Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
Hi I was looking for help setting up my usb adapter on ubunutu, so I found all the info I needed with the wireless_setup script and tried to copy into ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jun 2010
    Posts
    9

    Help to set up Wireless nLite USB adapter (edimax)


    Hi

    I was looking for help setting up my usb adapter on ubunutu, so I found all the info I needed with the wireless_setup script and tried to copy into here and the forum claims I tried to use to many images, but I hadn't used any!

    Can I have some help on how to post my info and how to sort my wireless connection?

    All help much appreciated.

    Rachel

  2. #2
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Hello and Welcome.
    The problem is any signs like @, http and sometimes 8:. When you enter that text into your post, click the button that says "Disable smilies in text" and remove all @ or http. Be sure and use the code tags also.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  3. #3
    Just Joined!
    Join Date
    Jun 2010
    Posts
    9
    Thank you! Much appreciated, here I go trying again.
    Code:
    00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
    	Kernel driver in use: agpgart-intel
    	Kernel modules: intel-agp
    00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04)
    	Kernel driver in use: i915
    	Kernel modules: i915
    00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03)
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
    	Kernel driver in use: uhci_hcd
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
    	Kernel driver in use: uhci_hcd
    00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
    	Kernel driver in use: uhci_hcd
    00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
    	Kernel driver in use: uhci_hcd
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
    	Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3)
    00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
    	Kernel driver in use: Intel ICH
    	Kernel modules: snd-intel8x0
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
    	Kernel modules: iTCO_wdt, intel-rng
    00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03)
    	Kernel driver in use: ata_piix
    00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03)
    	Kernel driver in use: ata_piix
    40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
    	Kernel driver in use: tg3
    	Kernel modules: tg3
    Bus 005 Device 002: ID 04fc:05d8 Sunplus Technology Co., Ltd 
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 007: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk
    Bus 001 Device 006: ID 03f0:1807 Hewlett-Packard 
    Bus 001 Device 005: ID 046e:5577 Behavior Tech. Computer Corp. 
    Bus 001 Device 003: ID 7392:7711  
    Bus 001 Device 002: ID 04cc:1521 Philips Semiconductors USB 2.0 Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Module                  Size  Used by
    ipt_MASQUERADE          1407  0 
    xt_state                1098  0 
    ipt_REJECT              1928  0 
    xt_tcpudp               2011  0 
    iptable_filter          2271  0 
    nf_nat_h323             5077  0 
    nf_conntrack_h323      46926  1 nf_nat_h323
    nf_nat_pptp             1920  0 
    nf_conntrack_pptp       4413  1 nf_nat_pptp
    nf_conntrack_proto_gre     4021  1 nf_conntrack_pptp
    nf_nat_proto_gre        1259  1 nf_nat_pptp
    nf_nat_tftp              716  0 
    nf_conntrack_tftp       2893  1 nf_nat_tftp
    nf_nat_sip              5108  0 
    nf_conntrack_sip       15389  1 nf_nat_sip
    nf_nat_irc              1124  0 
    nf_conntrack_irc        3332  1 nf_nat_irc
    nf_nat_ftp              1836  0 
    nf_conntrack_ftp        5381  1 nf_nat_ftp
    iptable_nat             4414  0 
    nf_nat                 15735  9 ipt_MASQUERADE,nf_nat_h323,nf_nat_pptp,nf_nat_proto_gre,nf_nat_tftp,nf_nat_sip,nf_nat_irc,nf_nat_ftp,iptable_nat
    nf_conntrack_ipv4      10672  3 iptable_nat,nf_nat
    nf_conntrack           61583  18 ipt_MASQUERADE,xt_state,nf_nat_h323,nf_conntrack_h323,nf_nat_pptp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_nat_tftp,nf_conntrack_tftp,nf_nat_sip,nf_conntrack_sip,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,iptable_nat,nf_nat,nf_conntrack_ipv4
    nf_defrag_ipv4          1073  1 nf_conntrack_ipv4
    ip_tables               9991  2 iptable_filter,iptable_nat
    x_tables               14299  6 ipt_MASQUERADE,xt_state,ipt_REJECT,xt_tcpudp,iptable_nat,ip_tables
    isofs                  29250  1 
    udf                    78785  0 
    crc_itu_t               1371  1 udf
    nls_iso8859_1           3249  1 
    nls_cp437               4919  1 
    vfat                    8901  1 
    fat                    47767  1 vfat
    usb_storage            39425  2 
    binfmt_misc             6587  1 
    ppdev                   5259  0 
    rt2870sta             461811  0 
    arc4                    1153  2 
    rt2800usb              31531  0 
    rt2x00usb               9703  1 rt2800usb
    rt2x00lib              27509  2 rt2800usb,rt2x00usb
    snd_intel8x0           25588  2 
    snd_ac97_codec        100646  1 snd_intel8x0
    ac97_bus                1002  1 snd_ac97_codec
    snd_pcm_oss            35308  0 
    snd_mixer_oss          13746  1 snd_pcm_oss
    snd_pcm                70662  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_seq_dummy           1338  0 
    snd_seq_oss            26726  0 
    snd_seq_midi            4557  0 
    led_class               2864  1 rt2x00lib
    snd_rawmidi            19056  1 snd_seq_midi
    snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
    snd_seq                47263  7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
    fbcon                  35102  71 
    tileblit                2031  1 fbcon
    font                    7557  1 fbcon
    bitblit                 4707  1 fbcon
    softcursor              1189  1 bitblit
    vga16fb                11385  0 
    vgastate                8961  1 vga16fb
    mac80211              204922  2 rt2x00usb,rt2x00lib
    snd_timer              19098  2 snd_pcm,snd_seq
    snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
    i915                  282354  3 
    drm_kms_helper         29297  1 i915
    joydev                  8708  0 
    snd                    54148  15 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    hid_sunplus             1259  0 
    drm                   162471  4 i915,drm_kms_helper
    cfg80211              126485  2 rt2x00lib,mac80211
    i2c_algo_bit            5028  1 i915
    usbhid                 36110  0 
    hid                    67032  2 hid_sunplus,usbhid
    intel_agp              24177  2 i915
    crc_ccitt               1339  1 rt2800usb
    lp                      7028  0 
    video                  17375  1 i915
    psmouse                63245  0 
    soundcore               6620  1 snd
    snd_page_alloc          7076  2 snd_intel8x0,snd_pcm
    serio_raw               3978  0 
    agpgart                31724  2 drm,intel_agp
    output                  1871  1 video
    parport                32635  2 ppdev,lp
    floppy                 53016  0 
    tg3                   109292  0 
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000007f7e4000 (usable)
    [    0.000000]  BIOS-e820: 000000007f7e4000 - 0000000080000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [    0.000000] DMI 2.3 present.
    [    0.000000] last_pfn = 0x7f7e4 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-E7FFF write-protect
    [    0.000000]   E8000-EFFFF write-back
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask F80000000 write-back
    [    0.000000]   1 base 07F800000 mask FFF800000 uncachable
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
    [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
    [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
    [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  modified: 00000000000e8000 - 0000000000100000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 000000007f7e4000 (usable)
    [    0.000000]  modified: 000000007f7e4000 - 0000000080000000 (reserved)
    [    0.000000]  modified: 00000000d0000000 - 00000000e0000000 (reserved)
    [    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
    [    0.000000] initial memory mapped : 0 - 00c00000
    [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [    0.000000] Using x86 segment limits to approximate NX protection
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 0037400000 page 2M
    [    0.000000]  0037400000 - 00377fe000 page 4k
    [    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
    [    0.000000] RAMDISK: 37859000 - 37fefe86
    [    0.000000] Allocated new RAMDISK: 008de000 - 01074e86
    [    0.000000] Move RAMDISK from 0000000037859000 - 0000000037fefe85 to 008de000 - 01074e85
    [    0.000000] ACPI: RSDP 000e9c10 00014 (v00 COMPAQ)
    [    0.000000] ACPI: RSDT 7f7f4040 00038 (v01 COMPAQ CPQ0968  20080807      00000000)
    [    0.000000] ACPI: FACP 7f7f40ec 00074 (v01 COMPAQ GRANTSD  00000001      00000000)
    [    0.000000] ACPI: DSDT 7f7f4267 013F3 (v01 COMPAQ     DSDT 00000001 MSFT 0100000E)
    [    0.000000] ACPI: FACS 7f7f4000 00040
    [    0.000000] ACPI: SSDT 7f7f565a 0344E (v01 COMPAQ  PROJECT 00000001 MSFT 0100000E)
    [    0.000000] ACPI: APIC 7f7f4160 00068 (v01 COMPAQ GRANTSD  00000001      00000000)
    [    0.000000] ACPI: ASF! 7f7f41c8 00063 (v32 COMPAQ GRANTSD  00000001      00000000)
    [    0.000000] ACPI: MCFG 7f7f422b 0003C (v01 COMPAQ GRANTSD  00000001      00000000)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 1151MB HIGHMEM available.
    [    0.000000] 887MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 377fe000
    [    0.000000]   low ram: 0 - 377fe000
    [    0.000000]   node 0 low ram: 00000000 - 377fe000
    [    0.000000]   node 0 bootmap 00008000 - 0000ef00
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
    [    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
    [    0.000000]   #5 [00008da000 - 00008dd0ef]              BRK ==> [00008da000 - 00008dd0ef]
    [    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
    [    0.000000]   #7 [00008de000 - 0001074e86]      NEW RAMDISK ==> [00008de000 - 0001074e86]
    [    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
    [    0.000000] found SMP MP-table at [c00fe700] fe700
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x000377fe
    [    0.000000]   HighMem  0x000377fe -> 0x0007f7e4
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x00000002
    [    0.000000]     0: 0x00000006 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x0007f7e4
    [    0.000000] On node 0 totalpages: 522111
    [    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1076000
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1744 pages used for memmap
    [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 2304 pages used for memmap
    [    0.000000]   HighMem zone: 292582 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0xf808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
    [    0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:50000000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u2097152
    [    0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
    [    0.000000] pcpu-alloc: [0] 0 1 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 518031
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=4614b3ec-76ac-4932-936b-0696642f6f18 ro quiet splash
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 10444240 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (000377fe:0007f7e4)
    [    0.000000] Memory: 2044096k/2088848k available (4673k kernel code, 43328k reserved, 2121k data, 656k init, 1179544k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
    [    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
    [    0.000000]       .data : 0xc0590663 - 0xc07a2e48   (2121 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc0590663   (4673 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:2304 nr_irqs:424
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2795.041 MHz processor.
    [    0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5590.08 BogoMIPS (lpj=11180164)
    [    0.008028] Security Framework initialized
    [    0.008054] AppArmor: AppArmor initialized
    [    0.008066] Mount-cache hash table entries: 512
    [    0.012175] Initializing cgroup subsys ns
    [    0.012181] Initializing cgroup subsys cpuacct
    [    0.012187] Initializing cgroup subsys memory
    [    0.012196] Initializing cgroup subsys devices
    [    0.012200] Initializing cgroup subsys freezer
    [    0.012204] Initializing cgroup subsys net_cls
    [    0.012238] CPU: Trace cache: 12K uops, L1 D cache: 16K
    [    0.012242] CPU: L2 cache: 1024K
    [    0.012246] CPU: Physical Processor ID: 0
    [    0.012248] CPU: Processor Core ID: 0
    [    0.012253] mce: CPU supports 4 MCE banks
    [    0.012268] CPU0: Thermal monitoring enabled (TM1)
    [    0.012274] using mwait in idle threads.
    [    0.012282] Performance Events: no PMU driver, software events only.
    [    0.012290] Checking 'hlt' instruction... OK.
    [    0.032240] ACPI: Core revision 20090903
    [    0.040747] ftrace: converting mcount calls to 0f 1f 44 00 00
    [    0.040754] ftrace: allocating 21771 entries in 43 pages
    [    0.044072] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.044398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.085606] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
    [    0.088001] Booting processor 1 APIC 0x1 ip 0x6000
    [    0.012000] Initializing CPU#1
    [    0.012000] CPU: Trace cache: 12K uops, L1 D cache: 16K
    [    0.012000] CPU: L2 cache: 1024K
    [    0.012000] CPU: Physical Processor ID: 0
    [    0.012000] CPU: Processor Core ID: 0
    [    0.012000] CPU1: Thermal monitoring enabled (TM1)
    [    0.172078] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
    [    0.172099] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [    0.176026] Brought up 2 CPUs
    [    0.176031] Total of 2 processors activated (11180.00 BogoMIPS).
    [    0.176381] CPU0 attaching sched-domain:
    [    0.176389]  domain 0: span 0-1 level SIBLING
    [    0.176393]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [    0.176402]   domain 1: span 0-1 level MC
    [    0.176405]    groups: 0-1 (cpu_power = 1178)
    [    0.176414] CPU1 attaching sched-domain:
    [    0.176417]  domain 0: span 0-1 level SIBLING
    [    0.176420]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [    0.176428]   domain 1: span 0-1 level MC
    [    0.176431]    groups: 0-1 (cpu_power = 1178)
    [    0.176581] devtmpfs: initialized
    [    0.176581] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
    [    0.176581] regulator: core version 0.5
    [    0.176581] Time:  9:58:19  Date: 06/30/10
    [    0.176581] NET: Registered protocol family 16
    [    0.176581] Trying to unpack rootfs image as initramfs...
    [    0.176581] EISA bus registered
    [    0.176581] ACPI: bus type pci registered
    [    0.176581] PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255
    [    0.176581] PCI: MCFG area at d0000000 reserved in E820
    [    0.176581] PCI: Using MMCONFIG for extended config space
    [    0.176581] PCI: Using configuration type 1 for base access
    [    0.180119] bio: create slab <bio-0> at 0
    [    0.181483] ACPI: EC: Look up EC in DSDT
    [    0.186322] ACPI: Interpreter enabled
    [    0.186344] ACPI: (supports S0 S1 S3 S4 S5)
    [    0.186393] ACPI: Using IOAPIC for interrupt routing
    [    0.194015] ACPI: No dock devices found.
    [    0.194826] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
    [    0.194841] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70151e0), AE_ALREADY_EXISTS
    [    0.194856] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
    [    0.194894] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
    [    0.194910] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.195062] pci 0000:00:02.0: reg 10 32bit mmio: [0xcfd00000-0xcfd7ffff]
    [    0.195073] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
    [    0.195082] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xe0000000-0xefffffff]
    [    0.195092] pci 0000:00:02.0: reg 1c 32bit mmio: [0xcfd80000-0xcfdbffff]
    [    0.195238] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.195246] pci 0000:00:1c.0: PME# disabled
    [    0.195341] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.195348] pci 0000:00:1c.1: PME# disabled
    [    0.195433] pci 0000:00:1d.0: reg 20 io port: [0x1440-0x145f]
    [    0.195505] pci 0000:00:1d.1: reg 20 io port: [0x1460-0x147f]
    [    0.195575] pci 0000:00:1d.2: reg 20 io port: [0x1480-0x149f]
    [    0.195645] pci 0000:00:1d.3: reg 20 io port: [0x14a0-0x14bf]
    [    0.195723] pci 0000:00:1d.7: reg 10 32bit mmio: [0xcfdc0000-0xcfdc03ff]
    [    0.195793] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.195802] pci 0000:00:1d.7: PME# disabled
    [    0.195925] pci 0000:00:1e.2: reg 10 io port: [0x1000-0x10ff]
    [    0.195936] pci 0000:00:1e.2: reg 14 io port: [0x1400-0x143f]
    [    0.195947] pci 0000:00:1e.2: reg 18 32bit mmio: [0xcfdc0400-0xcfdc05ff]
    [    0.195958] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xcfdc0600-0xcfdc06ff]
    [    0.196017] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
    [    0.196025] pci 0000:00:1e.2: PME# disabled
    [    0.196123] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    [    0.196134] pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
    [    0.196141] pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH6 GPIO
    [    0.196148] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0400-047f
    [    0.196156] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0480-048f
    [    0.196192] pci 0000:00:1f.1: reg 10 io port: [0x1808-0x180f]
    [    0.196203] pci 0000:00:1f.1: reg 14 io port: [0x1828-0x182b]
    [    0.196214] pci 0000:00:1f.1: reg 18 io port: [0x1810-0x1817]
    [    0.196225] pci 0000:00:1f.1: reg 1c io port: [0x182c-0x182f]
    [    0.196236] pci 0000:00:1f.1: reg 20 io port: [0x14e0-0x14ef]
    [    0.196299] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
    [    0.196310] pci 0000:00:1f.2: reg 14 io port: [0x1830-0x1833]
    [    0.196320] pci 0000:00:1f.2: reg 18 io port: [0x1820-0x1827]
    [    0.196330] pci 0000:00:1f.2: reg 1c io port: [0x1834-0x1837]
    [    0.196340] pci 0000:00:1f.2: reg 20 io port: [0x14f0-0x14ff]
    [    0.196376] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.196383] pci 0000:00:1f.2: PME# disabled
    [    0.196546] pci 0000:40:00.0: reg 10 64bit mmio: [0xf0400000-0xf040ffff]
    [    0.196638] pci 0000:40:00.0: PME# supported from D3hot D3cold
    [    0.196646] pci 0000:40:00.0: PME# disabled
    [    0.196718] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0200000-0xf04fffff]
    [    0.196792] pci 0000:00:1e.0: transparent bridge
    [    0.196825] pci_bus 0000:00: on NUMA node 0
    [    0.196835] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.197184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
    [    0.197336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
    [    0.197498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
    [    0.198181] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
    [    0.198194] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70151e0), AE_ALREADY_EXISTS
    [    0.198236] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
    [    0.217917] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
    [    0.218114] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
    [    0.218304] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
    [    0.218501] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
    [    0.218693] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
    [    0.218884] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
    [    0.219080] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
    [    0.219271] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
    [    0.219483] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.219507] vgaarb: loaded
    [    0.219748] SCSI subsystem initialized
    [    0.219901] libata version 3.00 loaded.
    [    0.220061] usbcore: registered new interface driver usbfs
    [    0.220088] usbcore: registered new interface driver hub
    [    0.220138] usbcore: registered new device driver usb
    [    0.220457] ACPI: WMI: Mapper loaded
    [    0.220462] PCI: Using ACPI for IRQ routing
    [    0.220727] NetLabel: Initializing
    [    0.220732] NetLabel:  domain hash size = 128
    [    0.220735] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.220762] NetLabel:  unlabeled traffic allowed by default
    [    0.220919] hpet clockevent registered
    [    0.220925] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.220933] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.220944] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.224392] Switching to clocksource tsc
    [    0.227903] AppArmor: AppArmor Filesystem Enabled
    [    0.227930] pnp: PnP ACPI init
    [    0.227958] ACPI: bus type pnp registered
    [    0.230507] pnp 00:0a: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
    [    0.230518] pnp 00:0a: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
    [    0.230526] pnp 00:0a: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
    [    0.230533] pnp 00:0a: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
    [    0.232308] pnp: PnP ACPI: found 13 devices
    [    0.232314] ACPI: ACPI bus type pnp unregistered
    [    0.232321] PnPBIOS: Disabled by ACPI PNP
    [    0.232356] system 00:0a: ioport range 0x400-0x41f has been reserved
    [    0.232363] system 00:0a: ioport range 0x420-0x43f has been reserved
    [    0.232370] system 00:0a: ioport range 0x440-0x45f has been reserved
    [    0.232376] system 00:0a: ioport range 0x460-0x47f has been reserved
    [    0.232382] system 00:0a: ioport range 0x480-0x48f has been reserved
    [    0.232388] system 00:0a: ioport range 0xfa00-0xfa3f has been reserved
    [    0.232394] system 00:0a: ioport range 0xfc00-0xfc7f has been reserved
    [    0.232401] system 00:0a: ioport range 0xfc80-0xfcff has been reserved
    [    0.232407] system 00:0a: ioport range 0xfe00-0xfe7f has been reserved
    [    0.232413] system 00:0a: ioport range 0xfe80-0xfeff has been reserved
    [    0.232426] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
    [    0.232440] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
    [    0.232448] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
    [    0.232454] system 00:0c: iomem range 0xe8000-0xfffff could not be reserved
    [    0.232461] system 00:0c: iomem range 0xfec01000-0xffffffff has been reserved
    [    0.232467] system 00:0c: iomem range 0xd0000000-0xdfffffff has been reserved
    [    0.232473] system 00:0c: iomem range 0xcd800-0xe7fff has been reserved
    [    0.267425] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:20
    [    0.267433] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
    [    0.267443] pci 0000:00:1c.0:   MEM window: 0x80000000-0x801fffff
    [    0.267452] pci 0000:00:1c.0:   PREFETCH window: 0x00000080200000-0x000000803fffff
    [    0.267463] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:40
    [    0.267469] pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
    [    0.267478] pci 0000:00:1c.1:   MEM window: 0xf0200000-0xf04fffff
    [    0.267486] pci 0000:00:1c.1:   PREFETCH window: 0x00000080400000-0x000000805fffff
    [    0.267496] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
    [    0.267501] pci 0000:00:1e.0:   IO window: disabled
    [    0.267508] pci 0000:00:1e.0:   MEM window: disabled
    [    0.267515] pci 0000:00:1e.0:   PREFETCH window: disabled
    [    0.267542] pci 0000:00:1c.0: setting latency timer to 64
    [    0.267561]   alloc irq_desc for 17 on node -1
    [    0.267566]   alloc kstat_irqs on node -1
    [    0.267579] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.267587] pci 0000:00:1c.1: setting latency timer to 64
    [    0.267599] pci 0000:00:1e.0: setting latency timer to 64
    [    0.267609] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.267615] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [    0.267621] pci_bus 0000:20: resource 0 io:  [0x2000-0x2fff]
    [    0.267627] pci_bus 0000:20: resource 1 mem: [0x80000000-0x801fffff]
    [    0.267633] pci_bus 0000:20: resource 2 pref mem [0x80200000-0x803fffff]
    [    0.267639] pci_bus 0000:40: resource 0 io:  [0x3000-0x3fff]
    [    0.267644] pci_bus 0000:40: resource 1 mem: [0xf0200000-0xf04fffff]
    [    0.267650] pci_bus 0000:40: resource 2 pref mem [0x80400000-0x805fffff]
    [    0.267657] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
    [    0.267665] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
    [    0.267740] NET: Registered protocol family 2
    [    0.267933] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.268556] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.269273] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.269593] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.269601] TCP reno registered
    [    0.269821] NET: Registered protocol family 1
    [    0.269862] pci 0000:00:02.0: Boot video device
    [    0.270300] cpufreq-nforce2: No nForce2 chipset.
    [    0.270367] Scanning for low memory corruption every 60 seconds
    [    0.270590] audit: initializing netlink socket (disabled)
    [    0.270607] type=2000 audit(1277891898.266:1): initialized
    [    0.283706] highmem bounce pool size: 64 pages
    [    0.283719] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.286935] VFS: Disk quotas dquot_6.5.2
    [    0.287062] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.288351] fuse init (API version 7.13)
    [    0.288533] msgmni has been set to 1690
    [    0.288951] alg: No test for stdrng (krng)
    [    0.289066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.289072] io scheduler noop registered
    [    0.289077] io scheduler anticipatory registered
    [    0.289082] io scheduler deadline registered
    [    0.289179] io scheduler cfq registered (default)
    [    0.289415]   alloc irq_desc for 24 on node -1
    [    0.289421]   alloc kstat_irqs on node -1
    [    0.289438] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [    0.289451] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.289653]   alloc irq_desc for 25 on node -1
    [    0.289658]   alloc kstat_irqs on node -1
    [    0.289670] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [    0.289685] pcieport 0000:00:1c.1: setting latency timer to 64
    [    0.289862] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.290080] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
    [    0.290094] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70151e0), AE_ALREADY_EXISTS
    [    0.290143] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
    [    0.290357] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
    [    0.290371] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70151e0), AE_ALREADY_EXISTS
    [    0.290412] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
    [    0.290638] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
    [    0.290651] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70151e0), AE_ALREADY_EXISTS
    [    0.290692] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
    [    0.290883] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
    [    0.290898] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70151e0), AE_ALREADY_EXISTS
    [    0.290962] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
    [    0.291006] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.291206] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [    0.291219] ACPI: Power Button [PBTN]
    [    0.291304] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.291311] ACPI: Power Button [PWRF]
    [    0.291953] processor LNXCPU:00: registered as cooling_device0
    [    0.292446] processor LNXCPU:01: registered as cooling_device1
    [    0.294993] isapnp: Scanning for PnP cards...
    [    0.297640] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.300140] brd: module loaded
    [    0.301070] loop: module loaded
    [    0.301222] input: Macintosh mouse button emulation as /devices/virtual/input/input2
    [    0.301375] ata_piix 0000:00:1f.1: version 2.13
    [    0.301395] ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.301452] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    0.367101] scsi0 : ata_piix
    [    0.399393] scsi1 : ata_piix
    [    0.399648] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x14e0 irq 14
    [    0.399654] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x14e8 irq 15
    [    0.399701]   alloc irq_desc for 19 on node -1
    [    0.399705]   alloc kstat_irqs on node -1
    [    0.399716] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    0.399724] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [    0.510599] Freeing initrd memory: 7771k freed
    [    0.555063] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    0.555187] scsi2 : ata_piix
    [    0.555314] scsi3 : ata_piix
    [    0.555542] ata3: SATA max UDMA/133 cmd 0x1818 ctl 0x1830 bmdma 0x14f0 irq 19
    [    0.555548] ata4: SATA max UDMA/133 cmd 0x1820 ctl 0x1834 bmdma 0x14f8 irq 19
    [    0.556230] Fixed MDIO Bus: probed
    [    0.556302] PPP generic driver version 2.4.2
    [    0.556399] tun: Universal TUN/TAP device driver, 1.6
    [    0.556403] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.556573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.556608]   alloc irq_desc for 20 on node -1
    [    0.556613]   alloc kstat_irqs on node -1
    [    0.556623] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    0.556645] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.556651] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.556720] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    0.556757] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.560637] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
    [    0.560760] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfdc0000
    [    0.575042] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.575200] usb usb1: configuration #1 chosen from 1 choice
    [    0.575254] hub 1-0:1.0: USB hub found
    [    0.575269] hub 1-0:1.0: 8 ports detected
    [    0.575377] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.575405] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.575461] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    0.575471] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.575476] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.575535] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    0.575565] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001440
    [    0.575729] usb usb2: configuration #1 chosen from 1 choice
    [    0.575780] hub 2-0:1.0: USB hub found
    [    0.575792] hub 2-0:1.0: 2 ports detected
    [    0.575868]   alloc irq_desc for 18 on node -1
    [    0.575872]   alloc kstat_irqs on node -1
    [    0.575880] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [    0.575889] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.575894] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.575954] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    0.575992] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001460
    [    0.576152] usb usb3: configuration #1 chosen from 1 choice
    [    0.576202] hub 3-0:1.0: USB hub found
    [    0.576213] hub 3-0:1.0: 2 ports detected
    [    0.576289]   alloc irq_desc for 21 on node -1
    [    0.576293]   alloc kstat_irqs on node -1
    [    0.576300] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
    [    0.576310] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.576316] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.576381] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    0.576418] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001480
    [    0.576574] usb usb4: configuration #1 chosen from 1 choice
    [    0.576624] hub 4-0:1.0: USB hub found
    [    0.576635] hub 4-0:1.0: 2 ports detected
    [    0.576712]   alloc irq_desc for 22 on node -1
    [    0.576716]   alloc kstat_irqs on node -1
    [    0.576724] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
    [    0.576733] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    0.576739] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    0.576797] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    0.576835] uhci_hcd 0000:00:1d.3: irq 22, io base 0x000014a0
    [    0.576990] usb usb5: configuration #1 chosen from 1 choice
    [    0.577041] hub 5-0:1.0: USB hub found
    [    0.577052] hub 5-0:1.0: 2 ports detected
    [    0.577230] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
    [    0.579986] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.579999] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.580137] mice: PS/2 mouse device common for all mice
    [    0.580331] rtc_cmos 00:03: RTC can wake from S4
    [    0.580394] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.580427] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.580632] device-mapper: uevent: version 1.0.3
    [    0.580796] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    0.580905] device-mapper: multipath: version 1.1.0 loaded
    [    0.580910] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    0.581113] EISA: Probing bus 0 at eisa.0
    [    0.581121] Cannot allocate resource for EISA slot 1
    [    0.581126] Cannot allocate resource for EISA slot 2
    [    0.581130] Cannot allocate resource for EISA slot 3
    [    0.581153] EISA: Detected 0 cards.
    [    0.581275] cpuidle: using governor ladder
    [    0.581279] cpuidle: using governor menu
    [    0.582119] TCP cubic registered
    [    0.582370] NET: Registered protocol family 10
    [    0.583286] lo: Disabled Privacy Extensions
    [    0.583943] NET: Registered protocol family 17
    [    0.584016] Using IPI No-Shortcut mode
    [    0.584161] PM: Resume from disk failed.
    [    0.584179] registered taskstats version 1
    [    0.584513]   Magic number: 14:649:981
    [    0.584612] rtc_cmos 00:03: setting system clock to 2010-06-30 09:58:19 UTC (1277891899)
    [    0.584618] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.584621] EDD information not available.
    [    0.639184] ata1.00: ATAPI: Compaq  CRN-8245B, 1.16, max MWDMA2
    [    0.648621] isapnp: No Plug & Play device found
    [    0.655149] ata1.00: configured for MWDMA2
    [    0.656853] scsi 0:0:0:0: CD-ROM            COMPAQ   CD-ROM CRN-8245B 1.16 PQ: 0 ANSI: 5
    [    0.661418] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
    [    0.661423] Uniform CD-ROM driver Revision: 3.20
    [    0.661564] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    0.661649] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    0.733991] ata3.00: ATA-7: ST340014AS, 3.43, max UDMA/100
    [    0.733996] ata3.00: 78165360 sectors, multi 16: LBA48 
    [    0.747256] ata3.00: configured for UDMA/100
    [    0.747380] scsi 2:0:0:0: Direct-Access     ATA      ST340014AS       3.43 PQ: 0 ANSI: 5
    [    0.747573] sd 2:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
    [    0.747599] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [    0.747688] sd 2:0:0:0: [sda] Write Protect is off
    [    0.747695] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    0.747745] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    0.747953]  sda: sda1 sda2 < sda5 >
    [    0.779119] sd 2:0:0:0: [sda] Attached SCSI disk
    [    0.779142] Freeing unused kernel memory: 656k freed
    [    0.779650] Write protecting the kernel text: 4676k
    [    0.779708] Write protecting the kernel read-only data: 1840k
    [    0.806585] udev: starting version 151
    [    0.890981] usb 1-4: new high speed USB device using ehci_hcd and address 2
    [    1.011972] tg3.c:v3.102 (September 1, 2009)
    [    1.012005] tg3 0000:40:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.012021] tg3 0000:40:00.0: setting latency timer to 64
    [    1.023405] usb 1-4: configuration #1 chosen from 1 choice
    [    1.023856] hub 1-4:1.0: USB hub found
    [    1.023914] hub 1-4:1.0: 7 ports detected
    [    1.054931] eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:12:79:db:9a:50
    [    1.054937] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    [    1.054941] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [    1.054944] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    [    1.055865] FDC 0 is a post-1991 82077
    [    1.134899] usb 1-7: new high speed USB device using ehci_hcd and address 3
    [    1.235399] EXT4-fs (sda1): mounted filesystem with ordered data mode
    [    1.281634] usb 1-7: configuration #1 chosen from 1 choice
    [    1.408133] usb 1-4.5: new low speed USB device using ehci_hcd and address 5
    [    1.505850] usb 1-4.5: configuration #1 chosen from 1 choice
    [    1.744028] usb 5-2: new low speed USB device using uhci_hcd and address 2
    [    1.921869] usb 5-2: configuration #1 chosen from 1 choice
    [   10.275644] Adding 1646620k swap on /dev/sda5.  Priority:-1 extents:1 across:1646620k 
    [   10.302225] udev: starting version 151
    [   10.654656] intel_rng: Firmware space is locked read-only. If you can't or
    [   10.654660] intel_rng: don't want to disable this in firmware setup, and if
    [   10.654663] intel_rng: you are certain that your system has a functional
    [   10.654665] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [   10.679427] Linux agpgart interface v0.103
    [   10.713877] lp: driver loaded but no devices found
    [   10.762204] agpgart-intel 0000:00:00.0: Intel 915G Chipset
    [   10.762803] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    [   10.776630] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [   10.791949] usbcore: registered new interface driver hiddev
    [   10.794826] input: BTC USB Multimedia Cordless Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.5/1-4.5:1.0/input/input3
    [   10.795030] generic-usb 0003:046E:5577.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB Multimedia Cordless Keyboard] on usb-0000:00:1d.7-4.5/input0
    [   10.800309] input: BTC USB Multimedia Cordless Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.5/1-4.5:1.1/input/input4
    [   10.800677] generic-usb 0003:046E:5577.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Keyboard] on usb-0000:00:1d.7-4.5/input1
    [   10.800892] usbcore: registered new interface driver usbhid
    [   10.800903] usbhid: v2.6:USB HID core driver
    [   10.875916] type=1505 audit(1277888309.787:2):  operation="profile_load" pid=522 name="/sbin/dhclient3"
    [   10.876843] type=1505 audit(1277888309.791:3):  operation="profile_load" pid=522 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   10.877322] type=1505 audit(1277888309.791:4):  operation="profile_load" pid=522 name="/usr/lib/connman/scripts/dhclient-script"
    [   10.894522] cfg80211: Calling CRDA to update world regulatory domain
    [   10.958855] [drm] Initialized drm 1.1.0 20060810
    [   10.970410] input: MLK wireless combo set as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input5
    [   10.970577] sunplus 0003:04FC:05D8.0003: input,hidraw2: USB HID v1.00 Keyboard [MLK wireless combo set] on usb-0000:00:1d.3-2/input0
    [   10.998129] sunplus 0003:04FC:05D8.0004: fixing up Sunplus Wireless Desktop report descriptor
    [   11.000435] input: MLK wireless combo set as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input6
    [   11.001625] sunplus 0003:04FC:05D8.0004: input,hiddev97,hidraw3: USB HID v1.00 Mouse [MLK wireless combo set] on usb-0000:00:1d.3-2/input1
    [   11.079730] cfg80211: World regulatory domain updated:
    [   11.079737] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   11.079744] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   11.079749] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   11.079755] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   11.079760] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   11.079766] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   11.087407]   alloc irq_desc for 16 on node -1
    [   11.087415]   alloc kstat_irqs on node -1
    [   11.087426] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   11.087434] i915 0000:00:02.0: setting latency timer to 64
    [   11.094491] [drm] set up 7M of stolen space
    [   11.095309] [drm] initialized overlay support
    [   11.250136] fb0: inteldrmfb frame buffer device
    [   11.250140] registered panic notifier
    [   11.250150] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [   11.287966] vga16fb: initializing
    [   11.287975] vga16fb: mapped to 0xc00a0000
    [   11.287984] vga16fb: not registering due to another framebuffer present
    [   11.419312] Console: switching to colour frame buffer device 128x48
    [   11.426621] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [   11.426678] Intel ICH 0000:00:1e.2: setting latency timer to 64
    [   11.513655] type=1505 audit(1277888310.427:5):  operation="profile_load" pid=664 name="/usr/share/gdm/guest-session/Xsession"
    [   11.531670] type=1505 audit(1277888310.443:6):  operation="profile_replace" pid=666 name="/sbin/dhclient3"
    [   11.532615] type=1505 audit(1277888310.447:7):  operation="profile_replace" pid=666 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   11.533091] type=1505 audit(1277888310.447:8):  operation="profile_replace" pid=666 name="/usr/lib/connman/scripts/dhclient-script"
    [   11.545906] type=1505 audit(1277888310.459:9):  operation="profile_load" pid=672 name="/usr/bin/evince"
    [   11.557483] type=1505 audit(1277888310.471:10):  operation="profile_load" pid=672 name="/usr/bin/evince-previewer"
    [   11.564331] type=1505 audit(1277888310.479:11):  operation="profile_load" pid=672 name="/usr/bin/evince-thumbnailer"
    [   11.863652] AC'97 0 analog subsections not ready
    [   11.867653] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   11.877230] phy0: Selected rate control algorithm 'minstrel'
    [   11.880548] Registered led device: rt2800usb-phy0::radio
    [   11.880739] Registered led device: rt2800usb-phy0::assoc
    [   11.880894] Registered led device: rt2800usb-phy0::quality
    [   11.881450] usbcore: registered new interface driver rt2800usb
    [   11.929024] intel8x0_measure_ac97_clock: measured 56241 usecs (2710 samples)
    [   11.929030] intel8x0: clocking to 48000
    [   12.017023] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
    [   12.032317] rtusb init --->
    [   12.032535] usbcore: registered new interface driver rt2870
    [   12.090022] rt2800usb 1-7:1.0: firmware: requesting rt2870.bin
    [   12.399102] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   12.458651] ppdev: user-space parallel port driver
    [   12.824321] CPU0 attaching NULL sched-domain.
    [   12.824329] CPU1 attaching NULL sched-domain.
    [   12.852067] CPU0 attaching sched-domain:
    [   12.852073]  domain 0: span 0-1 level SIBLING
    [   12.852077]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [   12.852086]   domain 1: span 0-1 level MC
    [   12.852090]    groups: 0-1 (cpu_power = 1178)
    [   12.852097] CPU1 attaching sched-domain:
    [   12.852100]  domain 0: span 0-1 level SIBLING
    [   12.852104]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [   12.852112]   domain 1: span 0-1 level MC
    [   12.852115]    groups: 0-1 (cpu_power = 1178)
    [   14.285625] CPU0 attaching NULL sched-domain.
    [   14.285636] CPU1 attaching NULL sched-domain.
    [   14.317086] CPU0 attaching sched-domain:
    [   14.317093]  domain 0: span 0-1 level SIBLING
    [   14.317097]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [   14.317107]   domain 1: span 0-1 level MC
    [   14.317111]    groups: 0-1 (cpu_power = 1178)
    [   14.317119] CPU1 attaching sched-domain:
    [   14.317122]  domain 0: span 0-1 level SIBLING
    [   14.317126]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [   14.317134]   domain 1: span 0-1 level MC
    [   14.317137]    groups: 0-1 (cpu_power = 1178)
    [  151.213029] usb 1-2: new high speed USB device using ehci_hcd and address 6
    [  151.363684] usb 1-2: configuration #1 chosen from 1 choice
    [  151.396953] Initializing USB Mass Storage driver...
    [  151.400150] scsi4 : SCSI emulation for USB Mass Storage devices
    [  151.400356] usbcore: registered new interface driver usb-storage
    [  151.400364] USB Mass Storage support registered.
    [  151.407651] usb-storage: device found at 6
    [  151.407656] usb-storage: waiting for device to settle before scanning
    [  156.404478] usb-storage: device scan complete
    [  156.439979] scsi 4:0:0:0: CD-ROM            HP       DVD Writer 1040d EH23 PQ: 0 ANSI: 0
    [  156.449578] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [  156.450035] sr 4:0:0:0: Attached scsi CD-ROM sr1
    [  156.450791] sr 4:0:0:0: Attached scsi generic sg2 type 5
    [  159.960022] usb 1-5: new high speed USB device using ehci_hcd and address 7
    [  160.093598] usb 1-5: configuration #1 chosen from 1 choice
    [  160.094555] scsi5 : SCSI emulation for USB Mass Storage devices
    [  160.094746] usb-storage: device found at 7
    [  160.094752] usb-storage: waiting for device to settle before scanning
    [  165.092263] usb-storage: device scan complete
    [  165.092731] scsi 5:0:0:0: Direct-Access     WD       5000AAV External 1.06 PQ: 0 ANSI: 0
    [  165.097041] sd 5:0:0:0: Attached scsi generic sg3 type 0
    [  165.097610] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [  165.098523] sd 5:0:0:0: [sdb] Write Protect is off
    [  165.098530] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
    [  165.098535] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [  165.107154] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [  165.107166]  sdb: sdb1
    [  165.115711] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [  165.115719] sd 5:0:0:0: [sdb] Attached SCSI disk
    [  209.682811] UDF-fs: No VRS found
    [  209.682818] UDF-fs: No partition found (1)
    [  209.709189] ISO 9660 Extensions: Microsoft Joliet Level 3
    [  209.710309] ISOFS: changing to secondary root
    [  553.819007] wlan0: Trigger new scan to find an IBSS to join
    [  554.867728] ip_tables: (C) 2000-2006 Netfilter Core Team
    [  554.906747] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [  554.907608] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    [  554.907615] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
    [  554.907620] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    [  555.988033] wlan0: Trigger new scan to find an IBSS to join
    [  559.988326] wlan0: Trigger new scan to find an IBSS to join
    [  561.988660] wlan0: Creating new IBSS network, BSSID 1e:ba:e8:53:88:0a
    [  564.185010] wlan0: no IPv6 routers present
    [  575.339092] wlan0: Trigger new scan to find an IBSS to join

  4. #4
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Can you also post the output of
    Code:
    sudo ifconfig
    So far everything looks good.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  5. #5
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    You have two drivers loading for the card.
    Code:
    rt2870sta             461811  0 
    rt2800usb              31531  0
    EDIT: Two drivers prevents the device from being properly claimed.

    I'm not sure if rt2800usb actually works yet, so I would give it the boot and try rt2870sta.

    Blacklist (prevent from loading) rt2800usb
    Code:
    echo "blacklist rt2800usb" | sudo tee -a /etc/modprobe.d/blacklist.conf
    Bring down interface, unload and reload modules
    Code:
    sudo ifconfig wlan0 down
    sudo modprobe -r rt2800usb
    sudo modprobe -r rt2870sta
    sudo modprobe rt2870sta
    sudo depmod -a
    sudo ifconfig wlan0 up
    See if it works.

  6. #6
    Just Joined!
    Join Date
    Jun 2010
    Posts
    9
    Thank you. Here is the code for sudo if config

    Code:
     eth0      Link encap:Ethernet  HWaddr 00:12:79:db:9a:50  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1 
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0 
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B) 
              Interrupt:17 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0 
              inet6 addr: ::1/128 Scope:Host 
              UP LOOPBACK RUNNING  MTU:16436  Metric:1 
              RX packets:16 errors:0 dropped:0 overruns:0 frame:0 
              TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 
              collisions:0 txqueuelen:0 
              RX bytes:960 (960.0 B)  TX bytes:960 (960.0 B) 
    
    wlan0     Link encap:Ethernet  HWaddr 00:1f:1f:83:2e:c3  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1 
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0 
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    Thanks again.

  7. #7
    Just Joined!
    Join Date
    Jun 2010
    Posts
    9
    Reed9 thank you will give that go just now... brb

  8. #8
    Just Joined!
    Join Date
    Jun 2010
    Posts
    9
    I've just tried what reed9 suggested.

    It must have done something because now the NetworkManager Applet doesn't have a wireless connection option anymore.

    However I can't close my terminal window because apparently there is a process still running, how long should this take?

    Thanks again.

  9. #9
    Just Joined!
    Join Date
    Jun 2010
    Posts
    9
    Oh! We have progress.

    Now the NetworkManager Applet has a wireless internet device but apparently its not ready...

    Help?

    Thanks
    Rachel

  10. #10
    Just Joined!
    Join Date
    Jun 2010
    Posts
    9
    Ah...

    I tried to reboot the whole machine and it would appear on restart that now neither my wireless mouse or my wireless keyboard work... which makes signing in rather tricky...

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •