Loopback

[dpbklyn]

Hello and thank you in advance!

I am a relative newcomer to Linux. I have been futzing around for a couple months and loving it.

I am having trouble getting a wireless USB device set up on my Ubuntu install. Below is the print out you requested.

============ lspci ============
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) [8086:7192] (rev 03)
00:04.0 VGA compatible controller [0300]: Neomagic Corporation NM2200 [MagicGraph 256AV] [10c8:0005] (rev 12)
	Kernel modules: neofb
00:05.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
00:05.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
	Kernel driver in use: ata_piix
00:05.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
	Kernel driver in use: uhci_hcd
00:05.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c-piix4
00:09.0 Communication controller [0780]: Toshiba America Info Systems FIR Port Type-O [1179:0701] (rev 23)
	Kernel driver in use: donauboe
	Kernel modules: donauboe
00:0b.0 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 05)
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket
00:0b.1 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 05)
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket
00:0d.0 Multimedia controller [0480]: C-Cube Microsystems Cinemaster C 3.0 DVD Decoder [123f:8888] (rev 02)

============ lsusb ============
Bus 001 Device 008: ID 0457:0151 Silicon Integrated Systems Corp. Super Flash 1GB / GXT  64MB Flash Drive
Bus 001 Device 006: ID 0846:9030 NetGear, Inc. 
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

============ lsmod ============
Module                  Size  Used by
ndiswrapper           193436  0 
nls_iso8859_1          12032  1 
nls_cp437              13696  1 
vfat                   18816  1 
fat                    58272  1 vfat
binfmt_misc            16776  1 
ppdev                  15620  0 
bridge                 56340  0 
stp                    10500  1 bridge
bnep                   20224  2 
lp                     17156  0 
parport                42220  2 ppdev,lp
pcmcia                 44748  0 
donauboe               22144  0 
yenta_socket           32396  2 
pcspkr                 10496  0 
irda                  197180  1 donauboe
rsrc_nonstatic         19328  1 yenta_socket
pcmcia_core            43540  3 pcmcia,yenta_socket,rsrc_nonstatic
psmouse                61972  0 
serio_raw              13316  0 
crc_ccitt              10112  2 donauboe,irda
i2c_piix4              18448  0 
fbcon                  46112  0 
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
usb_storage            82880  1 

============ dmesg-firmware ============

============ kernel version ============
2.6.28-11-generic

============ ifconfig ============
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:516 (516.0 B)  TX bytes:516 (516.0 B)


============ iwconfig ============

Again, thank you in advance.

dp

[nujinini]

Hello and welcome dpbklyn!

Hope you get to make your wireless work soon. Hold on!