dell 1525 to linux wireless, think the same problem

**figarokj** · 08-19-2010

I think i have the same problem as everyone do. Asks the password, but doesn't connect. With Broadcom driver. Last OS was Vista.

00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02)
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02)
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Kernel modules: i2c-i801
02:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
02:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
02:09.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
02:09.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
Kernel driver in use: sky2
Kernel modules: sky2
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Kernel driver in use: wl
Kernel modules: wl, ssb

**figarokj** · 08-19-2010

Code:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f66d800 (usable)
[    0.000000]  BIOS-e820: 000000007f66d800 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x7f66d max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
[    0.000000]   2 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009f000 (usable)
[    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f66d800 (usable)
[    0.000000]  modified: 000000007f66d800 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  modified: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 372dd000 - 37fefad4
[    0.000000] Allocated new RAMDISK: 008de000 - 015f0ad4
[    0.000000] Move RAMDISK from 00000000372dd000 - 0000000037fefad3 to 008de000 - 015f0ad3
[    0.000000] ACPI: RSDP 000fbc60 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 7f66f200 00064 (v01 DELL    M08     27D80614 ASL  00000061)
[    0.000000] ACPI: FACP 7f66f09c 000F4 (v04 DELL    M08     27D80614 ASL  00000061)
[    0.000000] ACPI: DSDT 7f66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 7f67e000 00040
[    0.000000] ACPI: HPET 7f66f300 00038 (v01 DELL    M08     00000001 ASL  00000061)
[    0.000000] ACPI: APIC 7f66f400 00068 (v01 DELL    M08     27D80614 ASL  00000047)
[    0.000000] ACPI: MCFG 7f66f3c0 0003E (v16 DELL    M08     27D80614 ASL  00000061)
[    0.000000] ACPI: SLIC 7f66f49c 00176 (v01 DELL    M08     27D80614 ASL  00000061)
[    0.000000] ACPI: OSFR 7f66ea00 0002C (v01 DELL    M08     27D80614 ASL  00000061)
[    0.000000] ACPI: BOOT 7f66efc0 00028 (v01 DELL    M08     27D80614 ASL  00000061)
[    0.000000] ACPI: SSDT 7f66d9c0 004CC (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #5 [00008da000 - 00008dd184]              BRK ==> [00008da000 - 00008dd184]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [00008de000 - 00015f0ad4]      NEW RAMDISK ==> [00008de000 - 00015f0ad4]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f66d
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f66d
[    0.000000] On node 0 totalpages: 521736
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c15f2000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2301 pages used for memmap
[    0.000000]   HighMem zone: 292210 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36024 r0 d21320 u2097152
[    0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517659
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5d2a1e40-da6b-4d0d-90b3-7767162848f9 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10436740 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f66d)
[    0.000000] Memory: 2036976k/2087348k available (4673k kernel code, 48940k reserved, 2122k data, 656k init, 1178044k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1862.027 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.05 BogoMIPS (lpj=7448108)
[    0.004026] Security Framework initialized
[    0.004051] AppArmor: AppArmor initialized
[    0.004059] Mount-cache hash table entries: 512
[    0.004209] Initializing cgroup subsys ns
[    0.004214] Initializing cgroup subsys cpuacct
[    0.004219] Initializing cgroup subsys memory
[    0.004227] Initializing cgroup subsys devices
[    0.004230] Initializing cgroup subsys freezer
[    0.004233] Initializing cgroup subsys net_cls
[    0.004255] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004259] CPU: L2 cache: 1024K
[    0.004262] CPU: Physical Processor ID: 0
[    0.004264] CPU: Processor Core ID: 0
[    0.004268] mce: CPU supports 6 MCE banks
[    0.004278] CPU0: Thermal monitoring enabled (TM2)
[    0.004282] using mwait in idle threads.
[    0.004290] Performance Events: Core2 events, Intel PMU driver.
[    0.004301] ... version:                2
[    0.004303] ... bit width:              40
[    0.004305] ... generic registers:      2
[    0.004307] ... value mask:             000000ffffffffff
[    0.004309] ... max period:             000000007fffffff
[    0.004311] ... fixed-purpose events:   3
[    0.004313] ... event mask:             0000000700000003
[    0.004319] Checking 'hlt' instruction... OK.
[    0.022973] ACPI: Core revision 20090903
[    0.034968] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.034974] ftrace: allocating 21771 entries in 43 pages
[    0.036073] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036466] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.078482] CPU0: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
[    0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 1024K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.164065] CPU1: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
[    0.164079] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.168021] Brought up 2 CPUs
[    0.168024] Total of 2 processors activated (7447.99 BogoMIPS).
[    0.168423] CPU0 attaching sched-domain:
[    0.168426]  domain 0: span 0-1 level MC
[    0.168429]   groups: 0 1
[    0.168437] CPU1 attaching sched-domain:
[    0.168439]  domain 0: span 0-1 level MC
[    0.168442]   groups: 1 0
[    0.168553] devtmpfs: initialized
[    0.168553] regulator: core version 0.5
[    0.168553] Time:  9:04:56  Date: 08/19/10
[    0.168553] NET: Registered protocol family 16
[    0.168553] Trying to unpack rootfs image as initramfs...
[    0.168553] EISA bus registered
[    0.168553] ACPI: bus type pci registered
[    0.168553] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.168553] PCI: MCFG area at f8000000 reserved in E820
[    0.168553] PCI: Using MMCONFIG for extended config space
[    0.168553] PCI: Using configuration type 1 for base access
[    0.172138] bio: create slab <bio-0> at 0
[    0.173168] ACPI: EC: Look up EC in DSDT
[    0.199027] ACPI: Interpreter enabled
[    0.199038] ACPI: (supports S0 S3 S4 S5)
[    0.199065] ACPI: Using IOAPIC for interrupt routing
[    0.246650] ACPI: No dock devices found.
[    0.266341] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.266503] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
[    0.266513] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.266520] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff]
[    0.266573] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
[    0.266713] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
[    0.266792] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
[    0.266880] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[    0.266959] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.266966] pci 0000:00:1a.7: PME# disabled
[    0.267033] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[    0.267108] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.267114] pci 0000:00:1b.0: PME# disabled
[    0.267230] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.267236] pci 0000:00:1c.0: PME# disabled
[    0.267357] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.267363] pci 0000:00:1c.1: PME# disabled
[    0.267486] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.267492] pci 0000:00:1c.4: PME# disabled
[    0.267571] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
[    0.267652] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
[    0.267735] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[    0.267820] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[    0.267897] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.267904] pci 0000:00:1d.7: PME# disabled
[    0.268135] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.268141] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[    0.268146] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.268151] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007)
[    0.268157] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.268221] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[    0.268231] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[    0.268241] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[    0.268250] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[    0.268260] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
[    0.268350] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
[    0.268360] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
[    0.268369] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
[    0.268379] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
[    0.268388] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
[    0.268398] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff]
[    0.268451] pci 0000:00:1f.2: PME# supported from D3hot
[    0.268456] pci 0000:00:1f.2: PME# disabled
[    0.268499] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff]
[    0.268529] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
[    0.268654] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
[    0.268668] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff]
[    0.268769] pci 0000:09:00.0: supports D1 D2
[    0.268771] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.268779] pci 0000:09:00.0: PME# disabled
[    0.268874] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[    0.268880] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[    0.269106] pci 0000:0b:00.0: reg 10 64bit mmio: [0xfe7fc000-0xfe7fffff]
[    0.269342] pci 0000:0b:00.0: supports D1 D2
[    0.269345] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[    0.269357] pci 0000:0b:00.0: PME# disabled
[    0.269514] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[    0.269597] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[    0.269603] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff]
[    0.269613] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[    0.269686] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff]
[    0.269759] pci 0000:02:09.0: supports D1 D2
[    0.269761] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269767] pci 0000:02:09.0: PME# disabled
[    0.269818] pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff]
[    0.269895] pci 0000:02:09.1: supports D1 D2
[    0.269898] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269904] pci 0000:02:09.1: PME# disabled
[    0.269956] pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff]
[    0.270030] pci 0000:02:09.2: supports D1 D2
[    0.270032] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.270038] pci 0000:02:09.2: PME# disabled
[    0.270089] pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff]
[    0.270161] pci 0000:02:09.3: supports D1 D2
[    0.270163] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.270169] pci 0000:02:09.3: PME# disabled
[    0.270237] pci 0000:00:1e.0: transparent bridge
[    0.270247] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff]
[    0.270287] pci_bus 0000:00: on NUMA node 0
[    0.270302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.270625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.270783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.270868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.270958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.285994] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.286137] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[    0.286268] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[    0.286388] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[    0.286525] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.286660] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.286799] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.286920] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.287070] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.287091] vgaarb: loaded
[    0.287235] SCSI subsystem initialized
[    0.287353] libata version 3.00 loaded.
[    0.287436] usbcore: registered new interface driver usbfs
[    0.287450] usbcore: registered new interface driver hub
[    0.287483] usbcore: registered new device driver usb
[    0.287685] ACPI: WMI: Mapper loaded
[    0.287687] PCI: Using ACPI for IRQ routing
[    0.288027] NetLabel: Initializing
[    0.288029] NetLabel:  domain hash size = 128
[    0.288031] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.288045] NetLabel:  unlabeled traffic allowed by default
[    0.288094] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.288100] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.292112] Switching to clocksource tsc
[    0.294444] AppArmor: AppArmor Filesystem Enabled
[    0.294467] pnp: PnP ACPI init
[    0.294491] ACPI: bus type pnp registered
[    0.315268] pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.315273] pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.315412] pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.315416] pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.315420] pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.315424] pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[    0.338233] pnp: PnP ACPI: found 13 devices
[    0.338237] ACPI: ACPI bus type pnp unregistered
[    0.338242] PnPBIOS: Disabled by ACPI PNP
[    0.338260] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved
[    0.338263] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved
[    0.338273] system 00:06: ioport range 0xc80-0xcff could not be reserved
[    0.338282] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.338289] system 00:0a: ioport range 0x900-0x97f has been reserved
[    0.338292] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    0.338299] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[    0.338303] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[    0.338306] system 00:0b: ioport range 0x10c0-0x10df has been reserved
[    0.338309] system 00:0b: ioport range 0x809-0x809 has been reserved
[    0.338317] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[    0.338320] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[    0.338323] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[    0.338327] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.338330] system 00:0c: iomem range 0x100000-0x7f66d7ff could not be reserved
[    0.338333] system 00:0c: iomem range 0x7f66d800-0x7f6fffff has been reserved
[    0.338337] system 00:0c: iomem range 0x7f700000-0x7f7fffff has been reserved
[    0.338340] system 00:0c: iomem range 0x7f700000-0x7fefffff could not be reserved
[    0.338344] system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved
[    0.338347] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
[    0.338351] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
[    0.338354] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
[    0.338358] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.338361] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
[    0.338364] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
[    0.338368] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
[    0.338371] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[    0.338374] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
[    0.338378] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.373200] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09
[    0.373206] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
[    0.373214] pci 0000:00:1c.0:   MEM window: 0xfe800000-0xfe8fffff
[    0.373220] pci 0000:00:1c.0:   PREFETCH window: 0x00000080000000-0x000000801fffff
[    0.373230] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b
[    0.373234] pci 0000:00:1c.1:   IO window: 0x2000-0x2fff
[    0.373242] pci 0000:00:1c.1:   MEM window: 0xfe700000-0xfe7fffff
[    0.373248] pci 0000:00:1c.1:   PREFETCH window: 0x00000080200000-0x000000803fffff
[    0.373258] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c
[    0.373262] pci 0000:00:1c.4:   IO window: 0xc000-0xcfff
[    0.373270] pci 0000:00:1c.4:   MEM window: 0xfe400000-0xfe6fffff
[    0.373277] pci 0000:00:1c.4:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
[    0.373288] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.373290] pci 0000:00:1e.0:   IO window: disabled
[    0.373298] pci 0000:00:1e.0:   MEM window: 0xfe300000-0xfe3fffff
[    0.373304] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.373333]   alloc irq_desc for 16 on node -1
[    0.373336]   alloc kstat_irqs on node -1
[    0.373344] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.373352] pci 0000:00:1c.0: setting latency timer to 64
[    0.373364]   alloc irq_desc for 17 on node -1
[    0.373366]   alloc kstat_irqs on node -1
[    0.373370] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.373377] pci 0000:00:1c.1: setting latency timer to 64
[    0.373389] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.373395] pci 0000:00:1c.4: setting latency timer to 64
[    0.373406] pci 0000:00:1e.0: setting latency timer to 64
[    0.373412] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.373415] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.373418] pci_bus 0000:09: resource 0 io:  [0xd000-0xdfff]
[    0.373421] pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe8fffff]
[    0.373424] pci_bus 0000:09: resource 2 pref mem [0x80000000-0x801fffff]
[    0.373427] pci_bus 0000:0b: resource 0 io:  [0x2000-0x2fff]
[    0.373430] pci_bus 0000:0b: resource 1 mem: [0xfe700000-0xfe7fffff]
[    0.373433] pci_bus 0000:0b: resource 2 pref mem [0x80200000-0x803fffff]
[    0.373436] pci_bus 0000:0c: resource 0 io:  [0xc000-0xcfff]
[    0.373439] pci_bus 0000:0c: resource 1 mem: [0xfe400000-0xfe6fffff]
[    0.373442] pci_bus 0000:0c: resource 2 pref mem [0xf0000000-0xf01fffff]
[    0.373445] pci_bus 0000:02: resource 1 mem: [0xfe300000-0xfe3fffff]
[    0.373447] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.373450] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.373498] NET: Registered protocol family 2
[    0.373621] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.374031] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.374696] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.375102] TCP: Hash tables configured (established 131072 bind 65536)
[    0.375106] TCP reno registered
[    0.375234] NET: Registered protocol family 1
[    0.375266] pci 0000:00:02.0: Boot video device
[    0.375519] Simple Boot Flag at 0x79 set to 0x1
[    0.375727] cpufreq-nforce2: No nForce2 chipset.
[    0.375760] Scanning for low memory corruption every 60 seconds
[    0.375891] audit: initializing netlink socket (disabled)
[    0.375905] type=2000 audit(1282208695.375:1): initialized
[    0.386745] highmem bounce pool size: 64 pages
[    0.386751] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.388555] VFS: Disk quotas dquot_6.5.2
[    0.388635] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.389295] fuse init (API version 7.13)
[    0.389393] msgmni has been set to 1679
[    0.389659] alg: No test for stdrng (krng)
[    0.389726] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.389729] io scheduler noop registered
[    0.389732] io scheduler anticipatory registered
[    0.389734] io scheduler deadline registered
[    0.389780] io scheduler cfq registered (default)
[    0.389987]   alloc irq_desc for 24 on node -1
[    0.389990]   alloc kstat_irqs on node -1
[    0.390006] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.390020] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.390209]   alloc irq_desc for 25 on node -1
[    0.390211]   alloc kstat_irqs on node -1
[    0.390221] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.390234] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.390418]   alloc irq_desc for 26 on node -1
[    0.390420]   alloc kstat_irqs on node -1
[    0.390431] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[    0.390444] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.390567] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.390679] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.390832] ACPI: AC Adapter [AC] (on-line)
[    0.390919] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.391847] ACPI: Lid Switch [LID]
[    0.391901] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.391908] ACPI: Power Button [PBTN]
[    0.391958] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.391961] ACPI: Sleep Button [SBTN]
[    0.392708] ACPI: SSDT 7f66e4f6 00286 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.393276] ACPI: SSDT 7f66de8c 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.393737] Monitor-Mwait will be used to enter C-1 state
[    0.393773] Monitor-Mwait will be used to enter C-2 state
[    0.393802] Monitor-Mwait will be used to enter C-3 state
[    0.393809] Marking TSC unstable due to TSC halts in idle
[    0.393888] processor LNXCPU:00: registered as cooling_device0
[    0.394276] ACPI: SSDT 7f66e77c 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.394631] ACPI: SSDT 7f66e471 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.394945] Switching to clocksource hpet
[    0.401423] processor LNXCPU:01: registered as cooling_device1
[    0.403736] thermal LNXTHERM:01: registered as thermal_zone0
[    0.403749] ACPI: Thermal Zone [THM] (56 C)
[    0.405542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.407126] brd: module loaded
[    0.407655] loop: module loaded
[    0.407766] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.407887] ata_piix 0000:00:1f.1: version 2.13
[    0.407904] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.407955] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.408113] scsi0 : ata_piix
[    0.408211] scsi1 : ata_piix
[    0.408918] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    0.408922] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    0.409311] Fixed MDIO Bus: probed
[    0.409352] PPP generic driver version 2.4.2
[    0.409409] tun: Universal TUN/TAP device driver, 1.6
[    0.409411] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.409511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.409541]   alloc irq_desc for 22 on node -1
[    0.409543]   alloc kstat_irqs on node -1
[    0.409553] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.409580] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.409584] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.409633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.409671] ehci_hcd 0000:00:1a.7: debug port 1
[    0.413550] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.413633] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    0.424784] isapnp: Scanning for PnP cards...
[    0.432456] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.432759] usb usb1: configuration #1 chosen from 1 choice
[    0.432792] hub 1-0:1.0: USB hub found
[    0.432805] hub 1-0:1.0: 4 ports detected
[    0.433055]   alloc irq_desc for 20 on node -1
[    0.433058]   alloc kstat_irqs on node -1
[    0.433068] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.433095] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.433101] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.433148] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.433193] ehci_hcd 0000:00:1d.7: debug port 1
[    0.437077] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.437120] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    0.444439] ACPI: Battery Slot [BAT0] (battery present)
[    0.444646] ata2: port disabled. ignoring.
[    0.452072] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.452217] usb usb2: configuration #1 chosen from 1 choice
[    0.452251] hub 2-0:1.0: USB hub found
[    0.452262] hub 2-0:1.0: 6 ports detected
[    0.452346] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.452369] uhci_hcd: USB Universal Host Controller Interface driver
[    0.452424] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.452435] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.452440] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.452485] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.452520] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    0.452620] usb usb3: configuration #1 chosen from 1 choice
[    0.452651] hub 3-0:1.0: USB hub found
[    0.452659] hub 3-0:1.0: 2 ports detected
[    0.452712]   alloc irq_desc for 21 on node -1
[    0.452714]   alloc kstat_irqs on node -1
[    0.452722] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.452730] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.452734] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.452770] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.452811] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    0.452923] usb usb4: configuration #1 chosen from 1 choice
[    0.452951] hub 4-0:1.0: USB hub found
[    0.452958] hub 4-0:1.0: 2 ports detected
[    0.453014] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.453022] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.453026] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.453062] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.453092] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    0.453191] usb usb5: configuration #1 chosen from 1 choice
[    0.453219] hub 5-0:1.0: USB hub found
[    0.453226] hub 5-0:1.0: 2 ports detected
[    0.453277] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.453285] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.453289] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.453323] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.453354] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    0.453454] usb usb6: configuration #1 chosen from 1 choice
[    0.453482] hub 6-0:1.0: USB hub found
[    0.453493] hub 6-0:1.0: 2 ports detected
[    0.453548] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.453555] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.453559] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.453593] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.453624] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    0.453726] usb usb7: configuration #1 chosen from 1 choice
[    0.453754] hub 7-0:1.0: USB hub found
[    0.453761] hub 7-0:1.0: 2 ports detected
[    0.453882] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.468164] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.536276] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.536290] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.536341] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.536366] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.536389] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.536548] mice: PS/2 mouse device common for all mice
[    0.536712] rtc_cmos 00:04: RTC can wake from S4
[    0.536760] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.536796] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.536926] device-mapper: uevent: version 1.0.3
[    0.537091] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.561102] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.668709] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D400, max UDMA/33
[    0.668879] Freeing initrd memory: 13386k freed
[    0.668941] device-mapper: multipath: version 1.1.0 loaded
[    0.668948] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.678709] EISA: Probing bus 0 at eisa.0
[    0.678720] Cannot allocate resource for EISA slot 1
[    0.678723] Cannot allocate resource for EISA slot 2
[    0.678754] EISA: Detected 0 cards.
[    0.678937] cpuidle: using governor ladder
[    0.679069] cpuidle: using governor menu
[    0.679590] TCP cubic registered
[    0.679761] NET: Registered protocol family 10
[    0.680324] lo: Disabled Privacy Extensions
[    0.680705] NET: Registered protocol family 17
[    0.681326] Using IPI No-Shortcut mode
[    0.681432] PM: Resume from disk failed.
[    0.681446] registered taskstats version 1
[    0.682128]   Magic number: 6:904:70
[    0.682237] rtc_cmos 00:04: setting system clock to 2010-08-19 09:04:56 UTC (1282208696)
[    0.682240] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.682242] EDD information not available.
[    0.745336] ata1.00: configured for UDMA/33
[    0.745432] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    0.844126] isapnp: No Plug & Play device found
[    0.876095] scsi 0:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D400 PQ: 0 ANSI: 5
[    0.881536] usb 1-1: configuration #1 chosen from 1 choice
[    1.026519] sr0: scsi3-mmc drive: 47x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.026523] Uniform CD-ROM driver Revision: 3.20
[    1.026641] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.026694] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.026757] Freeing unused kernel memory: 656k freed
[    1.027199] Write protecting the kernel text: 4676k
[    1.027259] Write protecting the kernel read-only data: 1840k
[    1.050152] udev: starting version 151
[    1.140581] Linux agpgart interface v0.103
[    1.173806] ahci 0000:00:1f.2: version 3.0
[    1.173831] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.173887]   alloc irq_desc for 27 on node -1
[    1.173890]   alloc kstat_irqs on node -1
[    1.173904] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    1.173988] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[    1.173992] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    1.173999] ahci 0000:00:1f.2: setting latency timer to 64
[    1.187382] scsi2 : ahci
[    1.203650] scsi3 : ahci
[    1.221315] scsi4 : ahci
[    1.221639] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 27
[    1.221642] ata4: DUMMY
[    1.221646] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 27
[    1.221740] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    1.222165] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    1.229026] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    1.251664] [drm] Initialized drm 1.1.0 20060810
[    1.254849] sky2 driver version 1.25
[    1.254902] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.254923] sky2 0000:09:00.0: setting latency timer to 64
[    1.254960] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[    1.255087]   alloc irq_desc for 28 on node -1
[    1.255090]   alloc kstat_irqs on node -1
[    1.255110] sky2 0000:09:00.0: irq 28 for MSI/MSI-X
[    1.256054] sky2 eth0: addr 00:21:9b:dd:ca:a4
[    1.384068] usb 6-2: new full speed USB device using uhci_hcd and address 2
[    1.540095] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.548054] ata5: SATA link down (SStatus 0 SControl 300)
[    1.558532] usb 6-2: configuration #1 chosen from 1 choice
[    1.572232] ata3.00: ATA-8: WDC WD1600BEVT-75ZCT1, 11.01A11, max UDMA/133
[    1.572236] ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[    1.573687] ata3.00: configured for UDMA/133
[    1.575216] usbcore: registered new interface driver hiddev
[    1.577686] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input5
[    1.577798] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[    1.582537] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input6
[    1.582689] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[    1.582722] usbcore: registered new interface driver usbhid
[    1.582725] usbhid: v2.6:USB HID core driver
[    1.588207] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-7 11.0 PQ: 0 ANSI: 5
[    1.588389] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.588417] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.588500] sd 2:0:0:0: [sda] Write Protect is off
[    1.588503] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.588531] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.588760]  sda: sda1 sda2 < sda5 >
[    1.624249] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.652282] ohci1394 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.655363] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.655372] i915 0000:00:02.0: setting latency timer to 64
[    1.660239]   alloc irq_desc for 29 on node -1
[    1.660243]   alloc kstat_irqs on node -1
[    1.660254] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[    1.660262] [drm] set up 7M of stolen space
[    1.711058] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fe3ff800-fe3fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    2.136391] [drm] initialized overlay support
[    2.863331] fb0: inteldrmfb frame buffer device
[    2.863334] registered panic notifier
[    2.876619] acpi device:2f: registered as cooling_device2
[    2.877046] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[    2.877111] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    2.877180] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
[    2.877264] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input8
[    2.877306] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[    2.877334] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.879423] vga16fb: initializing
[    2.879427] vga16fb: mapped to 0xc00a0000
[    2.879432] vga16fb: not registering due to another framebuffer present
[    2.985173] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[334fc00025e97070]
[    3.128426] Console: switching to colour frame buffer device 160x50
[    4.077659] xor: automatically using best checksumming function: pIII_sse
[    4.095999]    pIII_sse  :  6835.000 MB/sec
[    4.096001] xor: using function: pIII_sse (6835.000 MB/sec)
[    4.098969] device-mapper: dm-raid45: initialized v0.2594b
[    4.264351] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   13.872065] udev: starting version 151
[   13.997635] Adding 6010872k swap on /dev/sda5.  Priority:-1 extents:1 across:6010872k 
[   14.020071] Linux video capture interface: v2.00
[   14.079224] lp: driver loaded but no devices found
[   14.107343] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[   14.108524] lib80211: common routines for IEEE802.11 drivers
[   14.108528] lib80211_crypt: registered algorithm 'NULL'
[   14.122037] wl: module license 'MIXED/Proprietary' taints kernel.
[   14.122043] Disabling lock debugging due to kernel taint
[   14.164249] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[   14.165815] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input9
[   14.165885] usbcore: registered new interface driver uvcvideo
[   14.165888] USB Video Class driver (v0.1.0)
[   14.252580] wl 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   14.252595] wl 0000:0b:00.0: setting latency timer to 64
[   14.255002] sdhci: Secure Digital Host Controller Interface driver
[   14.255005] sdhci: Copyright(c) Pierre Ossman
[   14.256522] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22)
[   14.256986]   alloc irq_desc for 18 on node -1
[   14.256989]   alloc kstat_irqs on node -1
[   14.257131] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[   14.267459] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   14.270986] Registered led device: mmc0::
[   14.272024] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA
[   14.293500] input: Dell WMI hotkeys as /devices/virtual/input/input10
[   14.380098] lib80211_crypt: registered algorithm 'TKIP'
[   14.380319] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36 
[   14.527928] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   14.527976] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.692956] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[   14.720509] sky2 eth0: enabling interface
[   14.722621] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.726352] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input12
[   14.751086] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input13
[   14.971537] HDMI already defined
[   15.967351] ppdev: user-space parallel port driver
[   16.084087] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x20171704
[   16.116192] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   16.116298] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   16.116368] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   25.060055] eth1: no IPv6 routers present
[  290.860453] VFS: busy inodes on changed media or resized disk sr0
[  290.987439] VFS: busy inodes on changed media or resized disk sr0
[  291.326532] VFS: busy inodes on changed media or resized disk sr0
[  291.361418] VFS: busy inodes on changed media or resized disk sr0
[  291.420472] VFS: busy inodes on changed media or resized disk sr0
[  291.432276] VFS: busy inodes on changed media or resized disk sr0
[  333.537790] mmc0: new SD card at address 8fe4
[  333.574314] mmcblk0: mmc0:8fe4 SD02G 1.84 GiB 
[  333.574447]  mmcblk0: p1
[ 1651.194412] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 1651.194872] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1661.432017] eth0: no IPv6 routers present
[ 1720.545667] sky2 eth0: Link is down.
[ 1750.667011] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both

**figarokj** · 08-19-2010

grep firmware was clear when i typed this

and uname -r

Code:

2.6.32-21-generic

**figarokj** · 08-19-2010

no clue what to do anymore; and very new to linux

Thread Tools

Display

dell 1525 to linux wireless, think the same problem

Posting Permissions