Find the answer to your Linux question:
Page 3 of 6 FirstFirst 1 2 3 4 5 6 LastLast
Results 21 to 30 of 53
Code: steve@SteveWilliams:~$ lsmod Module Size Used by af_packet 15244 2 radeon 128672 2 drm 134064 3 radeon ppdev 6256 0 lp 8512 0 parport 31036 2 ppdev,lp sco 8840 2 ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #21
    Linux Newbie
    Join Date
    Sep 2007
    Posts
    112

    lsmod


    Code:
    steve@SteveWilliams:~$ lsmod
    Module                  Size  Used by
    af_packet              15244  2 
    radeon                128672  2 
    drm                   134064  3 radeon
    ppdev                   6256  0 
    lp                      8512  0 
    parport                31036  2 ppdev,lp
    sco                     8840  2 
    bridge                 40944  0 
    stp                     2108  1 bridge
    bnep                   10836  2 
    l2cap                  18516  3 bnep
    bluetooth              50144  5 sco,bnep,l2cap
    ipv6                  233976  14 
    autofs4                20960  0 
    xt_TCPMSS               3484  2 
    xt_tcpmss               1692  2 
    xt_tcpudp               2528  2 
    iptable_filter          2256  1 
    ipt_MASQUERADE          2400  2 
    iptable_nat             4300  1 
    ip_tables               9984  2 iptable_filter,iptable_nat
    nf_nat                 16476  2 ipt_MASQUERADE,iptable_nat
    x_tables               14140  6 xt_TCPMSS,xt_tcpmss,xt_tcpudp,ipt_MASQUERADE,iptable_nat,ip_tables
    nf_conntrack_ipv4      11732  3 iptable_nat,nf_nat
    nf_conntrack           59996  4 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
    nf_defrag_ipv4          1660  1 nf_conntrack_ipv4
    uinput                  6536  1 
    powernow_k8            11740  0 
    freq_table              4048  1 powernow_k8
    fuse                   47704  3 
    snd_hda_codec_realtek   175160  1 
    snd_hda_intel          22112  5 
    snd_hda_codec          56792  2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep               6268  1 snd_hda_codec
    snd_pcm_oss            32308  0 
    snd_mixer_oss          12560  2 snd_pcm_oss
    joydev                  8604  0 
    snd_pcm                63604  4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    snd_seq_dummy           2384  0 
    snd_seq_oss            25296  0 
    snd_seq_midi            5448  0 
    snd_rawmidi            18632  1 snd_seq_midi
    snd_seq_midi_event      6208  2 snd_seq_oss,snd_seq_midi
    usblp                  10328  0 
    snd_seq                42572  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    arc4                    1564  2 
    ecb                     2380  2 
    ath5k                  97408  0 
    mac80211              140688  1 ath5k
    snd_timer              17884  3 snd_pcm,snd_seq
    led_class               3708  1 ath5k
    snd_seq_device          6228  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    snd                    49676  18 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    soundcore               6500  2 snd
    snd_page_alloc          8048  2 snd_hda_intel,snd_pcm
    cfg80211               33048  2 ath5k,mac80211
    psmouse                47844  0 
    rtc_cmos                9176  0 
    k8temp                  3908  0 
    rtc_core               16108  1 rtc_cmos
    shpchp                 27360  0 
    rtc_lib                 2600  1 rtc_core
    serio_raw               4620  0 
    i2c_piix4               8452  0 
    wmi                     6364  0 
    pci_hotplug            25256  1 shpchp
    pcspkr                  2112  0 
    hwmon                   2304  1 k8temp
    evdev                   8260  22 
    video                  16476  0 
    output                  2528  1 video
    battery                 5880  0 
    button                  5760  0 
    ac                      2908  0 
    ext3                  108140  2 
    jbd                    43848  1 ext3
    ide_pci_generic         3416  0 
    atiixp                  3220  0 
    ide_core               92368  2 ide_pci_generic,atiixp
    ata_generic             4332  0 
    pata_acpi               3612  0 
    usbhid                 30048  0 
    pata_atiixp             4236  0 
    ati_agp                 6060  0 
    ahci                   27824  5 
    thermal                15100  0 
    processor              40136  3 powernow_k8,thermal
    fan                     3156  0 
    dm_mirror              12536  0 
    dm_region_hash         10496  1 dm_mirror
    dm_log                  8652  2 dm_mirror,dm_region_hash
    dm_mod                 49336  2 dm_mirror,dm_log
    steve@SteveWilliams:~$

  2. #22
    Linux Newbie
    Join Date
    Sep 2007
    Posts
    112

    WaterSheds Script ....

    Code:
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO3
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO3
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO3
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: limiting speed to PIO0
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:fe:00/00:00:00:00:00/a0 tag 0 pio 16640 in
             cdb 12 01 00 00 fe 00 00 00  00 00 00 00 00 00 00 00
             res 51/54:03:00:fe:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    ata3.00: qc timeout (cmd 0xa0)
    ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    ata3.00: irq_stat 0x40000001
    ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
             cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
             res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
    ata3.00: status: { DRDY ERR }
    ata3: hard resetting link
    ata3: softreset failed (device not ready)
    ata3: failed due to HW bug, retry pmp=0
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    ata3.00: configured for PIO0
    ata3: EH complete
    steve@SteveWilliams:~$ dmesg | grep firmware
    steve@SteveWilliams:~$ uname -r
    2.6.29.3-dream1
    steve@SteveWilliams:~$ chmod +x ~/WirelessSetup
    chmod: cannot access `/home/steve/WirelessSetup': No such file or directory
    steve@SteveWilliams:~$ ./WirelessSetup
    bash: ./WirelessSetup: No such file or directory
    steve@SteveWilliams:~$
    Sorry Water shed...

  3. #23
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    You are trying to use the wireless script?
    Code:
    steve@SteveWilliams:~$ chmod +x ~/WirelessSetup
    chmod: cannot access `/home/steve/WirelessSetup': No such file or directory
    steve@SteveWilliams:~$ ./WirelessSetup
    bash: ./WirelessSetup: No such file or directory
    Where did you save the file to? Also, learn how to use the 'code' tags to post output data.

    From what I have gathered from this thread, this appears to be a buggy alpha version of Linux. You should be looking for help at the developers' site.
    Please do not send Private Messages to me with requests for help. I will not reply.

  4. #24
    Linux Guru coopstah13's Avatar
    Join Date
    Nov 2007
    Location
    NH, USA
    Posts
    3,149
    thats why i brought it up earlier, alpha software isn't intended for general use by the public, mostly for developers and testers

  5. #25
    Linux Newbie
    Join Date
    Sep 2007
    Posts
    112
    Quote Originally Posted by waterhead View Post
    You are trying to use the wireless script?
    Yes. The one you wrote

    Where did you save the file to?
    [Root FM] > Home > WirelessSetup > File > Save> Exit> Test
    Also, learn how to use the 'code' tags to post output data.
    Done.

    From what I have gathered from this thread, this appears to be a buggy alpha version of Linux. You should be looking for help at the developers' site.
    I don't think this is an Alpha bug. Though I could be wrong. WiCD is showing as working. and does on the girls across the street.

    Either the file is not set up right, or the settings in the router are not right. Wired does not work at all.
    Last edited by SA.com; 03-20-2010 at 01:21 AM. Reason: fixed quote tag

  6. #26
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    Don't login as root. Do things as a regular user, invoking root privileges using sudo or su when needed.

    The ~/ designation means the users /home directory. Root's home isn't in the /home directory.
    Please do not send Private Messages to me with requests for help. I will not reply.

  7. #27
    Linux Newbie
    Join Date
    Sep 2007
    Posts
    112
    Quote Originally Posted by waterhead View Post
    Don't login as root. Do things as a regular user, invoking root privileges using sudo or su when needed.

    The ~/ designation means the users /home directory. Root's home isn't in the /home directory.
    Sorry. I logged in as user, Opened Root File Manager, Went to File System, Home, Created File: WirelessSetup, File Save Exit, Test.

    WirlessSetup File ScreenShot
    Last edited by SA.com; 03-20-2010 at 01:40 AM. Reason: added url tag

  8. #28
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    It looks like it is in THE /home folder, but not YOUR /home folder. For the ~/ shortcut to work it must be in YOUR home folder, which looks to be /home/steve.

    You also need to be logged in as the user 'steve'. Move the file to your home folder, with this command:
    Code:
    mv /home/WirelessSetup /home/steve
    Then you should be able to continue with the regular directions.

    I must comment on this. The trouble you are having with logging in as root, and locating and running a script, is basic Linux procedures. If you are having trouble with basic Linux commands/procedures, you should not be using a testing version of any Linux distro. These distros are meant for somewhat advanced users.

    Also, I don't use WICD much, so I can't offer much help with it. Use NetworkManager instead, if it is available. Otherwise, manually connect using wpa_supplicant.
    Please do not send Private Messages to me with requests for help. I will not reply.

  9. #29
    Linux Newbie
    Join Date
    Sep 2007
    Posts
    112

    The Result: ....

    Quote Originally Posted by waterhead View Post
    It looks like it is in THE /home folder, but not YOUR /home folder. For the ~/ shortcut to work it must be in YOUR home folder, which looks to be /home/steve.
    Done. Thanks !
    You also need to be logged in as the user 'steve'. Move the file to your home folder, with this command:
    Code:
    mv /home/WirelessSetup /home/steve
    Then you should be able to continue with the regular directions.
    Done. Thanks !
    I must comment on this. The trouble you are having with logging in as root, and locating and running a script, is basic Linux procedures. If you are having trouble with basic Linux commands/procedures, you should not be using a testing version of any Linux distro. These distros are meant for somewhat advanced users.
    I see your point. This is my chance to expand my knowledge and I am very greatful for the help. I actually use Alpha as my everyday work box and frankly, I love it.

    I wish I did this full time, but alas, I do not. I have learned to solve a few problems on my own and write them in my little "book" which is actually pretty cool & very useful too. I still have a very long way to go, I just hope you will basically love me and guide me just the same, even if I don't turn back. Developing for Linux is my dream, let's face it, Beginner Linux just ain't my bag. After this, perhaps I'll switch to Arch ? I'd rack up 20,000 posts in no time! LOL!!

    Also, I don't use WICD much, so I can't offer much help with it. Use NetworkManager instead, if it is available. Otherwise, manually connect using wpa_supplicant.
    OK. I'll check that out. & no worries, I deeply appreciate your stopping by, you've been a huge help already.

    It is my hope to learn from you.

    Thank you!

    Steve




    steve@SteveWilliams:~$ mv /home/WirelessSetup /home/steve
    mv: cannot move `/home/WirelessSetup' to `/home/steve/WirelessSetup': Permission denied
    steve@SteveWilliams:~$ su
    Password:
    root@SteveWilliams:/home/steve# mv /home/WirelessSetup /home/steve
    root@SteveWilliams:/home/steve#
    Last edited by SA.com; 03-20-2010 at 05:32 PM. Reason: added new info...| Correct Tag Error|

  10. #30
    Linux Guru
    Join Date
    Jul 2004
    Posts
    4,593
    The file may now be owned by root. You may have to change the ownership of it (as root) before you can run it as a regular user.
    Code:
    chown steve:steve /home/steve/WirelessSetup
    I understand your reasons for using this version. But you can get the same level of frustration using the latest Fedora release. But at least it is an official release, and help should be easier to find and implement.
    Please do not send Private Messages to me with requests for help. I will not reply.

Page 3 of 6 FirstFirst 1 2 3 4 5 6 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •