Find the answer to your Linux question:
Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13
Hi Everybody, I have extracted the required wireless system info and is posted below. Hope it is what is needed for you to help solve my problem getting connected via ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Just Joined!
    Join Date
    Apr 2010
    Posts
    14

    Post Broadcom wireless System info


    Hi Everybody,

    I have extracted the required wireless system info and is posted below. Hope it is what is needed for you to help solve my problem getting connected via broadcom wierless on SuSe 11.2,

    lspci
    Code:
    00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
    00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
    00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
    02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
    05:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
    pci
    Code:
    00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
    	Subsystem: Lenovo Device [17aa:386f]
    	Kernel driver in use: agpgart-intel
    00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
    	Subsystem: Lenovo Device [17aa:3870]
    00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
    	Subsystem: Lenovo Device [17aa:3870]
    00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
    	Subsystem: Lenovo Device [17aa:3bf8]
    	Kernel driver in use: HDA Intel
    00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
    	Kernel driver in use: pcieport-driver
    00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
    	Kernel driver in use: pcieport-driver
    00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02)
    	Kernel driver in use: pcieport-driver
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
    	Subsystem: Lenovo Device [17aa:3807]
    	Kernel driver in use: uhci_hcd
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
    	Subsystem: Lenovo Device [17aa:3808]
    	Kernel driver in use: uhci_hcd
    00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
    	Subsystem: Lenovo Device [17aa:3809]
    	Kernel driver in use: uhci_hcd
    00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
    	Subsystem: Lenovo Device [17aa:380a]
    	Kernel driver in use: uhci_hcd
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
    	Subsystem: Lenovo Device [17aa:380b]
    	Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
    	Subsystem: Lenovo Device [17aa:380d]
    00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02)
    	Subsystem: Lenovo Device [17aa:3810]
    	Kernel driver in use: ata_piix
    00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)
    	Subsystem: Lenovo Device [17aa:3835]
    	Kernel driver in use: ata_piix
    00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
    	Subsystem: Lenovo Device [17aa:380f]
    02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
    	Subsystem: Lenovo IdeaPad S10e [17aa:3a23]
    	Kernel driver in use: tg3
    05:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
    	Subsystem: Broadcom Corporation Device [14e4:04b5]
    	Kernel driver in use: b43-pci-bridge
    driver
    Code:
    Module                  Size  Used by
    nfs                   342064  0 
    lockd                  81228  1 nfs
    fscache                43832  1 nfs
    nfs_acl                 3264  1 nfs
    auth_rpcgss            43392  1 nfs
    sunrpc                224064  5 nfs,lockd,nfs_acl,auth_rpcgss
    af_packet              23456  2 
    ip6t_LOG                6468  6 
    xt_tcpudp               3136  2 
    xt_pkttype              1632  3 
    xt_physdev              2384  2 
    ipt_LOG                 6276  6 
    xt_limit                2692  12 
    rfcomm                 75312  4 
    sco                    20004  2 
    bridge                 63476  1 
    stp                     2532  1 bridge
    llc                     7052  2 bridge,stp
    snd_pcm_oss            51616  0 
    snd_mixer_oss          19104  1 snd_pcm_oss
    bnep                   18656  2 
    snd_seq                64784  0 
    snd_seq_device          8620  1 snd_seq
    l2cap                  43168  16 rfcomm,bnep
    edd                    10472  0 
    i915                  251464  1 
    drm                   185440  2 i915
    i2c_algo_bit            6884  1 i915
    ip6t_REJECT             5472  3 
    nf_conntrack_ipv6      22036  4 
    ip6table_raw            3008  1 
    xt_NOTRACK              1632  4 
    ipt_REJECT              3168  3 
    xt_state                2208  8 
    iptable_raw             2848  1 
    iptable_filter          3616  1 
    ip6table_mangle         4160  0 
    nf_conntrack_netbios_ns     2560  0 
    nf_conntrack_ipv4      11688  4 
    nf_conntrack           84768  5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
    nf_defrag_ipv4          2112  1 nf_conntrack_ipv4
    ip_tables              13392  2 iptable_raw,iptable_filter
    cpufreq_conservative     8396  0 
    cpufreq_userspace       3332  0 
    cpufreq_powersave       1568  0 
    acpi_cpufreq            9452  0 
    speedstep_lib           5092  0 
    ip6table_filter         3616  1 
    ip6_tables             14832  4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
    x_tables               19524  12 ip6t_LOG,xt_tcpudp,xt_pkttype,xt_physdev,ipt_LOG,xt_limit,ip6t_REJECT,xt_NOTRACK,ipt_REJECT,xt_state,ip_tables,ip6_tables
    fuse                   74332  3 
    loop                   17228  0 
    dm_mod                 84900  0 
    snd_hda_codec_realtek   233860  1 
    b43                   153436  0 
    mac80211              217528  1 b43
    cfg80211              103424  2 b43,mac80211
    snd_hda_intel          31776  2 
    snd_hda_codec          94688  2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep               8740  1 snd_hda_codec
    uvcvideo               66124  0 
    ssb                    53896  1 b43
    snd_pcm                96324  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
    btusb                  16916  2 
    videodev               39168  1 uvcvideo
    pcmcia                 39568  2 b43,ssb
    snd_timer              25960  2 snd_seq,snd_pcm
    iTCO_wdt               12164  0 
    bluetooth             103524  9 rfcomm,sco,bnep,l2cap,btusb
    joydev                 11232  0 
    pcspkr                  2784  0 
    v4l1_compat            16004  2 uvcvideo,videodev
    rfkill                 22772  3 cfg80211,bluetooth
    sg                     32884  0 
    iTCO_vendor_support     3876  1 iTCO_wdt
    video                  24600  1 i915
    intel_agp              31460  1 
    i2c_i801               12756  0 
    battery                12836  0 
    ac                      4964  0 
    button                  6608  0 
    pcmcia_core            42324  3 b43,ssb,pcmcia
    tg3                   123236  0 
    snd                    75236  14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc         10600  2 snd_hda_intel,snd_pcm
    ext4                  381512  1 
    jbd2                   96288  1 ext4
    crc16                   1952  1 ext4
    fan                     5028  0 
    processor              50576  3 acpi_cpufreq
    ide_pci_generic         4036  0 
    piix                    6760  0 
    ide_core              122540  2 ide_pci_generic,piix
    ata_generic             4836  0 
    thermal                21084  0 
    thermal_sys            18344  4 video,fan,processor,thermal
    linux-sb85:~ #
    dmesg
    Code:
    [    0.630249] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
    [    0.630296] pcieport-driver 0000:00:1c.2: setting latency timer to 64
    [    0.630659] pci-stub: invalid id string ""
    [    0.636328] Non-volatile memory driver v1.3
    [    0.636339] Linux agpgart interface v0.103
    [    0.636415] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
    [    0.637896] ata_piix 0000:00:1f.1: version 2.13
    [    0.637930]   alloc irq_desc for 19 on node 0
    [    0.637937]   alloc kstat_irqs on node 0
    [    0.637957] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.638068] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    0.638221] scsi0 : ata_piix
    [    0.638522] scsi1 : ata_piix
    [    0.640440] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    [    0.640452] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    [    0.640745] ata2: port disabled. ignoring.
    [    0.640803] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.640817] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
    [    0.791373] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    0.798585] scsi2 : ata_piix
    [    0.798785] scsi3 : ata_piix
    [    0.798912] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
    [    0.798923] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
    [    0.799156] Fixed MDIO Bus: probed
    [    0.799178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.799342]   alloc irq_desc for 23 on node 0
    [    0.799352]   alloc kstat_irqs on node 0
    [    0.799377] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.799423] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.799437] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.799517] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    0.799533] ehci_hcd 0000:00:1d.7: using broken periodic workaround
    [    0.803456] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.803471] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [    0.803510] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
    [    0.813068] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.813201] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.813222] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.813240] usb usb1: Product: EHCI Host Controller
    [    0.813256] usb usb1: Manufacturer: Linux 2.6.31.12-0.2-desktop ehci_hcd
    [    0.813274] usb usb1: SerialNumber: 0000:00:1d.7
    [    0.813666] usb usb1: configuration #1 chosen from 1 choice
    [    0.813776] hub 1-0:1.0: USB hub found
    [    0.813802] hub 1-0:1.0: 8 ports detected
    [    0.814069] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.814130] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.817093] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [    0.817118] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.817130] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.817161] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    0.817209] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    [    0.817312] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.817322] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.817331] usb usb2: Product: UHCI Host Controller
    [    0.817339] usb usb2: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd
    [    0.817347] usb usb2: SerialNumber: 0000:00:1d.0
    [    0.817582] usb usb2: configuration #1 chosen from 1 choice
    [    0.817673] hub 2-0:1.0: USB hub found
    [    0.817694] hub 2-0:1.0: 2 ports detected
    [    0.817932] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.817952] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.817962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.817992] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    0.818064] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    [    0.818162] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.818172] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.818181] usb usb3: Product: UHCI Host Controller
    [    0.818189] usb usb3: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd
    [    0.818197] usb usb3: SerialNumber: 0000:00:1d.1
    [    0.818427] usb usb3: configuration #1 chosen from 1 choice
    [    0.818516] hub 3-0:1.0: USB hub found
    [    0.818537] hub 3-0:1.0: 2 ports detected
    [    0.818773] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.818792] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.818803] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.818832] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    0.818899] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    [    0.819026] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.819036] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.819046] usb usb4: Product: UHCI Host Controller
    [    0.819053] usb usb4: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd
    [    0.819062] usb usb4: SerialNumber: 0000:00:1d.2
    [    0.819298] usb usb4: configuration #1 chosen from 1 choice
    [    0.819403] hub 4-0:1.0: USB hub found
    [    0.819427] hub 4-0:1.0: 2 ports detected
    [    0.823109] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [    0.823145] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    0.823166] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    0.823223] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    0.823334] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
    [    0.823517] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.823537] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.823555] usb usb5: Product: UHCI Host Controller
    [    0.823571] usb usb5: Manufacturer: Linux 2.6.31.12-0.2-desktop uhci_hcd
    [    0.823588] usb usb5: SerialNumber: 0000:00:1d.3
    [    0.823844] usb usb5: configuration #1 chosen from 1 choice
    [    0.823939] hub 5-0:1.0: USB hub found
    [    0.823960] hub 5-0:1.0: 2 ports detected
    [    0.824168] Initializing USB Mass Storage driver...
    [    0.824333] usbcore: registered new interface driver usb-storage
    [    0.824343] USB Mass Storage support registered.
    [    0.824492] usbcore: registered new interface driver libusual
    [    0.824535] usbcore: registered new interface driver ums-alauda
    [    0.824578] usbcore: registered new interface driver ums-cypress
    [    0.824623] usbcore: registered new interface driver ums-datafab
    [    0.824665] usbcore: registered new interface driver ums-freecom
    [    0.824716] usbcore: registered new interface driver ums-isd200
    [    0.824761] usbcore: registered new interface driver ums-jumpshot
    [    0.824804] usbcore: registered new interface driver ums-karma
    [    0.824847] usbcore: registered new interface driver ums-onetouch
    [    0.824892] usbcore: registered new interface driver ums-sddr09
    [    0.824937] usbcore: registered new interface driver ums-sddr55
    [    0.824982] usbcore: registered new interface driver ums-usbat
    [    0.825150] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    0.840802] Failed to disable AUX port, but continuing anyway... Is this a SiS?
    [    0.840812] If AUX port is really absent please use the 'i8042.noaux' option.
    [    0.878032] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.878050] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.878282] mice: PS/2 mouse device common for all mice
    [    0.881212] rtc_cmos 00:07: RTC can wake from S4
    [    0.881379] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [    0.881437] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [    0.881473] cpuidle: using governor ladder
    [    0.881480] cpuidle: using governor menu
    [    0.882513] usbcore: registered new interface driver hiddev
    [    0.882569] usbcore: registered new interface driver usbhid
    [    0.882579] usbhid: v2.6:USB HID core driver
    [    0.963615] ata3.00: ATA-8: HITACHI HTS543280L9SA00, FB1ZC43C, max UDMA/133
    [    0.963631] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    0.971162] ata3.00: configured for UDMA/133
    [    0.971510] scsi 2:0:0:0: Direct-Access     ATA      HITACHI HTS54328 FB1Z PQ: 0 ANSI: 5
    [    0.972187] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [    0.972422] sd 2:0:0:0: [sda] Write Protect is off
    [    0.972436] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    0.972549] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.062118] TCP cubic registered
    [    1.062350] NET: Registered protocol family 10
    [    1.064547] lo: Disabled Privacy Extensions
    [    1.066251] lib80211: common routines for IEEE802.11 drivers
    [    1.066263] lib80211_crypt: registered algorithm 'NULL'
    [    1.066316] Using IPI No-Shortcut mode
    [    1.066647] PM: Checking image partition /dev/disk/by-id/ata-HITACHI_HTS543280L9SA00_080924FB0132LBG40YDA-part1
    [    1.067236]  sda: sda1 sda2 sda3
    [    1.111521] sd 2:0:0:0: [sda] Attached SCSI disk
    [    1.268113] usb 1-3: new high speed USB device using ehci_hcd and address 2
    [    1.560002] usb 1-3: New USB device found, idVendor=5986, idProduct=0241
    [    1.560029] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
    [    1.560040] usb 1-3: Product: Lenovo EasyCamera
    [    1.560048] usb 1-3: Manufacturer: BISON Corporation
    [    1.560318] usb 1-3: configuration #1 chosen from 1 choice
    [    1.795475] usb 1-5: new high speed USB device using ehci_hcd and address 4
    [    1.923048] usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
    [    1.923071] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    1.923090] usb 1-5: Product: USB2.0-CRW
    [    1.923104] usb 1-5: Manufacturer: Generic
    [    1.923119] usb 1-5: SerialNumber: 20071114173400000
    [    1.923452] usb 1-5: configuration #1 chosen from 1 choice
    [    1.929809] scsi4 : SCSI emulation for USB Mass Storage devices
    [    1.930207] usb-storage: device found at 4
    [    1.930216] usb-storage: waiting for device to settle before scanning
    [    2.044218] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
    [    2.136038] usb 3-2: new full speed USB device using uhci_hcd and address 2
    [    2.145873] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input0
    [    2.184354] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    [    2.184483] PM: Resume from disk failed.
    [    2.184530] registered taskstats version 1
    [    2.184918]   Magic number: 6:383:338
    [    2.184949] tty tty59: hash matches
    [    2.191831] rtc_cmos 00:07: setting system clock to 2010-04-19 16:20:48 UTC (1271694048)
    [    2.192119] Freeing unused kernel memory: 464k freed
    [    2.192643] Write protecting the kernel text: 4724k
    [    2.192995] Write protecting the kernel read-only data: 2708k
    [    2.299253] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2150
    [    2.299276] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    2.299296] usb 3-2: Product: BCM2046 Bluetooth Device
    [    2.299312] usb 3-2: Manufacturer: Broadcom Corp
    [    2.299326] usb 3-2: SerialNumber: 002269F54E86
    [    2.299733] usb 3-2: configuration #1 chosen from 1 choice
    [    2.304734] thermal LNXTHERM:01: registered as thermal_zone0
    [    2.304770] ACPI: Thermal Zone [TZ00] (9 C)
    [    2.392232] Uniform Multi-Platform E-IDE driver
    [    2.428107] ACPI: SSDT 3f6dc69e 00245 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
    [    2.430220] ACPI: SSDT 3f6dc034 005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
    [    2.439510] Monitor-Mwait will be used to enter C-1 state
    [    2.439607] Monitor-Mwait will be used to enter C-2 state
    [    2.439688] Monitor-Mwait will be used to enter C-3 state
    [    2.439717] Marking TSC unstable due to TSC halts in idle
    [    2.439885] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    [    2.445629] processor LNXCPU:00: registered as cooling_device0
    [    2.445648] ACPI: Processor [CPU0] (supports 8 throttling states)
    [    2.447140] ACPI: SSDT 3f6dc8e3 000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
    [    2.448647] ACPI: SSDT 3f6dc619 00085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
    [    2.453529] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    [    2.453628] processor LNXCPU:01: registered as cooling_device1
    [    2.453644] ACPI: Processor [CPU1] (supports 8 throttling states)
    [    2.476712] udev: starting version 146
    [    2.933529] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
    [    2.938715] usb-storage: device scan complete
    [    2.943051] sd 4:0:0:0: [sdb] Attached SCSI removable disk
    [    3.001004] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
    [    3.001053] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
    [    3.001067] PM: Basic memory bitmaps created
    [    3.042239] PM: Basic memory bitmaps freed
    [    3.063898] PM: Starting manual resume from disk
    [    3.063909] PM: Resume from partition 8:1
    [    3.063915] PM: Checking hibernation image.
    [    3.064224] PM: Resume from disk failed.
    [    3.254463] EXT4-fs (sda2): barriers enabled
    [    3.259584] kjournald2 starting: pid 250, dev sda2:8, commit interval 5 seconds
    [    3.263694] EXT4-fs (sda2): internal journal on sda2:8
    [    3.263725] EXT4-fs (sda2): delayed allocation enabled
    [    3.263747] EXT4-fs: file extents enabled
    [    3.266645] EXT4-fs: mballoc enabled
    [    3.266692] EXT4-fs (sda2): mounted filesystem with ordered data mode
    [    5.437202] preloadtrace: systemtap: 1.0/0.142, base: f7a76000, memory: 34340+77400+13136+13600 data+text+ctx+net, probes: 34
    [    7.354372] udev: starting version 146
    [    7.668076] tg3.c:v3.99 (April 20, 2009)
    [    7.668169] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    7.668201] tg3 0000:02:00.0: setting latency timer to 64
    [    7.671143] tg3 0000:02:00.0: PME# disabled
    [    7.694295] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [    7.694472] ACPI: Power Button [PWRF]
    [    7.694709] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [    7.694852] ACPI: Power Button [PWRB]
    [    7.695106] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    [    7.695244] ACPI: Sleep Button [SLPB]
    [    7.695500] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
    [    7.702124] ACPI: Lid Switch [LID]
    [    7.720690] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    7.720711] ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef]
    [    7.721067] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [    7.732038] ACPI: AC Adapter [ACAD] (off-line)
    [    7.752890] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
    [    7.753072] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [    7.795108] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:23:8b:34:81:94
    [    7.795127] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
    [    7.795141] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
    [    7.795153] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    [    7.800602] intel_rng: FWH not detected
    [    7.800863] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
    [    7.801690] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    [    7.806495] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [    7.938297] iTCO_vendor_support: vendor-support=0
    [    7.960554] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [    7.960705] sd 4:0:0:0: Attached scsi generic sg1 type 0
    [    8.009887] input: PC Speaker as /devices/platform/pcspkr/input/input7
    [    8.073902] ACPI: Battery Slot [BAT0] (battery present)
    [    8.122490] Bluetooth: Core ver 2.15
    [    8.126899] NET: Registered protocol family 31
    [    8.126911] Bluetooth: HCI device and connection manager initialized
    [    8.126924] Bluetooth: HCI socket layer initialized
    [    8.150587] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    [    8.160091] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
    [    8.162084] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [    8.254523] Linux video capture interface: v2.00
    [    8.267601] Bluetooth: Generic Bluetooth USB driver ver 0.5
    [    8.269151] usbcore: registered new interface driver btusb
    [    8.423565] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    8.423601] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
    [    8.430817] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
    [    8.435131] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8
    [    8.435705] usbcore: registered new interface driver uvcvideo
    [    8.435725] USB Video Class driver (v0.1.0)
    [    8.462562] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
    [    8.572375]   alloc irq_desc for 22 on node 0
    [    8.572388]   alloc kstat_irqs on node 0
    [    8.572414] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [    8.572527] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [    8.604457] cfg80211: Calling CRDA to update world regulatory domain
    [    8.727626] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
    [    8.743548] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1)
    [    8.744094] b43: probe of ssb0:0 failed with error -95
    [    8.744163] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
    [    8.843290] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [    9.126538] Adding 1967952k swap on /dev/sda1.  Priority:-1 extents:1 across:1967952k 
    [    9.251471] CE: hpet increasing min_delta_ns to 15000 nsec
    [    9.860413] device-mapper: uevent: version 1.0.3
    [    9.861370] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [   10.140809] loop: module loaded
    [   10.202313] kjournald starting.  Commit interval 15 seconds
    [   10.202733] EXT3 FS on sda3, internal journal
    [   10.202761] EXT3-fs: mounted filesystem with ordered data mode.
    [   10.743722] fuse init (API version 7.12)
    [   12.163377] type=1505 audit(1271694058.478:2): operation="profile_load" pid=952 name=/bin/ping
    [   12.273965] type=1505 audit(1271694058.588:3): operation="profile_load" pid=953 name=/sbin/klogd
    [   12.487858] type=1505 audit(1271694058.802:4): operation="profile_load" pid=954 name=/sbin/syslog-ng
    [   12.702893] type=1505 audit(1271694059.017:5): operation="profile_load" pid=955 name=/sbin/syslogd
    [   12.918758] type=1505 audit(1271694059.233:6): operation="profile_load" pid=956 name=/usr/sbin/avahi-daemon
    [   13.109975] type=1505 audit(1271694059.424:7): operation="profile_load" pid=957 name=/usr/sbin/identd
    [   13.311764] type=1505 audit(1271694059.626:8): operation="profile_load" pid=958 name=/usr/sbin/mdnsd
    [   13.540686] type=1505 audit(1271694059.855:9): operation="profile_load" pid=959 name=/usr/sbin/nscd
    [   13.908839] type=1505 audit(1271694060.223:10): operation="profile_load" pid=960 name=/usr/sbin/ntpd
    [   14.120485] type=1505 audit(1271694060.435:11): operation="profile_load" pid=961 name=/usr/sbin/traceroute
    [   18.548142] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [   19.132904] powernow: This module only works with AMD K7 CPUs
    [   19.447402] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   20.553403] nf_conntrack version 0.5.0 (15823 buckets, 63292 max)
    [   25.830668] [drm] Initialized drm 1.1.0 20060810
    [   25.888909] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   25.888944] pci 0000:00:02.0: setting latency timer to 64
    [   25.898173] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [   29.606710] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    [   30.262198] Bluetooth: L2CAP ver 2.13
    [   30.262228] Bluetooth: L2CAP socket layer initialized
    [   30.391530] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   30.391563] Bluetooth: BNEP filters: protocol multicast
    [   30.609296] Bridge firewalling registered
    [   30.755728] Bluetooth: SCO (Voice Link) ver 0.6
    [   30.755758] Bluetooth: SCO socket layer initialized
    [   31.120125] Bluetooth: RFCOMM TTY layer initialized
    [   31.120167] Bluetooth: RFCOMM socket layer initialized
    [   31.120198] Bluetooth: RFCOMM ver 1.11
    [   34.686390] tg3 0000:02:00.0: PME# disabled
    [   34.686757]   alloc irq_desc for 27 on node 0
    [   34.686770]   alloc kstat_irqs on node 0
    [   34.686826] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
    [   34.808146] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   36.330129] tg3: eth0: Link is up at 100 Mbps, full duplex.
    [   36.330166] tg3: eth0: Flow control is on for TX and on for RX.
    [   36.330760] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   36.524451] NET: Registered protocol family 17
    [   47.220038] eth0: no IPv6 routers present
    [   47.343994] RPC: Registered udp transport module.
    [   47.344027] RPC: Registered tcp transport module.
    [   47.422335] Slow work thread pool: Starting up
    [   47.422554] Slow work thread pool: Ready
    [   47.422690] FS-Cache: Loaded
    [   47.543580] FS-Cache: Netfs 'nfs' registered for caching
    [  238.500055] Clocksource tsc unstable (delta = -136555841 ns)
    [ 2111.617830] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
    [ 2111.617842] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
    [ 2111.617856] PM: Basic memory bitmaps created
    [ 2113.069061] Syncing filesystems ... done.
    [ 2113.080151] Freezing user space processes ... (elapsed 0.49 seconds) done.
    [ 2113.570865] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [ 2113.571271] PM: Shrinking memory... done (90087 pages freed)
    [ 2117.248492] PM: Freed 360348 kbytes in 3.67 seconds (98.18 MB/s)
    [ 2117.248501] Suspending console(s) (use no_console_suspend to debug)
    [ 2117.250097] btusb_bulk_complete: hci0 urb f45800c0 failed to resubmit (1)
    [ 2117.250555] btusb_bulk_complete: hci0 urb f4580140 failed to resubmit (1)
    [ 2117.251530] btusb_intr_complete: hci0 urb f4580240 failed to resubmit (1)
    [ 2117.251682] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 2117.283429] ACPI handle has no context!
    [ 2117.283921] b43-pci-bridge 0000:05:00.0: PCI INT A disabled
    [ 2117.294539] pci 0000:00:1f.3: PCI INT B disabled
    [ 2117.294825] ata_piix 0000:00:1f.2: PCI INT B disabled
    [ 2117.294952] ata2: port disabled. ignoring.
    [ 2117.295098] ata_piix 0000:00:1f.1: PCI INT B disabled
    [ 2117.295152] HDA Intel 0000:00:1b.0: PCI INT A disabled
    [ 2117.306168] pci 0000:00:02.0: PCI INT A disabled
    [ 2117.307233] ACPI: Preparing to enter system sleep state S4
    [ 2117.374575] PM: Saving platform NVS memory
    [ 2117.375052] Disabling non-boot CPUs ...
    [ 2117.376190] Unmapping cpu 1 from all nodes
    [ 2117.377458] CPU 1 is now offline
    [ 2117.377469] SMP alternatives: switching to UP code
    [ 2117.388336] CPU0 attaching NULL sched-domain.
    [ 2117.388347] CPU1 attaching NULL sched-domain.
    [ 2117.388446] CPU0 attaching NULL sched-domain.
    [ 2117.389118] CPU1 is down
    [ 2117.389206] Extended CMOS year: 2000
    [ 2117.389327] PM: Creating hibernation image: 
    [ 2117.390020] PM: Need to copy 111831 pages
    [ 2117.390020] PM: Normal pages needed: 105090 + 1024 + 26, available pages: 120086
    [ 2117.390020] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 2117.390020] PM: Restoring platform NVS memory
    [ 2117.390020] CPU0: Thermal monitoring handled by SMI
    [ 2117.390020] Extended CMOS year: 2000
    [ 2117.390020] Enabling non-boot CPUs ...
    [ 2117.392451] SMP alternatives: switching to SMP code
    [ 2117.402323] Booting processor 1 APIC 0x1 ip 0x6000
    [ 2117.387651] Initializing CPU#1
    [ 2117.387651] Mapping cpu 1 to node 0
    [ 2117.387651] Calibrating delay using timer specific routine.. 3192.02 BogoMIPS (lpj=1596014)
    [ 2117.387651] CPU: L1 I cache: 32K, L1 D cache: 24K
    [ 2117.387651] CPU: L2 cache: 512K
    [ 2117.387651] CPU: Physical Processor ID: 0
    [ 2117.387651] CPU: Processor Core ID: 0
    [ 2117.387651] mce: CPU supports 5 MCE banks
    [ 2117.387651] CPU1: Thermal monitoring handled by SMI
    [ 2117.387651] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    [ 2117.474225] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
    [ 2117.474333] CPU0 attaching NULL sched-domain.
    [ 2117.475277] Switched to high resolution mode on CPU 1
    [ 2117.477209] CPU0 attaching sched-domain:
    [ 2117.477220]  domain 0: span 0-1 level SIBLING
    [ 2117.477231]   groups: 0 1
    [ 2117.477249]   domain 1: span 0-1 level NODE
    [ 2117.477258]    groups: 0-1
    [ 2117.477275] CPU1 attaching sched-domain:
    [ 2117.477285]  domain 0: span 0-1 level SIBLING
    [ 2117.477295]   groups: 1 0
    [ 2117.477312]   domain 1: span 0-1 level NODE
    [ 2117.477322]    groups: 0-1
    [ 2117.480319] CPU1 is up
    [ 2117.480356] ACPI: Waking up from system sleep state S4
    [ 2117.560329] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
    [ 2117.560454] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
    [ 2117.561118] ehci_hcd 0000:00:1d.7: PME# disabled
    [ 2117.561300] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
    [ 2117.561372] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
    [ 2117.561593] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0x80a40000)
    [ 2117.927916] pci 0000:00:02.0: PME# disabled
    [ 2117.927938] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2117.927951] pci 0000:00:02.0: setting latency timer to 64
    [ 2117.927964] pci 0000:00:02.1: PME# disabled
    [ 2117.927979] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 2117.927994] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 2117.928100] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 2117.928151] usb usb2: root hub lost power or was reset
    [ 2117.928184] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 2117.928233] usb usb3: root hub lost power or was reset
    [ 2117.928300] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 2117.928359] usb usb4: root hub lost power or was reset
    [ 2117.928391] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 2117.928440] usb usb5: root hub lost power or was reset
    [ 2117.928470] ehci_hcd 0000:00:1d.7: PME# disabled
    [ 2117.928481] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 2117.928492] usb usb1: root hub lost power or was reset
    [ 2117.932388] ehci_hcd 0000:00:1d.7: debug port 1
    [ 2117.932403] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 2117.932426] pci 0000:00:1e.0: setting latency timer to 64
    [ 2117.932452] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 2117.932465] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 2117.934794] ata2: port disabled. ignoring.
    [ 2117.934864] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 2117.934878] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 2117.935145] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 2117.935370] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 2118.105165] ata3.00: configured for UDMA/133
    [ 2118.519711] sd 2:0:0:0: [sda] Starting disk
    [ 2118.642174] usb 1-3: reset high speed USB device using ehci_hcd and address 2
    [ 2118.993179] usb 1-5: reset high speed USB device using ehci_hcd and address 4
    [ 2119.218182] usb 3-2: reset full speed USB device using uhci_hcd and address 2
    [ 2119.358180] btusb 3-2:1.0: no reset_resume for driver btusb?
    [ 2119.358199] btusb 3-2:1.1: no reset_resume for driver btusb?
    [ 2119.608720] pci 0000:00:02.0: setting latency timer to 64
    [ 2119.753771] Restarting tasks ... done.
    [ 2119.812911] PM: Basic memory bitmaps freed
    [ 2131.778417] tg3 0000:02:00.0: PME# disabled
    [ 2131.778812] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
    [ 2131.835155] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 2133.485694] tg3: eth0: Link is up at 100 Mbps, full duplex.
    [ 2133.485694] tg3: eth0: Flow control is on for TX and on for RX.
    [ 2133.487055] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 2144.189052] eth0: no IPv6 routers present
    linux distribution
    Code:
    2.6.31.12-0.2-desktop
    Seems a lot of info here but i guess it will make sense to somone?.

  2. #12
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    You do want the broadcom wl driver.

    Enable the packman repo.

    Do
    Code:
    sudo zypper install broadcom-wl broadcom-wl-kmp-desktop
    It's currently loading the b43 driver. I assume opensuse has it in the install instructions of the wl package to blacklist that driver, but if not, you may need to blacklist it manually. Try this first, you may need to restart, and if it isn't working, post lsmod and dmesg again.

  3. #13
    Just Joined!
    Join Date
    Apr 2010
    Posts
    14

    Thumbs up Success

    Hi reed9,

    Am now connected via wireless signal and all seems OK . I would like to thank you and others for assisting me in the problem and without your help would never have achieved getting connected. Regards Terry.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •