Find the answer to your Linux question:
Results 1 to 8 of 8
Hello. Trying to work with a fresh install of Ubuntu 9.10. I am new to linux, coming from the world of windows and this is just frustrating. I cannot get ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Mar 2010
    Posts
    5

    Dell Inspiron 1525 - Wireless not working


    Hello.

    Trying to work with a fresh install of Ubuntu 9.10. I am new to linux, coming from the world of windows and this is just frustrating.

    I cannot get the wireless to work at all. Any help is, of course, appreciated!

    Thanks.

    Code:
    ============ lspci ============
    00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
    	Kernel driver in use: agpgart-intel
    	Kernel modules: intel-agp
    00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
    	Kernel driver in use: i915
    	Kernel modules: i915
    00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
    00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
    	Kernel driver in use: uhci_hcd
    00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
    	Kernel driver in use: uhci_hcd
    00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
    	Kernel driver in use: ehci_hcd
    00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
    	Kernel driver in use: HDA Intel
    	Kernel modules: snd-hda-intel
    00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
    	Kernel driver in use: pcieport-driver
    	Kernel modules: shpchp
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
    	Kernel driver in use: uhci_hcd
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
    	Kernel driver in use: uhci_hcd
    00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
    	Kernel driver in use: uhci_hcd
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
    	Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2)
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
    	Kernel modules: iTCO_wdt
    00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02)
    	Kernel driver in use: ata_piix
    00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02)
    	Kernel driver in use: ahci
    00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
    	Kernel modules: i2c-i801
    02:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
    	Kernel driver in use: ohci1394
    	Kernel modules: firewire-ohci, ohci1394
    02:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
    	Kernel driver in use: sdhci-pci
    	Kernel modules: sdhci-pci
    02:09.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
    02:09.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
    09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
    	Kernel driver in use: sky2
    	Kernel modules: sky2
    0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
    	Kernel driver in use: b43-pci-bridge
    	Kernel modules: ssb
    
    ============ lsusb ============
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 002: ID 0461:4d22 Primax Electronics, Ltd 
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    
    ============ lsmod ============
    Module                  Size  Used by
    cbc                     3516  237 
    aes_i586                8124  238 
    aes_generic            27484  1 aes_i586
    ecb                     2524  1 
    binfmt_misc             8356  1 
    dm_crypt               12928  0 
    ppdev                   6688  0 
    snd_hda_codec_idt      59876  1 
    snd_hda_codec_intelhdmi    12860  1 
    snd_hda_intel          26920  2 
    snd_hda_codec          75708  3 snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_intel
    snd_hwdep               7200  1 snd_hda_codec
    snd_pcm_oss            37920  0 
    snd_mixer_oss          16028  1 snd_pcm_oss
    snd_pcm                75296  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    snd_seq_dummy           2656  0 
    snd_seq_oss            28576  0 
    snd_seq_midi            6464  0 
    snd_rawmidi            22176  1 snd_seq_midi
    snd_seq_midi_event      6940  2 snd_seq_oss,snd_seq_midi
    snd_seq                50224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    snd_timer              22276  2 snd_pcm,snd_seq
    snd_seq_device          6920  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    joydev                 10240  0 
    snd                    59204  17 snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    b43                   122200  0 
    iptable_filter          3100  0 
    sdhci_pci               7100  0 
    soundcore               7264  1 snd
    mac80211              181140  1 b43
    dell_wmi                2564  0 
    psmouse                56500  0 
    snd_page_alloc          9156  2 snd_hda_intel,snd_pcm
    ip_tables              11692  1 iptable_filter
    dell_laptop             8128  0 
    sdhci                  17504  1 sdhci_pci
    lp                      8964  0 
    x_tables               16544  1 ip_tables
    parport                35340  2 ppdev,lp
    cfg80211               93052  2 b43,mac80211
    serio_raw               5280  0 
    dcdbas                  7292  1 dell_laptop
    led_class               4096  2 b43,sdhci
    fbcon                  36640  72 
    tileblit                2460  1 fbcon
    font                    8124  1 fbcon
    bitblit                 5372  1 fbcon
    softcursor              1756  1 bitblit
    usbhid                 38208  0 
    ohci1394               29900  0 
    i915                  226120  3 
    drm                   160032  3 i915
    i2c_algo_bit            5760  1 i915
    ieee1394               86596  1 ohci1394
    intel_agp              27676  2 i915
    agpgart                34988  2 drm,intel_agp
    ssb                    35524  1 b43
    sky2                   46560  0 
    video                  19380  1 i915
    output                  2780  1 video
    
    ============ dmesg-firmware ============
    
    ============ kernel version ============
    2.6.31-20-generic
    
    ============ ifconfig ============
    eth0      Link encap:Ethernet  HWaddr 00:21:9b:ef:1b:fb  
              inet addr:192.168.1.139  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::221:9bff:feef:1bfb/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:5778 errors:0 dropped:0 overruns:0 frame:0
              TX packets:2911 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:2826126 (2.8 MB)  TX bytes:440075 (440.0 KB)
              Interrupt:16 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:240 (240.0 B)  TX bytes:240 (240.0 B)
    
    
    ============ iwconfig ============

  2. #2
    Just Joined!
    Join Date
    Dec 2008
    Posts
    7
    Hi, I had a similar problem with Ubuntu 8.10 and a Toshiba Satelite with an Atheros WIFI. The poblem disappeared when I update the BIOS. I would use the Network application under administration tools and see if you can even see the WIFI. The Ubuntu network tools are really very good.

    Kevin

  3. #3
    Just Joined!
    Join Date
    Mar 2010
    Posts
    5
    Thanks Kevin. It doesn't even see the wireless, just loopback and Ethernet. The weird thing, when I originally tried loading Ubuntu from the CD, it would give a notice about the proprietary drivers and I could activate them. But the install doesn't see the wireless at all it seems.

  4. $spacer_open
    $spacer_close
  5. #4
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
    Kernel driver in use: b43-pci-bridge
    Kernel modules: ssb
    This is your wireless card. You need the broadcom wl driver. It should be available through Ubuntu's driver manager, but otherwise do
    Code:
    sudo apt-get install bcmwl-kernel-source
    That assumes you have a working ethernet connection. If not, you'll have to download the packages to a flash drive, transfer them to your Ubuntu box, and install.

    Links to the packages are in this thread.

  6. #5
    Just Joined!
    Join Date
    Mar 2010
    Posts
    5
    Thanks.

    This almost worked. The wireless is now activate and I can see networks. However...the laptop now completely locks up!! And when restarted, the wireless is now longer active.

  7. #6
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    Can you describe "locks up" more? You restarted and the wireless was no longer active, but the machine didn't lock up?

    Can you post the output of
    Code:
    lsmod
    dmesg
    dmesg will be quite long, you might want to redirect to a text file for easier handling.
    Code:
    dmesg > dmesg.txt
    And use code tags when posting.

  8. #7
    Just Joined!
    Join Date
    Mar 2010
    Posts
    5
    Ak! Forgive me, I should have been more clear and realized it after I posted.

    The laptop becomes completely unresponsive. I have to manually kill the power. When I boot back into Ubuntu, the wireless is no longer active.

    I'll post the output of dmesg in a just a bit.

    I should also mention this is a dual boot setup, with Vista . The wireless is active in windows.

  9. #8
    Just Joined!
    Join Date
    Mar 2010
    Posts
    5
    This is crazy. I just booted up and now the wireless is working!! I went ahead and posted the information requested.

    Thanks you for your patience with me, and for your help.

    lsmod
    Code:
    Module                  Size  Used by
    nls_iso8859_1           3740  1 
    nls_cp437               5372  1 
    vfat                   10716  1 
    fat                    51452  1 vfat
    cbc                     3516  725 
    aes_i586                8124  726 
    aes_generic            27484  1 aes_i586
    ecb                     2524  1 
    binfmt_misc             8356  1 
    ppdev                   6688  0 
    dm_crypt               12928  0 
    joydev                 10240  0 
    snd_hda_codec_idt      59876  1 
    snd_hda_codec_intelhdmi    12860  1 
    lib80211_crypt_tkip     8636  0 
    snd_hda_intel          26920  2 
    snd_hda_codec          75708  3 snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_intel
    snd_hwdep               7200  1 snd_hda_codec
    snd_pcm_oss            37920  0 
    snd_mixer_oss          16028  1 snd_pcm_oss
    snd_pcm                75296  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    snd_seq_dummy           2656  0 
    snd_seq_oss            28576  0 
    wl                   1272936  0 
    lib80211                6432  2 lib80211_crypt_tkip,wl
    snd_seq_midi            6464  0 
    iptable_filter          3100  0 
    snd_rawmidi            22176  1 snd_seq_midi
    ip_tables              11692  1 iptable_filter
    x_tables               16544  1 ip_tables
    snd_seq_midi_event      6940  2 snd_seq_oss,snd_seq_midi
    dell_wmi                2564  0 
    snd_seq                50224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    snd_timer              22276  2 snd_pcm,snd_seq
    snd_seq_device          6920  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    dell_laptop             8128  0 
    dcdbas                  7292  1 dell_laptop
    psmouse                56500  0 
    serio_raw               5280  0 
    ricoh_mmc               3676  0 
    sdhci_pci               7100  0 
    sdhci                  17504  1 sdhci_pci
    led_class               4096  1 sdhci
    snd                    59204  17 snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    soundcore               7264  1 snd
    snd_page_alloc          9156  2 snd_hda_intel,snd_pcm
    lp                      8964  0 
    parport                35340  2 ppdev,lp
    fbcon                  36640  72 
    tileblit                2460  1 fbcon
    font                    8124  1 fbcon
    bitblit                 5372  1 fbcon
    softcursor              1756  1 bitblit
    usb_storage            52768  1 
    usbhid                 38208  0 
    i915                  226120  3 
    drm                   160032  3 i915
    i2c_algo_bit            5760  1 i915
    ohci1394               29900  0 
    sky2                   46560  0 
    ieee1394               86596  1 ohci1394
    intel_agp              27676  2 i915
    agpgart                34988  2 drm,intel_agp
    video                  19380  1 i915
    output                  2780  1 video
    dmesg
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.31-20-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #57-Ubuntu SMP Mon Feb 8 09:05:19 UTC 2010 (Ubuntu 2.6.31-20.57-generic)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf66d800 (usable)
    [    0.000000]  BIOS-e820: 00000000bf66d800 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
    [    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [    0.000000] DMI 2.4 present.
    [    0.000000] last_pfn = 0xbf66d max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask F80000000 write-back
    [    0.000000]   1 base 080000000 mask FC0000000 write-back
    [    0.000000]   2 base 0BF800000 mask FFF800000 uncachable
    [    0.000000]   3 base 0BF700000 mask FFFF00000 uncachable
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
    [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
    [    0.000000]  modified: 0000000000006000 - 000000000009f000 (usable)
    [    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 00000000bf66d800 (usable)
    [    0.000000]  modified: 00000000bf66d800 - 00000000c0000000 (reserved)
    [    0.000000]  modified: 00000000f8000000 - 00000000fc000000 (reserved)
    [    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
    [    0.000000]  modified: 00000000fed18000 - 00000000fed1c000 (reserved)
    [    0.000000]  modified: 00000000fed20000 - 00000000fed90000 (reserved)
    [    0.000000]  modified: 00000000feda0000 - 00000000feda6000 (reserved)
    [    0.000000]  modified: 00000000fee00000 - 00000000fee10000 (reserved)
    [    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
    [    0.000000] initial memory mapped : 0 - 00c00000
    [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [    0.000000] Using x86 segment limits to approximate NX protection
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 0037400000 page 2M
    [    0.000000]  0037400000 - 00377fe000 page 4k
    [    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
    [    0.000000] RAMDISK: 37850000 - 37fefdc1
    [    0.000000] Allocated new RAMDISK: 008b2000 - 01051dc1
    [    0.000000] Move RAMDISK from 0000000037850000 - 0000000037fefdc0 to 008b2000 - 01051dc0
    [    0.000000] ACPI: RSDP 000fbc60 00024 (v02 DELL  )
    [    0.000000] ACPI: XSDT bf66f200 00064 (v01 DELL    M08     27D8061B ASL  00000061)
    [    0.000000] ACPI: FACP bf66f09c 000F4 (v04 DELL    M08     27D8061B ASL  00000061)
    [    0.000000] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
    [    0.000000] ACPI: FACS bf67e000 00040
    [    0.000000] ACPI: HPET bf66f300 00038 (v01 DELL    M08     00000001 ASL  00000061)
    [    0.000000] ACPI: APIC bf66f400 00068 (v01 DELL    M08     27D8061B ASL  00000047)
    [    0.000000] ACPI: MCFG bf66f3c0 0003E (v16 DELL    M08     27D8061B ASL  00000061)
    [    0.000000] ACPI: SLIC bf66f49c 00176 (v01 DELL    M08     27D8061B ASL  00000061)
    [    0.000000] ACPI: OSFR bf66ea00 0008A (v01 DELL    M08     27D8061B ASL  00000061)
    [    0.000000] ACPI: BOOT bf66efc0 00028 (v01 DELL    M08     27D8061B ASL  00000061)
    [    0.000000] ACPI: SSDT bf66d9c0 004CC (v01  PmRef    CpuPm 00003000 INTL 20050624)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 2174MB HIGHMEM available.
    [    0.000000] 887MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 377fe000
    [    0.000000]   low ram: 0 - 377fe000
    [    0.000000]   node 0 low ram: 00000000 - 377fe000
    [    0.000000]   node 0 bootmap 00008000 - 0000ef00
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 00008ad060]    TEXT DATA BSS ==> [0000100000 - 00008ad060]
    [    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
    [    0.000000]   #5 [00008ae000 - 00008b1184]              BRK ==> [00008ae000 - 00008b1184]
    [    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
    [    0.000000]   #7 [00008b2000 - 0001051dc1]      NEW RAMDISK ==> [00008b2000 - 0001051dc1]
    [    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x000377fe
    [    0.000000]   HighMem  0x000377fe -> 0x000bf66d
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x00000002
    [    0.000000]     0: 0x00000006 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x000bf66d
    [    0.000000] On node 0 totalpages: 783880
    [    0.000000] free_area_init_node: node 0, pgdat c0788920, node_mem_map c1052000
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1744 pages used for memmap
    [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 4349 pages used for memmap
    [    0.000000]   HighMem zone: 552306 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x1008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages at c2852000, static data 35612 bytes
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 777755
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=f5f786fc-85c6-407d-9490-95070a65cc7b ro quiet splash
    [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 15679620 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (000377fe:000bf66d)
    [    0.000000] Memory: 3078092k/3135924k available (4579k kernel code, 56512k reserved, 2145k data, 540k init, 2226620k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
    [    0.000000]       .init : 0xc0792000 - 0xc0819000   ( 540 kB)
    [    0.000000]       .data : 0xc0578c68 - 0xc0791448   (2145 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc0578c68   (4579 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] NR_IRQS:2304 nr_irqs:424
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 1861.958 MHz processor.
    [    0.001562] Console: colour VGA+ 80x25
    [    0.001566] console [tty0] enabled
    [    0.001748] hpet clockevent registered
    [    0.001751] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.001758] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.91 BogoMIPS (lpj=7447832)
    [    0.001780] Security Framework initialized
    [    0.001803] AppArmor: AppArmor initialized
    [    0.001811] Mount-cache hash table entries: 512
    [    0.001958] Initializing cgroup subsys ns
    [    0.001964] Initializing cgroup subsys cpuacct
    [    0.001968] Initializing cgroup subsys memory
    [    0.001976] Initializing cgroup subsys freezer
    [    0.001978] Initializing cgroup subsys net_cls
    [    0.001994] CPU: L1 I cache: 32K, L1 D cache: 32K
    [    0.001997] CPU: L2 cache: 1024K
    [    0.002001] CPU: Physical Processor ID: 0
    [    0.002002] CPU: Processor Core ID: 0
    [    0.002006] mce: CPU supports 6 MCE banks
    [    0.002015] CPU0: Thermal monitoring enabled (TM2)
    [    0.002019] using mwait in idle threads.
    [    0.002027] Performance Counters: Core2 events, Intel PMU driver.
    [    0.002037] ... version:                 2
    [    0.002039] ... bit width:               40
    [    0.002041] ... generic counters:        2
    [    0.002043] ... value mask:              000000ffffffffff
    [    0.002045] ... max period:              000000007fffffff
    [    0.002047] ... fixed-purpose counters:  3
    [    0.002048] ... counter mask:            0000000700000003
    [    0.002053] Checking 'hlt' instruction... OK.
    [    0.018773] ACPI: Core revision 20090521
    [    0.028456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.071117] CPU0: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
    [    0.072001] Booting processor 1 APIC 0x1 ip 0x6000
    [    0.004000] Initializing CPU#1
    [    0.004000] Calibrating delay using timer specific routine.. 3723.94 BogoMIPS (lpj=7447888)
    [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
    [    0.004000] CPU: L2 cache: 1024K
    [    0.004000] CPU: Physical Processor ID: 0
    [    0.004000] CPU: Processor Core ID: 1
    [    0.004000] mce: CPU supports 6 MCE banks
    [    0.004000] CPU1: Thermal monitoring enabled (TM2)
    [    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    [    0.157550] CPU1: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
    [    0.157566] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [    0.160026] Brought up 2 CPUs
    [    0.160029] Total of 2 processors activated (7447.86 BogoMIPS).
    [    0.160084] CPU0 attaching sched-domain:
    [    0.160088]  domain 0: span 0-1 level MC
    [    0.160090]   groups: 0 1
    [    0.160097] CPU1 attaching sched-domain:
    [    0.160099]  domain 0: span 0-1 level MC
    [    0.160102]   groups: 1 0
    [    0.160185] Booting paravirtualized kernel on bare hardware
    [    0.160228] regulator: core version 0.5
    [    0.160228] Time: 12:53:39  Date: 03/17/10
    [    0.160228] NET: Registered protocol family 16
    [    0.160233] EISA bus registered
    [    0.160244] ACPI: bus type pci registered
    [    0.160320] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
    [    0.160323] PCI: MCFG area at f8000000 reserved in E820
    [    0.160325] PCI: Using MMCONFIG for extended config space
    [    0.160328] PCI: Using configuration type 1 for base access
    [    0.161447] bio: create slab <bio-0> at 0
    [    0.164683] ACPI: EC: Look up EC in DSDT
    [    0.190460] ACPI: Interpreter enabled
    [    0.190467] ACPI: (supports S0 S3 S4 S5)
    [    0.190488] ACPI: Using IOAPIC for interrupt routing
    [    0.235461] ACPI: No dock devices found.
    [    0.254526] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.254648] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
    [    0.254658] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
    [    0.254664] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff]
    [    0.254718] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
    [    0.254856] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
    [    0.254934] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
    [    0.255021] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
    [    0.255097] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.255104] pci 0000:00:1a.7: PME# disabled
    [    0.255169] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
    [    0.255244] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.255249] pci 0000:00:1b.0: PME# disabled
    [    0.255354] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.255360] pci 0000:00:1c.0: PME# disabled
    [    0.255469] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.255474] pci 0000:00:1c.1: PME# disabled
    [    0.255586] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [    0.255592] pci 0000:00:1c.4: PME# disabled
    [    0.255671] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
    [    0.255749] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
    [    0.255830] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
    [    0.255914] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
    [    0.255991] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.256007] pci 0000:00:1d.7: PME# disabled
    [    0.256206] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    [    0.256211] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
    [    0.256216] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
    [    0.256221] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007)
    [    0.256226] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
    [    0.256290] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
    [    0.256299] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
    [    0.256309] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
    [    0.256318] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
    [    0.256328] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
    [    0.256417] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
    [    0.256427] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
    [    0.256436] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
    [    0.256445] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
    [    0.256455] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
    [    0.256465] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff]
    [    0.256516] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.256522] pci 0000:00:1f.2: PME# disabled
    [    0.256562] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff]
    [    0.256592] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
    [    0.256714] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
    [    0.256727] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff]
    [    0.256827] pci 0000:09:00.0: supports D1 D2
    [    0.256829] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.256837] pci 0000:09:00.0: PME# disabled
    [    0.256929] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
    [    0.256935] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
    [    0.257159] pci 0000:0b:00.0: reg 10 64bit mmio: [0xfe7fc000-0xfe7fffff]
    [    0.257392] pci 0000:0b:00.0: supports D1 D2
    [    0.257394] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
    [    0.257406] pci 0000:0b:00.0: PME# disabled
    [    0.257560] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
    [    0.257639] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
    [    0.257646] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff]
    [    0.257655] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
    [    0.257728] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff]
    [    0.257800] pci 0000:02:09.0: supports D1 D2
    [    0.257802] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.257808] pci 0000:02:09.0: PME# disabled
    [    0.257861] pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff400-0xfe3ff4ff]
    [    0.257931] pci 0000:02:09.1: supports D1 D2
    [    0.257933] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.257939] pci 0000:02:09.1: PME# disabled
    [    0.257990] pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff]
    [    0.258062] pci 0000:02:09.2: supports D1 D2
    [    0.258064] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.258070] pci 0000:02:09.2: PME# disabled
    [    0.258122] pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff]
    [    0.258193] pci 0000:02:09.3: supports D1 D2
    [    0.258195] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.258201] pci 0000:02:09.3: PME# disabled
    [    0.258251] pci 0000:02:09.4: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff]
    [    0.258323] pci 0000:02:09.4: supports D1 D2
    [    0.258325] pci 0000:02:09.4: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.258331] pci 0000:02:09.4: PME# disabled
    [    0.258394] pci 0000:00:1e.0: transparent bridge
    [    0.258403] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff]
    [    0.258443] pci_bus 0000:00: on NUMA node 0
    [    0.258448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.258735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    [    0.258874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [    0.258955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [    0.259041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [    0.271814] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
    [    0.271945] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
    [    0.272085] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
    [    0.272198] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
    [    0.272328] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [    0.272460] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.272592] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
    [    0.272708] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.272922] SCSI subsystem initialized
    [    0.272958] libata version 3.00 loaded.
    [    0.272958] usbcore: registered new interface driver usbfs
    [    0.272958] usbcore: registered new interface driver hub
    [    0.272958] usbcore: registered new device driver usb
    [    0.272958] ACPI: WMI: Mapper loaded
    [    0.272958] PCI: Using ACPI for IRQ routing
    [    0.284009] Bluetooth: Core ver 2.15
    [    0.284027] NET: Registered protocol family 31
    [    0.284027] Bluetooth: HCI device and connection manager initialized
    [    0.284027] Bluetooth: HCI socket layer initialized
    [    0.284027] NetLabel: Initializing
    [    0.284027] NetLabel:  domain hash size = 128
    [    0.284027] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.284037] NetLabel:  unlabeled traffic allowed by default
    [    0.284074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.284080] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.300014] pnp: PnP ACPI init
    [    0.300036] ACPI: bus type pnp registered
    [    0.320150] pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    [    0.320155] pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    [    0.320260] pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    [    0.320263] pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    [    0.320267] pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    [    0.320271] pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
    [    0.342258] pnp: PnP ACPI: found 13 devices
    [    0.342260] ACPI: ACPI bus type pnp unregistered
    [    0.342264] PnPBIOS: Disabled by ACPI PNP
    [    0.342278] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved
    [    0.342281] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved
    [    0.342290] system 00:06: ioport range 0xc80-0xcff could not be reserved
    [    0.342297] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
    [    0.342304] system 00:0a: ioport range 0x900-0x97f has been reserved
    [    0.342307] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
    [    0.342314] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
    [    0.342317] system 00:0b: ioport range 0x1080-0x10bf has been reserved
    [    0.342320] system 00:0b: ioport range 0x10c0-0x10df has been reserved
    [    0.342323] system 00:0b: ioport range 0x809-0x809 has been reserved
    [    0.342330] system 00:0c: iomem range 0x0-0x9efff could not be reserved
    [    0.342333] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
    [    0.342337] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
    [    0.342340] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
    [    0.342344] system 00:0c: iomem range 0x100000-0xbf66d7ff could not be reserved
    [    0.342347] system 00:0c: iomem range 0xbf66d800-0xbf6fffff has been reserved
    [    0.342350] system 00:0c: iomem range 0xbf700000-0xbf7fffff has been reserved
    [    0.342353] system 00:0c: iomem range 0xbf700000-0xbfefffff could not be reserved
    [    0.342357] system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved
    [    0.342360] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
    [    0.342364] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
    [    0.342367] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
    [    0.342370] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
    [    0.342380] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
    [    0.342384] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
    [    0.342387] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
    [    0.342390] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
    [    0.342393] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
    [    0.342396] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
    [    0.377095] AppArmor: AppArmor Filesystem Enabled
    [    0.377169] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09
    [    0.377173] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
    [    0.377181] pci 0000:00:1c.0:   MEM window: 0xfe800000-0xfe8fffff
    [    0.377187] pci 0000:00:1c.0:   PREFETCH window: disabled
    [    0.377192] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b
    [    0.377194] pci 0000:00:1c.1:   IO window: disabled
    [    0.377202] pci 0000:00:1c.1:   MEM window: 0xfe700000-0xfe7fffff
    [    0.377207] pci 0000:00:1c.1:   PREFETCH window: disabled
    [    0.377213] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c
    [    0.377217] pci 0000:00:1c.4:   IO window: 0xc000-0xcfff
    [    0.377225] pci 0000:00:1c.4:   MEM window: 0xfe400000-0xfe6fffff
    [    0.377231] pci 0000:00:1c.4:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
    [    0.377240] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
    [    0.377242] pci 0000:00:1e.0:   IO window: disabled
    [    0.377250] pci 0000:00:1e.0:   MEM window: 0xfe300000-0xfe3fffff
    [    0.377255] pci 0000:00:1e.0:   PREFETCH window: disabled
    [    0.377273]   alloc irq_desc for 16 on node -1
    [    0.377275]   alloc kstat_irqs on node -1
    [    0.377282] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.377289] pci 0000:00:1c.0: setting latency timer to 64
    [    0.377302]   alloc irq_desc for 17 on node -1
    [    0.377304]   alloc kstat_irqs on node -1
    [    0.377308] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.377314] pci 0000:00:1c.1: setting latency timer to 64
    [    0.377324] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.377330] pci 0000:00:1c.4: setting latency timer to 64
    [    0.377340] pci 0000:00:1e.0: setting latency timer to 64
    [    0.377345] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.377348] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [    0.377351] pci_bus 0000:09: resource 0 io:  [0xd000-0xdfff]
    [    0.377354] pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe8fffff]
    [    0.377357] pci_bus 0000:0b: resource 1 mem: [0xfe700000-0xfe7fffff]
    [    0.377360] pci_bus 0000:0c: resource 0 io:  [0xc000-0xcfff]
    [    0.377362] pci_bus 0000:0c: resource 1 mem: [0xfe400000-0xfe6fffff]
    [    0.377365] pci_bus 0000:0c: resource 2 pref mem [0xf0000000-0xf01fffff]
    [    0.377368] pci_bus 0000:02: resource 1 mem: [0xfe300000-0xfe3fffff]
    [    0.377370] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
    [    0.377373] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
    [    0.377415] NET: Registered protocol family 2
    [    0.377528] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.377891] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.378452] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.378807] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.378810] TCP reno registered
    [    0.378939] NET: Registered protocol family 1
    [    0.379019] Trying to unpack rootfs image as initramfs...
    [    0.501604] Switched to high resolution mode on CPU 1
    [    0.504003] Switched to high resolution mode on CPU 0
    [    0.591190] Freeing initrd memory: 7807k freed
    [    0.596834] Simple Boot Flag at 0x79 set to 0x1
    [    0.597042] cpufreq-nforce2: No nForce2 chipset.
    [    0.597072] Scanning for low memory corruption every 60 seconds
    [    0.597189] audit: initializing netlink socket (disabled)
    [    0.597214] type=2000 audit(1268830419.596:1): initialized
    [    0.606541] highmem bounce pool size: 64 pages
    [    0.606547] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.608171] VFS: Disk quotas dquot_6.5.2
    [    0.608242] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.608829] fuse init (API version 7.12)
    [    0.608921] msgmni has been set to 1680
    [    0.609149] alg: No test for stdrng (krng)
    [    0.609165] io scheduler noop registered
    [    0.609167] io scheduler anticipatory registered
    [    0.609169] io scheduler deadline registered
    [    0.609215] io scheduler cfq registered (default)
    [    0.609230] pci 0000:00:02.0: Boot video device
    [    0.609550]   alloc irq_desc for 24 on node -1
    [    0.609552]   alloc kstat_irqs on node -1
    [    0.609567] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
    [    0.609581] pcieport-driver 0000:00:1c.0: setting latency timer to 64
    [    0.609762]   alloc irq_desc for 25 on node -1
    [    0.609765]   alloc kstat_irqs on node -1
    [    0.609775] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
    [    0.609788] pcieport-driver 0000:00:1c.1: setting latency timer to 64
    [    0.609967]   alloc irq_desc for 26 on node -1
    [    0.609969]   alloc kstat_irqs on node -1
    [    0.609979] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
    [    0.609992] pcieport-driver 0000:00:1c.4: setting latency timer to 64
    [    0.610117] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.610225] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.610397] ACPI: AC Adapter [AC] (on-line)
    [    0.610479] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
    [    0.611156] ACPI: Lid Switch [LID]
    [    0.611206] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [    0.611213] ACPI: Power Button [PBTN]
    [    0.611258] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [    0.611261] ACPI: Sleep Button [SBTN]
    [    0.611962] ACPI: SSDT bf66e4f6 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
    [    0.612524] ACPI: SSDT bf66de8c 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
    [    0.612932] Monitor-Mwait will be used to enter C-1 state
    [    0.612963] Monitor-Mwait will be used to enter C-2 state
    [    0.612988] Monitor-Mwait will be used to enter C-3 state
    [    0.612996] Marking TSC unstable due to TSC halts in idle
    [    0.613018] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    [    0.613046] processor LNXCPU:00: registered as cooling_device0
    [    0.613050] ACPI: Processor [CPU0] (supports 8 throttling states)
    [    0.613418] ACPI: SSDT bf66e77c 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
    [    0.613763] ACPI: SSDT bf66e471 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
    [    0.614281] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    [    0.614309] processor LNXCPU:01: registered as cooling_device1
    [    0.614313] ACPI: Processor [CPU1] (supports 8 throttling states)
    [    0.616220] thermal LNXTHERM:01: registered as thermal_zone0
    [    0.616231] ACPI: Thermal Zone [THM] (44 C)
    [    0.616299] isapnp: Scanning for PnP cards...
    [    0.737652] ACPI: Battery Slot [BAT0] (battery present)
    [    0.972946] isapnp: No Plug & Play device found
    [    0.974180] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.975650] brd: module loaded
    [    0.976137] loop: module loaded
    [    0.976219] input: Macintosh mouse button emulation as /devices/virtual/input/input3
    [    0.976304] ahci 0000:00:1f.2: version 3.0
    [    0.976322] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.976363]   alloc irq_desc for 27 on node -1
    [    0.976365]   alloc kstat_irqs on node -1
    [    0.976380] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
    [    0.976459] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
    [    0.976463] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems 
    [    0.976469] ahci 0000:00:1f.2: setting latency timer to 64
    [    0.985091] scsi0 : ahci
    [    0.985202] scsi1 : ahci
    [    0.985270] scsi2 : ahci
    [    0.985516] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 27
    [    0.985519] ata2: DUMMY
    [    0.985523] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 27
    [    0.985585] ata_piix 0000:00:1f.1: version 2.13
    [    0.985597] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.985645] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    0.985732] scsi3 : ata_piix
    [    0.985799] scsi4 : ata_piix
    [    0.986443] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
    [    0.986447] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
    [    0.987444] Fixed MDIO Bus: probed
    [    0.987481] PPP generic driver version 2.4.2
    [    0.987594] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.987618]   alloc irq_desc for 22 on node -1
    [    0.987621]   alloc kstat_irqs on node -1
    [    0.987628] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    [    0.987648] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    0.987652] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    0.987685] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    0.991596] ehci_hcd 0000:00:1a.7: debug port 1
    [    0.991604] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [    0.991624] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
    [    0.995554] ata5: port disabled. ignoring.
    [    1.005015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    1.005098] usb usb1: configuration #1 chosen from 1 choice
    [    1.005128] hub 1-0:1.0: USB hub found
    [    1.005137] hub 1-0:1.0: 4 ports detected
    [    1.005199]   alloc irq_desc for 20 on node -1
    [    1.005202]   alloc kstat_irqs on node -1
    [    1.005207] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    1.005220] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    1.005224] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    1.005258] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    1.009175] ehci_hcd 0000:00:1d.7: debug port 1
    [    1.009183] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    1.009197] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
    [    1.024020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    1.024086] usb usb2: configuration #1 chosen from 1 choice
    [    1.024114] hub 2-0:1.0: USB hub found
    [    1.024121] hub 2-0:1.0: 6 ports detected
    [    1.024189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.024212] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.024250] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    1.024258] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    1.024262] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    1.024295] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    1.024324] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
    [    1.024407] usb usb3: configuration #1 chosen from 1 choice
    [    1.024434] hub 3-0:1.0: USB hub found
    [    1.024442] hub 3-0:1.0: 2 ports detected
    [    1.024495]   alloc irq_desc for 21 on node -1
    [    1.024497]   alloc kstat_irqs on node -1
    [    1.024503] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    1.024510] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    1.024514] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    1.024545] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    1.024581] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
    [    1.024665] usb usb4: configuration #1 chosen from 1 choice
    [    1.024693] hub 4-0:1.0: USB hub found
    [    1.024700] hub 4-0:1.0: 2 ports detected
    [    1.024753] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    1.024760] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    1.024764] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    1.024800] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [    1.024829] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
    [    1.024916] usb usb5: configuration #1 chosen from 1 choice
    [    1.024945] hub 5-0:1.0: USB hub found
    [    1.024952] hub 5-0:1.0: 2 ports detected
    [    1.025013] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    1.025021] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    1.025025] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    1.025055] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [    1.025085] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
    [    1.025171] usb usb6: configuration #1 chosen from 1 choice
    [    1.025204] hub 6-0:1.0: USB hub found
    [    1.025211] hub 6-0:1.0: 2 ports detected
    [    1.025258] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    [    1.025266] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    1.025270] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    1.025299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [    1.025329] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
    [    1.025422] usb usb7: configuration #1 chosen from 1 choice
    [    1.025449] hub 7-0:1.0: USB hub found
    [    1.025457] hub 7-0:1.0: 2 ports detected
    [    1.025564] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    1.041056] i8042.c: Detected active multiplexing controller, rev 1.1.
    [    1.052563] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.052570] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    1.052573] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    1.052576] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    1.052580] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    1.052653] mice: PS/2 mouse device common for all mice
    [    1.052782] rtc_cmos 00:04: RTC can wake from S4
    [    1.052818] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [    1.052854] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    1.052968] device-mapper: uevent: version 1.0.3
    [    1.053064] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    1.053132] device-mapper: multipath: version 1.1.0 loaded
    [    1.053134] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    1.053260] EISA: Probing bus 0 at eisa.0
    [    1.053268] Cannot allocate resource for EISA slot 1
    [    1.053301] EISA: Detected 0 cards.
    [    1.053457] cpuidle: using governor ladder
    [    1.053589] cpuidle: using governor menu
    [    1.054140] TCP cubic registered
    [    1.054307] NET: Registered protocol family 10
    [    1.054798] lo: Disabled Privacy Extensions
    [    1.055168] NET: Registered protocol family 17
    [    1.055188] Bluetooth: L2CAP ver 2.13
    [    1.055190] Bluetooth: L2CAP socket layer initialized
    [    1.055193] Bluetooth: SCO (Voice Link) ver 0.6
    [    1.055195] Bluetooth: SCO socket layer initialized
    [    1.055225] Bluetooth: RFCOMM TTY layer initialized
    [    1.055228] Bluetooth: RFCOMM socket layer initialized
    [    1.055230] Bluetooth: RFCOMM ver 1.11
    [    1.055826] Using IPI No-Shortcut mode
    [    1.055907] PM: Resume from disk failed.
    [    1.055920] registered taskstats version 1
    [    1.056088]   Magic number: 2:868:885
    [    1.056202] rtc_cmos 00:04: setting system clock to 2010-03-17 12:53:40 UTC (1268830420)
    [    1.056205] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.056207] EDD information not available.
    [    1.078824] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [    1.215088] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D400, max UDMA/33
    [    1.244371] ata4.00: configured for UDMA/33
    [    1.320081] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.320107] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.369930] ata1.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133
    [    1.369933] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32)
    [    1.370816] ata1.00: configured for UDMA/133
    [    1.384196] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5
    [    1.384332] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.384374] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [    1.384422] sd 0:0:0:0: [sda] Write Protect is off
    [    1.384425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.384450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.384583]  sda:
    [    1.388667] scsi 3:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D400 PQ: 0 ANSI: 5
    [    1.391492]  sda1 sda2 sda3 sda4 <
    [    1.392696] usb 2-3: new high speed USB device using ehci_hcd and address 3
    [    1.404700] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.404704] Uniform CD-ROM driver Revision: 3.20
    [    1.404799] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [    1.404848] sr 3:0:0:0: Attached scsi generic sg1 type 5
    [    1.411463]  sda5 sda6 sda7 >
    [    1.427717] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.427750] Freeing unused kernel memory: 540k freed
    [    1.428149] Write protecting the kernel text: 4580k
    [    1.428209] Write protecting the kernel read-only data: 1840k
    [    1.504050] Clocksource tsc unstable (delta = -195846267 ns)
    [    1.543845] usb 2-3: configuration #1 chosen from 1 choice
    [    1.544034] hub 2-3:1.0: USB hub found
    [    1.544249] hub 2-3:1.0: 1 port detected
    [    1.577652] Linux agpgart interface v0.103
    [    1.580626] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [    1.581080] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
    [    1.584882] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [    1.667865] sky2 driver version 1.23
    [    1.667930] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.667950] sky2 0000:09:00.0: setting latency timer to 64
    [    1.668027] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
    [    1.668150]   alloc irq_desc for 28 on node -1
    [    1.668153]   alloc kstat_irqs on node -1
    [    1.668176] sky2 0000:09:00.0: irq 28 for MSI/MSI-X
    [    1.668975] sky2 eth0: addr 00:21:9b:ef:1b:fb
    [    1.672070] ohci1394 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.697552] [drm] Initialized drm 1.1.0 20060810
    [    1.709811] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.709820] i915 0000:00:02.0: setting latency timer to 64
    [    1.712312]   alloc irq_desc for 29 on node -1
    [    1.712316]   alloc kstat_irqs on node -1
    [    1.712326] i915 0000:00:02.0: irq 29 for MSI/MSI-X
    [    1.816688] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fe3ff800-fe3fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
    [    1.874645] usb 5-1: new low speed USB device using uhci_hcd and address 2
    [    2.044977] usb 5-1: configuration #1 chosen from 1 choice
    [    2.094875] usbcore: registered new interface driver hiddev
    [    2.108144] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
    [    2.108231] generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1/input0
    [    2.108250] usbcore: registered new interface driver usbhid
    [    2.108253] usbhid: v2.6:USB HID core driver
    [    2.120256] usb 2-3.1: new high speed USB device using ehci_hcd and address 4
    [    2.232464] usb 2-3.1: configuration #1 chosen from 1 choice
    [    2.240450] Initializing USB Mass Storage driver...
    [    2.290461] scsi5 : SCSI emulation for USB Mass Storage devices
    [    2.290636] usbcore: registered new interface driver usb-storage
    [    2.290639] USB Mass Storage support registered.
    [    2.290781] usb-storage: device found at 4
    [    2.290783] usb-storage: waiting for device to settle before scanning
    [    2.689530] [drm] TV-17: set mode NTSC 480i 0
    [    2.828722] [drm] fb0: inteldrmfb frame buffer device
    [    2.844370] acpi device:31: registered as cooling_device2
    [    2.844786] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/input/input6
    [    2.844828] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
    [    2.844889] ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434
    [    2.844973] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input7
    [    2.845030] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
    [    2.845057] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [    2.927554] [drm] LVDS-8: set mode 1280x800 c
    [    3.116154] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[364fc0002d5079c1]
    [    3.266450] Console: switching to colour frame buffer device 160x50
    [    3.626210] PM: Starting manual resume from disk
    [    3.626215] PM: Resume from partition 8:5
    [    3.626217] PM: Checking hibernation image.
    [    3.626387] PM: Resume from disk failed.
    [    3.630603] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
    [    3.630608] EXT4-fs (sda7): write access will be enabled during recovery
    [    3.669159] EXT4-fs (sda7): barriers enabled
    [    4.154912] kjournald2 starting: pid 429, dev sda7:8, commit interval 5 seconds
    [    4.155049] EXT4-fs (sda7): delayed allocation enabled
    [    4.155054] EXT4-fs: file extents enabled
    [    4.160734] EXT4-fs: mballoc enabled
    [    4.160751] EXT4-fs (sda7): recovery complete
    [    4.161245] EXT4-fs (sda7): mounted filesystem with ordered data mode
    [    4.991116] type=1505 audit(1268830424.432:2): operation="profile_load" pid=458 name=/usr/share/gdm/guest-session/Xsession
    [    5.016491] type=1505 audit(1268830424.456:3): operation="profile_load" pid=459 name=/sbin/dhclient3
    [    5.017281] type=1505 audit(1268830424.460:4): operation="profile_load" pid=459 name=/usr/lib/NetworkManager/nm-dhcp-client.action
    [    5.017708] type=1505 audit(1268830424.460:5): operation="profile_load" pid=459 name=/usr/lib/connman/scripts/dhclient-script
    [    5.091601] type=1505 audit(1268830424.531:6): operation="profile_load" pid=460 name=/usr/bin/evince
    [    5.104536] type=1505 audit(1268830424.544:7): operation="profile_load" pid=460 name=/usr/bin/evince-previewer
    [    5.112104] type=1505 audit(1268830424.552:8): operation="profile_load" pid=460 name=/usr/bin/evince-thumbnailer
    [    5.139167] type=1505 audit(1268830424.580:9): operation="profile_load" pid=462 name=/usr/lib/cups/backend/cups-pdf
    [    5.140088] type=1505 audit(1268830424.580:10): operation="profile_load" pid=462 name=/usr/sbin/cupsd
    [    7.288352] usb-storage: device scan complete
    [    7.289413] scsi 5:0:0:0: Direct-Access     Corsair  Flash Voyager    1.00 PQ: 0 ANSI: 0 CCS
    [    7.289850] sd 5:0:0:0: Attached scsi generic sg2 type 0
    [    7.290895] sd 5:0:0:0: [sdb] 2002944 512-byte logical blocks: (1.02 GB/978 MiB)
    [    7.293910] sd 5:0:0:0: [sdb] Write Protect is off
    [    7.293913] sd 5:0:0:0: [sdb] Mode Sense: 00 26 00 00
    [    7.293916] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [    7.299263] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [    7.299268]  sdb: sdb1
    [    7.346888] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [    7.346892] sd 5:0:0:0: [sdb] Attached SCSI removable disk
    [   14.477838] udev: starting version 147
    [   14.480084] Adding 3148700k swap on /dev/sda5.  Priority:-1 extents:1 across:3148700k 
    [   14.647185] lp: driver loaded but no devices found
    [   14.691994] sdhci: Secure Digital Host Controller Interface driver
    [   14.691998] sdhci: Copyright(c) Pierre Ossman
    [   14.693431] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22)
    [   14.693454]   alloc irq_desc for 18 on node -1
    [   14.693456]   alloc kstat_irqs on node -1
    [   14.693465] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [   14.695545] Registered led device: mmc0::
    [   14.696583] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA
    [   14.697401] ricoh-mmc: Ricoh MMC Controller disabling driver
    [   14.697404] ricoh-mmc: Copyright(c) Philip Langdale
    [   14.697439] ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 12)
    [   14.697460] ricoh-mmc: Controller is now disabled.
    [   14.703426] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [   14.767242] input: Dell WMI hotkeys as /devices/virtual/input/input8
    [   14.789650] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   14.805248] lib80211: common routines for IEEE802.11 drivers
    [   14.805253] lib80211_crypt: registered algorithm 'NULL'
    [   14.809957] wl: module license 'MIXED/Proprietary' taints kernel.
    [   14.809962] Disabling lock debugging due to kernel taint
    [   14.812312] wl 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [   14.812327] wl 0000:0b:00.0: setting latency timer to 64
    [   14.887318] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [   14.887375] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   14.899066] lib80211_crypt: registered algorithm 'TKIP'
    [   14.899268] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9
    [   14.908078] udev: renamed network interface eth1 to eth2
    [   15.025771] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [   15.196001] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10
    [   15.220926] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11
    [   15.249321] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [   15.249416] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [   15.249479] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [   15.942282] EXT4-fs (sda7): internal journal on sda7:8
    [   16.006529] EXT4-fs (sda6): barriers enabled
    [   16.009712] kjournald2 starting: pid 921, dev sda6:8, commit interval 5 seconds
    [   16.010050] EXT4-fs (sda6): internal journal on sda6:8
    [   16.010054] EXT4-fs (sda6): delayed allocation enabled
    [   16.010058] EXT4-fs: file extents enabled
    [   16.010636] EXT4-fs: mballoc enabled
    [   16.010652] EXT4-fs (sda6): mounted filesystem with ordered data mode
    [   16.169592] sky2 eth0: enabling interface
    [   16.169811] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   16.193691] __ratelimit: 3 callbacks suppressed
    [   16.193695] type=1505 audit(1268848435.636:12): operation="profile_replace" pid=1002 name=/usr/share/gdm/guest-session/Xsession
    [   16.195791] type=1505 audit(1268848435.636:13): operation="profile_replace" pid=1003 name=/sbin/dhclient3
    [   16.196614] type=1505 audit(1268848435.636:14): operation="profile_replace" pid=1003 name=/usr/lib/NetworkManager/nm-dhcp-client.action
    [   16.197042] type=1505 audit(1268848435.640:15): operation="profile_replace" pid=1003 name=/usr/lib/connman/scripts/dhclient-script
    [   16.202155] type=1505 audit(1268848435.644:16): operation="profile_replace" pid=1004 name=/usr/bin/evince
    [   16.215135] type=1505 audit(1268848435.656:17): operation="profile_replace" pid=1004 name=/usr/bin/evince-previewer
    [   16.222700] type=1505 audit(1268848435.664:18): operation="profile_replace" pid=1004 name=/usr/bin/evince-thumbnailer
    [   16.233477] type=1505 audit(1268848435.676:19): operation="profile_replace" pid=1006 name=/usr/lib/cups/backend/cups-pdf
    [   16.234396] type=1505 audit(1268848435.676:20): operation="profile_replace" pid=1006 name=/usr/sbin/cupsd
    [   16.237284] type=1505 audit(1268848435.680:21): operation="profile_replace" pid=1007 name=/usr/sbin/tcpdump
    [   16.822001] ppdev: user-space parallel port driver
    [   17.163063] [drm] TV-17: set mode NTSC 480i 0
    [   17.332976] [drm] TV-17: set mode NTSC 480i 0
    [   17.662220] [drm] TV-17: set mode NTSC 480i 0
    [   17.833320] [drm] TV-17: set mode NTSC 480i 0
    [   18.880033] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
    [   18.880247] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   19.528470] [drm] TV-17: set mode NTSC 480i 0
    [   19.694225] [drm] TV-17: set mode NTSC 480i 0
    [   20.018659] [drm] TV-17: set mode NTSC 480i 0
    [   20.188156] [drm] TV-17: set mode NTSC 480i 0
    [   20.551811] [drm] TV-17: set mode NTSC 480i 0
    [   20.719703] [drm] TV-17: set mode NTSC 480i 0
    [   22.744043] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x102f2d00
    [   27.392071] eth2: no IPv6 routers present
    [   29.232027] eth0: no IPv6 routers present
    [   37.071376] padlock: VIA PadLock not detected.
    [   39.025822] [drm] TV-17: set mode NTSC 480i 0
    [   39.192418] [drm] TV-17: set mode NTSC 480i 0
    [   39.528687] [drm] TV-17: set mode NTSC 480i 0
    [   39.696805] [drm] TV-17: set mode NTSC 480i 0
    [   40.021627] [drm] TV-17: set mode NTSC 480i 0
    [   40.188110] [drm] TV-17: set mode NTSC 480i 0
    [   41.192426] [drm] TV-17: set mode NTSC 480i 0
    [   41.357712] [drm] TV-17: set mode NTSC 480i 0
    [  135.107597] sky2 eth0: Link is down.
    [  266.636113] CE: hpet increasing min_delta_ns to 15000 nsec

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •