Find the answer to your Linux question:
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 23
MY bad, you need to use sudo. Code: sudo dhclient wlan0...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864

    MY bad, you need to use sudo.
    Code:
    sudo dhclient wlan0
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  2. #12
    Just Joined!
    Join Date
    Jul 2010
    Posts
    13
    Code:
    matthew@MattsComputer:~$ sudo dhclient wlan0
    Internet Systems Consortium DHCP Client V3.1.3
    Copyright 2004-2009 Internet Systems Consortium.
    All rights reserved.
    
    Listening on LPF/wlan0/00:14:d1:5f:3c:a9
    Sending on   LPF/wlan0/00:14:d1:5f:3c:a9
    Sending on   Socket/fallback
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 11
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 18
    No DHCPOFFERS received.
    No working leases in persistent database - sleeping.

  3. #13
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Ok, so that's not working. Are you sure your password is correct? Lets try doing this all from the command line. I would try disabling the WPA security just to maximize your chances of connecting, if everything goes well, you can reset WPA back.
    Code:
    sudo ifconfig wlan0 up
    Code:
    sudo iwlist wlan0 scan
    Code:
    sudo iwconfig wlan0 essid BELL963 key YOUR_WEP_KEY_HERE_OR_"off"_FOR_NO_KEY
    Code:
    sudo dhclient wlan0
    Post any errors or output, if it still will not connect, then post the output of this command please.
    Code:
    tail -100 /var/log/messages
    And this one too
    Code:
    dmesg
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  4. #14
    Just Joined!
    Join Date
    Jul 2010
    Posts
    13
    I can't, or shouldn't change the security because my whole family uses this connection and it's up to my dad to change that, anyway.

    It still doesn't connect.

    Code:
    matthew@MattsComputer:~$ sudo ifconfig wlan0 up
    matthew@MattsComputer:~$ sudo iwlist wlan0 scan
    wlan0     Scan completed :
              Cell 01 - Address: B0:E7:54:6E:CB:D1
                        Channel:2
                        Frequency:2.417 GHz (Channel 2)
                        Quality=70/70  Signal level=35 dBm  
                        Encryption key:on
                        ESSID:"BELL963"
                        Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                                  11 Mb/s; 12 Mb/s; 18 Mb/s
                        Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                        Mode:Master
                        Extra:tsf=000000d09df01844
                        Extra: Last beacon: 716ms ago
                        IE: Unknown: 000742454C4C393633
                        IE: Unknown: 010882848B0C12961824
                        IE: Unknown: 030102
                        IE: Unknown: 0706555320010B1B
                        IE: IEEE 802.11i/WPA2 Version 1
                            Group Cipher : TKIP
                            Pairwise Ciphers (2) : CCMP TKIP
                            Authentication Suites (1) : PSK
                        IE: WPA Version 1
                            Group Cipher : TKIP
                            Pairwise Ciphers (2) : CCMP TKIP
                            Authentication Suites (1) : PSK
                        IE: Unknown: 2A0100
                        IE: Unknown: 32043048606C
    
    matthew@MattsComputer:~$ sudo iwconfig wlan0 essid BELL963 key ********
    Error for wireless request "Set Encode" (8B2A) :
        invalid argument "********". (I'm guessing this is since it's not set to WEP.)
    matthew@MattsComputer:~$ sudo dhclient wlan0
    There is already a pid file /var/run/dhclient.pid with pid 1489
    killed old client process, removed PID file
    Internet Systems Consortium DHCP Client V3.1.3
    Copyright 2004-2009 Internet Systems Consortium.
    All rights reserved.
    
    Listening on LPF/wlan0/00:14:d1:5f:3c:a9
    Sending on   LPF/wlan0/00:14:d1:5f:3c:a9
    Sending on   Socket/fallback
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 16
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
    No DHCPOFFERS received.
    No working leases in persistent database - sleeping.
    Code:
    matthew@MattsComputer:~$ tail -100 /var/log/messages
    Aug  2 21:31:00 MattsComputer kernel: [   12.306131] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    Aug  2 21:31:00 MattsComputer kernel: [   12.306134] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    Aug  2 21:31:00 MattsComputer kernel: [   12.306138] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Aug  2 21:31:00 MattsComputer kernel: [   12.306141] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Aug  2 21:31:00 MattsComputer kernel: [   12.330281] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    Aug  2 21:31:00 MattsComputer kernel: [   12.361064] dell-wmi: No known WMI GUID found
    Aug  2 21:31:00 MattsComputer kernel: [   12.405026] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    Aug  2 21:31:00 MattsComputer kernel: [   12.405186] logitech 0003:046D:C218.0001: input,hidraw3: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.0-2/input0
    Aug  2 21:31:00 MattsComputer kernel: [   12.405200] logitech 0003:046D:C218.0001: Force feedback for Logitech Rumblepad 2 by Anssi Hannula <anssi.hannula@gmail.com>
    Aug  2 21:31:00 MattsComputer kernel: [   12.551376] nouveau 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Aug  2 21:31:00 MattsComputer kernel: [   12.578592] [drm] nouveau 0000:03:01.0: Detected an NV40 generation card (0x04a100a1)
    Aug  2 21:31:00 MattsComputer kernel: [   12.579140] [drm] nouveau 0000:03:01.0: Attempting to load BIOS image from PROM
    Aug  2 21:31:00 MattsComputer kernel: [   13.170406] [drm] nouveau 0000:03:01.0: ... appears to be valid
    Aug  2 21:31:00 MattsComputer kernel: [   13.170412] [drm] nouveau 0000:03:01.0: BIT BIOS found
    Aug  2 21:31:00 MattsComputer kernel: [   13.170415] [drm] nouveau 0000:03:01.0: Bios version 05.44.a2.10
    Aug  2 21:31:00 MattsComputer kernel: [   13.170420] [drm] nouveau 0000:03:01.0: BIT table 'd' not found
    Aug  2 21:31:00 MattsComputer kernel: [   13.170423] [drm] nouveau 0000:03:01.0: Found Display Configuration Block version 3.0
    Aug  2 21:31:00 MattsComputer kernel: [   13.170428] [drm] nouveau 0000:03:01.0: DCB connector table: VHER 0x30 5 7 2
    Aug  2 21:31:00 MattsComputer kernel: [   13.170432] [drm] nouveau 0000:03:01.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
    Aug  2 21:31:00 MattsComputer kernel: [   13.170436] [drm] nouveau 0000:03:01.0:   1: 0x00002230: type 0x30 idx 2 tag 0x08
    Aug  2 21:31:00 MattsComputer kernel: [   13.170440] [drm] nouveau 0000:03:01.0:   2: 0x00000110: type 0x10 idx 1 tag 0xff
    Aug  2 21:31:00 MattsComputer kernel: [   13.170443] [drm] nouveau 0000:03:01.0:   3: 0x00000111: type 0x11 idx 1 tag 0xff
    Aug  2 21:31:00 MattsComputer kernel: [   13.170446] [drm] nouveau 0000:03:01.0:   4: 0x00000113: type 0x13 idx 1 tag 0xff
    Aug  2 21:31:00 MattsComputer kernel: [   13.170450] [drm] nouveau 0000:03:01.0: Raw DCB entry 0: 01000300 00000028
    Aug  2 21:31:00 MattsComputer kernel: [   13.170454] [drm] nouveau 0000:03:01.0: Raw DCB entry 1: 01000302 00000020
    Aug  2 21:31:00 MattsComputer kernel: [   13.170457] [drm] nouveau 0000:03:01.0: Raw DCB entry 2: 02011310 00000028
    Aug  2 21:31:00 MattsComputer kernel: [   13.170460] [drm] nouveau 0000:03:01.0: Raw DCB entry 3: 020223f1 00c0c030
    Aug  2 21:31:00 MattsComputer kernel: [   13.170470] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 0 at offset 0xDEB0
    Aug  2 21:31:00 MattsComputer kernel: [   13.278859] Registered led device: rt2800usb-phy0::radio
    Aug  2 21:31:00 MattsComputer kernel: [   13.278883] Registered led device: rt2800usb-phy0::assoc
    Aug  2 21:31:00 MattsComputer kernel: [   13.278908] Registered led device: rt2800usb-phy0::quality
    Aug  2 21:31:00 MattsComputer kernel: [   13.279446] usbcore: registered new interface driver rt2800usb
    Aug  2 21:31:00 MattsComputer kernel: [   13.283285] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
    Aug  2 21:31:00 MattsComputer kernel: [   13.301674] rtusb init --->
    Aug  2 21:31:00 MattsComputer kernel: [   13.301774] usbcore: registered new interface driver rt2870
    Aug  2 21:31:00 MattsComputer kernel: [   13.330497] type=1505 audit(1280799060.765:5):  operation="profile_load" pid=666 name="/usr/share/gdm/guest-session/Xsession"
    Aug  2 21:31:00 MattsComputer kernel: [   13.357135] type=1505 audit(1280799060.793:6):  operation="profile_replace" pid=671 name="/sbin/dhclient3"
    Aug  2 21:31:00 MattsComputer kernel: [   13.357888] type=1505 audit(1280799060.793:7):  operation="profile_replace" pid=671 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    Aug  2 21:31:00 MattsComputer kernel: [   13.358290] type=1505 audit(1280799060.793:8):  operation="profile_replace" pid=671 name="/usr/lib/connman/scripts/dhclient-script"
    Aug  2 21:31:00 MattsComputer kernel: [   13.366666] type=1505 audit(1280799060.801:9):  operation="profile_load" pid=674 name="/usr/bin/evince"
    Aug  2 21:31:00 MattsComputer kernel: [   13.395232] type=1505 audit(1280799060.829:10):  operation="profile_load" pid=674 name="/usr/bin/evince-previewer"
    Aug  2 21:31:00 MattsComputer kernel: [   13.434955] type=1505 audit(1280799060.869:11):  operation="profile_load" pid=674 name="/usr/bin/evince-thumbnailer"
    Aug  2 21:31:00 MattsComputer kernel: [   13.466873] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Aug  2 21:31:00 MattsComputer kernel: [   13.492842] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 1 at offset 0xE19E
    Aug  2 21:31:00 MattsComputer kernel: [   13.552230] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 2 at offset 0xE6D8
    Aug  2 21:31:00 MattsComputer kernel: [   13.552268] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 3 at offset 0xE835
    Aug  2 21:31:00 MattsComputer kernel: [   13.553032] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    Aug  2 21:31:00 MattsComputer kernel: [   13.553327] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    Aug  2 21:31:00 MattsComputer kernel: [   13.553582] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    Aug  2 21:31:00 MattsComputer kernel: [   13.553833] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    Aug  2 21:31:01 MattsComputer kernel: [   13.560853] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 4 at offset 0xE9BE
    Aug  2 21:31:01 MattsComputer kernel: [   13.672759] [TTM] Zone  kernel: Available graphics memory: 249672 kiB.
    Aug  2 21:31:01 MattsComputer kernel: [   13.672776] [drm] nouveau 0000:03:01.0: 256 MiB VRAM
    Aug  2 21:31:01 MattsComputer kernel: [   13.676810] [drm] nouveau 0000:03:01.0: 64 MiB GART (aperture)
    Aug  2 21:31:01 MattsComputer kernel: [   13.680290] [drm] nouveau 0000:03:01.0: Allocating FIFO number 0
    Aug  2 21:31:01 MattsComputer kernel: [   13.690332] [drm] nouveau 0000:03:01.0: nouveau_channel_alloc: initialised FIFO 0
    Aug  2 21:31:01 MattsComputer kernel: [   13.690348] [drm] nouveau 0000:03:01.0: Initial CRTC_OWNER is 0
    Aug  2 21:31:01 MattsComputer kernel: [   13.690361] [drm] nouveau 0000:03:01.0: Saving VGA fonts
    Aug  2 21:31:01 MattsComputer kernel: [   13.830299] [drm] nouveau 0000:03:01.0: Detected a DVI-I connector
    Aug  2 21:31:01 MattsComputer kernel: [   13.830601] [drm] nouveau 0000:03:01.0: Detected a VGA connector
    Aug  2 21:31:01 MattsComputer kernel: [   13.830803] [drm] nouveau 0000:03:01.0: Detected a TV connector
    Aug  2 21:31:01 MattsComputer kernel: [   13.834519] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on vga encoder (output 0)
    Aug  2 21:31:01 MattsComputer kernel: [   13.834525] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on tmds encoder (output 1)
    Aug  2 21:31:01 MattsComputer kernel: [   13.834529] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on vga encoder (output 2)
    Aug  2 21:31:01 MattsComputer kernel: [   13.834534] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on TV encoder (output 3)
    Aug  2 21:31:01 MattsComputer kernel: [   14.018696] rt2800usb 1-6:1.0: firmware: requesting rt2870.bin
    Aug  2 21:31:01 MattsComputer kernel: [   14.032307] [drm] nouveau 0000:03:01.0: allocated 1280x1024 fb: 0x49000, bo d7282000
    Aug  2 21:31:01 MattsComputer kernel: [   14.032423] fb0: nouveaufb frame buffer device
    Aug  2 21:31:01 MattsComputer kernel: [   14.032426] registered panic notifier
    Aug  2 21:31:01 MattsComputer kernel: [   14.032434] [drm] Initialized nouveau 0.0.15 20090420 for 0000:03:01.0 on minor 0
    Aug  2 21:31:01 MattsComputer kernel: [   14.034878] vga16fb: mapped to 0xc00a0000
    Aug  2 21:31:01 MattsComputer kernel: [   14.034882] vga16fb: not registering due to another framebuffer present
    Aug  2 21:31:01 MattsComputer kernel: [   14.097658] [drm] nouveau 0000:03:01.0: Setting dpms mode 0 on vga encoder (output 2)
    Aug  2 21:31:01 MattsComputer kernel: [   14.097666] [drm] nouveau 0000:03:01.0: Output VGA-1 is running on CRTC 0 using output B
    Aug  2 21:31:01 MattsComputer kernel: [   14.125907] Console: switching to colour frame buffer device 160x64
    Aug  2 21:31:01 MattsComputer kernel: [   14.268209] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Aug  2 21:31:01 MattsComputer kernel: [   14.289900] ADDRCONF(NETDEV_UP): eth0: link is not ready
    Aug  2 21:31:01 MattsComputer kernel: [   14.549807] ppdev: user-space parallel port driver
    Aug  2 21:31:02 MattsComputer kernel: [   15.362946] [drm] nouveau 0000:03:01.0: Allocating FIFO number 1
    Aug  2 21:31:02 MattsComputer kernel: [   15.365305] [drm] nouveau 0000:03:01.0: nouveau_channel_alloc: initialised FIFO 1
    Aug  2 21:31:21 MattsComputer kernel: [   34.321794] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Aug  2 21:31:21 MattsComputer kernel: [   34.321866] cfg80211: Calling CRDA for country: US
    Aug  2 21:31:21 MattsComputer kernel: [   34.338524] cfg80211: Regulatory domain: US
    Aug  2 21:31:21 MattsComputer kernel: [   34.338526] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338530] 	(2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338535] cfg80211: Regulatory domain: US
    Aug  2 21:31:21 MattsComputer kernel: [   34.338537] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338541] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338544] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338547] 	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338550] 	(5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338554] 	(5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338557] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338562] cfg80211: Regulatory domain: 98
    Aug  2 21:31:21 MattsComputer kernel: [   34.338563] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338567] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338584] cfg80211: Current regulatory domain updated by AP to: US
    Aug  2 21:31:21 MattsComputer kernel: [   34.338586] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    Aug  2 21:31:21 MattsComputer kernel: [   34.338589] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    Aug  2 21:31:21 MattsComputer kernel: [   34.536783] padlock: VIA PadLock not detected.
    
    
    [    0.685473] Trying to unpack rootfs image as initramfs...
    [    0.696305] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.704166] VFS: Disk quotas dquot_6.5.2
    [    0.704251] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.705026] fuse init (API version 7.13)
    [    0.705145] msgmni has been set to 958
    [    0.705396] alg: No test for stdrng (krng)
    [    0.705474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.705479] io scheduler noop registered
    [    0.705481] io scheduler anticipatory registered
    [    0.705484] io scheduler deadline registered
    [    0.705538] io scheduler cfq registered (default)
    [    0.705698]   alloc irq_desc for 24 on node -1
    [    0.705702]   alloc kstat_irqs on node -1
    [    0.705716] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [    0.705727] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.705875]   alloc irq_desc for 25 on node -1
    [    0.705878]   alloc kstat_irqs on node -1
    [    0.705887] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [    0.705896] pcieport 0000:00:1c.1: setting latency timer to 64
    [    0.705999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.706077] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.706188] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [    0.706198] ACPI: Power Button [VBTN]
    [    0.706268] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.706273] ACPI: Power Button [PWRF]
    [    0.706720] processor LNXCPU:00: registered as cooling_device0
    [    0.780111] isapnp: Scanning for PnP cards...
    [    0.787656] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.789345] brd: module loaded
    [    0.789981] loop: module loaded
    [    0.790096] input: Macintosh mouse button emulation as /devices/virtual/input/input2
    [    0.790219] ata_piix 0000:00:1f.1: version 2.13
    [    0.790236] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.790286] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    0.796011] scsi0 : ata_piix
    [    0.839613] scsi1 : ata_piix
    [    0.839664] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [    0.839669] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [    0.839718]   alloc irq_desc for 20 on node -1
    [    0.839721]   alloc kstat_irqs on node -1
    [    0.839730] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
    [    0.839751] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [    0.839980] ata2: port disabled. ignoring.
    [    1.011555] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    1.016613] ata1.00: ATAPI: PHILIPS DVD+/-RW DVD8801, 4D28, max UDMA/33
    [    1.016802] scsi2 : ata_piix
    [    1.016910] scsi3 : ata_piix
    [    1.016959] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
    [    1.016963] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
    [    1.017533] Fixed MDIO Bus: probed
    [    1.017581] PPP generic driver version 2.4.2
    [    1.017654] tun: Universal TUN/TAP device driver, 1.6
    [    1.017657] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    1.017779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.017805]   alloc irq_desc for 21 on node -1
    [    1.017808]   alloc kstat_irqs on node -1
    [    1.017817] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [    1.017837] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    1.017842] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    1.017886] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    1.017918] ehci_hcd 0000:00:1d.7: debug port 1
    [    1.021813] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
    [    1.024293] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
    [    1.032824] ata1.00: configured for UDMA/33
    [    1.044083] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    1.044233] usb usb1: configuration #1 chosen from 1 choice
    [    1.044274] hub 1-0:1.0: USB hub found
    [    1.044287] hub 1-0:1.0: 8 ports detected
    [    1.044368] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.044390] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.044440] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [    1.044454] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    1.044458] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    1.044511] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    1.044540] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
    [    1.044648] usb usb2: configuration #1 chosen from 1 choice
    [    1.044684] hub 2-0:1.0: USB hub found
    [    1.044694] hub 2-0:1.0: 2 ports detected
    [    1.044754]   alloc irq_desc for 22 on node -1
    [    1.044757]   alloc kstat_irqs on node -1
    [    1.044765] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    [    1.044773] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    1.044778] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    1.044823] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    1.044857] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
    [    1.044964] usb usb3: configuration #1 chosen from 1 choice
    [    1.044999] hub 3-0:1.0: USB hub found
    [    1.045008] hub 3-0:1.0: 2 ports detected
    [    1.045063]   alloc irq_desc for 18 on node -1
    [    1.045066]   alloc kstat_irqs on node -1
    [    1.045071] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    1.045079] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    1.045083] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    1.045125] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    1.045160] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
    [    1.045266] usb usb4: configuration #1 chosen from 1 choice
    [    1.045302] hub 4-0:1.0: USB hub found
    [    1.045311] hub 4-0:1.0: 2 ports detected
    [    1.045365]   alloc irq_desc for 23 on node -1
    [    1.045369]   alloc kstat_irqs on node -1
    [    1.045375] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [    1.045382] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    1.045386] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    1.045428] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    1.045461] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
    [    1.045565] usb usb5: configuration #1 chosen from 1 choice
    [    1.045600] hub 5-0:1.0: USB hub found
    [    1.045610] hub 5-0:1.0: 2 ports detected
    [    1.045738] PNP: No PS/2 controller found. Probing ports directly.
    [    1.053461] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.053472] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    1.053675] mice: PS/2 mouse device common for all mice
    [    1.053843] rtc_cmos 00:05: RTC can wake from S4
    [    1.053901] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    1.053929] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
    [    1.054081] device-mapper: uevent: version 1.0.3
    [    1.054215] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    1.056026] device-mapper: multipath: version 1.1.0 loaded
    [    1.056030] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    1.056201] EISA: Probing bus 0 at eisa.0
    [    1.056207] EISA: Cannot allocate resource for mainboard
    [    1.056211] Cannot allocate resource for EISA slot 1
    [    1.056213] Cannot allocate resource for EISA slot 2
    [    1.056223] Cannot allocate resource for EISA slot 5
    [    1.056226] Cannot allocate resource for EISA slot 6
    [    1.056236] EISA: Detected 0 cards.
    [    1.060369] cpuidle: using governor ladder
    [    1.060373] cpuidle: using governor menu
    [    1.060934] TCP cubic registered
    [    1.061105] NET: Registered protocol family 10
    [    1.061684] lo: Disabled Privacy Extensions
    [    1.062072] NET: Registered protocol family 17
    [    1.062143] Using IPI No-Shortcut mode
    [    1.062266] PM: Resume from disk failed.
    [    1.062281] registered taskstats version 1
    [    1.062594]   Magic number: 6:866:549
    [    1.062641] pci_link PNP0C0F:00: hash matches
    [    1.062678] rtc_cmos 00:05: setting system clock to 2010-08-02 21:30:48 UTC (1280784648)
    [    1.062682] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.062684] EDD information not available.
    [    1.219039] ata3.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
    [    1.219045] ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
    [    1.224414] ata3.00: configured for UDMA/133
    [    1.237894] Freeing initrd memory: 7772k freed
    [    1.372524] isapnp: No Plug & Play device found
    [    1.374717] scsi 0:0:0:0: CD-ROM            PHILIPS  DVD+-RW DVD8801  4D28 PQ: 0 ANSI: 5
    [    1.383324] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [    1.383329] Uniform CD-ROM driver Revision: 3.20
    [    1.383459] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.383545] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.383718] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ/ ZM10 PQ: 0 ANSI: 5
    [    1.383868] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [    1.383971] sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
    [    1.384051] sd 2:0:0:0: [sda] Write Protect is off
    [    1.384055] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.384091] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.384272]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    [    1.436351] sd 2:0:0:0: [sda] Attached SCSI disk
    [    1.436368] Freeing unused kernel memory: 656k freed
    [    1.436775] Write protecting the kernel text: 4676k
    [    1.436808] Write protecting the kernel read-only data: 1840k
    [    1.458674] udev: starting version 151
    [    1.652071] usb 1-5: new high speed USB device using ehci_hcd and address 5
    [    1.672089] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [    1.672093] e100: Copyright(c) 1999-2006 Intel Corporation
    [    1.672140] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    1.696665] e100 0000:03:08.0: PME# disabled
    [    1.698707] e100: eth0: e100_probe: addr 0xdfbef000, irq 20, MAC addr 00:16:76:43:d9:e7
    [    1.786230] usb 1-5: configuration #1 chosen from 1 choice
    [    1.796236] Initializing USB Mass Storage driver...
    [    1.796364] scsi4 : SCSI emulation for USB Mass Storage devices
    [    1.796552] usbcore: registered new interface driver usb-storage
    [    1.796557] USB Mass Storage support registered.
    [    1.796985] usb-storage: device found at 5
    [    1.796988] usb-storage: waiting for device to settle before scanning
    [    1.896039] usb 1-6: new high speed USB device using ehci_hcd and address 6
    [    2.044221] usb 1-6: configuration #1 chosen from 1 choice
    [    2.049761] EXT4-fs (sda5): mounted filesystem with ordered data mode
    [    2.284020] usb 2-2: new low speed USB device using uhci_hcd and address 2
    [    2.462868] usb 2-2: configuration #1 chosen from 1 choice
    [    2.704021] usb 3-1: new full speed USB device using uhci_hcd and address 2
    [    2.874230] usb 3-1: configuration #1 chosen from 1 choice
    [    2.882137] hub 3-1:1.0: USB hub found
    [    2.883114] hub 3-1:1.0: 3 ports detected
    [    3.128042] usb 3-2: new low speed USB device using uhci_hcd and address 3
    [    3.296288] usb 3-2: configuration #1 chosen from 1 choice
    [    3.373176] usb 3-1.1: new full speed USB device using uhci_hcd and address 4
    [    3.508304] usb 3-1.1: configuration #1 chosen from 1 choice
    [    6.796199] usb-storage: device scan complete
    [    6.796808] scsi 4:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
    [    6.797400] sd 4:0:0:0: Attached scsi generic sg2 type 0
    [    6.798664] sd 4:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
    [    6.799159] sd 4:0:0:0: [sdb] Write Protect is off
    [    6.799163] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
    [    6.799166] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [    7.173204] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [    7.173209]  sdb: sdb1
    [    7.175076] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [    7.175081] sd 4:0:0:0: [sdb] Attached SCSI removable disk
    [   11.525073] udev: starting version 151
    [   11.548416] Adding 248824k swap on /dev/sda6.  Priority:-1 extents:1 across:248824k 
    [   11.770642] lp: driver loaded but no devices found
    [   11.828517] intel_rng: Firmware space is locked read-only. If you can't or
    [   11.828520] intel_rng: don't want to disable this in firmware setup, and if
    [   11.828522] intel_rng: you are certain that your system has a functional
    [   11.828524] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [   11.839082] Linux agpgart interface v0.103
    [   12.051957] usbcore: registered new interface driver hiddev
    [   12.065738] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
    [   12.065889] generic-usb 0003:0461:4D15.0002: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
    [   12.069796] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input4
    [   12.069916] generic-usb 0003:413C:2010.0003: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.1/input0
    [   12.074353] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input5
    [   12.074484] generic-usb 0003:413C:2010.0004: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.1/input1
    [   12.074521] usbcore: registered new interface driver usbhid
    [   12.074526] usbhid: v2.6:USB HID core driver
    [   12.160861] [drm] Initialized drm 1.1.0 20060810
    [   12.218022] cfg80211: Calling CRDA to update world regulatory domain
    [   12.231428] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [   12.231554] agpgart-intel 0000:00:00.0: Intel 915G Chipset
    [   12.231836] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    [   12.269456] type=1505 audit(1280799059.705:2):  operation="profile_load" pid=513 name="/sbin/dhclient3"
    [   12.270192] type=1505 audit(1280799059.705:3):  operation="profile_load" pid=513 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   12.270586] type=1505 audit(1280799059.705:4):  operation="profile_load" pid=513 name="/usr/lib/connman/scripts/dhclient-script"
    [   12.306116] cfg80211: World regulatory domain updated:
    [   12.306121] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   12.306126] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.306131] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   12.306134] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   12.306138] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.306141] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.330281] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [   12.361064] dell-wmi: No known WMI GUID found
    [   12.405026] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    [   12.405186] logitech 0003:046D:C218.0001: input,hidraw3: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.0-2/input0
    [   12.405200] logitech 0003:046D:C218.0001: Force feedback for Logitech Rumblepad 2 by Anssi Hannula <anssi.hannula@gmail.com>
    [   12.551376] nouveau 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [   12.578592] [drm] nouveau 0000:03:01.0: Detected an NV40 generation card (0x04a100a1)
    [   12.579140] [drm] nouveau 0000:03:01.0: Attempting to load BIOS image from PROM
    [   13.170406] [drm] nouveau 0000:03:01.0: ... appears to be valid
    [   13.170412] [drm] nouveau 0000:03:01.0: BIT BIOS found
    [   13.170415] [drm] nouveau 0000:03:01.0: Bios version 05.44.a2.10
    [   13.170420] [drm] nouveau 0000:03:01.0: BIT table 'd' not found
    [   13.170423] [drm] nouveau 0000:03:01.0: Found Display Configuration Block version 3.0
    [   13.170428] [drm] nouveau 0000:03:01.0: DCB connector table: VHER 0x30 5 7 2
    [   13.170432] [drm] nouveau 0000:03:01.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
    [   13.170436] [drm] nouveau 0000:03:01.0:   1: 0x00002230: type 0x30 idx 2 tag 0x08
    [   13.170440] [drm] nouveau 0000:03:01.0:   2: 0x00000110: type 0x10 idx 1 tag 0xff
    [   13.170443] [drm] nouveau 0000:03:01.0:   3: 0x00000111: type 0x11 idx 1 tag 0xff
    [   13.170446] [drm] nouveau 0000:03:01.0:   4: 0x00000113: type 0x13 idx 1 tag 0xff
    [   13.170450] [drm] nouveau 0000:03:01.0: Raw DCB entry 0: 01000300 00000028
    [   13.170454] [drm] nouveau 0000:03:01.0: Raw DCB entry 1: 01000302 00000020
    [   13.170457] [drm] nouveau 0000:03:01.0: Raw DCB entry 2: 02011310 00000028
    [   13.170460] [drm] nouveau 0000:03:01.0: Raw DCB entry 3: 020223f1 00c0c030
    [   13.170470] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 0 at offset 0xDEB0
    [   13.277935] phy0: Selected rate control algorithm 'minstrel'
    [   13.278859] Registered led device: rt2800usb-phy0::radio
    [   13.278883] Registered led device: rt2800usb-phy0::assoc
    [   13.278908] Registered led device: rt2800usb-phy0::quality
    [   13.279446] usbcore: registered new interface driver rt2800usb
    [   13.283285] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
    [   13.301674] rtusb init --->
    [   13.301774] usbcore: registered new interface driver rt2870
    [   13.330497] type=1505 audit(1280799060.765:5):  operation="profile_load" pid=666 name="/usr/share/gdm/guest-session/Xsession"
    [   13.357135] type=1505 audit(1280799060.793:6):  operation="profile_replace" pid=671 name="/sbin/dhclient3"
    [   13.357888] type=1505 audit(1280799060.793:7):  operation="profile_replace" pid=671 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   13.358290] type=1505 audit(1280799060.793:8):  operation="profile_replace" pid=671 name="/usr/lib/connman/scripts/dhclient-script"
    [   13.366666] type=1505 audit(1280799060.801:9):  operation="profile_load" pid=674 name="/usr/bin/evince"
    [   13.395232] type=1505 audit(1280799060.829:10):  operation="profile_load" pid=674 name="/usr/bin/evince-previewer"
    [   13.434955] type=1505 audit(1280799060.869:11):  operation="profile_load" pid=674 name="/usr/bin/evince-thumbnailer"
    [   13.466873] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   13.466922] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   13.492842] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 1 at offset 0xE19E
    [   13.552230] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 2 at offset 0xE6D8
    [   13.552268] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 3 at offset 0xE835
    [   13.553032] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [   13.553327] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   13.553582] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   13.553833] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [   13.560853] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 4 at offset 0xE9BE
    [   13.672759] [TTM] Zone  kernel: Available graphics memory: 249672 kiB.
    [   13.672776] [drm] nouveau 0000:03:01.0: 256 MiB VRAM
    [   13.676810] [drm] nouveau 0000:03:01.0: 64 MiB GART (aperture)
    [   13.680290] [drm] nouveau 0000:03:01.0: Allocating FIFO number 0
    [   13.690332] [drm] nouveau 0000:03:01.0: nouveau_channel_alloc: initialised FIFO 0
    [   13.690348] [drm] nouveau 0000:03:01.0: Initial CRTC_OWNER is 0
    [   13.690361] [drm] nouveau 0000:03:01.0: Saving VGA fonts
    [   13.830299] [drm] nouveau 0000:03:01.0: Detected a DVI-I connector
    [   13.830601] [drm] nouveau 0000:03:01.0: Detected a VGA connector
    [   13.830803] [drm] nouveau 0000:03:01.0: Detected a TV connector
    [   13.834519] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on vga encoder (output 0)
    [   13.834525] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on tmds encoder (output 1)
    [   13.834529] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on vga encoder (output 2)
    [   13.834534] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on TV encoder (output 3)
    [   14.018696] rt2800usb 1-6:1.0: firmware: requesting rt2870.bin
    [   14.032307] [drm] nouveau 0000:03:01.0: allocated 1280x1024 fb: 0x49000, bo d7282000
    [   14.032423] fb0: nouveaufb frame buffer device
    [   14.032426] registered panic notifier
    [   14.032434] [drm] Initialized nouveau 0.0.15 20090420 for 0000:03:01.0 on minor 0
    [   14.034873] vga16fb: initializing
    [   14.034878] vga16fb: mapped to 0xc00a0000
    [   14.034882] vga16fb: not registering due to another framebuffer present
    [   14.097658] [drm] nouveau 0000:03:01.0: Setting dpms mode 0 on vga encoder (output 2)
    [   14.097666] [drm] nouveau 0000:03:01.0: Output VGA-1 is running on CRTC 0 using output B
    [   14.125907] Console: switching to colour frame buffer device 160x64
    [   14.268209] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   14.289900] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.549807] ppdev: user-space parallel port driver
    [   14.948198] CPU0 attaching NULL sched-domain.
    [   14.948281] CPU0 attaching NULL sched-domain.
    [   15.362946] [drm] nouveau 0000:03:01.0: Allocating FIFO number 1
    [   15.365305] [drm] nouveau 0000:03:01.0: nouveau_channel_alloc: initialised FIFO 1
    [   17.853772] CPU0 attaching NULL sched-domain.
    [   17.853858] CPU0 attaching NULL sched-domain.
    [   34.300774] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [   34.303541] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [   34.306644] wlan0: direct probe responded
    [   34.306650] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [   34.308579] wlan0: authenticated
    [   34.308803] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [   34.310631] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [   34.310637] wlan0: associated
    [   34.321794] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   34.321866] cfg80211: Calling CRDA for country: US
    [   34.338519] cfg80211: Received country IE:
    [   34.338524] cfg80211: Regulatory domain: US
    [   34.338526] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   34.338530] 	(2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
    [   34.338533] cfg80211: CRDA thinks this should applied:
    [   34.338535] cfg80211: Regulatory domain: US
    [   34.338537] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   34.338541] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   34.338544] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
    [   34.338547] 	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   34.338550] 	(5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   34.338554] 	(5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   34.338557] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
    [   34.338559] cfg80211: We intersect both of these and get:
    [   34.338562] cfg80211: Regulatory domain: 98
    [   34.338563] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   34.338567] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   34.338573] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE
    [   34.338576] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE
    [   34.338579] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE
    [   34.338584] cfg80211: Current regulatory domain updated by AP to: US
    [   34.338586] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   34.338589] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   34.536783] padlock: VIA PadLock not detected.
    [   44.860012] wlan0: no IPv6 routers present
    [   79.787721] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [  132.949351] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [  132.953121] wlan0: direct probe responded
    [  132.953126] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  132.956124] wlan0: authenticated
    [  132.956266] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  132.958769] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [  132.958774] wlan0: associated
    [  132.995648] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [  148.756569] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [  148.760710] wlan0: direct probe responded
    [  148.760714] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  148.762550] wlan0: authenticated
    [  148.762580] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  148.764669] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [  148.764675] wlan0: associated
    [  148.802989] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [  158.872747] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [  158.877138] wlan0: direct probe responded
    [  158.877143] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  158.880101] wlan0: authenticated
    [  158.880247] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  158.882769] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [  158.882774] wlan0: associated
    [  158.918665] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [  218.958796] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [  219.148777] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [  219.152664] wlan0: direct probe responded
    [  219.152669] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  219.154520] wlan0: authenticated
    [  219.154540] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  219.156405] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [  219.156409] wlan0: associated
    [  264.783284] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [  381.992618] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [  381.997260] wlan0: direct probe responded
    [  381.997264] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  381.999340] wlan0: authenticated
    [  381.999370] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  382.002665] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [  382.002671] wlan0: associated
    [  382.050916] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [  389.928667] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [  389.932310] wlan0: direct probe responded
    [  389.932314] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  389.933791] wlan0: authenticated
    [  389.933813] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  389.937694] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [  389.937700] wlan0: associated
    [  389.986465] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [  394.688403] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [  394.896754] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [  394.901140] wlan0: direct probe responded
    [  394.901144] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  394.902872] wlan0: authenticated
    [  394.902894] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [  394.904882] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [  394.904886] wlan0: associated
    [  440.785156] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [ 1027.396564] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [ 1027.400580] wlan0: direct probe responded
    [ 1027.400585] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [ 1027.402836] wlan0: authenticated
    [ 1027.402867] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [ 1027.404715] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [ 1027.404721] wlan0: associated
    [ 1027.443611] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000001f688c00 (usable)
    [    0.000000]  BIOS-e820: 000000001f688c00 - 000000001f68ac00 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000001f68ac00 - 000000001f68cc00 (ACPI data)
    [    0.000000]  BIOS-e820: 000000001f68cc00 - 0000000020000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000] DMI 2.3 present.
    [    0.000000] last_pfn = 0x1f688 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FE0000000 write-back
    [    0.000000]   1 base 01F800000 mask FFF800000 uncachable
    [    0.000000]   2 base 01F700000 mask FFFF00000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
    [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
    [    0.000000]  modified: 0000000000006000 - 00000000000a0000 (usable)
    [    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 000000001f688c00 (usable)
    [    0.000000]  modified: 000000001f688c00 - 000000001f68ac00 (ACPI NVS)
    [    0.000000]  modified: 000000001f68ac00 - 000000001f68cc00 (ACPI data)
    [    0.000000]  modified: 000000001f68cc00 - 0000000020000000 (reserved)
    [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  modified: 00000000fec00000 - 00000000fed00400 (reserved)
    [    0.000000]  modified: 00000000fed20000 - 00000000feda0000 (reserved)
    [    0.000000]  modified: 00000000fee00000 - 00000000fef00000 (reserved)
    [    0.000000]  modified: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000] initial memory mapped : 0 - 00c00000
    [    0.000000] init_memory_mapping: 0000000000000000-000000001f688000
    [    0.000000] Using x86 segment limits to approximate NX protection
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 001f400000 page 2M
    [    0.000000]  001f400000 - 001f688000 page 4k
    [    0.000000] kernel direct mapping tables up to 1f688000 @ 7000-c000
    [    0.000000] RAMDISK: 1718f000 - 17926306
    [    0.000000] ACPI: RSDP 000fec00 00014 (v00 DELL  )
    [    0.000000] ACPI: RSDT 000fcc50 0003C (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: FACP 000fcc8c 00074 (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: DSDT fffc56f3 02D5F (v01   DELL    dt_ex 00001000 MSFT 0100000D)
    [    0.000000] ACPI: FACS 1f688c00 00040
    [    0.000000] ACPI: SSDT fffc858f 000BA (v01   DELL    st_ex 00001000 MSFT 0100000D)
    [    0.000000] ACPI: APIC 000fcd00 00092 (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: BOOT 000fcd92 00028 (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: MCFG 000fcdba 0003E (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: HPET 000fcdf8 00038 (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 502MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 1f688000
    [    0.000000]   low ram: 0 - 1f688000
    [    0.000000]   node 0 low ram: 00000000 - 1f688000
    [    0.000000]   node 0 bootmap 00008000 - 0000bed4
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001f688000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
    [    0.000000]   #4 [001718f000 - 0017926306]          RAMDISK ==> [001718f000 - 0017926306]
    [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
    [    0.000000]   #6 [00008da000 - 00008dd198]              BRK ==> [00008da000 - 00008dd198]
    [    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
    [    0.000000]   #8 [0000008000 - 000000c000]          BOOTMAP ==> [0000008000 - 000000c000]
    [    0.000000] found SMP MP-table at [c00fe710] fe710
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x0001f688
    [    0.000000]   HighMem  0x0001f688 -> 0x0001f688
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x00000002
    [    0.000000]     0: 0x00000006 -> 0x000000a0
    [    0.000000]     0: 0x00000100 -> 0x0001f688
    [    0.000000] On node 0 totalpages: 128548
    [    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001000
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3964 pages, LIFO batch:0
    [    0.000000]   Normal zone: 974 pages used for memmap
    [    0.000000]   Normal zone: 123578 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x07] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 8 CPUs, 7 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36024 r0 d21320 u524288
    [    0.000000] pcpu-alloc: s36024 r0 d21320 u524288 alloc=1*4194304
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127542
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=b466e4d8-e94c-4eb7-bd6a-6d8d0f955e59 ro quiet splash
    [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 2572960 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 490192k/514592k available (4673k kernel code, 23276k reserved, 2122k data, 656k init, 0k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xdfe88000 - 0xff7fe000   ( 505 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xdf688000   ( 502 MB)
    [    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
    [    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:2304 nr_irqs:472
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2792.975 MHz processor.
    [    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.95 BogoMIPS (lpj=11171900)
    [    0.004027] Security Framework initialized
    [    0.004049] AppArmor: AppArmor initialized
    [    0.004061] Mount-cache hash table entries: 512
    [    0.004223] Initializing cgroup subsys ns
    [    0.004229] Initializing cgroup subsys cpuacct
    [    0.004235] Initializing cgroup subsys memory
    [    0.004244] Initializing cgroup subsys devices
    [    0.004248] Initializing cgroup subsys freezer
    [    0.004251] Initializing cgroup subsys net_cls
    [    0.004281] CPU: Trace cache: 12K uops, L1 D cache: 16K
    [    0.004286] CPU: L2 cache: 1024K
    [    0.008007] CPU: Physical Processor ID: 0
    [    0.008010] CPU: Processor Core ID: 0
    [    0.008014] mce: CPU supports 4 MCE banks
    [    0.008028] CPU0: Thermal monitoring enabled (TM1)
    [    0.008034] using mwait in idle threads.
    [    0.008040] Performance Events: no PMU driver, software events only.
    [    0.008048] Checking 'hlt' instruction... OK.
    [    0.025071] SMP alternatives: switching to UP code
    [    0.038103] ACPI: Core revision 20090903
    [    0.085200] ftrace: converting mcount calls to 0f 1f 44 00 00
    [    0.085207] ftrace: allocating 21771 entries in 43 pages
    [    0.088068] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.088385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.131329] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
    [    0.132001] Brought up 1 CPUs
    [    0.132001] Total of 1 processors activated (5585.95 BogoMIPS).
    [    0.132001] CPU0 attaching NULL sched-domain.
    [    0.132001] devtmpfs: initialized
    [    0.132001] regulator: core version 0.5
    [    0.132001] Time: 21:54:39  Date: 08/02/10
    [    0.132001] NET: Registered protocol family 16
    [    0.132001] EISA bus registered
    [    0.132001] ACPI: bus type pci registered
    [    0.132001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [    0.132001] PCI: MCFG area at e0000000 reserved in E820
    [    0.132001] PCI: Using MMCONFIG for extended config space
    [    0.132001] PCI: Using configuration type 1 for base access
    [    0.132001] bio: create slab <bio-0> at 0
    [    0.132001] ACPI: EC: Look up EC in DSDT
    [    0.152209] ACPI: BIOS _OSI(Linux) query ignored
    [    0.163238] ACPI: Interpreter enabled
    [    0.163254] ACPI: (supports S0 S1 S3 S4 S5)
    [    0.163287] ACPI: Using IOAPIC for interrupt routing
    [    0.204923] ACPI: No dock devices found.
    [    0.208413] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.208517] pci 0000:00:02.0: reg 10 32bit mmio: [0xdff80000-0xdfffffff]
    [    0.208524] pci 0000:00:02.0: reg 14 io port: [0xecd8-0xecdf]
    [    0.208530] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xb0000000-0xbfffffff]
    [    0.208536] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdff40000-0xdff7ffff]
    [    0.208620] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdff3c000-0xdff3ffff]
    [    0.208668] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.208673] pci 0000:00:1b.0: PME# disabled
    [    0.208745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.208749] pci 0000:00:1c.0: PME# disabled
    [    0.208821] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.208826] pci 0000:00:1c.1: PME# disabled
    [    0.208881] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
    [    0.208936] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
    [    0.208992] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
    [    0.209046] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
    [    0.209106] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
    [    0.209161] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.209166] pci 0000:00:1d.7: PME# disabled
    [    0.209288] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    [    0.209293] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
    [    0.209298] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f
    [    0.209303] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 00e0-00ef
    [    0.209329] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
    [    0.209337] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
    [    0.209344] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
    [    0.209352] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
    [    0.209359] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
    [    0.209408] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
    [    0.209416] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
    [    0.209423] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
    [    0.209429] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
    [    0.209436] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf]
    [    0.209443] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdff3bc00-0xdff3bfff]
    [    0.209467] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.209471] pci 0000:00:1f.2: PME# disabled
    [    0.209521] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
    [    0.209594] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
    [    0.209645] pci 0000:00:1c.1: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
    [    0.209688] pci 0000:03:01.0: reg 10 32bit mmio: [0xdd000000-0xddffffff]
    [    0.209697] pci 0000:03:01.0: reg 14 32bit mmio pref: [0xc0000000-0xcfffffff]
    [    0.209705] pci 0000:03:01.0: reg 18 32bit mmio: [0xde000000-0xdeffffff]
    [    0.209727] pci 0000:03:01.0: reg 30 32bit mmio pref: [0xdfc00000-0xdfc1ffff]
    [    0.209785] pci 0000:03:02.0: reg 10 32bit mmio: [0xdfbf0000-0xdfbfffff]
    [    0.209794] pci 0000:03:02.0: reg 14 io port: [0xdcb8-0xdcbf]
    [    0.209840] pci 0000:03:02.0: PME# supported from D3hot D3cold
    [    0.209845] pci 0000:03:02.0: PME# disabled
    [    0.209891] pci 0000:03:08.0: reg 10 32bit mmio: [0xdfbef000-0xdfbeffff]
    [    0.209900] pci 0000:03:08.0: reg 14 io port: [0xdcc0-0xdcff]
    [    0.209946] pci 0000:03:08.0: supports D1 D2
    [    0.209948] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.209954] pci 0000:03:08.0: PME# disabled
    [    0.209993] pci 0000:00:1e.0: transparent bridge
    [    0.209998] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
    [    0.210003] pci 0000:00:1e.0: bridge 32bit mmio: [0xdd000000-0xdfcfffff]
    [    0.210010] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
    [    0.210028] pci_bus 0000:00: on NUMA node 0
    [    0.210034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.210369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    [    0.210694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
    [    0.210892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
    [    0.602421] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
    [    0.602770] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    [    0.603116] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15)
    [    0.603456] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
    [    0.603806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    [    0.604276] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
    [    0.604619] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    [    0.604966] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
    [    0.605158] vgaarb: device added: PCI:0000:03:01.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.605163] vgaarb: loaded
    [    0.605335] SCSI subsystem initialized
    [    0.605403] libata version 3.00 loaded.
    [    0.605500] usbcore: registered new interface driver usbfs
    [    0.605517] usbcore: registered new interface driver hub
    [    0.605552] usbcore: registered new device driver usb
    [    0.605736] ACPI: WMI: Mapper loaded
    [    0.605739] PCI: Using ACPI for IRQ routing
    [    0.605911] NetLabel: Initializing
    [    0.605914] NetLabel:  domain hash size = 128
    [    0.605916] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.605936] NetLabel:  unlabeled traffic allowed by default
    [    0.605984] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.605991] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.612015] Switching to clocksource tsc
    [    0.614370] AppArmor: AppArmor Filesystem Enabled
    [    0.614388] pnp: PnP ACPI init
    [    0.614405] ACPI: bus type pnp registered
    [    0.620225] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
    [    0.620230] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
    [    0.639385] pnp: PnP ACPI: found 8 devices
    [    0.639389] ACPI: ACPI bus type pnp unregistered
    [    0.639395] PnPBIOS: Disabled by ACPI PNP
    [    0.639410] system 00:01: ioport range 0xc00-0xc7f has been reserved
    [    0.639421] system 00:06: iomem range 0x0-0x9ffff could not be reserved
    [    0.639426] system 00:06: iomem range 0x100000-0xffffff could not be reserved
    [    0.639429] system 00:06: iomem range 0x1000000-0x1f688bff could not be reserved
    [    0.639433] system 00:06: iomem range 0xc0000-0xfffff could not be reserved
    [    0.639437] system 00:06: iomem range 0xfec00000-0xfecfffff could not be reserved
    [    0.639441] system 00:06: iomem range 0xfee00000-0xfeefffff has been reserved
    [    0.639444] system 00:06: iomem range 0xfed20000-0xfed9ffff has been reserved
    [    0.639448] system 00:06: iomem range 0xffb00000-0xffbfffff has been reserved
    [    0.639451] system 00:06: iomem range 0xffc00000-0xffffffff has been reserved
    [    0.639463] system 00:07: ioport range 0x100-0x1fe could not be reserved
    [    0.639467] system 00:07: ioport range 0x200-0x277 has been reserved
    [    0.639471] system 00:07: ioport range 0x280-0x2e7 has been reserved
    [    0.639474] system 00:07: ioport range 0x2e8-0x2ef has been reserved
    [    0.639478] system 00:07: ioport range 0x2f0-0x2f7 has been reserved
    [    0.639481] system 00:07: ioport range 0x2f8-0x2ff has been reserved
    [    0.639485] system 00:07: ioport range 0x300-0x377 could not be reserved
    [    0.639488] system 00:07: ioport range 0x380-0x3bb has been reserved
    [    0.639492] system 00:07: ioport range 0x3c0-0x3e7 could not be reserved
    [    0.639496] system 00:07: ioport range 0x3f6-0x3f7 could not be reserved
    [    0.639499] system 00:07: ioport range 0x400-0x4cf has been reserved
    [    0.639503] system 00:07: ioport range 0x4d2-0x57f has been reserved
    [    0.639506] system 00:07: ioport range 0x580-0x677 has been reserved
    [    0.639510] system 00:07: ioport range 0x680-0x777 has been reserved
    [    0.639513] system 00:07: ioport range 0x780-0x7bb has been reserved
    [    0.639517] system 00:07: ioport range 0x7c0-0x7ff has been reserved
    [    0.639521] system 00:07: ioport range 0x8e0-0x8ff has been reserved
    [    0.639524] system 00:07: ioport range 0x900-0x9fe has been reserved
    [    0.639528] system 00:07: ioport range 0xa00-0xafe has been reserved
    [    0.639531] system 00:07: ioport range 0xb00-0xbfe has been reserved
    [    0.639535] system 00:07: ioport range 0xc80-0xcaf has been reserved
    [    0.639538] system 00:07: ioport range 0xcb0-0xcbf has been reserved
    [    0.639542] system 00:07: ioport range 0xcc0-0xcf7 has been reserved
    [    0.639546] system 00:07: ioport range 0xd00-0xdfe has been reserved
    [    0.639549] system 00:07: ioport range 0xe00-0xefe has been reserved
    [    0.639553] system 00:07: ioport range 0xf00-0xffe has been reserved
    [    0.639557] system 00:07: ioport range 0x2000-0x20fe has been reserved
    [    0.639560] system 00:07: ioport range 0x2100-0x21fe has been reserved
    [    0.639564] system 00:07: ioport range 0x2200-0x22fe has been reserved
    [    0.639568] system 00:07: ioport range 0x2300-0x23fe has been reserved
    [    0.639571] system 00:07: ioport range 0x2400-0x24fe has been reserved
    [    0.639575] system 00:07: ioport range 0x2500-0x25fe has been reserved
    [    0.639579] system 00:07: ioport range 0x2600-0x26fe has been reserved
    [    0.639583] system 00:07: ioport range 0x2700-0x27fe has been reserved
    [    0.639586] system 00:07: ioport range 0x2800-0x28fe has been reserved
    [    0.639590] system 00:07: ioport range 0x2900-0x29fe has been reserved
    [    0.639594] system 00:07: ioport range 0x2a00-0x2afe has been reserved
    [    0.639597] system 00:07: ioport range 0x2b00-0x2bfe has been reserved
    [    0.639601] system 00:07: ioport range 0x2c00-0x2cfe has been reserved
    [    0.639605] system 00:07: ioport range 0x2d00-0x2dfe has been reserved
    [    0.639608] system 00:07: ioport range 0x2e00-0x2efe has been reserved
    [    0.639612] system 00:07: ioport range 0x2f00-0x2ffe has been reserved
    [    0.639616] system 00:07: ioport range 0x5000-0x50fe has been reserved
    [    0.639620] system 00:07: ioport range 0x5100-0x51fe has been reserved
    [    0.639623] system 00:07: ioport range 0x5200-0x52fe has been reserved
    [    0.639627] system 00:07: ioport range 0x5300-0x53fe has been reserved
    [    0.639631] system 00:07: ioport range 0x5400-0x54fe has been reserved
    [    0.639635] system 00:07: ioport range 0x5500-0x55fe has been reserved
    [    0.639639] system 00:07: ioport range 0x5600-0x56fe has been reserved
    [    0.639642] system 00:07: ioport range 0x5700-0x57fe has been reserved
    [    0.639646] system 00:07: ioport range 0x5800-0x58fe has been reserved
    [    0.639650] system 00:07: ioport range 0x5900-0x59fe has been reserved
    [    0.639654] system 00:07: ioport range 0x5a00-0x5afe has been reserved
    [    0.639657] system 00:07: ioport range 0x5b00-0x5bfe has been reserved
    [    0.639661] system 00:07: ioport range 0x5c00-0x5cfe has been reserved
    [    0.639665] system 00:07: ioport range 0x5d00-0x5dfe has been reserved
    [    0.639669] system 00:07: ioport range 0x5e00-0x5efe has been reserved
    [    0.639673] system 00:07: ioport range 0x5f00-0x5ffe has been reserved
    [    0.639677] system 00:07: ioport range 0x6000-0x60fe has been reserved
    [    0.639681] system 00:07: ioport range 0x6100-0x61fe has been reserved
    [    0.639684] system 00:07: ioport range 0x6200-0x62fe has been reserved
    [    0.639688] system 00:07: ioport range 0x6300-0x63fe has been reserved
    [    0.639692] system 00:07: ioport range 0x6400-0x64fe has been reserved
    [    0.639696] system 00:07: ioport range 0x6500-0x65fe has been reserved
    [    0.639700] system 00:07: ioport range 0x6600-0x66fe has been reserved
    [    0.639704] system 00:07: ioport range 0x6700-0x67fe has been reserved
    [    0.639708] system 00:07: ioport range 0x6800-0x68fe has been reserved
    [    0.639712] system 00:07: ioport range 0x6900-0x69fe has been reserved
    [    0.639716] system 00:07: ioport range 0x6a00-0x6afe has been reserved
    [    0.639723] system 00:07: ioport range 0x6b00-0x6bfe has been reserved
    [    0.639728] system 00:07: ioport range 0x6c00-0x6cfe has been reserved
    [    0.639732] system 00:07: ioport range 0x6d00-0x6dfe has been reserved
    [    0.639736] system 00:07: ioport range 0x6e00-0x6efe has been reserved
    [    0.639740] system 00:07: ioport range 0x6f00-0x6ffe has been reserved
    [    0.639743] system 00:07: ioport range 0xa000-0xa0fe has been reserved
    [    0.639752] system 00:07: ioport range 0xa100-0xa1fe has been reserved
    [    0.639757] system 00:07: ioport range 0xa200-0xa2fe has been reserved
    [    0.639761] system 00:07: ioport range 0xa300-0xa3fe has been reserved
    [    0.639765] system 00:07: ioport range 0xa400-0xa4fe has been reserved
    [    0.639768] system 00:07: ioport range 0xa500-0xa5fe has been reserved
    [    0.639772] system 00:07: ioport range 0xa600-0xa6fe has been reserved
    [    0.639776] system 00:07: ioport range 0xa700-0xa7fe has been reserved
    [    0.639780] system 00:07: ioport range 0xa800-0xa8fe has been reserved
    [    0.639785] system 00:07: ioport range 0xa900-0xa9fe has been reserved
    [    0.639789] system 00:07: ioport range 0xaa00-0xaafe has been reserved
    [    0.639793] system 00:07: ioport range 0xab00-0xabfe has been reserved
    [    0.639797] system 00:07: ioport range 0xac00-0xacfe has been reserved
    [    0.639801] system 00:07: ioport range 0xad00-0xadfe has been reserved
    [    0.639805] system 00:07: ioport range 0xae00-0xaefe has been reserved
    [    0.639809] system 00:07: ioport range 0xaf00-0xaffe has been reserved
    [    0.639814] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
    [    0.639817] system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
    [    0.674594] pci 0000:03:01.0: BAR 6: address space collision on of device [0xdfc00000-0xdfc1ffff]
    [    0.674629] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
    [    0.674634] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
    [    0.674640] pci 0000:00:1c.0:   MEM window: 0xdfe00000-0xdfefffff
    [    0.674645] pci 0000:00:1c.0:   PREFETCH window: 0x00000020000000-0x000000201fffff
    [    0.674653] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
    [    0.674655] pci 0000:00:1c.1:   IO window: disabled
    [    0.674661] pci 0000:00:1c.1:   MEM window: 0xdfd00000-0xdfdfffff
    [    0.674665] pci 0000:00:1c.1:   PREFETCH window: disabled
    [    0.674674] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
    [    0.674677] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
    [    0.674683] pci 0000:00:1e.0:   MEM window: 0xdd000000-0xdfcfffff
    [    0.674688] pci 0000:00:1e.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
    [    0.674705]   alloc irq_desc for 16 on node -1
    [    0.674708]   alloc kstat_irqs on node -1
    [    0.674715] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.674721] pci 0000:00:1c.0: setting latency timer to 64
    [    0.674730]   alloc irq_desc for 17 on node -1
    [    0.674732]   alloc kstat_irqs on node -1
    [    0.674738] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.674743] pci 0000:00:1c.1: setting latency timer to 64
    [    0.674750] pci 0000:00:1e.0: setting latency timer to 64
    [    0.674756] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.674761] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [    0.674765] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
    [    0.674768] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
    [    0.674771] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x201fffff]
    [    0.674774] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfdfffff]
    [    0.674778] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
    [    0.674781] pci_bus 0000:03: resource 1 mem: [0xdd000000-0xdfcfffff]
    [    0.674784] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xcfffffff]
    [    0.674787] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
    [    0.674790] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
    [    0.674838] NET: Registered protocol family 2
    [    0.674971] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.675314] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.675387] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.675455] TCP: Hash tables configured (established 16384 bind 16384)
    [    0.675458] TCP reno registered
    [    0.675563] NET: Registered protocol family 1
    [    0.675677] pci 0000:03:01.0: Boot video device
    [    0.675693] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
    [    0.675770] Simple Boot Flag at 0x7a set to 0x1
    [    0.675918] cpufreq-nforce2: No nForce2 chipset.
    [    0.675981] Scanning for low memory corruption every 60 seconds
    [    0.676117] audit: initializing netlink socket (disabled)
    [    0.676129] type=2000 audit(1280786079.675:1): initialized
    [    0.685571] Trying to unpack rootfs image as initramfs...
    [    0.696391] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.704278] VFS: Disk quotas dquot_6.5.2
    [    0.704362] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.705137] fuse init (API version 7.13)
    [    0.705256] msgmni has been set to 958
    [    0.705506] alg: No test for stdrng (krng)
    [    0.705584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.705589] io scheduler noop registered
    [    0.705591] io scheduler anticipatory registered
    [    0.705594] io scheduler deadline registered
    [    0.705647] io scheduler cfq registered (default)
    [    0.705808]   alloc irq_desc for 24 on node -1
    [    0.705812]   alloc kstat_irqs on node -1
    [    0.705825] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [    0.705836] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.705984]   alloc irq_desc for 25 on node -1
    [    0.705987]   alloc kstat_irqs on node -1
    [    0.705997] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [    0.706006] pcieport 0000:00:1c.1: setting latency timer to 64
    [    0.706109] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.706187] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.706298] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [    0.706309] ACPI: Power Button [VBTN]
    [    0.706379] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.706384] ACPI: Power Button [PWRF]
    [    0.706831] processor LNXCPU:00: registered as cooling_device0
    [    0.780186] isapnp: Scanning for PnP cards...
    [    0.787736] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.789423] brd: module loaded
    [    0.790058] loop: module loaded
    [    0.790172] input: Macintosh mouse button emulation as /devices/virtual/input/input2
    [    0.790295] ata_piix 0000:00:1f.1: version 2.13
    [    0.790312] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.790362] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    0.796082] scsi0 : ata_piix
    [    0.839681] scsi1 : ata_piix
    [    0.839732] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [    0.839737] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [    0.839785]   alloc irq_desc for 20 on node -1
    [    0.839788]   alloc kstat_irqs on node -1
    [    0.839797] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
    [    0.839818] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [    0.840046] ata2: port disabled. ignoring.
    [    1.011665] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    1.016737] ata1.00: ATAPI: PHILIPS DVD+/-RW DVD8801, 4D28, max UDMA/33
    [    1.016926] scsi2 : ata_piix
    [    1.017035] scsi3 : ata_piix
    [    1.017083] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
    [    1.017087] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
    [    1.017657] Fixed MDIO Bus: probed
    [    1.017705] PPP generic driver version 2.4.2
    [    1.017778] tun: Universal TUN/TAP device driver, 1.6
    [    1.017781] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    1.017903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.017929]   alloc irq_desc for 21 on node -1
    [    1.017932]   alloc kstat_irqs on node -1
    [    1.017941] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [    1.017961] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    1.017966] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    1.018010] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    1.018042] ehci_hcd 0000:00:1d.7: debug port 1
    [    1.021940] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
    [    1.024400] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
    [    1.032555] ata1.00: configured for UDMA/33
    [    1.044253] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    1.044404] usb usb1: configuration #1 chosen from 1 choice
    [    1.044445] hub 1-0:1.0: USB hub found
    [    1.044457] hub 1-0:1.0: 8 ports detected
    [    1.044538] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.044560] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.044610] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [    1.044624] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    1.044628] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    1.044681] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    1.044711] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
    [    1.044818] usb usb2: configuration #1 chosen from 1 choice
    [    1.044855] hub 2-0:1.0: USB hub found
    [    1.044864] hub 2-0:1.0: 2 ports detected
    [    1.044925]   alloc irq_desc for 22 on node -1
    [    1.044928]   alloc kstat_irqs on node -1
    [    1.044935] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    [    1.044943] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    1.044948] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    1.044991] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    1.045025] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
    [    1.045134] usb usb3: configuration #1 chosen from 1 choice
    [    1.045170] hub 3-0:1.0: USB hub found
    [    1.045179] hub 3-0:1.0: 2 ports detected
    [    1.045233]   alloc irq_desc for 18 on node -1
    [    1.045236]   alloc kstat_irqs on node -1
    [    1.045242] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    1.045249] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    1.045253] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    1.045299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    1.045332] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
    [    1.045438] usb usb4: configuration #1 chosen from 1 choice
    [    1.045474] hub 4-0:1.0: USB hub found
    [    1.045483] hub 4-0:1.0: 2 ports detected
    [    1.045538]   alloc irq_desc for 23 on node -1
    [    1.045542]   alloc kstat_irqs on node -1
    [    1.045547] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [    1.045555] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    1.045559] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    1.045601] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    1.045637] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
    [    1.045740] usb usb5: configuration #1 chosen from 1 choice
    [    1.045776] hub 5-0:1.0: USB hub found
    [    1.045785] hub 5-0:1.0: 2 ports detected
    [    1.045913] PNP: No PS/2 controller found. Probing ports directly.
    [    1.053178] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.053190] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    1.053390] mice: PS/2 mouse device common for all mice
    [    1.053558] rtc_cmos 00:05: RTC can wake from S4
    [    1.053614] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    1.053642] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
    [    1.053794] device-mapper: uevent: version 1.0.3
    [    1.053927] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    1.056137] device-mapper: multipath: version 1.1.0 loaded
    [    1.056142] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    1.056315] EISA: Probing bus 0 at eisa.0
    [    1.056321] EISA: Cannot allocate resource for mainboard
    [    1.056325] Cannot allocate resource for EISA slot 1
    [    1.056327] Cannot allocate resource for EISA slot 2
    [    1.056337] Cannot allocate resource for EISA slot 5
    [    1.056340] Cannot allocate resource for EISA slot 6
    [    1.056350] EISA: Detected 0 cards.
    [    1.060103] cpuidle: using governor ladder
    [    1.060107] cpuidle: using governor menu
    [    1.060710] TCP cubic registered
    [    1.060882] NET: Registered protocol family 10
    [    1.061469] lo: Disabled Privacy Extensions
    [    1.061870] NET: Registered protocol family 17
    [    1.061940] Using IPI No-Shortcut mode
    [    1.062061] PM: Resume from disk failed.
    [    1.062076] registered taskstats version 1
    [    1.062390]   Magic number: 6:281:954
    [    1.062470] rtc_cmos 00:05: setting system clock to 2010-08-02 21:54:40 UTC (1280786080)
    [    1.062474] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.062477] EDD information not available.
    [    1.219068] ata3.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
    [    1.219073] ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
    [    1.224446] ata3.00: configured for UDMA/133
    [    1.237977] Freeing initrd memory: 7772k freed
    [    1.372605] isapnp: No Plug & Play device found
    [    1.374926] scsi 0:0:0:0: CD-ROM            PHILIPS  DVD+-RW DVD8801  4D28 PQ: 0 ANSI: 5
    [    1.383507] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [    1.383512] Uniform CD-ROM driver Revision: 3.20
    [    1.383643] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.383728] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.383903] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ/ ZM10 PQ: 0 ANSI: 5
    [    1.384066] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [    1.384170] sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
    [    1.384241] sd 2:0:0:0: [sda] Write Protect is off
    [    1.384245] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.384282] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.384462]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    [    1.437975] sd 2:0:0:0: [sda] Attached SCSI disk
    [    1.437992] Freeing unused kernel memory: 656k freed
    [    1.438402] Write protecting the kernel text: 4676k
    [    1.438434] Write protecting the kernel read-only data: 1840k
    [    1.460456] udev: starting version 151
    [    1.652045] usb 1-5: new high speed USB device using ehci_hcd and address 5
    [    1.664088] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [    1.664093] e100: Copyright(c) 1999-2006 Intel Corporation
    [    1.664138] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    1.688616] e100 0000:03:08.0: PME# disabled
    [    1.700108] e100: eth0: e100_probe: addr 0xdfbef000, irq 20, MAC addr 00:16:76:43:d9:e7
    [    1.786242] usb 1-5: configuration #1 chosen from 1 choice
    [    1.796523] Initializing USB Mass Storage driver...
    [    1.796652] scsi4 : SCSI emulation for USB Mass Storage devices
    [    1.796838] usbcore: registered new interface driver usb-storage
    [    1.796843] USB Mass Storage support registered.
    [    1.797273] usb-storage: device found at 5
    [    1.797276] usb-storage: waiting for device to settle before scanning
    [    1.896018] usb 1-6: new high speed USB device using ehci_hcd and address 6
    [    2.044621] usb 1-6: configuration #1 chosen from 1 choice
    [    2.284018] usb 2-2: new low speed USB device using uhci_hcd and address 2
    [    2.351963] EXT4-fs (sda5): mounted filesystem with ordered data mode
    [    2.462884] usb 2-2: configuration #1 chosen from 1 choice
    [    2.704021] usb 3-1: new full speed USB device using uhci_hcd and address 2
    [    2.874206] usb 3-1: configuration #1 chosen from 1 choice
    [    2.882107] hub 3-1:1.0: USB hub found
    [    2.883085] hub 3-1:1.0: 3 ports detected
    [    3.128048] usb 3-2: new low speed USB device using uhci_hcd and address 3
    [    3.296213] usb 3-2: configuration #1 chosen from 1 choice
    [    3.373094] usb 3-1.1: new full speed USB device using uhci_hcd and address 4
    [    3.508208] usb 3-1.1: configuration #1 chosen from 1 choice
    [    6.796177] usb-storage: device scan complete
    [    6.796909] scsi 4:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
    [    6.797506] sd 4:0:0:0: Attached scsi generic sg2 type 0
    [    6.798888] sd 4:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
    [    6.799385] sd 4:0:0:0: [sdb] Write Protect is off
    [    6.799389] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
    [    6.799392] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [    6.802632] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [    6.802637]  sdb: sdb1
    [    6.804509] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [    6.804514] sd 4:0:0:0: [sdb] Attached SCSI removable disk
    [   11.594478] udev: starting version 151
    [   11.632426] Adding 248824k swap on /dev/sda6.  Priority:-1 extents:1 across:248824k 
    [   11.710857] lp: driver loaded but no devices found
    [   11.898246] intel_rng: Firmware space is locked read-only. If you can't or
    [   11.898249] intel_rng: don't want to disable this in firmware setup, and if
    [   11.898250] intel_rng: you are certain that your system has a functional
    [   11.898252] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [   11.898411] Linux agpgart interface v0.103
    [   12.180822] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [   12.181841] [drm] Initialized drm 1.1.0 20060810
    [   12.183624] agpgart-intel 0000:00:00.0: Intel 915G Chipset
    [   12.183906] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    [   12.255601] cfg80211: Calling CRDA to update world regulatory domain
    [   12.263192] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [   12.298193] usbcore: registered new interface driver hiddev
    [   12.305492] cfg80211: World regulatory domain updated:
    [   12.305497] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   12.305501] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.305505] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   12.305508] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   12.305512] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.305515] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.311464] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
    [   12.311617] generic-usb 0003:0461:4D15.0002: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
    [   12.314656] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input4
    [   12.314776] generic-usb 0003:413C:2010.0003: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.1/input0
    [   12.326687] dell-wmi: No known WMI GUID found
    [   12.327044] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input5
    [   12.327171] generic-usb 0003:413C:2010.0004: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.1/input1
    [   12.327208] usbcore: registered new interface driver usbhid
    [   12.327213] usbhid: v2.6:USB HID core driver
    [   12.369540] type=1505 audit(1280800491.805:2):  operation="profile_load" pid=511 name="/sbin/dhclient3"
    [   12.370277] type=1505 audit(1280800491.805:3):  operation="profile_load" pid=511 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   12.370671] type=1505 audit(1280800491.805:4):  operation="profile_load" pid=511 name="/usr/lib/connman/scripts/dhclient-script"
    [   12.532219] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    [   12.532394] logitech 0003:046D:C218.0001: input,hidraw3: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.0-2/input0
    [   12.532408] logitech 0003:046D:C218.0001: Force feedback for Logitech Rumblepad 2 by Anssi Hannula <anssi.hannula@gmail.com>
    [   12.630761] nouveau 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [   12.652277] [drm] nouveau 0000:03:01.0: Detected an NV40 generation card (0x04a100a1)
    [   12.652662] [drm] nouveau 0000:03:01.0: Attempting to load BIOS image from PROM
    [   13.243534] [drm] nouveau 0000:03:01.0: ... appears to be valid
    [   13.243539] [drm] nouveau 0000:03:01.0: BIT BIOS found
    [   13.243543] [drm] nouveau 0000:03:01.0: Bios version 05.44.a2.10
    [   13.243547] [drm] nouveau 0000:03:01.0: BIT table 'd' not found
    [   13.243551] [drm] nouveau 0000:03:01.0: Found Display Configuration Block version 3.0
    [   13.243555] [drm] nouveau 0000:03:01.0: DCB connector table: VHER 0x30 5 7 2
    [   13.243559] [drm] nouveau 0000:03:01.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
    [   13.243563] [drm] nouveau 0000:03:01.0:   1: 0x00002230: type 0x30 idx 2 tag 0x08
    [   13.243567] [drm] nouveau 0000:03:01.0:   2: 0x00000110: type 0x10 idx 1 tag 0xff
    [   13.243570] [drm] nouveau 0000:03:01.0:   3: 0x00000111: type 0x11 idx 1 tag 0xff
    [   13.243574] [drm] nouveau 0000:03:01.0:   4: 0x00000113: type 0x13 idx 1 tag 0xff
    [   13.243577] [drm] nouveau 0000:03:01.0: Raw DCB entry 0: 01000300 00000028
    [   13.243581] [drm] nouveau 0000:03:01.0: Raw DCB entry 1: 01000302 00000020
    [   13.243584] [drm] nouveau 0000:03:01.0: Raw DCB entry 2: 02011310 00000028
    [   13.243587] [drm] nouveau 0000:03:01.0: Raw DCB entry 3: 020223f1 00c0c030
    [   13.243597] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 0 at offset 0xDEB0
    [   13.358731] phy0: Selected rate control algorithm 'minstrel'
    [   13.359653] Registered led device: rt2800usb-phy0::radio
    [   13.359679] Registered led device: rt2800usb-phy0::assoc
    [   13.359704] Registered led device: rt2800usb-phy0::quality
    [   13.360269] usbcore: registered new interface driver rt2800usb
    [   13.361383] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
    [   13.378939] type=1505 audit(1280800492.813:5):  operation="profile_load" pid=660 name="/usr/share/gdm/guest-session/Xsession"
    [   13.385509] type=1505 audit(1280800492.821:6):  operation="profile_replace" pid=662 name="/sbin/dhclient3"
    [   13.386260] type=1505 audit(1280800492.821:7):  operation="profile_replace" pid=662 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   13.386662] type=1505 audit(1280800492.821:8):  operation="profile_replace" pid=662 name="/usr/lib/connman/scripts/dhclient-script"
    [   13.390748] rtusb init --->
    [   13.390860] usbcore: registered new interface driver rt2870
    [   13.422220] type=1505 audit(1280800492.857:9):  operation="profile_load" pid=663 name="/usr/bin/evince"
    [   13.497330] type=1505 audit(1280800492.933:10):  operation="profile_load" pid=663 name="/usr/bin/evince-previewer"
    [   13.528375] type=1505 audit(1280800492.965:11):  operation="profile_load" pid=663 name="/usr/bin/evince-thumbnailer"
    [   13.567189] rt2800usb 1-6:1.0: firmware: requesting rt2870.bin
    [   13.623632] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   13.623676] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   13.643868] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 1 at offset 0xE19E
    [   13.700285] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 2 at offset 0xE6D8
    [   13.700323] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 3 at offset 0xE835
    [   13.708209] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 4 at offset 0xE9BE
    [   13.739973] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [   13.740511] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   13.740831] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   13.741128] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [   13.809700] [TTM] Zone  kernel: Available graphics memory: 249672 kiB.
    [   13.809716] [drm] nouveau 0000:03:01.0: 256 MiB VRAM
    [   13.813840] [drm] nouveau 0000:03:01.0: 64 MiB GART (aperture)
    [   13.816465] [drm] nouveau 0000:03:01.0: Allocating FIFO number 0
    [   13.819212] [drm] nouveau 0000:03:01.0: nouveau_channel_alloc: initialised FIFO 0
    [   13.819227] [drm] nouveau 0000:03:01.0: Initial CRTC_OWNER is 0
    [   13.819240] [drm] nouveau 0000:03:01.0: Saving VGA fonts
    [   13.988344] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   14.029923] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.085525] [drm] nouveau 0000:03:01.0: Detected a DVI-I connector
    [   14.085830] [drm] nouveau 0000:03:01.0: Detected a VGA connector
    [   14.086033] [drm] nouveau 0000:03:01.0: Detected a TV connector
    [   14.090145] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on vga encoder (output 0)
    [   14.090151] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on tmds encoder (output 1)
    [   14.090155] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on vga encoder (output 2)
    [   14.090160] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on TV encoder (output 3)
    [   14.145054] ppdev: user-space parallel port driver
    [   14.292242] [drm] nouveau 0000:03:01.0: allocated 1280x1024 fb: 0x49000, bo d5695600
    [   14.292368] fb0: nouveaufb frame buffer device
    [   14.292371] registered panic notifier
    [   14.292378] [drm] Initialized nouveau 0.0.15 20090420 for 0000:03:01.0 on minor 0
    [   14.294837] vga16fb: initializing
    [   14.294842] vga16fb: mapped to 0xc00a0000
    [   14.294847] vga16fb: not registering due to another framebuffer present
    [   14.353835] [drm] nouveau 0000:03:01.0: Setting dpms mode 0 on vga encoder (output 2)
    [   14.353843] [drm] nouveau 0000:03:01.0: Output VGA-1 is running on CRTC 0 using output B
    [   14.385024] Console: switching to colour frame buffer device 160x64
    [   14.922185] CPU0 attaching NULL sched-domain.
    [   14.922271] CPU0 attaching NULL sched-domain.
    [   15.590968] [drm] nouveau 0000:03:01.0: Allocating FIFO number 1
    [   15.593321] [drm] nouveau 0000:03:01.0: nouveau_channel_alloc: initialised FIFO 1
    [   18.105042] CPU0 attaching NULL sched-domain.
    [   18.105128] CPU0 attaching NULL sched-domain.
    [   26.936840] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [   26.939367] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [   26.941778] wlan0: direct probe responded
    [   26.941784] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [   26.943181] wlan0: authenticated
    [   26.943208] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [   26.945204] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [   26.945209] wlan0: associated
    [   26.975738] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   26.975808] cfg80211: Calling CRDA for country: US
    [   26.990507] cfg80211: Received country IE:
    [   26.990512] cfg80211: Regulatory domain: US
    [   26.990515] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   26.990519] 	(2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
    [   26.990521] cfg80211: CRDA thinks this should applied:
    [   26.990524] cfg80211: Regulatory domain: US
    [   26.990526] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   26.990529] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   26.990532] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
    [   26.990536] 	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   26.990539] 	(5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   26.990542] 	(5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   26.990545] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
    [   26.990548] cfg80211: We intersect both of these and get:
    [   26.990550] cfg80211: Regulatory domain: 98
    [   26.990552] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   26.990555] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   26.990561] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE
    [   26.990564] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE
    [   26.990567] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE
    [   26.990572] cfg80211: Current regulatory domain updated by AP to: US
    [   26.990575] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   26.990578] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   28.129209] padlock: VIA PadLock not detected.
    [   37.488009] wlan0: no IPv6 routers present
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000001f688c00 (usable)
    [    0.000000]  BIOS-e820: 000000001f688c00 - 000000001f68ac00 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000001f68ac00 - 000000001f68cc00 (ACPI data)
    [    0.000000]  BIOS-e820: 000000001f68cc00 - 0000000020000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000] DMI 2.3 present.
    [    0.000000] last_pfn = 0x1f688 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FE0000000 write-back
    [    0.000000]   1 base 01F800000 mask FFF800000 uncachable
    [    0.000000]   2 base 01F700000 mask FFFF00000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] modified physical RAM map:
    [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
    [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
    [    0.000000]  modified: 0000000000006000 - 00000000000a0000 (usable)
    [    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
    [    0.000000]  modified: 0000000000100000 - 000000001f688c00 (usable)
    [    0.000000]  modified: 000000001f688c00 - 000000001f68ac00 (ACPI NVS)
    [    0.000000]  modified: 000000001f68ac00 - 000000001f68cc00 (ACPI data)
    [    0.000000]  modified: 000000001f68cc00 - 0000000020000000 (reserved)
    [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  modified: 00000000fec00000 - 00000000fed00400 (reserved)
    [    0.000000]  modified: 00000000fed20000 - 00000000feda0000 (reserved)
    [    0.000000]  modified: 00000000fee00000 - 00000000fef00000 (reserved)
    [    0.000000]  modified: 00000000ffb00000 - 0000000100000000 (reserved)
    [    0.000000] initial memory mapped : 0 - 00c00000
    [    0.000000] init_memory_mapping: 0000000000000000-000000001f688000
    [    0.000000] Using x86 segment limits to approximate NX protection
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 001f400000 page 2M
    [    0.000000]  001f400000 - 001f688000 page 4k
    [    0.000000] kernel direct mapping tables up to 1f688000 @ 7000-c000
    [    0.000000] RAMDISK: 1718f000 - 17926306
    [    0.000000] ACPI: RSDP 000fec00 00014 (v00 DELL  )
    [    0.000000] ACPI: RSDT 000fcc50 0003C (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: FACP 000fcc8c 00074 (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: DSDT fffc56f3 02D5F (v01   DELL    dt_ex 00001000 MSFT 0100000D)
    [    0.000000] ACPI: FACS 1f688c00 00040
    [    0.000000] ACPI: SSDT fffc858f 000BA (v01   DELL    st_ex 00001000 MSFT 0100000D)
    [    0.000000] ACPI: APIC 000fcd00 00092 (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: BOOT 000fcd92 00028 (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: MCFG 000fcdba 0003E (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: HPET 000fcdf8 00038 (v01 DELL    DV051   00000007 ASL  00000061)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 502MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 1f688000
    [    0.000000]   low ram: 0 - 1f688000
    [    0.000000]   node 0 low ram: 00000000 - 1f688000
    [    0.000000]   node 0 bootmap 00008000 - 0000bed4
    [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001f688000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    [    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
    [    0.000000]   #4 [001718f000 - 0017926306]          RAMDISK ==> [001718f000 - 0017926306]
    [    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
    [    0.000000]   #6 [00008da000 - 00008dd198]              BRK ==> [00008da000 - 00008dd198]
    [    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
    [    0.000000]   #8 [0000008000 - 000000c000]          BOOTMAP ==> [0000008000 - 000000c000]
    [    0.000000] found SMP MP-table at [c00fe710] fe710
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x0001f688
    [    0.000000]   HighMem  0x0001f688 -> 0x0001f688
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x00000002
    [    0.000000]     0: 0x00000006 -> 0x000000a0
    [    0.000000]     0: 0x00000100 -> 0x0001f688
    [    0.000000] On node 0 totalpages: 128548
    [    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001000
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3964 pages, LIFO batch:0
    [    0.000000]   Normal zone: 974 pages used for memmap
    [    0.000000]   Normal zone: 123578 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x07] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 8 CPUs, 7 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36024 r0 d21320 u524288
    [    0.000000] pcpu-alloc: s36024 r0 d21320 u524288 alloc=1*4194304
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127542
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=b466e4d8-e94c-4eb7-bd6a-6d8d0f955e59 ro quiet splash
    [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 2572960 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 490192k/514592k available (4673k kernel code, 23276k reserved, 2122k data, 656k init, 0k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xdfe88000 - 0xff7fe000   ( 505 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xdf688000   ( 502 MB)
    [    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
    [    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
    [    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:2304 nr_irqs:472
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2792.975 MHz processor.
    [    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.95 BogoMIPS (lpj=11171900)
    [    0.004027] Security Framework initialized
    [    0.004049] AppArmor: AppArmor initialized
    [    0.004061] Mount-cache hash table entries: 512
    [    0.004223] Initializing cgroup subsys ns
    [    0.004229] Initializing cgroup subsys cpuacct
    [    0.004235] Initializing cgroup subsys memory
    [    0.004244] Initializing cgroup subsys devices
    [    0.004248] Initializing cgroup subsys freezer
    [    0.004251] Initializing cgroup subsys net_cls
    [    0.004281] CPU: Trace cache: 12K uops, L1 D cache: 16K
    [    0.004286] CPU: L2 cache: 1024K
    [    0.008007] CPU: Physical Processor ID: 0
    [    0.008010] CPU: Processor Core ID: 0
    [    0.008014] mce: CPU supports 4 MCE banks
    [    0.008028] CPU0: Thermal monitoring enabled (TM1)
    [    0.008034] using mwait in idle threads.
    [    0.008040] Performance Events: no PMU driver, software events only.
    [    0.008048] Checking 'hlt' instruction... OK.
    [    0.025071] SMP alternatives: switching to UP code
    [    0.038103] ACPI: Core revision 20090903
    [    0.085200] ftrace: converting mcount calls to 0f 1f 44 00 00
    [    0.085207] ftrace: allocating 21771 entries in 43 pages
    [    0.088068] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.088385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.131329] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
    [    0.132001] Brought up 1 CPUs
    [    0.132001] Total of 1 processors activated (5585.95 BogoMIPS).
    [    0.132001] CPU0 attaching NULL sched-domain.
    [    0.132001] devtmpfs: initialized
    [    0.132001] regulator: core version 0.5
    [    0.132001] Time: 21:54:39  Date: 08/02/10
    [    0.132001] NET: Registered protocol family 16
    [    0.132001] EISA bus registered
    [    0.132001] ACPI: bus type pci registered
    [    0.132001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    [    0.132001] PCI: MCFG area at e0000000 reserved in E820
    [    0.132001] PCI: Using MMCONFIG for extended config space
    [    0.132001] PCI: Using configuration type 1 for base access
    [    0.132001] bio: create slab <bio-0> at 0
    [    0.132001] ACPI: EC: Look up EC in DSDT
    [    0.152209] ACPI: BIOS _OSI(Linux) query ignored
    [    0.163238] ACPI: Interpreter enabled
    [    0.163254] ACPI: (supports S0 S1 S3 S4 S5)
    [    0.163287] ACPI: Using IOAPIC for interrupt routing
    [    0.204923] ACPI: No dock devices found.
    [    0.208413] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.208517] pci 0000:00:02.0: reg 10 32bit mmio: [0xdff80000-0xdfffffff]
    [    0.208524] pci 0000:00:02.0: reg 14 io port: [0xecd8-0xecdf]
    [    0.208530] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xb0000000-0xbfffffff]
    [    0.208536] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdff40000-0xdff7ffff]
    [    0.208620] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdff3c000-0xdff3ffff]
    [    0.208668] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.208673] pci 0000:00:1b.0: PME# disabled
    [    0.208745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.208749] pci 0000:00:1c.0: PME# disabled
    [    0.208821] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.208826] pci 0000:00:1c.1: PME# disabled
    [    0.208881] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
    [    0.208936] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
    [    0.208992] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
    [    0.209046] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
    [    0.209106] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
    [    0.209161] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.209166] pci 0000:00:1d.7: PME# disabled
    [    0.209288] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    [    0.209293] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
    [    0.209298] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f
    [    0.209303] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 00e0-00ef
    [    0.209329] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
    [    0.209337] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
    [    0.209344] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
    [    0.209352] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
    [    0.209359] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
    [    0.209408] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
    [    0.209416] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
    [    0.209423] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
    [    0.209429] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
    [    0.209436] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf]
    [    0.209443] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdff3bc00-0xdff3bfff]
    [    0.209467] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.209471] pci 0000:00:1f.2: PME# disabled
    [    0.209521] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
    [    0.209594] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
    [    0.209645] pci 0000:00:1c.1: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
    [    0.209688] pci 0000:03:01.0: reg 10 32bit mmio: [0xdd000000-0xddffffff]
    [    0.209697] pci 0000:03:01.0: reg 14 32bit mmio pref: [0xc0000000-0xcfffffff]
    [    0.209705] pci 0000:03:01.0: reg 18 32bit mmio: [0xde000000-0xdeffffff]
    [    0.209727] pci 0000:03:01.0: reg 30 32bit mmio pref: [0xdfc00000-0xdfc1ffff]
    [    0.209785] pci 0000:03:02.0: reg 10 32bit mmio: [0xdfbf0000-0xdfbfffff]
    [    0.209794] pci 0000:03:02.0: reg 14 io port: [0xdcb8-0xdcbf]
    [    0.209840] pci 0000:03:02.0: PME# supported from D3hot D3cold
    [    0.209845] pci 0000:03:02.0: PME# disabled
    [    0.209891] pci 0000:03:08.0: reg 10 32bit mmio: [0xdfbef000-0xdfbeffff]
    [    0.209900] pci 0000:03:08.0: reg 14 io port: [0xdcc0-0xdcff]
    [    0.209946] pci 0000:03:08.0: supports D1 D2
    [    0.209948] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.209954] pci 0000:03:08.0: PME# disabled
    [    0.209993] pci 0000:00:1e.0: transparent bridge
    [    0.209998] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
    [    0.210003] pci 0000:00:1e.0: bridge 32bit mmio: [0xdd000000-0xdfcfffff]
    [    0.210010] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
    [    0.210028] pci_bus 0000:00: on NUMA node 0
    [    0.210034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.210369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    [    0.210694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
    [    0.210892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
    [    0.602421] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
    [    0.602770] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    [    0.603116] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15)
    [    0.603456] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
    [    0.603806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    [    0.604276] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
    [    0.604619] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    [    0.604966] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
    [    0.605158] vgaarb: device added: PCI:0000:03:01.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.605163] vgaarb: loaded
    [    0.605335] SCSI subsystem initialized
    [    0.605403] libata version 3.00 loaded.
    [    0.605500] usbcore: registered new interface driver usbfs
    [    0.605517] usbcore: registered new interface driver hub
    [    0.605552] usbcore: registered new device driver usb
    [    0.605736] ACPI: WMI: Mapper loaded
    [    0.605739] PCI: Using ACPI for IRQ routing
    [    0.605911] NetLabel: Initializing
    [    0.605914] NetLabel:  domain hash size = 128
    [    0.605916] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.605936] NetLabel:  unlabeled traffic allowed by default
    [    0.605984] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.605991] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.612015] Switching to clocksource tsc
    [    0.614370] AppArmor: AppArmor Filesystem Enabled
    [    0.614388] pnp: PnP ACPI init
    [    0.614405] ACPI: bus type pnp registered
    [    0.620225] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
    [    0.620230] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
    [    0.639385] pnp: PnP ACPI: found 8 devices
    [    0.639389] ACPI: ACPI bus type pnp unregistered
    [    0.639395] PnPBIOS: Disabled by ACPI PNP
    [    0.639410] system 00:01: ioport range 0xc00-0xc7f has been reserved
    [    0.639421] system 00:06: iomem range 0x0-0x9ffff could not be reserved
    [    0.639426] system 00:06: iomem range 0x100000-0xffffff could not be reserved
    [    0.639429] system 00:06: iomem range 0x1000000-0x1f688bff could not be reserved
    [    0.639433] system 00:06: iomem range 0xc0000-0xfffff could not be reserved
    [    0.639437] system 00:06: iomem range 0xfec00000-0xfecfffff could not be reserved
    [    0.639441] system 00:06: iomem range 0xfee00000-0xfeefffff has been reserved
    [    0.639444] system 00:06: iomem range 0xfed20000-0xfed9ffff has been reserved
    [    0.639448] system 00:06: iomem range 0xffb00000-0xffbfffff has been reserved
    [    0.639451] system 00:06: iomem range 0xffc00000-0xffffffff has been reserved
    [    0.639463] system 00:07: ioport range 0x100-0x1fe could not be reserved
    [    0.639467] system 00:07: ioport range 0x200-0x277 has been reserved
    [    0.639471] system 00:07: ioport range 0x280-0x2e7 has been reserved
    [    0.639474] system 00:07: ioport range 0x2e8-0x2ef has been reserved
    [    0.639478] system 00:07: ioport range 0x2f0-0x2f7 has been reserved
    [    0.639481] system 00:07: ioport range 0x2f8-0x2ff has been reserved
    [    0.639485] system 00:07: ioport range 0x300-0x377 could not be reserved
    [    0.639488] system 00:07: ioport range 0x380-0x3bb has been reserved
    [    0.639492] system 00:07: ioport range 0x3c0-0x3e7 could not be reserved
    [    0.639496] system 00:07: ioport range 0x3f6-0x3f7 could not be reserved
    [    0.639499] system 00:07: ioport range 0x400-0x4cf has been reserved
    [    0.639503] system 00:07: ioport range 0x4d2-0x57f has been reserved
    [    0.639506] system 00:07: ioport range 0x580-0x677 has been reserved
    [    0.639510] system 00:07: ioport range 0x680-0x777 has been reserved
    [    0.639513] system 00:07: ioport range 0x780-0x7bb has been reserved
    [    0.639517] system 00:07: ioport range 0x7c0-0x7ff has been reserved
    [    0.639521] system 00:07: ioport range 0x8e0-0x8ff has been reserved
    [    0.639524] system 00:07: ioport range 0x900-0x9fe has been reserved
    [    0.639528] system 00:07: ioport range 0xa00-0xafe has been reserved
    [    0.639531] system 00:07: ioport range 0xb00-0xbfe has been reserved
    [    0.639535] system 00:07: ioport range 0xc80-0xcaf has been reserved
    [    0.639538] system 00:07: ioport range 0xcb0-0xcbf has been reserved
    [    0.639542] system 00:07: ioport range 0xcc0-0xcf7 has been reserved
    [    0.639546] system 00:07: ioport range 0xd00-0xdfe has been reserved
    [    0.639549] system 00:07: ioport range 0xe00-0xefe has been reserved
    [    0.639553] system 00:07: ioport range 0xf00-0xffe has been reserved
    [    0.639557] system 00:07: ioport range 0x2000-0x20fe has been reserved
    [    0.639560] system 00:07: ioport range 0x2100-0x21fe has been reserved
    [    0.639564] system 00:07: ioport range 0x2200-0x22fe has been reserved
    [    0.639568] system 00:07: ioport range 0x2300-0x23fe has been reserved
    [    0.639571] system 00:07: ioport range 0x2400-0x24fe has been reserved
    [    0.639575] system 00:07: ioport range 0x2500-0x25fe has been reserved
    [    0.639579] system 00:07: ioport range 0x2600-0x26fe has been reserved
    [    0.639583] system 00:07: ioport range 0x2700-0x27fe has been reserved
    [    0.639586] system 00:07: ioport range 0x2800-0x28fe has been reserved
    [    0.639590] system 00:07: ioport range 0x2900-0x29fe has been reserved
    [    0.639594] system 00:07: ioport range 0x2a00-0x2afe has been reserved
    [    0.639597] system 00:07: ioport range 0x2b00-0x2bfe has been reserved
    [    0.639601] system 00:07: ioport range 0x2c00-0x2cfe has been reserved
    [    0.639605] system 00:07: ioport range 0x2d00-0x2dfe has been reserved
    [    0.639608] system 00:07: ioport range 0x2e00-0x2efe has been reserved
    [    0.639612] system 00:07: ioport range 0x2f00-0x2ffe has been reserved
    [    0.639616] system 00:07: ioport range 0x5000-0x50fe has been reserved
    [    0.639620] system 00:07: ioport range 0x5100-0x51fe has been reserved
    [    0.639623] system 00:07: ioport range 0x5200-0x52fe has been reserved
    [    0.639627] system 00:07: ioport range 0x5300-0x53fe has been reserved
    [    0.639631] system 00:07: ioport range 0x5400-0x54fe has been reserved
    [    0.639635] system 00:07: ioport range 0x5500-0x55fe has been reserved
    [    0.639639] system 00:07: ioport range 0x5600-0x56fe has been reserved
    [    0.639642] system 00:07: ioport range 0x5700-0x57fe has been reserved
    [    0.639646] system 00:07: ioport range 0x5800-0x58fe has been reserved
    [    0.639650] system 00:07: ioport range 0x5900-0x59fe has been reserved
    [    0.639654] system 00:07: ioport range 0x5a00-0x5afe has been reserved
    [    0.639657] system 00:07: ioport range 0x5b00-0x5bfe has been reserved
    [    0.639661] system 00:07: ioport range 0x5c00-0x5cfe has been reserved
    [    0.639665] system 00:07: ioport range 0x5d00-0x5dfe has been reserved
    [    0.639669] system 00:07: ioport range 0x5e00-0x5efe has been reserved
    [    0.639673] system 00:07: ioport range 0x5f00-0x5ffe has been reserved
    [    0.639677] system 00:07: ioport range 0x6000-0x60fe has been reserved
    [    0.639681] system 00:07: ioport range 0x6100-0x61fe has been reserved
    [    0.639684] system 00:07: ioport range 0x6200-0x62fe has been reserved
    [    0.639688] system 00:07: ioport range 0x6300-0x63fe has been reserved
    [    0.639692] system 00:07: ioport range 0x6400-0x64fe has been reserved
    [    0.639696] system 00:07: ioport range 0x6500-0x65fe has been reserved
    [    0.639700] system 00:07: ioport range 0x6600-0x66fe has been reserved
    [    0.639704] system 00:07: ioport range 0x6700-0x67fe has been reserved
    [    0.639708] system 00:07: ioport range 0x6800-0x68fe has been reserved
    [    0.639712] system 00:07: ioport range 0x6900-0x69fe has been reserved
    [    0.639716] system 00:07: ioport range 0x6a00-0x6afe has been reserved
    [    0.639723] system 00:07: ioport range 0x6b00-0x6bfe has been reserved
    [    0.639728] system 00:07: ioport range 0x6c00-0x6cfe has been reserved
    [    0.639732] system 00:07: ioport range 0x6d00-0x6dfe has been reserved
    [    0.639736] system 00:07: ioport range 0x6e00-0x6efe has been reserved
    [    0.639740] system 00:07: ioport range 0x6f00-0x6ffe has been reserved
    [    0.639743] system 00:07: ioport range 0xa000-0xa0fe has been reserved
    [    0.639752] system 00:07: ioport range 0xa100-0xa1fe has been reserved
    [    0.639757] system 00:07: ioport range 0xa200-0xa2fe has been reserved
    [    0.639761] system 00:07: ioport range 0xa300-0xa3fe has been reserved
    [    0.639765] system 00:07: ioport range 0xa400-0xa4fe has been reserved
    [    0.639768] system 00:07: ioport range 0xa500-0xa5fe has been reserved
    [    0.639772] system 00:07: ioport range 0xa600-0xa6fe has been reserved
    [    0.639776] system 00:07: ioport range 0xa700-0xa7fe has been reserved
    [    0.639780] system 00:07: ioport range 0xa800-0xa8fe has been reserved
    [    0.639785] system 00:07: ioport range 0xa900-0xa9fe has been reserved
    [    0.639789] system 00:07: ioport range 0xaa00-0xaafe has been reserved
    [    0.639793] system 00:07: ioport range 0xab00-0xabfe has been reserved
    [    0.639797] system 00:07: ioport range 0xac00-0xacfe has been reserved
    [    0.639801] system 00:07: ioport range 0xad00-0xadfe has been reserved
    [    0.639805] system 00:07: ioport range 0xae00-0xaefe has been reserved
    [    0.639809] system 00:07: ioport range 0xaf00-0xaffe has been reserved
    [    0.639814] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
    [    0.639817] system 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
    [    0.674594] pci 0000:03:01.0: BAR 6: address space collision on of device [0xdfc00000-0xdfc1ffff]
    [    0.674629] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
    [    0.674634] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
    [    0.674640] pci 0000:00:1c.0:   MEM window: 0xdfe00000-0xdfefffff
    [    0.674645] pci 0000:00:1c.0:   PREFETCH window: 0x00000020000000-0x000000201fffff
    [    0.674653] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
    [    0.674655] pci 0000:00:1c.1:   IO window: disabled
    [    0.674661] pci 0000:00:1c.1:   MEM window: 0xdfd00000-0xdfdfffff
    [    0.674665] pci 0000:00:1c.1:   PREFETCH window: disabled
    [    0.674674] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
    [    0.674677] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
    [    0.674683] pci 0000:00:1e.0:   MEM window: 0xdd000000-0xdfcfffff
    [    0.674688] pci 0000:00:1e.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
    [    0.674705]   alloc irq_desc for 16 on node -1
    [    0.674708]   alloc kstat_irqs on node -1
    [    0.674715] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.674721] pci 0000:00:1c.0: setting latency timer to 64
    [    0.674730]   alloc irq_desc for 17 on node -1
    [    0.674732]   alloc kstat_irqs on node -1
    [    0.674738] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.674743] pci 0000:00:1c.1: setting latency timer to 64
    [    0.674750] pci 0000:00:1e.0: setting latency timer to 64
    [    0.674756] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.674761] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    [    0.674765] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
    [    0.674768] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
    [    0.674771] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x201fffff]
    [    0.674774] pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfdfffff]
    [    0.674778] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
    [    0.674781] pci_bus 0000:03: resource 1 mem: [0xdd000000-0xdfcfffff]
    [    0.674784] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xcfffffff]
    [    0.674787] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
    [    0.674790] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
    [    0.674838] NET: Registered protocol family 2
    [    0.674971] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.675314] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.675387] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.675455] TCP: Hash tables configured (established 16384 bind 16384)
    [    0.675458] TCP reno registered
    [    0.675563] NET: Registered protocol family 1
    [    0.675677] pci 0000:03:01.0: Boot video device
    [    0.675693] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
    [    0.675770] Simple Boot Flag at 0x7a set to 0x1
    [    0.675918] cpufreq-nforce2: No nForce2 chipset.
    [    0.675981] Scanning for low memory corruption every 60 seconds
    [    0.676117] audit: initializing netlink socket (disabled)
    [    0.676129] type=2000 audit(1280786079.675:1): initialized
    [    0.685571] Trying to unpack rootfs image as initramfs...
    [    0.696391] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.704278] VFS: Disk quotas dquot_6.5.2
    [    0.704362] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.705137] fuse init (API version 7.13)
    [    0.705256] msgmni has been set to 958
    [    0.705506] alg: No test for stdrng (krng)
    [    0.705584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.705589] io scheduler noop registered
    [    0.705591] io scheduler anticipatory registered
    [    0.705594] io scheduler deadline registered
    [    0.705647] io scheduler cfq registered (default)
    [    0.705808]   alloc irq_desc for 24 on node -1
    [    0.705812]   alloc kstat_irqs on node -1
    [    0.705825] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [    0.705836] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.705984]   alloc irq_desc for 25 on node -1
    [    0.705987]   alloc kstat_irqs on node -1
    [    0.705997] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [    0.706006] pcieport 0000:00:1c.1: setting latency timer to 64
    [    0.706109] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.706187] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.706298] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [    0.706309] ACPI: Power Button [VBTN]
    [    0.706379] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.706384] ACPI: Power Button [PWRF]
    [    0.706831] processor LNXCPU:00: registered as cooling_device0
    [    0.780186] isapnp: Scanning for PnP cards...
    [    0.787736] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.789423] brd: module loaded
    [    0.790058] loop: module loaded
    [    0.790172] input: Macintosh mouse button emulation as /devices/virtual/input/input2
    [    0.790295] ata_piix 0000:00:1f.1: version 2.13
    [    0.790312] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.790362] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    0.796082] scsi0 : ata_piix
    [    0.839681] scsi1 : ata_piix
    [    0.839732] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [    0.839737] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [    0.839785]   alloc irq_desc for 20 on node -1
    [    0.839788]   alloc kstat_irqs on node -1
    [    0.839797] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
    [    0.839818] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [    0.840046] ata2: port disabled. ignoring.
    [    1.011665] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    1.016737] ata1.00: ATAPI: PHILIPS DVD+/-RW DVD8801, 4D28, max UDMA/33
    [    1.016926] scsi2 : ata_piix
    [    1.017035] scsi3 : ata_piix
    [    1.017083] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
    [    1.017087] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
    [    1.017657] Fixed MDIO Bus: probed
    [    1.017705] PPP generic driver version 2.4.2
    [    1.017778] tun: Universal TUN/TAP device driver, 1.6
    [    1.017781] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    1.017903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.017929]   alloc irq_desc for 21 on node -1
    [    1.017932]   alloc kstat_irqs on node -1
    [    1.017941] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [    1.017961] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    1.017966] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    1.018010] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    1.018042] ehci_hcd 0000:00:1d.7: debug port 1
    [    1.021940] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
    [    1.024400] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
    [    1.032555] ata1.00: configured for UDMA/33
    [    1.044253] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    1.044404] usb usb1: configuration #1 chosen from 1 choice
    [    1.044445] hub 1-0:1.0: USB hub found
    [    1.044457] hub 1-0:1.0: 8 ports detected
    [    1.044538] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.044560] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.044610] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [    1.044624] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    1.044628] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    1.044681] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    1.044711] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
    [    1.044818] usb usb2: configuration #1 chosen from 1 choice
    [    1.044855] hub 2-0:1.0: USB hub found
    [    1.044864] hub 2-0:1.0: 2 ports detected
    [    1.044925]   alloc irq_desc for 22 on node -1
    [    1.044928]   alloc kstat_irqs on node -1
    [    1.044935] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    [    1.044943] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    1.044948] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    1.044991] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    1.045025] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
    [    1.045134] usb usb3: configuration #1 chosen from 1 choice
    [    1.045170] hub 3-0:1.0: USB hub found
    [    1.045179] hub 3-0:1.0: 2 ports detected
    [    1.045233]   alloc irq_desc for 18 on node -1
    [    1.045236]   alloc kstat_irqs on node -1
    [    1.045242] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    1.045249] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    1.045253] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    1.045299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    1.045332] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
    [    1.045438] usb usb4: configuration #1 chosen from 1 choice
    [    1.045474] hub 4-0:1.0: USB hub found
    [    1.045483] hub 4-0:1.0: 2 ports detected
    [    1.045538]   alloc irq_desc for 23 on node -1
    [    1.045542]   alloc kstat_irqs on node -1
    [    1.045547] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    [    1.045555] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    1.045559] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    1.045601] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    1.045637] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
    [    1.045740] usb usb5: configuration #1 chosen from 1 choice
    [    1.045776] hub 5-0:1.0: USB hub found
    [    1.045785] hub 5-0:1.0: 2 ports detected
    [    1.045913] PNP: No PS/2 controller found. Probing ports directly.
    [    1.053178] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.053190] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    1.053390] mice: PS/2 mouse device common for all mice
    [    1.053558] rtc_cmos 00:05: RTC can wake from S4
    [    1.053614] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    1.053642] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
    [    1.053794] device-mapper: uevent: version 1.0.3
    [    1.053927] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [    1.056137] device-mapper: multipath: version 1.1.0 loaded
    [    1.056142] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    1.056315] EISA: Probing bus 0 at eisa.0
    [    1.056321] EISA: Cannot allocate resource for mainboard
    [    1.056325] Cannot allocate resource for EISA slot 1
    [    1.056327] Cannot allocate resource for EISA slot 2
    [    1.056337] Cannot allocate resource for EISA slot 5
    [    1.056340] Cannot allocate resource for EISA slot 6
    [    1.056350] EISA: Detected 0 cards.
    [    1.060103] cpuidle: using governor ladder
    [    1.060107] cpuidle: using governor menu
    [    1.060710] TCP cubic registered
    [    1.060882] NET: Registered protocol family 10
    [    1.061469] lo: Disabled Privacy Extensions
    [    1.061870] NET: Registered protocol family 17
    [    1.061940] Using IPI No-Shortcut mode
    [    1.062061] PM: Resume from disk failed.
    [    1.062076] registered taskstats version 1
    [    1.062390]   Magic number: 6:281:954
    [    1.062470] rtc_cmos 00:05: setting system clock to 2010-08-02 21:54:40 UTC (1280786080)
    [    1.062474] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.062477] EDD information not available.
    [    1.219068] ata3.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
    [    1.219073] ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
    [    1.224446] ata3.00: configured for UDMA/133
    [    1.237977] Freeing initrd memory: 7772k freed
    [    1.372605] isapnp: No Plug & Play device found
    [    1.374926] scsi 0:0:0:0: CD-ROM            PHILIPS  DVD+-RW DVD8801  4D28 PQ: 0 ANSI: 5
    [    1.383507] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [    1.383512] Uniform CD-ROM driver Revision: 3.20
    [    1.383643] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.383728] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.383903] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ/ ZM10 PQ: 0 ANSI: 5
    [    1.384066] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [    1.384170] sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
    [    1.384241] sd 2:0:0:0: [sda] Write Protect is off
    [    1.384245] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.384282] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.384462]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    [    1.437975] sd 2:0:0:0: [sda] Attached SCSI disk
    [    1.437992] Freeing unused kernel memory: 656k freed
    [    1.438402] Write protecting the kernel text: 4676k
    [    1.438434] Write protecting the kernel read-only data: 1840k
    [    1.460456] udev: starting version 151
    [    1.652045] usb 1-5: new high speed USB device using ehci_hcd and address 5
    [    1.664088] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [    1.664093] e100: Copyright(c) 1999-2006 Intel Corporation
    [    1.664138] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    1.688616] e100 0000:03:08.0: PME# disabled
    [    1.700108] e100: eth0: e100_probe: addr 0xdfbef000, irq 20, MAC addr 00:16:76:43:d9:e7
    [    1.786242] usb 1-5: configuration #1 chosen from 1 choice
    [    1.796523] Initializing USB Mass Storage driver...
    [    1.796652] scsi4 : SCSI emulation for USB Mass Storage devices
    [    1.796838] usbcore: registered new interface driver usb-storage
    [    1.796843] USB Mass Storage support registered.
    [    1.797273] usb-storage: device found at 5
    [    1.797276] usb-storage: waiting for device to settle before scanning
    [    1.896018] usb 1-6: new high speed USB device using ehci_hcd and address 6
    [    2.044621] usb 1-6: configuration #1 chosen from 1 choice
    [    2.284018] usb 2-2: new low speed USB device using uhci_hcd and address 2
    [    2.351963] EXT4-fs (sda5): mounted filesystem with ordered data mode
    [    2.462884] usb 2-2: configuration #1 chosen from 1 choice
    [    2.704021] usb 3-1: new full speed USB device using uhci_hcd and address 2
    [    2.874206] usb 3-1: configuration #1 chosen from 1 choice
    [    2.882107] hub 3-1:1.0: USB hub found
    [    2.883085] hub 3-1:1.0: 3 ports detected
    [    3.128048] usb 3-2: new low speed USB device using uhci_hcd and address 3
    [    3.296213] usb 3-2: configuration #1 chosen from 1 choice
    [    3.373094] usb 3-1.1: new full speed USB device using uhci_hcd and address 4
    [    3.508208] usb 3-1.1: configuration #1 chosen from 1 choice
    [    6.796177] usb-storage: device scan complete
    [    6.796909] scsi 4:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
    [    6.797506] sd 4:0:0:0: Attached scsi generic sg2 type 0
    [    6.798888] sd 4:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
    [    6.799385] sd 4:0:0:0: [sdb] Write Protect is off
    [    6.799389] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
    [    6.799392] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [    6.802632] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [    6.802637]  sdb: sdb1
    [    6.804509] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [    6.804514] sd 4:0:0:0: [sdb] Attached SCSI removable disk
    [   11.594478] udev: starting version 151
    [   11.632426] Adding 248824k swap on /dev/sda6.  Priority:-1 extents:1 across:248824k 
    [   11.710857] lp: driver loaded but no devices found
    [   11.898246] intel_rng: Firmware space is locked read-only. If you can't or
    [   11.898249] intel_rng: don't want to disable this in firmware setup, and if
    [   11.898250] intel_rng: you are certain that your system has a functional
    [   11.898252] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [   11.898411] Linux agpgart interface v0.103
    [   12.180822] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [   12.181841] [drm] Initialized drm 1.1.0 20060810
    [   12.183624] agpgart-intel 0000:00:00.0: Intel 915G Chipset
    [   12.183906] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    [   12.255601] cfg80211: Calling CRDA to update world regulatory domain
    [   12.263192] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [   12.298193] usbcore: registered new interface driver hiddev
    [   12.305492] cfg80211: World regulatory domain updated:
    [   12.305497] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   12.305501] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.305505] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   12.305508] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   12.305512] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.305515] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   12.311464] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
    [   12.311617] generic-usb 0003:0461:4D15.0002: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
    [   12.314656] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input4
    [   12.314776] generic-usb 0003:413C:2010.0003: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.1/input0
    [   12.326687] dell-wmi: No known WMI GUID found
    [   12.327044] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input5
    [   12.327171] generic-usb 0003:413C:2010.0004: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.1/input1
    [   12.327208] usbcore: registered new interface driver usbhid
    [   12.327213] usbhid: v2.6:USB HID core driver
    [   12.369540] type=1505 audit(1280800491.805:2):  operation="profile_load" pid=511 name="/sbin/dhclient3"
    [   12.370277] type=1505 audit(1280800491.805:3):  operation="profile_load" pid=511 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   12.370671] type=1505 audit(1280800491.805:4):  operation="profile_load" pid=511 name="/usr/lib/connman/scripts/dhclient-script"
    [   12.532219] input: Logitech Logitech RumblePad 2 USB as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    [   12.532394] logitech 0003:046D:C218.0001: input,hidraw3: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.0-2/input0
    [   12.532408] logitech 0003:046D:C218.0001: Force feedback for Logitech Rumblepad 2 by Anssi Hannula <anssi.hannula@gmail.com>
    [   12.630761] nouveau 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [   12.652277] [drm] nouveau 0000:03:01.0: Detected an NV40 generation card (0x04a100a1)
    [   12.652662] [drm] nouveau 0000:03:01.0: Attempting to load BIOS image from PROM
    [   13.243534] [drm] nouveau 0000:03:01.0: ... appears to be valid
    [   13.243539] [drm] nouveau 0000:03:01.0: BIT BIOS found
    [   13.243543] [drm] nouveau 0000:03:01.0: Bios version 05.44.a2.10
    [   13.243547] [drm] nouveau 0000:03:01.0: BIT table 'd' not found
    [   13.243551] [drm] nouveau 0000:03:01.0: Found Display Configuration Block version 3.0
    [   13.243555] [drm] nouveau 0000:03:01.0: DCB connector table: VHER 0x30 5 7 2
    [   13.243559] [drm] nouveau 0000:03:01.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
    [   13.243563] [drm] nouveau 0000:03:01.0:   1: 0x00002230: type 0x30 idx 2 tag 0x08
    [   13.243567] [drm] nouveau 0000:03:01.0:   2: 0x00000110: type 0x10 idx 1 tag 0xff
    [   13.243570] [drm] nouveau 0000:03:01.0:   3: 0x00000111: type 0x11 idx 1 tag 0xff
    [   13.243574] [drm] nouveau 0000:03:01.0:   4: 0x00000113: type 0x13 idx 1 tag 0xff
    [   13.243577] [drm] nouveau 0000:03:01.0: Raw DCB entry 0: 01000300 00000028
    [   13.243581] [drm] nouveau 0000:03:01.0: Raw DCB entry 1: 01000302 00000020
    [   13.243584] [drm] nouveau 0000:03:01.0: Raw DCB entry 2: 02011310 00000028
    [   13.243587] [drm] nouveau 0000:03:01.0: Raw DCB entry 3: 020223f1 00c0c030
    [   13.243597] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 0 at offset 0xDEB0
    [   13.358731] phy0: Selected rate control algorithm 'minstrel'
    [   13.359653] Registered led device: rt2800usb-phy0::radio
    [   13.359679] Registered led device: rt2800usb-phy0::assoc
    [   13.359704] Registered led device: rt2800usb-phy0::quality
    [   13.360269] usbcore: registered new interface driver rt2800usb
    [   13.361383] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
    [   13.378939] type=1505 audit(1280800492.813:5):  operation="profile_load" pid=660 name="/usr/share/gdm/guest-session/Xsession"
    [   13.385509] type=1505 audit(1280800492.821:6):  operation="profile_replace" pid=662 name="/sbin/dhclient3"
    [   13.386260] type=1505 audit(1280800492.821:7):  operation="profile_replace" pid=662 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [   13.386662] type=1505 audit(1280800492.821:8):  operation="profile_replace" pid=662 name="/usr/lib/connman/scripts/dhclient-script"
    [   13.390748] rtusb init --->
    [   13.390860] usbcore: registered new interface driver rt2870
    [   13.422220] type=1505 audit(1280800492.857:9):  operation="profile_load" pid=663 name="/usr/bin/evince"
    [   13.497330] type=1505 audit(1280800492.933:10):  operation="profile_load" pid=663 name="/usr/bin/evince-previewer"
    [   13.528375] type=1505 audit(1280800492.965:11):  operation="profile_load" pid=663 name="/usr/bin/evince-thumbnailer"
    [   13.567189] rt2800usb 1-6:1.0: firmware: requesting rt2870.bin
    [   13.623632] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   13.623676] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   13.643868] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 1 at offset 0xE19E
    [   13.700285] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 2 at offset 0xE6D8
    [   13.700323] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 3 at offset 0xE835
    [   13.708209] [drm] nouveau 0000:03:01.0: Parsing VBIOS init table 4 at offset 0xE9BE
    [   13.739973] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [   13.740511] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   13.740831] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [   13.741128] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [   13.809700] [TTM] Zone  kernel: Available graphics memory: 249672 kiB.
    [   13.809716] [drm] nouveau 0000:03:01.0: 256 MiB VRAM
    [   13.813840] [drm] nouveau 0000:03:01.0: 64 MiB GART (aperture)
    [   13.816465] [drm] nouveau 0000:03:01.0: Allocating FIFO number 0
    [   13.819212] [drm] nouveau 0000:03:01.0: nouveau_channel_alloc: initialised FIFO 0
    [   13.819227] [drm] nouveau 0000:03:01.0: Initial CRTC_OWNER is 0
    [   13.819240] [drm] nouveau 0000:03:01.0: Saving VGA fonts
    [   13.988344] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   14.029923] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.085525] [drm] nouveau 0000:03:01.0: Detected a DVI-I connector
    [   14.085830] [drm] nouveau 0000:03:01.0: Detected a VGA connector
    [   14.086033] [drm] nouveau 0000:03:01.0: Detected a TV connector
    [   14.090145] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on vga encoder (output 0)
    [   14.090151] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on tmds encoder (output 1)
    [   14.090155] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on vga encoder (output 2)
    [   14.090160] [drm] nouveau 0000:03:01.0: Setting dpms mode 3 on TV encoder (output 3)
    [   14.145054] ppdev: user-space parallel port driver
    [   14.292242] [drm] nouveau 0000:03:01.0: allocated 1280x1024 fb: 0x49000, bo d5695600
    [   14.292368] fb0: nouveaufb frame buffer device
    [   14.292371] registered panic notifier
    [   14.292378] [drm] Initialized nouveau 0.0.15 20090420 for 0000:03:01.0 on minor 0
    [   14.294837] vga16fb: initializing
    [   14.294842] vga16fb: mapped to 0xc00a0000
    [   14.294847] vga16fb: not registering due to another framebuffer present
    [   14.353835] [drm] nouveau 0000:03:01.0: Setting dpms mode 0 on vga encoder (output 2)
    [   14.353843] [drm] nouveau 0000:03:01.0: Output VGA-1 is running on CRTC 0 using output B
    [   14.385024] Console: switching to colour frame buffer device 160x64
    [   14.922185] CPU0 attaching NULL sched-domain.
    [   14.922271] CPU0 attaching NULL sched-domain.
    [   15.590968] [drm] nouveau 0000:03:01.0: Allocating FIFO number 1
    [   15.593321] [drm] nouveau 0000:03:01.0: nouveau_channel_alloc: initialised FIFO 1
    [   18.105042] CPU0 attaching NULL sched-domain.
    [   18.105128] CPU0 attaching NULL sched-domain.
    [   26.936840] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    [   26.939367] wlan0: direct probe to AP b0:e7:54:6e:cb:d1 (try 1)
    [   26.941778] wlan0: direct probe responded
    [   26.941784] wlan0: authenticate with AP b0:e7:54:6e:cb:d1 (try 1)
    [   26.943181] wlan0: authenticated
    [   26.943208] wlan0: associate with AP b0:e7:54:6e:cb:d1 (try 1)
    [   26.945204] wlan0: RX AssocResp from b0:e7:54:6e:cb:d1 (capab=0x431 status=0 aid=1)
    [   26.945209] wlan0: associated
    [   26.975738] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   26.975808] cfg80211: Calling CRDA for country: US
    [   26.990507] cfg80211: Received country IE:
    [   26.990512] cfg80211: Regulatory domain: US
    [   26.990515] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   26.990519] 	(2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
    [   26.990521] cfg80211: CRDA thinks this should applied:
    [   26.990524] cfg80211: Regulatory domain: US
    [   26.990526] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   26.990529] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   26.990532] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
    [   26.990536] 	(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   26.990539] 	(5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   26.990542] 	(5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   26.990545] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
    [   26.990548] cfg80211: We intersect both of these and get:
    [   26.990550] cfg80211: Regulatory domain: 98
    [   26.990552] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   26.990555] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   26.990561] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE
    [   26.990564] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE
    [   26.990567] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE
    [   26.990572] cfg80211: Current regulatory domain updated by AP to: US
    [   26.990575] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   26.990578] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   28.129209] padlock: VIA PadLock not detected.
    [   37.488009] wlan0: no IPv6 routers present
    [   73.783646] wlan0: deauthenticating from b0:e7:54:6e:cb:d1 by local choice (reason=3)
    Also, I'll be leaving my house (and more importantly, my computer) tomorrow. I'll be back in a week or so... so I'll bump this thread when I'm back, or maybe just try a different distro.

  5. #15
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Okie dokie, we'll still be here waiting for you. In the meantime, I'll try to post something useful.
    I think the rt2800 module might be interfering. So blacklist it with these commands.
    Code:
    sudo gedit /etc/modprobe.d/blacklist.conf
    Add a single line:
    Code:
    rt2800usb
    Save, exit and Reboot
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  6. #16
    Just Joined!
    Join Date
    Jul 2010
    Posts
    13
    Well that was much less than a week. Anyway, I'm afraid that didn't work either.

  7. #17
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Just a wild guess, is this a laptop? is there a switch to activate the wireless?
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  8. #18
    Just Joined!
    Join Date
    Jul 2010
    Posts
    13
    Nope, it's a desktop.

    I think I'm going to try changing the security to WEP if everyone else is good with it. (My dad would NOT turn the security off completely, I don't think )

  9. #19
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Was blacklisting the rt2800usb successful? Is it still loading? You can check with the lsmod command.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  10. #20
    Just Joined!
    Join Date
    Jul 2010
    Posts
    13
    Apparently not, adding the word 'blacklist' worked.
    But the result is still the same!

Page 2 of 3 FirstFirst 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •