Find the answer to your Linux question:
Results 1 to 3 of 3
Hello, I just bought a new laptop (Clevo w832t) with the option Mini Wifi PCI 5300 card. I run lspci (hereafter) but cannot found any Wireless or Wifi controller card. ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Linux Newbie
    Join Date
    Dec 2008
    Location
    Luxembourg
    Posts
    135

    lspci : wifi card detection ? (Intel Wifi Link 5300)


    Hello,

    I just bought a new laptop (Clevo w832t) with the option Mini Wifi PCI 5300 card.

    I run lspci (hereafter) but cannot found any Wireless or Wifi controller card.
    Can I confim 100% from there the card is simply ... not present ?

    The LED wifi is green-OK so the vendor told (by phone) me that this green light proves the card is installed but not configured.

    So is the 5300 compatible with Linux ? As far as I know yes.
    I tried both latest distros Ubuntu 10.04 and Fedora 13.

    Thanks for your advice

    lspci :

    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    06:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 80)
    06:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 80)
    06:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 80)
    -----> 06:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03)



    Bye,
    Bruno

  2. #2
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    Are you comfortable opening up the machine and looking for the card?

    I'm guessing the Mini Wifi PCI 5300 card is an Intel PRO 5300 card, which is supported in linux. Even if not, it should show up with lspci. Even if the pciid wasn't recognized it should appear as an unknown device.

    Can you post the output of
    Code:
    dmesg

  3. #3
    Linux Newbie
    Join Date
    Dec 2008
    Location
    Luxembourg
    Posts
    135
    Yes, I intend to open it
    I start to be quite 100% sure the wifi card is simply missing.

    However I still hesitate as I might loose the warranty (the laptop is just 3 days old).
    But I bought it via Internet and so will need to package it, transport fees, delays ..etc.. to post it back so it would be probably easier to buy a mini PCI wifi card and plug it myself.

    dmesg:

    I cannot see anything related to wireless PCI card.

    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2)
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] NSC Geode by NSC
    [ 0.000000] Cyrix CyrixInstead
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] Transmeta GenuineTMx86
    [ 0.000000] Transmeta TransmetaCPU
    [ 0.000000] UMC UMC UMC UMC
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
    [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d6a1000 (usable)
    [ 0.000000] BIOS-e820: 000000007d6a1000 - 000000007d6a7000 (reserved)
    [ 0.000000] BIOS-e820: 000000007d6a7000 - 000000007d7ba000 (usable)
    [ 0.000000] BIOS-e820: 000000007d7ba000 - 000000007d80f000 (reserved)
    [ 0.000000] BIOS-e820: 000000007d80f000 - 000000007d908000 (usable)
    [ 0.000000] BIOS-e820: 000000007d908000 - 000000007db0f000 (reserved)
    [ 0.000000] BIOS-e820: 000000007db0f000 - 000000007db19000 (usable)
    [ 0.000000] BIOS-e820: 000000007db19000 - 000000007db1f000 (reserved)
    [ 0.000000] BIOS-e820: 000000007db1f000 - 000000007db64000 (usable)
    [ 0.000000] BIOS-e820: 000000007db64000 - 000000007db9f000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007db9f000 - 000000007dbe4000 (usable)
    [ 0.000000] BIOS-e820: 000000007dbe4000 - 000000007dbff000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007dbff000 - 000000007dc00000 (usable)
    [ 0.000000] BIOS-e820: 000000007dc00000 - 000000007de00000 (reserved)
    [ 0.000000] BIOS-e820: 000000007e000000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    [ 0.000000] DMI present.
    [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0x7dc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 07E000000 mask FFE000000 uncachable
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 3 base 07DE00000 mask FFFE00000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] Scanning 0 areas for low memory corruption
    [ 0.000000] modified physical RAM map:
    [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
    [ 0.000000] modified: 0000000000010000 - 000000000009d400 (usable)
    [ 0.000000] modified: 000000000009d400 - 00000000000a0000 (reserved)
    [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
    [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] modified: 0000000000100000 - 000000007d6a1000 (usable)
    [ 0.000000] modified: 000000007d6a1000 - 000000007d6a7000 (reserved)
    [ 0.000000] modified: 000000007d6a7000 - 000000007d7ba000 (usable)
    [ 0.000000] modified: 000000007d7ba000 - 000000007d80f000 (reserved)
    [ 0.000000] modified: 000000007d80f000 - 000000007d908000 (usable)
    [ 0.000000] modified: 000000007d908000 - 000000007db0f000 (reserved)
    [ 0.000000] modified: 000000007db0f000 - 000000007db19000 (usable)
    [ 0.000000] modified: 000000007db19000 - 000000007db1f000 (reserved)
    [ 0.000000] modified: 000000007db1f000 - 000000007db64000 (usable)
    [ 0.000000] modified: 000000007db64000 - 000000007db9f000 (ACPI NVS)
    [ 0.000000] modified: 000000007db9f000 - 000000007dbe4000 (usable)
    [ 0.000000] modified: 000000007dbe4000 - 000000007dbff000 (ACPI data)
    [ 0.000000] modified: 000000007dbff000 - 000000007dc00000 (usable)
    [ 0.000000] modified: 000000007dc00000 - 000000007de00000 (reserved)
    [ 0.000000] modified: 000000007e000000 - 0000000080000000 (reserved)
    [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved)
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] Using x86 segment limits to approximate NX protection
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
    [ 0.000000] RAMDISK: 37856000 - 37fef2fb
    [ 0.000000] Allocated new RAMDISK: 008de000 - 010772fb
    [ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef2fa to 008de000 - 010772fa
    [ 0.000000] ACPI: RSDP 000f7800 00024 (v02 PTLTD )
    [ 0.000000] ACPI: XSDT 7dbf888e 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 7dbe8000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 7dbe9000 0647A (v02 Intel CANTIGA 06040000 INTL 20050624)
    [ 0.000000] ACPI: FACS 7db9efc0 00040
    [ 0.000000] ACPI: HPET 7dbfeefc 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 7dbfef34 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: APIC 7dbfef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 7dbfefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SSDT 7dbe7000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    [ 0.000000] ACPI: SSDT 7dbe6000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    [ 0.000000] ACPI: SSDT 7dbe5000 0020F (v01 PmRef ApTst 00003000 INTL 20050624)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1124MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] node 0 low ram: 00000000 - 377fe000
    [ 0.000000] node 0 bootmap 00011000 - 00017f00
    [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
    [ 0.000000] #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
    [ 0.000000] #5 [00008da000 - 00008dd224] BRK ==> [00008da000 - 00008dd224]
    [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
    [ 0.000000] #7 [00008de000 - 00010772fb] NEW RAMDISK ==> [00008de000 - 00010772fb]
    [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
    [ 0.000000] found SMP MP-table at [c00f7890] f7890
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007dc00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[8] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009d
    [ 0.000000] 0: 0x00000100 -> 0x0007d6a1
    [ 0.000000] 0: 0x0007d6a7 -> 0x0007d7ba
    [ 0.000000] 0: 0x0007d80f -> 0x0007d908
    [ 0.000000] 0: 0x0007db0f -> 0x0007db19
    [ 0.000000] 0: 0x0007db1f -> 0x0007db64
    [ 0.000000] 0: 0x0007db9f -> 0x0007dbe4
    [ 0.000000] 0: 0x0007dbff -> 0x0007dc00
    [ 0.000000] On node 0 totalpages: 514255
    [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1079200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2249 pages used for memmap
    [ 0.000000] HighMem zone: 284795 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 24
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u2097152
    [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510230
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=71ec984f-4de4-4950-b2a8-2a905b4bc7e7 ro quiet splash
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Enabling fast FPU save and restore... done.
    [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 10301120 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007dc00)
    [ 0.000000] Memory: 2012936k/2060288k available (4673k kernel code, 42972k reserved, 2121k data, 656k init, 1148176k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
    [ 0.000000] .data : 0xc0590663 - 0xc07a2e48 (2121 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc0590663 (4673 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] NR_IRQS:2304 nr_irqs:424
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1296.843 MHz processor.
    [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.68 BogoMIPS (lpj=5187372)
    [ 0.004029] Security Framework initialized
    [ 0.004055] AppArmor: AppArmor initialized
    [ 0.004064] Mount-cache hash table entries: 512
    [ 0.004225] Initializing cgroup subsys ns
    [ 0.004230] Initializing cgroup subsys cpuacct
    [ 0.004236] Initializing cgroup subsys memory
    [ 0.004246] Initializing cgroup subsys devices
    [ 0.004249] Initializing cgroup subsys freezer
    [ 0.004253] Initializing cgroup subsys net_cls
    [ 0.004279] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.004283] CPU: L2 cache: 2048K
    [ 0.004288] CPU: Physical Processor ID: 0
    [ 0.004290] CPU: Processor Core ID: 0
    [ 0.004296] mce: CPU supports 6 MCE banks
    [ 0.004308] CPU0: Thermal monitoring enabled (TM2)
    [ 0.004313] using mwait in idle threads.
    [ 0.004321] Performance Events: Core2 events, Intel PMU driver.
    [ 0.004333] ... version: 2
    [ 0.004336] ... bit width: 40
    [ 0.004339] ... generic registers: 2
    [ 0.004342] ... value mask: 000000ffffffffff
    [ 0.004345] ... max period: 000000007fffffff
    [ 0.004348] ... fixed-purpose events: 3
    [ 0.004350] ... event mask: 0000000700000003
    [ 0.004357] Checking 'hlt' instruction... OK.
    [ 0.025065] ACPI: Core revision 20090903
    [ 0.040013] ftrace: converting mcount calls to 0f 1f 44 00 00
    [ 0.040020] ftrace: allocating 21771 entries in 43 pages
    [ 0.044065] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.044430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.087344] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a
    [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
    [ 0.008000] Initializing CPU#1
    [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.008000] CPU: L2 cache: 2048K
    [ 0.008000] CPU: Physical Processor ID: 0
    [ 0.008000] CPU: Processor Core ID: 1
    [ 0.008000] CPU1: Thermal monitoring enabled (TM2)
    [ 0.172064] CPU1: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a
    [ 0.172083] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [ 0.176024] Brought up 2 CPUs
    [ 0.176028] Total of 2 processors activated (5187.17 BogoMIPS).
    [ 0.176746] CPU0 attaching sched-domain:
    [ 0.176751] domain 0: span 0-1 level MC
    [ 0.176754] groups: 0 1
    [ 0.176763] CPU1 attaching sched-domain:
    [ 0.176766] domain 0: span 0-1 level MC
    [ 0.176770] groups: 1 0
    [ 0.176897] devtmpfs: initialized
    [ 0.176897] regulator: core version 0.5
    [ 0.176897] Time: 20:37:28 Date: 06/28/10
    [ 0.176897] NET: Registered protocol family 16
    [ 0.176897] Trying to unpack rootfs image as initramfs...
    [ 0.176897] EISA bus registered
    [ 0.176897] ACPI: bus type pci registered
    [ 0.176897] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [ 0.176897] PCI: MCFG area at e0000000 reserved in E820
    [ 0.176897] PCI: Using MMCONFIG for extended config space
    [ 0.176897] PCI: Using configuration type 1 for base access
    [ 0.180144] bio: create slab <bio-0> at 0
    [ 0.181717] ACPI: EC: Look up EC in DSDT
    [ 0.186545] ACPI: BIOS _OSI(Linux) query ignored
    [ 0.188208] ACPI: Interpreter enabled
    [ 0.188233] ACPI: (supports S0 S3 S4 S5)
    [ 0.188269] ACPI: Using IOAPIC for interrupt routing
    [ 0.196488] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.196869] ACPI: No dock devices found.
    [ 0.197668] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [ 0.197799] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf83fffff]
    [ 0.197811] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
    [ 0.197819] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
    [ 0.197878] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8400000-0xf84fffff]
    [ 0.198023] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
    [ 0.198131] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
    [ 0.198239] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
    [ 0.198349] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8804800-0xf8804bff]
    [ 0.198432] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.198439] pci 0000:00:1a.7: PME# disabled
    [ 0.198506] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8600000-0xf8603fff]
    [ 0.198576] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.198582] pci 0000:00:1b.0: PME# disabled
    [ 0.198687] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.198694] pci 0000:00:1c.0: PME# disabled
    [ 0.198804] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.198810] pci 0000:00:1c.1: PME# disabled
    [ 0.198924] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.198930] pci 0000:00:1c.4: PME# disabled
    [ 0.199027] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
    [ 0.199141] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
    [ 0.199258] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
    [ 0.199386] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8804c00-0xf8804fff]
    [ 0.200024] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.200031] pci 0000:00:1d.7: PME# disabled
    [ 0.200322] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
    [ 0.200332] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
    [ 0.200342] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
    [ 0.200352] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
    [ 0.200362] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
    [ 0.200372] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8804000-0xf88047ff]
    [ 0.200427] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.200433] pci 0000:00:1f.2: PME# disabled
    [ 0.200482] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
    [ 0.200505] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
    [ 0.200675] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
    [ 0.200682] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
    [ 0.200693] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
    [ 0.200760] pci 0000:06:00.0: reg 10 32bit mmio: [0xf8500000-0xf85000ff]
    [ 0.200939] pci 0000:06:00.2: reg 10 32bit mmio: [0xf8500400-0xf85004ff]
    [ 0.201114] pci 0000:06:00.3: reg 10 32bit mmio: [0xf8500800-0xf85008ff]
    [ 0.201289] pci 0000:06:00.5: reg 10 32bit mmio: [0xf8504000-0xf8507fff]
    [ 0.201311] pci 0000:06:00.5: reg 18 io port: [0x3400-0x347f]
    [ 0.201325] pci 0000:06:00.5: reg 1c io port: [0x3000-0x30ff]
    [ 0.201406] pci 0000:06:00.5: PME# supported from D0 D3hot D3cold
    [ 0.201414] pci 0000:06:00.5: PME# disabled
    [ 0.201499] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff]
    [ 0.201506] pci 0000:00:1c.4: bridge 32bit mmio: [0xf8500000-0xf85fffff]
    [ 0.201586] pci 0000:00:1e.0: transparent bridge
    [ 0.201625] pci_bus 0000:00: on NUMA node 0
    [ 0.201633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.201956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.202280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.202401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.202521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.219042] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.219194] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.219341] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 0.219486] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.219631] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.219778] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.219923] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.220084] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [ 0.220244] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
    [ 0.220267] vgaarb: loaded
    [ 0.220439] SCSI subsystem initialized
    [ 0.220553] libata version 3.00 loaded.
    [ 0.220651] usbcore: registered new interface driver usbfs
    [ 0.220669] usbcore: registered new interface driver hub
    [ 0.220705] usbcore: registered new device driver usb
    [ 0.220923] ACPI: WMI: Mapper loaded
    [ 0.220926] PCI: Using ACPI for IRQ routing
    [ 0.221192] NetLabel: Initializing
    [ 0.221195] NetLabel: domain hash size = 128
    [ 0.221198] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.221218] NetLabel: unlabeled traffic allowed by default
    [ 0.221265] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.221274] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.224094] Switching to clocksource tsc
    [ 0.227599] AppArmor: AppArmor Filesystem Enabled
    [ 0.227616] pnp: PnP ACPI init
    [ 0.227635] ACPI: bus type pnp registered
    [ 0.228958] pnp 00:05: io resource (0x3322-0x3323) overlaps 0000:00:1c.4 BAR 13 (0x3000-0x3fff), disabling
    [ 0.230512] pnp: PnP ACPI: found 10 devices
    [ 0.230516] ACPI: ACPI bus type pnp unregistered
    [ 0.230523] PnPBIOS: Disabled by ACPI PNP
    [ 0.230542] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
    [ 0.230553] system 00:05: ioport range 0x680-0x69f has been reserved
    [ 0.230558] system 00:05: ioport range 0x400-0x47f has been reserved
    [ 0.230562] system 00:05: ioport range 0x480-0x48f has been reserved
    [ 0.230567] system 00:05: ioport range 0xffff-0xffff has been reserved
    [ 0.230571] system 00:05: ioport range 0xffff-0xffff has been reserved
    [ 0.230576] system 00:05: ioport range 0x1000-0x107f has been reserved
    [ 0.230580] system 00:05: ioport range 0x1180-0x11ff has been reserved
    [ 0.230584] system 00:05: ioport range 0x164e-0x164f has been reserved
    [ 0.230589] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
    [ 0.230600] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
    [ 0.230604] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
    [ 0.230609] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
    [ 0.230613] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
    [ 0.230618] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
    [ 0.230622] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
    [ 0.230627] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
    [ 0.265485] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    [ 0.265492] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
    [ 0.265501] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
    [ 0.265508] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
    [ 0.265518] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
    [ 0.265523] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
    [ 0.265531] pci 0000:00:1c.1: MEM window: 0xf4000000-0xf7ffffff
    [ 0.265538] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
    [ 0.265548] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
    [ 0.265553] pci 0000:00:1c.4: IO window: 0x3000-0x3fff
    [ 0.265562] pci 0000:00:1c.4: MEM window: 0xf8500000-0xf85fffff
    [ 0.265568] pci 0000:00:1c.4: PREFETCH window: 0x00000080400000-0x000000805fffff
    [ 0.265579] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
    [ 0.265582] pci 0000:00:1e.0: IO window: disabled
    [ 0.265589] pci 0000:00:1e.0: MEM window: disabled
    [ 0.265596] pci 0000:00:1e.0: PREFETCH window: disabled
    [ 0.265621] alloc irq_desc for 17 on node -1
    [ 0.265625] alloc kstat_irqs on node -1
    [ 0.265634] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.265643] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.265655] alloc irq_desc for 16 on node -1
    [ 0.265658] alloc kstat_irqs on node -1
    [ 0.265663] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.265670] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.265683] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.265690] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.265701] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.265708] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    [ 0.265712] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [ 0.265716] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
    [ 0.265720] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff]
    [ 0.265724] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]
    [ 0.265729] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
    [ 0.265733] pci_bus 0000:04: resource 1 mem: [0xf4000000-0xf7ffffff]
    [ 0.265736] pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf3ffffff]
    [ 0.265740] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
    [ 0.265744] pci_bus 0000:06: resource 1 mem: [0xf8500000-0xf85fffff]
    [ 0.265748] pci_bus 0000:06: resource 2 pref mem [0x80400000-0x805fffff]
    [ 0.265752] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
    [ 0.265756] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
    [ 0.265810] NET: Registered protocol family 2
    [ 0.265957] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.266432] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.267040] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.267308] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.267312] TCP reno registered
    [ 0.267429] NET: Registered protocol family 1
    [ 0.267456] pci 0000:00:02.0: Boot video device
    [ 0.267678] Simple Boot Flag at 0x36 set to 0x1
    [ 0.267957] cpufreq-nforce2: No nForce2 chipset.
    [ 0.267994] Scanning for low memory corruption every 60 seconds
    [ 0.268147] audit: initializing netlink socket (disabled)
    [ 0.268163] type=2000 audit(1277757447.267:1): initialized
    [ 0.283546] highmem bounce pool size: 64 pages
    [ 0.283554] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.285904] VFS: Disk quotas dquot_6.5.2
    [ 0.285992] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.286861] fuse init (API version 7.13)
    [ 0.286991] msgmni has been set to 1691
    [ 0.287288] alg: No test for stdrng (krng)
    [ 0.287366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.287371] io scheduler noop registered
    [ 0.287374] io scheduler anticipatory registered
    [ 0.287377] io scheduler deadline registered
    [ 0.287439] io scheduler cfq registered (default)
    [ 0.287667] alloc irq_desc for 24 on node -1
    [ 0.287671] alloc kstat_irqs on node -1
    [ 0.287686] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [ 0.287702] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.287916] alloc irq_desc for 25 on node -1
    [ 0.287919] alloc kstat_irqs on node -1
    [ 0.287931] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [ 0.287946] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.288149] alloc irq_desc for 26 on node -1
    [ 0.288152] alloc kstat_irqs on node -1
    [ 0.288163] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
    [ 0.288177] pcieport 0000:00:1c.4: setting latency timer to 64
    [ 0.288319] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.288489] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.289000] ACPI Error (psargs-0359): [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
    [ 0.289010] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__.ADJP] (Node f701585, AE_NOT_FOUND
    [ 0.289048] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR] (Node f701582, AE_NOT_FOUND
    [ 0.289089] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20090903/ac-140)
    [ 0.289201] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [ 0.289211] ACPI: Power Button [PWRB]
    [ 0.289278] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
    [ 0.289286] ACPI: Sleep Button [SLPB]
    [ 0.289350] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    [ 0.308094] ACPI: Lid Switch [LID0]
    [ 0.308181] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 0.308186] ACPI: Power Button [PWRF]
    [ 0.309377] ACPI: SSDT 7db1aca0 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.310113] ACPI: SSDT 7db196a0 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.313313] Monitor-Mwait will be used to enter C-1 state
    [ 0.313363] Monitor-Mwait will be used to enter C-2 state
    [ 0.313404] Monitor-Mwait will be used to enter C-3 state
    [ 0.313414] Marking TSC unstable due to TSC halts in idle
    [ 0.313491] processor LNXCPU:00: registered as cooling_device0
    [ 0.314126] ACPI: SSDT 7db1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    [ 0.314691] ACPI: SSDT 7db1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    [ 0.315520] Switching to clocksource hpet
    [ 0.321280] processor LNXCPU:01: registered as cooling_device1
    [ 0.328804] thermal LNXTHERM:01: registered as thermal_zone0
    [ 0.328817] ACPI: Thermal Zone [TZ0] (57 C)
    [ 0.331107] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 0.333106] brd: module loaded
    [ 0.333797] loop: module loaded
    [ 0.333912] input: Macintosh mouse button emulation as /devices/virtual/input/input4
    [ 0.334538] Fixed MDIO Bus: probed
    [ 0.334588] PPP generic driver version 2.4.2
    [ 0.334635] tun: Universal TUN/TAP device driver, 1.6
    [ 0.334638] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [ 0.334754] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.334784] alloc irq_desc for 19 on node -1
    [ 0.334788] alloc kstat_irqs on node -1
    [ 0.334797] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 0.334813] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.334819] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.334869] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.334910] ehci_hcd 0000:00:1a.7: debug port 1
    [ 0.338792] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [ 0.338839] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf8804800
    [ 0.342743] isapnp: Scanning for PnP cards...
    [ 0.368286] ACPI: Battery Slot [BAT0] (battery present)
    [ 0.392379] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.392534] usb usb1: configuration #1 chosen from 1 choice
    [ 0.392586] hub 1-0:1.0: USB hub found
    [ 0.392598] hub 1-0:1.0: 6 ports detected
    [ 0.392694] alloc irq_desc for 23 on node -1
    [ 0.392698] alloc kstat_irqs on node -1
    [ 0.392707] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.392735] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.392740] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.392794] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.392830] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.396709] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.396729] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8804c00
    [ 0.444170] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.444328] usb usb2: configuration #1 chosen from 1 choice
    [ 0.444369] hub 2-0:1.0: USB hub found
    [ 0.444381] hub 2-0:1.0: 6 ports detected
    [ 0.444474] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.444501] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.444555] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.444566] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.444571] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.444626] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.444672] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
    [ 0.444798] usb usb3: configuration #1 chosen from 1 choice
    [ 0.444835] hub 3-0:1.0: USB hub found
    [ 0.444844] hub 3-0:1.0: 2 ports detected
    [ 0.444909] alloc irq_desc for 21 on node -1
    [ 0.444912] alloc kstat_irqs on node -1
    [ 0.444920] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.444929] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.444934] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.444978] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.445019] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
    [ 0.445152] usb usb4: configuration #1 chosen from 1 choice
    [ 0.445194] hub 4-0:1.0: USB hub found
    [ 0.445203] hub 4-0:1.0: 2 ports detected
    [ 0.445265] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 0.445274] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 0.445279] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 0.445323] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 0.445355] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
    [ 0.445476] usb usb5: configuration #1 chosen from 1 choice
    [ 0.445517] hub 5-0:1.0: USB hub found
    [ 0.445525] hub 5-0:1.0: 2 ports detected
    [ 0.445588] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.445597] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.445602] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.445654] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 0.445685] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
    [ 0.445819] usb usb6: configuration #1 chosen from 1 choice
    [ 0.445857] hub 6-0:1.0: USB hub found
    [ 0.445866] hub 6-0:1.0: 2 ports detected
    [ 0.445930] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.445939] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.445943] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.445988] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 0.446019] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
    [ 0.446149] usb usb7: configuration #1 chosen from 1 choice
    [ 0.446187] hub 7-0:1.0: USB hub found
    [ 0.446196] hub 7-0:1.0: 2 ports detected
    [ 0.446259] alloc irq_desc for 18 on node -1
    [ 0.446262] alloc kstat_irqs on node -1
    [ 0.446268] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.446277] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.446282] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.446332] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 0.446373] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
    [ 0.446503] usb usb8: configuration #1 chosen from 1 choice
    [ 0.446541] hub 8-0:1.0: USB hub found
    [ 0.446549] hub 8-0:1.0: 2 ports detected
    [ 0.446687] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.451309] i8042.c: Detected active multiplexing controller, rev 1.1.
    [ 0.453669] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.453681] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.453723] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.453757] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.453789] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.453962] mice: PS/2 mouse device common for all mice
    [ 0.454265] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.454302] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.454461] device-mapper: uevent: version 1.0.3
    [ 0.490472] Freeing initrd memory: 7780k freed
    [ 0.498301] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [ 0.498472] device-mapper: multipath: version 1.1.0 loaded
    [ 0.498476] device-mapper: multipath round-robin: version 1.0.0 loaded
    [ 0.498665] EISA: Probing bus 0 at eisa.0
    [ 0.498673] Cannot allocate resource for EISA slot 1
    [ 0.498678] Cannot allocate resource for EISA slot 2
    [ 0.498682] Cannot allocate resource for EISA slot 3
    [ 0.498685] Cannot allocate resource for EISA slot 4
    [ 0.498705] EISA: Detected 0 cards.
    [ 0.498906] cpuidle: using governor ladder
    [ 0.499077] cpuidle: using governor menu
    [ 0.499754] TCP cubic registered
    [ 0.499984] NET: Registered protocol family 10
    [ 0.500687] lo: Disabled Privacy Extensions
    [ 0.501351] NET: Registered protocol family 17
    [ 0.502183] Using IPI No-Shortcut mode
    [ 0.502295] PM: Resume from disk failed.
    [ 0.502312] registered taskstats version 1
    [ 0.502999] Magic number: 14:806:650
    [ 0.503062] processor LNXCPU:03: hash matches
    [ 0.503106] rtc_cmos 00:06: setting system clock to 2010-06-28 20:37:28 UTC (127775744
    [ 0.503111] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 0.503114] EDD information not available.
    [ 0.513198] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
    [ 0.716307] isapnp: No Plug & Play device found
    [ 0.716342] Freeing unused kernel memory: 656k freed
    [ 0.716856] Write protecting the kernel text: 4676k
    [ 0.716932] Write protecting the kernel read-only data: 1840k
    [ 0.741383] udev: starting version 151
    [ 0.784115] usb 2-2: new high speed USB device using ehci_hcd and address 2
    [ 0.891220] ahci 0000:00:1f.2: version 3.0
    [ 0.891246] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.891304] alloc irq_desc for 27 on node -1
    [ 0.891308] alloc kstat_irqs on node -1
    [ 0.891323] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
    [ 0.891387] ahci: SSS flag set, parallel bus scan disabled
    [ 0.891421] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
    [ 0.891427] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc sxs
    [ 0.891435] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.891583] scsi0 : ahci
    [ 0.891731] scsi1 : ahci
    [ 0.891815] scsi2 : ahci
    [ 0.891898] scsi3 : ahci
    [ 0.891969] ata1: SATA max UDMA/133 abar m2048@0xf8804000 port 0xf8804100 irq 27
    [ 0.891972] ata2: DUMMY
    [ 0.891975] ata3: DUMMY
    [ 0.891977] ata4: DUMMY
    [ 0.918782] usb 2-2: configuration #1 chosen from 1 choice
    [ 0.929633] Initializing USB Mass Storage driver...
    [ 0.929813] scsi4 : SCSI emulation for USB Mass Storage devices
    [ 0.929930] usbcore: registered new interface driver usb-storage
    [ 0.929934] USB Mass Storage support registered.
    [ 0.929941] usb-storage: device found at 2
    [ 0.929944] usb-storage: waiting for device to settle before scanning
    [ 1.376062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.419617] ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
    [ 1.419622] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.421638] ata1.00: configured for UDMA/133
    [ 1.436238] scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5
    [ 1.436456] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 1.436505] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.436634] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.436638] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.436673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.436864] sda: sda1 sda2 < sda5 >
    [ 1.478871] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.843960] EXT4-fs (sda1): mounted filesystem with ordered data mode
    [ 5.928377] usb-storage: device scan complete
    [ 5.931714] scsi 4:0:0:0: CD-ROM PHILIPS SPD3400CC JP04 PQ: 0 ANSI: 0
    [ 5.935433] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 5.935439] Uniform CD-ROM driver Revision: 3.20
    [ 5.935588] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 5.935673] sr 4:0:0:0: Attached scsi generic sg1 type 5
    [ 9.318875] udev: starting version 151
    [ 9.403844] Adding 5923832k swap on /dev/sda5. Priority:-1 extents:1 across:5923832k
    [ 9.410788] lp: driver loaded but no devices found
    [ 9.560091] Linux agpgart interface v0.103
    [ 9.625877] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
    [ 9.626961] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
    [ 9.641125] sdhci: Secure Digital Host Controller Interface driver
    [ 9.641129] sdhci: Copyright(c) Pierre Ossman
    [ 9.643223] sdhci-pci 0000:06:00.0: SDHCI controller found [197b:2382] (rev 80)
    [ 9.643254] sdhci-pci 0000:06:00.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 9.643300] sdhci-pci 0000:06:00.0: setting latency timer to 64
    [ 9.643364] Registered led device: mmc0::
    [ 9.643414] mmc0: SDHCI controller on PCI [0000:06:00.0] using ADMA
    [ 9.667833] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 80)
    [ 9.667862] sdhci-pci 0000:06:00.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 9.667874] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
    [ 9.667885] sdhci-pci 0000:06:00.2: PCI INT B disabled
    [ 9.728285] jme: JMicron JMC2XX ethernet driver version 1.0.5
    [ 9.728342] jme 0000:06:00.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 9.728361] jme 0000:06:00.5: setting latency timer to 64
    [ 9.742714] eth0: JMC250 Gigabit Ethernet ver:23 rev:3 macaddr:00:90:f5:9d:95:a2
    [ 9.743550] [drm] Initialized drm 1.1.0 20060810
    [ 9.749189] jmb38x_ms 0000:06:00.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 9.749201] jmb38x_ms 0000:06:00.3: setting latency timer to 64
    [ 9.758860] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 9.890567] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 9.890577] i915 0000:00:02.0: setting latency timer to 64
    [ 9.901855] alloc irq_desc for 28 on node -1
    [ 9.901861] alloc kstat_irqs on node -1
    [ 9.901873] i915 0000:00:02.0: irq 28 for MSI/MSI-X
    [ 9.901882] [drm] set up 31M of stolen space
    [ 9.979881] type=1505 audit(1277757457.972:2): operation="profile_load" pid=636 name="/sbin/dhclient3"
    [ 9.980943] type=1505 audit(1277757457.976:3): operation="profile_load" pid=636 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [ 9.981506] type=1505 audit(1277757457.976:4): operation="profile_load" pid=636 name="/usr/lib/connman/scripts/dhclient-script"
    [ 10.115477] type=1505 audit(1277757458.108:5): operation="profile_load" pid=723 name="/usr/share/gdm/guest-session/Xsession"
    [ 10.122510] type=1505 audit(1277757458.116:6): operation="profile_replace" pid=726 name="/sbin/dhclient3"
    [ 10.125198] type=1505 audit(1277757458.120:7): operation="profile_replace" pid=726 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [ 10.127135] type=1505 audit(1277757458.120:: operation="profile_replace" pid=726 name="/usr/lib/connman/scripts/dhclient-script"
    [ 10.141593] type=1505 audit(1277757458.136:9): operation="profile_load" pid=730 name="/usr/bin/evince"
    [ 10.185730] type=1505 audit(1277757458.180:10): operation="profile_load" pid=730 name="/usr/bin/evince-previewer"
    [ 10.209938] type=1505 audit(1277757458.204:11): operation="profile_load" pid=730 name="/usr/bin/evince-thumbnailer"
    [ 10.312075] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa42000
    [ 10.344207] alloc irq_desc for 29 on node -1
    [ 10.344212] alloc kstat_irqs on node -1
    [ 10.344235] jme 0000:06:00.5: irq 29 for MSI/MSI-X
    [ 10.344315] eth0: Link is down.
    [ 10.344706] eth0: Link is down.
    [ 10.344990] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 10.348566] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
    [ 10.500278] fb0: inteldrmfb frame buffer device
    [ 10.500283] registered panic notifier
    [ 10.504492] acpi device:04: registered as cooling_device2
    [ 10.505344] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
    [ 10.505409] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 10.505448] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 10.505505] alloc irq_desc for 22 on node -1
    [ 10.505508] alloc kstat_irqs on node -1
    [ 10.505517] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 10.505564] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 10.509272] vga16fb: initializing
    [ 10.509277] vga16fb: mapped to 0xc00a0000
    [ 10.509282] vga16fb: not registering due to another framebuffer present
    [ 10.595690] vboxdrv: Trying to deactivate the NMI watchdog permanently...
    [ 10.595693] vboxdrv: Successfully done.
    [ 10.595696] vboxdrv: Found 2 processor cores.
    [ 10.596225] vboxdrv: fAsync=0 offMin=0x193 offMax=0x5e4
    [ 10.596923] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 10.596927] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
    [ 10.654400] hda_codec: ALC272: BIOS auto-probing.
    [ 10.655570] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 10.752060] ppdev: user-space parallel port driver
    [ 10.790608] Console: switching to colour frame buffer device 170x48
    [ 11.972677] eth0: Link is up at ANed: 100 Mbps, Full-Duplex, MDI.
    [ 11.975147] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 22.301018] eth0: no IPv6 routers present
    [ 23.439496] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 23.556556] ISOFS: changing to secondary root
    [ 114.393935] __ratelimit: 9 callbacks suppressed
    [ 114.393943] soffice.bin[1653]: segfault at 166a5e9 ip 0166a5e9 sp b3cff1a0 error 4 in libXcomposite.so.1.0.0[170c000+2000]
    [ 385.552159] usb 2-4: new high speed USB device using ehci_hcd and address 3
    [ 385.844424] usb 2-4: configuration #1 chosen from 1 choice
    [ 388.955010] cfg80211: Calling CRDA to update world regulatory domain
    [ 388.995415] cfg80211: World regulatory domain updated:
    [ 388.995419] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 388.995425] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 388.995429] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 388.995434] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 388.995438] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 388.995442] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 389.231129] phy0: Selected rate control algorithm 'minstrel'
    [ 389.232415] Registered led device: rt2500usb-phy0::radio
    [ 389.232445] Registered led device: rt2500usb-phy0::quality
    [ 389.233035] usbcore: registered new interface driver rt2500usb
    [ 389.538972] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 828.875595] usb 2-2: USB disconnect, address 2
    [ 834.508101] usb 6-2: new low speed USB device using uhci_hcd and address 2
    [ 834.662453] usb 6-2: configuration #1 chosen from 1 choice
    [ 834.729952] usbcore: registered new interface driver hiddev
    [ 834.742779] input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input9
    [ 834.742947] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.0-2/input0
    [ 834.742987] usbcore: registered new interface driver usbhid
    [ 834.742992] usbhid: v2.6:USB HID core driver


    Bye,
    Bruno

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •