[SOLVED] Need help with DWL-G630

**TraceII** · 10-23-2010

I need some help setting up my D-Link DWL-G630 with my laptop running Puppy Arcade 9. I believe the chipset is Marvell W8300. Here is the wireless_setup.txt file

Code:

============ lspci ============

============ lsusb ============

============ lsmod ============
Module                  Size  Used by
ns558                   3584  0 
analog                 10784  0 
gameport               11016  3 ns558,analog
joydev                 10432  0 
wacom                  22792  0 
snd_pcm_oss            37408  0 
snd_seq_dummy           3076  0 
snd_seq_oss            29184  0 
snd_seq_midi_event      5120  1 snd_seq_oss
snd_seq                40528  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          6412  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_mixer_oss          14848  1 snd_pcm_oss
iptable_mangle          2688  0 
iptable_nat             6408  0 
nf_nat                 16016  1 iptable_nat
ipt_REJECT              3712  1 
nf_conntrack_ftp        7968  0 
nf_conntrack_irc        5656  0 
iptable_filter          2816  1 
xt_state                2048  4 
nf_conntrack_ipv4      15112  7 iptable_nat,nf_nat
nf_conntrack           46116  6 iptable_nat,nf_nat,nf_conntrack_ftp,nf_conntrack_irc,xt_state,nf_conntrack_ipv4
ip_tables              11920  3 iptable_mangle,iptable_nat,iptable_filter
fan                     4740  0 
martian_dev            21268  0 
serio_raw               5892  0 
e100                   29708  0 
mii                     4224  1 e100
snd_maestro3           21156  0 
snd_ac97_codec         79648  1 snd_maestro3
ac97_bus                1536  1 snd_ac97_codec
snd_pcm                59400  3 snd_pcm_oss,snd_maestro3,snd_ac97_codec
uhci_hcd               23820  0 
snd_timer              18436  2 snd_seq,snd_pcm
snd_page_alloc          8712  1 snd_pcm
snd                    41380  9 snd_pcm_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_maestro3,snd_ac97_codec,snd_pcm,snd_timer
pcspkr                  2432  0 
soundcore               5600  1 snd
i2c_piix4               7692  0 
evdev                  10752  0 
usbcore               136560  3 wacom,uhci_hcd
i2c_core               18576  1 i2c_piix4
yenta_socket           26252  3 
rsrc_nonstatic         12928  1 yenta_socket
squashfs               46856  0 
video                  16016  0 
unionfs                73572  0 
output                  2944  1 video
fuse                   48284  0 
nls_iso8859_1           4096  0 
nls_cp437               5760  0 
intel_agp              22332  1 
agpgart                26288  1 intel_agp
button                  6928  0 
battery                11012  0 
thermal                15644  0 
ac                      5124  0 
processor              28208  2 thermal

============ dmesg-firmware ============

============ kernel version ============
2.6.25.16

============ ifconfig ============
eth0      Link encap:Ethernet  HWaddr 00:20:E0:68:CC:9F  
          inet addr:192.168.1.118  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2670 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2092 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:2666784 (2.5 MiB)  TX bytes:381605 (372.6 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


============ iwconfig ============
============ lspci ============

============ lsusb ============

============ lsmod ============
Module                  Size  Used by
ns558                   3584  0 
analog                 10784  0 
gameport               11016  3 ns558,analog
joydev                 10432  0 
wacom                  22792  0 
snd_pcm_oss            37408  0 
snd_seq_dummy           3076  0 
snd_seq_oss            29184  0 
snd_seq_midi_event      5120  1 snd_seq_oss
snd_seq                40528  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          6412  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_mixer_oss          14848  1 snd_pcm_oss
iptable_mangle          2688  0 
iptable_nat             6408  0 
nf_nat                 16016  1 iptable_nat
ipt_REJECT              3712  1 
nf_conntrack_ftp        7968  0 
nf_conntrack_irc        5656  0 
iptable_filter          2816  1 
xt_state                2048  4 
nf_conntrack_ipv4      15112  7 iptable_nat,nf_nat
nf_conntrack           46116  6 iptable_nat,nf_nat,nf_conntrack_ftp,nf_conntrack_irc,xt_state,nf_conntrack_ipv4
ip_tables              11920  3 iptable_mangle,iptable_nat,iptable_filter
fan                     4740  0 
martian_dev            21268  0 
serio_raw               5892  0 
e100                   29708  0 
mii                     4224  1 e100
snd_maestro3           21156  0 
snd_ac97_codec         79648  1 snd_maestro3
ac97_bus                1536  1 snd_ac97_codec
snd_pcm                59400  3 snd_pcm_oss,snd_maestro3,snd_ac97_codec
uhci_hcd               23820  0 
snd_timer              18436  2 snd_seq,snd_pcm
snd_page_alloc          8712  1 snd_pcm
snd                    41380  9 snd_pcm_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_maestro3,snd_ac97_codec,snd_pcm,snd_timer
pcspkr                  2432  0 
soundcore               5600  1 snd
i2c_piix4               7692  0 
evdev                  10752  0 
usbcore               136560  3 wacom,uhci_hcd
i2c_core               18576  1 i2c_piix4
yenta_socket           26252  3 
rsrc_nonstatic         12928  1 yenta_socket
squashfs               46856  0 
video                  16016  0 
unionfs                73572  0 
output                  2944  1 video
fuse                   48284  0 
nls_iso8859_1           4096  0 
nls_cp437               5760  0 
intel_agp              22332  1 
agpgart                26288  1 intel_agp
button                  6928  0 
battery                11012  0 
thermal                15644  0 
ac                      5124  0 
processor              28208  2 thermal

============ dmesg-firmware ============

============ kernel version ============
2.6.25.16

============ ifconfig ============
eth0      Link encap:Ethernet  HWaddr 00:20:E0:68:CC:9F  
          inet addr:192.168.1.118  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3103 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2403 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3178815 (3.0 MiB)  TX bytes:434818 (424.6 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


============ iwconfig ============
============ lspci ============

============ lsusb ============

============ lsmod ============
Module                  Size  Used by
ns558                   3584  0 
analog                 10784  0 
gameport               11016  3 ns558,analog
joydev                 10432  0 
wacom                  22792  0 
snd_pcm_oss            37408  0 
snd_seq_dummy           3076  0 
snd_seq_oss            29184  0 
snd_seq_midi_event      5120  1 snd_seq_oss
snd_seq                40528  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          6412  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_mixer_oss          14848  1 snd_pcm_oss
iptable_mangle          2688  0 
iptable_nat             6408  0 
nf_nat                 16016  1 iptable_nat
ipt_REJECT              3712  1 
nf_conntrack_ftp        7968  0 
nf_conntrack_irc        5656  0 
iptable_filter          2816  1 
xt_state                2048  4 
nf_conntrack_ipv4      15112  7 iptable_nat,nf_nat
nf_conntrack           46116  6 iptable_nat,nf_nat,nf_conntrack_ftp,nf_conntrack_irc,xt_state,nf_conntrack_ipv4
ip_tables              11920  3 iptable_mangle,iptable_nat,iptable_filter
fan                     4740  0 
martian_dev            21268  0 
serio_raw               5892  0 
e100                   29708  0 
mii                     4224  1 e100
snd_maestro3           21156  0 
snd_ac97_codec         79648  1 snd_maestro3
ac97_bus                1536  1 snd_ac97_codec
snd_pcm                59400  3 snd_pcm_oss,snd_maestro3,snd_ac97_codec
uhci_hcd               23820  0 
snd_timer              18436  2 snd_seq,snd_pcm
snd_page_alloc          8712  1 snd_pcm
snd                    41380  9 snd_pcm_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_maestro3,snd_ac97_codec,snd_pcm,snd_timer
pcspkr                  2432  0 
soundcore               5600  1 snd
i2c_piix4               7692  0 
evdev                  10752  0 
usbcore               136560  3 wacom,uhci_hcd
i2c_core               18576  1 i2c_piix4
yenta_socket           26252  3 
rsrc_nonstatic         12928  1 yenta_socket
squashfs               46856  0 
video                  16016  0 
unionfs                73572  0 
output                  2944  1 video
fuse                   48284  0 
nls_iso8859_1           4096  0 
nls_cp437               5760  0 
intel_agp              22332  1 
agpgart                26288  1 intel_agp
button                  6928  0 
battery                11012  0 
thermal                15644  0 
ac                      5124  0 
processor              28208  2 thermal

============ dmesg-firmware ============

============ kernel version ============
2.6.25.16

============ ifconfig ============
eth0      Link encap:Ethernet  HWaddr 00:20:E0:68:CC:9F  
          inet addr:192.168.1.118  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3173 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2482 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3192277 (3.0 MiB)  TX bytes:458323 (447.5 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


============ iwconfig ============

**MikeTbob** · 10-23-2010

Hello and Welcome.
That script doesn't seem to be working correctly for you. Can you post the output manually? Use root or sudo if you need to.

Code:

lspci

Code:

lsusb

**TraceII** · 10-23-2010

Does this help?

Code:

# lspci
00:00.0 Class 0600: 8086:7190 (rev 03)
00:01.0 Class 0604: 8086:7191 (rev 03)
00:03.0 Class 0607: 104c:ac51
00:03.1 Class 0607: 104c:ac51
00:07.0 Class 0680: 8086:7110 (rev 02)
00:07.1 Class 0101: 8086:7111 (rev 01)
00:07.2 Class 0c03: 8086:7112 (rev 01)
00:07.3 Class 0680: 8086:7113 (rev 03)
00:08.0 Class 0401: 125d:1998 (rev 10)
00:10.0 Class 0604: 1668:0100 (rev 11)
01:00.0 Class 0300: 1002:4c46 (rev 02)
08:04.0 Class 0200: 8086:1229 (rev 08)
08:08.0 Class 0780: 11c1:0448 (rev 01)
0d:00.0 Class 0200: 11ab:1fa6 (rev 07)
# lsusb
bash: lsusb: command not found

**MikeTbob** · 10-23-2010

Sorta, but not really.
Try

Code:

lspci -vv

**TraceII** · 10-23-2010

Code:

# lspci -vv
00:00.0 Class 0600: 8086:7190 (rev 03)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 32
        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 1.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

00:01.0 Class 0604: 8086:7191 (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fd000000-feffffff
        Prefetchable memory behind bridge: f4000000-f7ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+

00:03.0 Class 0607: 104c:ac51
        Subsystem: 1028:00b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, cache line size 20
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 30000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=09, subordinate=0c, sec-latency=176
        Memory window 0: 20000000-23fff000 (prefetchable)
        Memory window 1: 24000000-27fff000
        I/O window 0: 00001000-000010ff
        I/O window 1: 00001400-000014ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

00:03.1 Class 0607: 104c:ac51
        Subsystem: 1028:00b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, cache line size 20
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 30001000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=0d, subordinate=10, sec-latency=176
        Memory window 0: 28000000-2bfff000 (prefetchable)
        Memory window 1: 2c000000-2ffff000
        I/O window 0: 00001800-000018ff
        I/O window 1: 00001c00-00001cff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
        16-bit legacy interface ports at 0001

00:07.0 Class 0680: 8086:7110 (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:07.1 Class 0101: 8086:7111 (rev 01) (prog-if 80 [Master])
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
        Region 4: I/O ports at 0860 [size=16]

00:07.2 Class 0c03: 8086:7112 (rev 01)
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin D routed to IRQ 11
        Region 4: I/O ports at cce0 [size=32]

00:07.3 Class 0680: 8086:7113 (rev 03)
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin ? routed to IRQ 9

00:08.0 Class 0401: 125d:1998 (rev 10)
        Subsystem: 1028:00b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 6000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at c800 [size=256]
        Region 1: Memory at f9ffe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 Class 0604: 1668:0100 (rev 11)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, cache line size 08
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fb000000-fcffffff
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [90] #06 [0000]

01:00.0 Class 0300: 1002:4c46 (rev 02)
        Subsystem: 1028:00b0
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min), cache line size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
        Region 1: I/O ports at ec00 [size=256]
        Region 2: Memory at fdffc000 (32-bit, non-prefetchable) [size=16K]
        Expansion ROM at fd000000 [disabled] [size=128K]
        Capabilities: [50] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
        Capabilities: [5c] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

08:04.0 Class 0200: 8086:1229 (rev 08)
        Subsystem: 1668:1100
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min, 14000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at dcc0 [size=64]
        Region 2: Memory at fbe00000 (32-bit, non-prefetchable) [size=1M]
        Expansion ROM at fc000000 [disabled] [size=1M]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

08:08.0 Class 0780: 11c1:0448 (rev 01)
        Subsystem: 1668:2400
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (63000ns min, 3500ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fbffec00 (32-bit, non-prefetchable) [size=256]
        Region 1: I/O ports at dcb8 [size=8]
        Region 2: I/O ports at d800 [size=256]
        Capabilities: [f8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0d:00.0 Class 0200: 11ab:1fa6 (rev 07)
        Subsystem: 1186:3b08
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 2c000000 (32-bit, non-prefetchable) [disabled] [size=64K]
        Region 1: Memory at 2c010000 (32-bit, non-prefetchable) [disabled] [size=64K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

**MikeTbob** · 10-24-2010

Man, puppy uses some weird stuff....I'm not getting the info I want. Is this a USB or pci card?

**TraceII** · 10-24-2010

I think it's PCI Express. It plugs in to the side of my laptop and has a connector that resembles a compact flash card.

**MikeTbob** · 10-24-2010

Was it plugged in when you issued the commands? I believe you are referring to a PCMCIA card. Looks like one of these?
PC Card - Wikipedia, the free encyclopedia
Do you have any other LiveCD's or distros laying around that you could try these commands on? Your card is showing up in numerical code above and I don't know which one it is.

**rokytnji** · 10-24-2010

For a pcmcia cards you can get information on the chip by opening the console and typing "cardctl ident " at the command prompt, then press enter. This will help identify the correct driver to load in Puppy's connection wizard. e.g.

Code:

 # cardctl ident
Socket 0:
  no product info available
Socket 1:
  product info: "Realtek", "Rtl8139"
  manfid: 0x0000, 0x024c
  function: 6 (network)

Pay attention to the line which has "manfid: 0x0000, 0x024c' on it as you can use this string to search the net find the chip should the line with the product info be incorrect. My pcmcia card identified the chip as "Rtl8139" which was not actually correct. I had help from Tempestuous who pointed out this discrepancy and identified the correct driver to use. I needed to use the "r8180" driver listed in the wireless wizard to get a working connection.

From Puppy Linux Discussion Forum :: View topic - Identifying the chipset in your wireless card.

Might help out in Puppy, TBob, maybe. Since I run Puppy partition along with AntiX. I go to menu>system>pupscan interface>pci(or usb)interfaces to get the chipset manufacturer and driver the card needs. Hope that helps.

Edit: also below is pciids for the code puppy uses.

http://pciids.sourceforge.net/pci.ids

took a while. but

0d:00.0 Class 0200: 11ab:1fa6 (rev 07)

looks like

11ab
Marvell Technology Group Ltd.
0146 GT-64010/64010A System Controller
0f53 88E6318 Link Street network controller
11ab MV88SE614x SATA II PCI-E controller
138f W8300 802.11 Adapter (rev 07)
1fa6 Marvell W8300 802.11 Adapter
1186 3b08 AirPlus G DWL-G630 Wireless Cardbus Adapter (rev.A1)
1fa7 88W8310 and 88W8000G [Libertas] 802.11g client chipset

from the sourceforge link which I have a hard time figuring out to use. For me, menu>system>pupscan interface is a lot easier.

2nd edit: Below is the Windows driver in case he needs it in zip format. In case ndiswrapper is the only route.

P.S. For anyone needing a driver for D-Link DWL 630 VERSION A use this link:
D-Link DWL 630 Driver Ubuntu

This is for pciid: 11ab:1fa6 and also work for the dwlg510 which is the pci bus version of the PCMCIA DWL 630. The only working driver for me was the Windows 98 Driver. That’s on a Dell Latitude CPX-H.

From D-link Dwl 630 - BleepingComputer.com

The Windows Driver

I downloaded it. Extracted it and looked inside. It has the folders for Win ME, 98,2k, and XP.

3rd Edit.

Last Edit: Good Night

**MikeTbob** · 10-24-2010

Excellent advice Roky, now we'll just wait for OP to respond.

Thread Tools

Display

[SOLVED] Need help with DWL-G630

Posting Permissions