v001 ACRSYS ACRPRDCT 0x00000001 1025 0x01000013) @ 0x7bafc000
    ACPI: MADT (v002 ACRSYS ACRPRDCT 0x00000001 1025 0x01000013) @ 0x7bafb000
    ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x00000001 1025 0x01000013) @ 0x7bafa000
    ACPI: ASF! (v032 ACRSYS ACRPRDCT 0x00000001 1025 0x01000013) @ 0x7baf9000
    ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x00000001 1025 0x01000013) @ 0x7baf8000
    ACPI: BOOT (v001 ACRSYS ACRPRDCT 0x00000001 1025 0x01000013) @ 0x7baeb000
    ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20051117) @ 0x7baea000
    ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00000001 1025 0x01000013) @ 0x00000000
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 7:7 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 7:7 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode:  Flat.  Using 1 I/O APICs
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
    Detected 2094.967 MHz processor.
    Built 1 zonelists.  Total pages: 506624
    Kernel command line: ro root=LABEL=/1 rhgb quiet
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    CPU 0 irqstacks, hard=c0761000 soft=c0741000
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2001216k/2026496k available (2154k kernel code, 23352k reserved, 899k data, 232k init, 1108336k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0, 0
    hpet0: 4 64-bit timers, 14318180 Hz
    Using HPET for base-timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.93 BogoMIPS (lpj=2094967)
    Security Framework v1.0.0 initialized
    SELinux:  Initializing.
    SELinux:  Starting in permissive mode
    selinux_register_security:  Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001
    CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 1024K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0400e39d 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    ACPI: Core revision 20060707
    CPU0: Intel Pentium(R) Dual-Core CPU       T4300  @ 2.10GHz stepping 0a
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 11000
    CPU 1 irqstacks, hard=c0762000 soft=c0742000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4189.47 BogoMIPS (lpj=2094737)
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001
    CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 1024K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0400e39d 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel Pentium(R) Dual-Core CPU       T4300  @ 2.10GHz stepping 0a
    Total of 2 processors activated (8379.40 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization across 2 CPUs: passed.
    Brought up 2 CPUs
    sizeof(vma)=84 bytes
    sizeof(page)=32 bytes
    sizeof(inode)=340 bytes
    sizeof(dentry)=136 bytes
    sizeof(ext3inode)=492 bytes
    sizeof(buffer_head)=52 bytes
    sizeof(skbuff)=176 bytes
    migration_cost=40
    checking if image is initramfs... it is
    Freeing initrd memory: 2481k freed
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: Device [J380] status [0000000a]: functional but not present; setting present
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 9 devices
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    pnp: 00:01: ioport range 0x164e-0x164f has been reserved
    PCI: Bridge: 0000:00:1c.0
      IO window: 4000-0000
      MEM window: 95700000-00000000
      PREFETCH window 0x0000000090400000-0x00000000913fffff
    PCI: Bridge: 0000:00:1c.1
      IO window: 3000-0000
      MEM window: 94600000-00000000
      PREFETCH window 0x0000000091400000-0x00000000923fffff
    PCI: Bridge: 0000:00:1c.2
      IO window: 1000-0000
      MEM window: 93500000-00000000
      PREFETCH window 0x0000000092400000-0x00000000933fffff
    PCI: Bridge: 0000:00:1e.0
      IO window: disabled.
      MEM window: disabled.
      PREFETCH window: disabled.
    PCI: Enabling device 0000:00:1c.0 (0001 -> 0003)
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Simple Boot Flag value 0x5 read from CMOS RAM was invalid
    Simple Boot Flag at 0x44 set to 0x1
    apm: BIOS not found.
    audit: initializing netlink socket (disabled)
    type=2000 audit(1269114538.988:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux:  Registering netfilter hooks
    Initializing Cryptographic API
    alg: No test for crc32c (crc32c-generic)
    ksign: Installing public key data
    Loading keyring
    - Added public key 581431131FF6A527
    - User ID: CentOS (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:00:02.0
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    Allocate Port Service[0000:00:1c.1:pcie03]
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    Allocate Port Service[0000:00:1c.2:pcie03]
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
    ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [   ApIst] [20060707]
    ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [   ApCst] [20060707]
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Processor [CPU1] (supports 8 throttling states)
    ACPI: Thermal Zone [TZ01] (51 C)
    Real Time Clock Driver v1.12ac
    hpet_resources: 0xfed00000 is busy
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected an Intel Mobile Intel(r) GM45 Express Chipset.
    agpgart: Detected 65532K stolen memory.
    agpgart: AGP aperture is 256M @ 0x80000000
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    brd: module loaded
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    ide-floppy driver 0.99.newide
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    TCP bic registered
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Time: tsc clocksource has been installed.
    ACPI: (supports S3 S4 S5)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 232k freed
    Write protecting the kernel read-only data: 404k
    Time: hpet clocksource has been installed.
    input: AT Translated Set 2 keyboard as /class/input/input0
    ACPI: PCI Interrupt 0000:00:1a.7[D] -> GSI 21 (level, low) -> IRQ 225
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 225, io mem 0x96705c00
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 233, io mem 0x96705800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 8 ports detected
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 50
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 50, io base 0x000050e0
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 225
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 225, io base 0x000050c0
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 233, io base 0x000050a0
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 2-4: new high speed USB device using ehci_hcd and address 2
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 58
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 58, io base 0x00005080
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    usb 2-4: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:00:1d.2[D] -> GSI 20 (level, low) -> IRQ 50
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 50, io base 0x00005060
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[C] -> GSI 18 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.3: irq 185, io base 0x00005040
    usb usb8: configuration #1 chosen from 1 choice
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    usb 4-2: new full speed USB device using uhci_hcd and address 2
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 58
    usb 4-2: configuration #1 chosen from 1 choice
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
    input: SynPS/2 Synaptics TouchPad as /class/input/input1
    ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems 
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m2048@0x96705000 port 0x96705100 irq 66
    ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed
    ata3: DUMMY
    ata4: DUMMY
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-8: TOSHIBA MK2555GSX, FG001J, max UDMA/100
    ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/100
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ATAPI: Slimtype DVD A  DS8A4SH, CA11, max UDMA/100, ATAPI AN
    ata2.00: configured for UDMA/100
      Vendor: ATA       Model: TOSHIBA MK2555GS  Rev: FG00
      Type:   Direct-Access                      ANSI SCSI revision: 05
    SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
     sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    sd 0:0:0:0: Attached scsi disk sda
      Vendor: Slimtype  Model: DVD A  DS8A4SH    Rev: CA11
      Type:   CD-ROM                             ANSI SCSI revision: 05
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
    device-mapper: dm-raid45: initialized v0.2594l
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    type=1404 audit(1269114564.946:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
    security:  3 users, 6 roles, 1871 types, 242 bools, 1 sens, 1024 cats
    security:  61 classes, 69981 rules
    SELinux:  Completing initialization.
    SELinux:  Setting up existing superblocks.
    SELinux: initialized (dev sda5, type ext3), uses xattr
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    type=1403 audit(1269114565.255:3): policy loaded auid=4294967295 ses=4294967295
    ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 185
    input: PC Speaker as /class/input/input2
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044)
    input: CNF7017 as /class/input/input3
    usbcore: registered new driver uvcvideo
    USB Video Class driver (v0.1.0)
    sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 74
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    input: HDA Digital PCBeep as /class/input/input4
    floppy0: no floppy controllers found
    lp: driver loaded but no devices found
    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ACPI: Lid Switch [LID0]
    ACPI: Sleep Button (CM) [SLPB]
    input: Video Bus as /class/input/input5
    ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    input: Video Bus as /class/input/input6
    ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    device-mapper: multipath: version 1.0.5 loaded
    EXT3 FS on sda5, internal journal
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
    Loading iSCSI transport class v2.0-871.
    802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
    iscsi: registered transport (cxgb3i)
    Broadcom NetXtreme II CNIC Driver cnic v2.0.0 (March 21, 2009)
    Broadcom NetXtreme II iSCSI Driver bnx2i v2.0.1e (June 22, 2009)
    iscsi: registered transport (bnx2i)
    iscsi: registered transport (tcp)
    iscsi: registered transport (iser)
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
    SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    Bluetooth: Core ver 2.10
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.8
    Bluetooth: HIDP (Human Interface Emulation) ver 1.1
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    Bridge firewalling registered
    [drm] Initialized drm 1.0.1 20051102
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
    [drm] Initialized i915 1.8.0 20060929 on minor 0
    virbr0: no IPv6 routers present
    set status page addr 0x03fff000
    usb 1-1: new high speed USB device using ehci_hcd and address 3
    usb 1-1: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi4 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
      Vendor: Ut163     Model: USB2FlashStorage  Rev: 0.00
      Type:   Direct-Access                      ANSI SCSI revision: 02
    SCSI device sdb: 7897087 512-byte hdwr sectors (4043 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 00 00 00
    sdb: assuming drive cache: write through
    SCSI device sdb: 7897087 512-byte hdwr sectors (4043 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 00 00 00
    sdb: assuming drive cache: write through
     sdb: sdb1
    sd 4:0:0:0: Attached scsi removable disk sdb
    sd 4:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
    usb 2-5: new high speed USB device using ehci_hcd and address 3
    usb 2-5: configuration #1 chosen from 1 choice
    scsi5 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    usb 2-5: USB disconnect, address 3
    usb 2-5: new high speed USB device using ehci_hcd and address 4
    usb 2-5: configuration #1 chosen from 1 choice
    scsi6 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 4
    usb-storage: waiting for device to settle before scanning
      Vendor: Generic-  Model: Multi-Card        Rev: 1.00
      Type:   Direct-Access                      ANSI SCSI revision: 00
    sd 6:0:0:0: Attached scsi removable disk sdc
    sd 6:0:0:0: Attached scsi generic sg3 type 0
    usb-storage: device scan complete
    Code:
    uname -rm
    
    2.6.18-164.el5 i686
    Last edited by waterhead; 03-21-2010 at 12:42 PM. Reason: Fixed [/code] tags

  4. $spacer_open
    $spacer_close
  5. #14
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    CentOS is basically a clone of RHEL, except there are CentOS repositories that you can access. So it won't be EXACTLY like RHEL.

    The lspci -vnn command isn't showing the info that it should. Try this:
    Code:
    /sbin/lspci -k
    You can check which options your version of lspci can use, just by using the --help
    option
    Code:
    lspci --help
    Also, your 'code' tags on the last post are broke. I would have fixed them, but then I would be depriving you of the opportunity to learn! lol
    Please do not send Private Messages to me with requests for help. I will not reply.

  6. #15
    Just Joined!
    Join Date
    Mar 2010
    Posts
    15
    yes, what was the problem waterhead? the first one is good but the later are broken... i didnot get it....and one more thing about my linux... can you first try to fix my Wired LAN network?? i am tired of trying the things you said on RHEL and now CentOS, again restarting PC and again logging to window for internet ( check for something ) and again going back to linux.... i think wired network should work properly, isnt it??

    if wired network will work fine then it will be easier for me to do stuffs......

    for that what should i do??is my previous information sufficient or not?? if not what else should i post..and for your last post i will reply later because i am using windows....

  7. #16
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    You don't have the LAN working in RHEL yet? Both reed9 and me already told you what you need to get that working. Look back a few posts.

    It uses the atl1c driver, which you can download from the ElRepo web site. I don't know if you can use the exact same .rpm on CentOS. There may be a better way to get it running there.

    EDIT: It appears that the ELRepo repository can indeed also be used by CentOS. So the same .rpm file can be installed on both distros.
    Last edited by waterhead; 03-21-2010 at 12:46 PM.
    Please do not send Private Messages to me with requests for help. I will not reply.

  8. #17
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    As for the lspci command. Different Linux distros may use different versions of a program. RHEL is not the most up-to-date distro, so don't expect it to have the latest-and-greatest of anything.
    Please do not send Private Messages to me with requests for help. I will not reply.

  9. #18
    Just Joined!
    Join Date
    Mar 2010
    Posts
    15
    yes i tried all the stuffs i saw in this thread...
    but all needed some dependencies, i tried to install all of them, but again it didnot get install....

    but i will again try all the things again, and will post my result in a week, because i have to prepare for my exam so may be i will work on it after my exam finishes... ..

  10. #19
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    When you try to install the driver .rpm, what errors do you get? please post all of the messages, so we can help.

    It appears that you need this driver:

    http://elrepo.org/linux/elrepo/el5/i...lrepo.i686.rpm

    You would install it with this command, after gaining root privileges with the su command:
    Code:
    rpm -ivh kmod-atl1c-1.0.0.11-1.el5.elrepo.i686.rpm
    Any needed dependencies can be downloaded to the same folder, and installed at the same time. You just need to know what those dependencies are.

    Edit: Any needed dependencies should be on the Installation DVD. If you didn't use the DVD to install, you should. Not having an internet connection means you will have to install things from the DVD. The CD versions don't have all of the programs that the DVD versions do.
    Last edited by waterhead; 03-21-2010 at 01:50 PM.
    Please do not send Private Messages to me with requests for help. I will not reply.

  11. #20
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    I just downloaded and unpacked the atl1c driver, on my Ubuntu machine. It contains a kernel module for this kernel:

    2.6.18-164.el5

    Which is the exact same kernel that you reported to have. There should be few problems encountered in installing it

    If all else fails, you can download the source rpm file from ELRepo. When unpacked, it contains the driver source, which you then can manually compile. You will need to install a few programs before you will be able to compile a kernel module.

    kernel-headers
    kernel-devel
    gcc
    make
    rpm2cpio

    All should be available on the DVD.

    You would unpack it with this command:
    Code:
    rpm2cpio atl1c-kmod-1.0.0.11-1.el5.elrepo.src.rpm | cpio -dimv
    The unpacked .rpm.src will contain this file:

    atl1c-1.0.0.11.tar.bz2

    This is the driver source, which when unpacked, can be compiled.

    Good luck on your exams.
    Please do not send Private Messages to me with requests for help. I will not reply.

Page 2 of 4 FirstFirst 1 2 3 4 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •