Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
Hello all! First post here I've visited many times in the past, but finally registered! I own a Samsung 9 Series laptop (np900x3a) and, only after the most recent Pardus ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9

    Help - Pardus Linux Wireless Connection


    Hello all! First post here I've visited many times in the past, but finally registered!

    I own a Samsung 9 Series laptop (np900x3a) and, only after the most recent Pardus update, was able to install Pardus 2011. Everything is going great, but one big problem: wireless doesn't work. In the knetworkmanager connection settings, the wireless tab is grayed out. I somehow got it to un-gray once, but it still wouldn't connect to my network. I did a fresh install to undo the random things I did to try to make it work.

    lspci -knn yields:

    00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel driver in use: agpgart-intel
    00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel driver in use: i915
    Kernel modules: i915
    00:16.0 Communication controller [0780]: Intel Corporation 6 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    00:1a.0 USB Controller [0c03]: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device [0403]: Intel Corporation 6 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4)
    Kernel modules: shpchp
    00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4)
    Kernel modules: shpchp
    00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4)
    Kernel modules: shpchp
    00:1d.0 USB Controller [0c03]: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel driver in use: ehci_hcd
    00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel modules: iTCO_wdt
    00:1f.2 SATA controller [0106]: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel driver in use: ahci
    Kernel modules: ahci
    00:1f.3 SMBus [0c05]: Intel Corporation 6 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel modules: i2c-i801
    01:00.0 Network controller [0280]: Broadcom Corporation BCM43225 802.11b/g/n [14e4:4357] (rev 01)
    Subsystem: Wistron NeWeb Corp. Device [185f:04db]
    02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel driver in use: r8169
    Kernel modules: r8169
    03:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)
    Subsystem: Samsung Electronics Co Ltd Device [144d:c098]
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci-hcd
    Could somebody please help me resolve this issue? Pardus is awesome, and I'd really like to use it as my main distro, but I can't without internet...

    Thanks!

  2. #2
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.37.6 (pardus@buildfarm) (gcc version 4.5.2 (Pardus Linux) ) #1 SMP Wed Mar 30 15:28:53 EEST 2011
    [ 0.000000] Command line: root=/dev/mapper/VolGroup-lv_root resume=/dev/mapper/VolGroup-lv_swap splash quiet
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
    [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000aaa75000 (usable)
    [ 0.000000] BIOS-e820: 00000000aaa75000 - 00000000aaa77000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aaa77000 - 00000000aaa78000 (usable)
    [ 0.000000] BIOS-e820: 00000000aaa78000 - 00000000aaa7c000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aaa7c000 - 00000000aad0f000 (usable)
    [ 0.000000] BIOS-e820: 00000000aad0f000 - 00000000aae76000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aae76000 - 00000000aae96000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000aae96000 - 00000000aaf1f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aaf1f000 - 00000000aaf9f000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000aaf9f000 - 00000000aafff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000aafff000 - 00000000ab000000 (usable)
    [ 0.000000] BIOS-e820: 00000000ab000000 - 00000000afa00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000024fe00000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 90X3A/90X3A, BIOS 03HL 02/10/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x24fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0AC000000 mask FFC000000 uncachable
    [ 0.000000] 5 base 0AB000000 mask FFF000000 uncachable
    [ 0.000000] 6 base 100000000 mask F00000000 write-back
    [ 0.000000] 7 base 200000000 mask FC0000000 write-back
    [ 0.000000] 8 base 240000000 mask FE0000000 write-back
    [ 0.000000] 9 base 250000000 mask FF0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xab000 max_arch_pfn = 0x400000000
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000ab000000
    [ 0.000000] 0000000000 - 00ab000000 page 2M
    [ 0.000000] kernel direct mapping tables up to ab000000 @ 1fffc000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000024fe00000
    [ 0.000000] 0100000000 - 024fe00000 page 2M
    [ 0.000000] kernel direct mapping tables up to 24fe00000 @ aad04000-aad0f000
    [ 0.000000] RAMDISK: 37708000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 SECCSD)
    [ 0.000000] ACPI: XSDT 00000000aaffe120 00084 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
    [ 0.000000] ACPI: FACP 00000000aafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000aaff2000 0827C (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000aaf3e000 00040
    [ 0.000000] ACPI: SLIC 00000000aaffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
    [ 0.000000] ACPI: SSDT 00000000aaffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
    [ 0.000000] ACPI: ASF! 00000000aaff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: HPET 00000000aafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000aafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000aafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: SSDT 00000000aafeb000 00780 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000aafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: UEFI 00000000aafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000aafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000aafe7000 00256 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000024fe00000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000024fe00000
    [ 0.000000] NODE_DATA [000000024fdec000 - 000000024fdfffff]
    [ 0.000000] [ffffea0000000000-ffffea00081fffff] PMD -> [ffff880247c00000-ffff88024edfffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0024fe00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[6] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009d
    [ 0.000000] 0: 0x00000100 -> 0x000aaa75
    [ 0.000000] 0: 0x000aaa77 -> 0x000aaa78
    [ 0.000000] 0: 0x000aaa7c -> 0x000aad0f
    [ 0.000000] 0: 0x000aafff -> 0x000ab000
    [ 0.000000] 0: 0x00100000 -> 0x0024fe00
    [ 0.000000] On node 0 totalpages: 2075287
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3919 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 681282 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18809 pages used for memmap
    [ 0.000000] Normal zone: 1356935 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000aaa75000 - 00000000aaa77000
    [ 0.000000] PM: Registered nosave memory: 00000000aaa78000 - 00000000aaa7c000
    [ 0.000000] PM: Registered nosave memory: 00000000aad0f000 - 00000000aae76000
    [ 0.000000] PM: Registered nosave memory: 00000000aae76000 - 00000000aae96000
    [ 0.000000] PM: Registered nosave memory: 00000000aae96000 - 00000000aaf1f000
    [ 0.000000] PM: Registered nosave memory: 00000000aaf1f000 - 00000000aaf9f000
    [ 0.000000] PM: Registered nosave memory: 00000000aaf9f000 - 00000000aafff000
    [ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
    [ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
    [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
    [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:48600000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800aa800000 s83648 r8192 d22848 u262144
    [ 0.000000] pcpu-alloc: s83648 r8192 d22848 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042136
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/mapper/VolGroup-lv_root resume=/dev/mapper/VolGroup-lv_swap splash quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8094716k/9697280k available (4661k kernel code, 1396132k absent, 206432k reserved, 6726k data, 720k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] NR_IRQS:33024 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 83886080 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.001000] Detected 1396.787 MHz processor.
    [ 0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.57 BogoMIPS (lpj=1396787)
    [ 0.000017] pid_max: default: 32768 minimum: 301
    [ 0.000055] Security Framework initialized
    [ 0.000061] AppArmor: AppArmor disabled by boot time parameter
    [ 0.001522] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.004663] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.005871] Mount-cache hash table entries: 256
    [ 0.006069] Initializing cgroup subsys ns
    [ 0.006073] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.006077] Initializing cgroup subsys cpuacct
    [ 0.006085] Initializing cgroup subsys memory
    [ 0.006108] Initializing cgroup subsys devices
    [ 0.006111] Initializing cgroup subsys freezer
    [ 0.006114] Initializing cgroup subsys net_cls
    [ 0.006118] Initializing cgroup subsys blkio
    [ 0.006173] CPU: Physical Processor ID: 0
    [ 0.006175] CPU: Processor Core ID: 0
    [ 0.006183] mce: CPU supports 7 MCE banks
    [ 0.006201] CPU0: Thermal monitoring enabled (TM1)
    [ 0.006212] using mwait in idle threads.
    [ 0.006215] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.006224] ... version: 3
    [ 0.006226] ... bit width: 48
    [ 0.006228] ... generic registers: 4
    [ 0.006230] ... value mask: 0000ffffffffffff
    [ 0.006233] ... max period: 000000007fffffff
    [ 0.006235] ... fixed-purpose events: 3
    [ 0.006237] ... event mask: 000000070000000f
    [ 0.007054] ACPI: Core revision 20101013
    [ 0.040989] Setting APIC routing to flat
    [ 0.041358] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.051361] CPU0: Intel(R) Core(TM) i5-2537M CPU @ 1.40GHz stepping 07
    [ 0.152757] Booting Node 0, Processors #1 #2 #3
    [ 0.425508] Brought up 4 CPUs
    [ 0.425513] Total of 4 processors activated (11173.51 BogoMIPS).
    [ 0.428565] devtmpfs: initialized
    [ 0.436439] atomic64 test passed for x86-64 platform with CX8 and with SSE
    [ 0.436444] regulator: core version 0.5
    [ 0.436512] regulator: dummy:
    [ 0.436576] NET: Registered protocol family 16
    [ 0.436788] ACPI: bus type pci registered
    [ 0.436930] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.436935] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.449737] PCI: Using configuration type 1 for base access
    [ 0.451781] bio: create slab <bio-0> at 0
    [ 0.455106] ACPI: EC: Look up EC in DSDT
    [ 0.458252] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.470540] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.476455] ACPI: SSDT 00000000aaf10718 00670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.477295] ACPI: Dynamic OEM Table Load:
    [ 0.477299] ACPI: SSDT (null) 00670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.480217] ACPI: SSDT 00000000aaf11a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.481163] ACPI: Dynamic OEM Table Load:
    [ 0.481167] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.484723] ACPI: SSDT 00000000aaf0fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.485547] ACPI: Dynamic OEM Table Load:
    [ 0.485553] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.502796] ACPI: Interpreter enabled
    [ 0.502802] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.502849] ACPI: Using IOAPIC for interrupt routing
    [ 0.511483] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
    [ 0.525324] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.525394] ACPI: Power Resource [FN00] (off)
    [ 0.525430] ACPI: Power Resource [FN01] (off)
    [ 0.525459] ACPI: Power Resource [FN02] (off)
    [ 0.525488] ACPI: Power Resource [FN03] (off)
    [ 0.525517] ACPI: Power Resource [FN04] (off)
    [ 0.525879] ACPI: No dock devices found.
    [ 0.525881] HEST: Table not found.
    [ 0.525886] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.527328] \_SB_.PCI0:_OSC invalid UUID
    [ 0.527330] _OSC request data:1 8 1f
    [ 0.527337] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.529279] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.529283] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.529287] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.529292] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
    [ 0.529296] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
    [ 0.529315] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
    [ 0.529368] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
    [ 0.529386] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 0.529396] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 0.529409] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
    [ 0.529502] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
    [ 0.529543] pci 0000:00:16.0: reg 10: [mem 0xc0705000-0xc070500f 64bit]
    [ 0.529651] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.529658] pci 0000:00:16.0: PME# disabled
    [ 0.529718] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
    [ 0.529754] pci 0000:00:1a.0: reg 10: [mem 0xc070a000-0xc070a3ff]
    [ 0.529882] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.529888] pci 0000:00:1a.0: PME# disabled
    [ 0.529931] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
    [ 0.529962] pci 0000:00:1b.0: reg 10: [mem 0xc0700000-0xc0703fff 64bit]
    [ 0.530074] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.530080] pci 0000:00:1b.0: PME# disabled
    [ 0.530116] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
    [ 0.530232] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.530239] pci 0000:00:1c.0: PME# disabled
    [ 0.530282] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
    [ 0.530398] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.530408] pci 0000:00:1c.3: PME# disabled
    [ 0.530447] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
    [ 0.530564] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.530571] pci 0000:00:1c.4: PME# disabled
    [ 0.530624] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
    [ 0.530660] pci 0000:00:1d.0: reg 10: [mem 0xc0709000-0xc07093ff]
    [ 0.530788] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.530795] pci 0000:00:1d.0: PME# disabled
    [ 0.530834] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
    [ 0.531023] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
    [ 0.531062] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
    [ 0.531078] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
    [ 0.531094] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
    [ 0.531111] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
    [ 0.531127] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
    [ 0.531144] pci 0000:00:1f.2: reg 24: [mem 0xc0708000-0xc07087ff]
    [ 0.531215] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.531222] pci 0000:00:1f.2: PME# disabled
    [ 0.531255] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
    [ 0.531285] pci 0000:00:1f.3: reg 10: [mem 0xc0704000-0xc07040ff 64bit]
    [ 0.531329] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    [ 0.531501] pci 0000:01:00.0: [14e4:4357] type 0 class 0x000280
    [ 0.531542] pci 0000:01:00.0: reg 10: [mem 0xc0600000-0xc0603fff 64bit]
    [ 0.531705] pci 0000:01:00.0: supports D1 D2
    [ 0.531708] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.531716] pci 0000:01:00.0: PME# disabled
    [ 0.533440] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.533451] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.533461] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
    [ 0.533477] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.533655] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.533731] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.533866] pci 0000:02:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
    [ 0.533950] pci 0000:02:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
    [ 0.534189] pci 0000:02:00.0: supports D1 D2
    [ 0.534192] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.534209] pci 0000:02:00.0: PME# disabled
    [ 0.535455] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.535465] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.535475] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.535498] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.535635] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
    [ 0.535693] pci 0000:03:00.0: reg 10: [mem 0xc0500000-0xc0501fff 64bit]
    [ 0.535928] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.535938] pci 0000:03:00.0: PME# disabled
    [ 0.537438] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.537448] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.537458] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
    [ 0.537474] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.537517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.537851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.537949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.538041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.538426] \_SB_.PCI0:_OSC invalid UUID
    [ 0.538428] _OSC request data:1 1f 1f
    [ 0.538434] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.538675] \_SB_.PCI0:_OSC invalid UUID
    [ 0.538677] _OSC request data:1 0 1d
    [ 0.545703] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.545826] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.545949] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.546069] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.546193] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 10 11 12 14 15)
    [ 0.546311] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.546440] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.546562] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
    [ 0.546775] SCSI subsystem initialized
    [ 0.546853] libata version 3.00 loaded.
    [ 0.546944] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
    [ 0.546956] vgaarb: loaded
    [ 0.547002] usbcore: registered new interface driver usbfs
    [ 0.547026] usbcore: registered new interface driver hub
    [ 0.547068] usbcore: registered new device driver usb
    [ 0.547220] PCI: Using ACPI for IRQ routing
    [ 0.547223] PCI: pci_cache_line_size set to 64 bytes
    [ 0.547326] reserve RAM buffer: 000000000009d800 - 000000000009ffff
    [ 0.547330] reserve RAM buffer: 00000000aaa75000 - 00000000abffffff
    [ 0.547337] reserve RAM buffer: 00000000aaa78000 - 00000000abffffff
    [ 0.547343] reserve RAM buffer: 00000000aad0f000 - 00000000abffffff
    [ 0.547348] reserve RAM buffer: 00000000ab000000 - 00000000abffffff
    [ 0.547351] reserve RAM buffer: 000000024fe00000 - 000000024fffffff
    [ 0.547509] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.547519] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.549549] Switching to clocksource tsc
    [ 0.551824] pnp: PnP ACPI init
    [ 0.551847] ACPI: bus type pnp registered
    [ 0.552844] pnp 00:00: [bus 00-3e]
    [ 0.552849] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.552852] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.552855] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.552858] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.552862] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.552865] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.552868] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.552871] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.552874] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.552877] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.552880] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.552883] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.552886] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.552889] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.552892] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.552895] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.552898] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.552902] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
    [ 0.552908] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.553006] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.554527] pnp 00:01: [io 0x0000-0x001f]
    [ 0.554530] pnp 00:01: [io 0x0081-0x0091]
    [ 0.554535] pnp 00:01: [io 0x0093-0x009f]
    [ 0.554539] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.554543] pnp 00:01: [dma 4]
    [ 0.554592] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.554609] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 0.554650] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.554819] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.554866] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.554886] pnp 00:04: [io 0x00f0]
    [ 0.554898] pnp 00:04: [irq 13]
    [ 0.554939] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.554961] pnp 00:05: [io 0x002e-0x002f]
    [ 0.554963] pnp 00:05: [io 0x004e-0x004f]
    [ 0.554966] pnp 00:05: [io 0x0061]
    [ 0.554968] pnp 00:05: [io 0x0063]
    [ 0.554971] pnp 00:05: [io 0x0065]
    [ 0.554973] pnp 00:05: [io 0x0067]
    [ 0.554975] pnp 00:05: [io 0x0070]
    [ 0.554978] pnp 00:05: [io 0x0080]
    [ 0.554980] pnp 00:05: [io 0x0092]
    [ 0.554983] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.554985] pnp 00:05: [io 0x0680-0x069f]
    [ 0.554988] pnp 00:05: [io 0x1000-0x100f]
    [ 0.554991] pnp 00:05: [io 0x5000-0x5003]
    [ 0.554993] pnp 00:05: [io 0xffff]
    [ 0.554996] pnp 00:05: [io 0x0400-0x0453]
    [ 0.554998] pnp 00:05: [io 0x0458-0x047f]
    [ 0.555001] pnp 00:05: [io 0x0500-0x057f]
    [ 0.555004] pnp 00:05: [io 0x0a00-0x0a0f]
    [ 0.555006] pnp 00:05: [io 0x164e-0x164f]
    [ 0.555009] pnp 00:05: [io 0x5000-0x500f]
    [ 0.555079] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.555095] pnp 00:06: [io 0x0070-0x0077]
    [ 0.555103] pnp 00:06: [irq 8]
    [ 0.555144] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.555212] pnp 00:07: [io 0x0454-0x0457]
    [ 0.555271] pnp 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.555303] pnp 00:08: [io 0x0060]
    [ 0.555306] pnp 00:08: [io 0x0064]
    [ 0.555313] pnp 00:08: [irq 1]
    [ 0.555357] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.555388] pnp 00:09: [irq 12]
    [ 0.555440] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.555776] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.555779] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
    [ 0.555782] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
    [ 0.555785] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
    [ 0.555788] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
    [ 0.555796] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 0.555798] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
    [ 0.555801] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 0.555804] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 0.555807] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 0.555810] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.555879] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.557508] pnp 00:0b: can't evaluate _CRS: 12311
    [ 0.557657] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.557747] pnp: PnP ACPI: found 12 devices
    [ 0.557749] ACPI: ACPI bus type pnp unregistered
    [ 0.557765] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.557770] system 00:05: [io 0x1000-0x100f] has been reserved
    [ 0.557773] system 00:05: [io 0x5000-0x5003] has been reserved
    [ 0.557777] system 00:05: [io 0xffff] has been reserved
    [ 0.557781] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 0.557785] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.557788] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.557792] system 00:05: [io 0x0a00-0x0a0f] has been reserved
    [ 0.557796] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.557800] system 00:05: [io 0x5000-0x500f] could not be reserved
    [ 0.557808] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 0.557817] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.557821] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.557825] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.557828] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.557833] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.557836] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.557840] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.557844] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.557848] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.557853] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.565224] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.565227] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.565236] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
    [ 0.565243] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.565254] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.565259] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.565267] pci 0000:00:1c.3: bridge window [mem disabled]
    [ 0.565275] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.565286] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.565288] pci 0000:00:1c.4: bridge window [io disabled]
    [ 0.565297] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
    [ 0.565304] pci 0000:00:1c.4: bridge window [mem pref disabled]
    [ 0.565332] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.565339] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.565354] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 0.565361] pci 0000:00:1c.3: setting latency timer to 64
    [ 0.565371] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.565378] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.565384] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.565387] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.565391] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.565398] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
    [ 0.565401] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.565405] pci_bus 0000:01: resource 1 [mem 0xc0600000-0xc06fffff]
    [ 0.565408] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.565411] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.565415] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
    [ 0.565464] NET: Registered protocol family 2
    [ 0.565912] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.569307] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.571468] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.571664] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.571667] TCP reno registered
    [ 0.571697] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.571757] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.571987] NET: Registered protocol family 1
    [ 0.572009] pci 0000:00:02.0: Boot video device
    [ 0.572157] PCI: CLS 64 bytes, default 64
    [ 0.572216] Unpacking initramfs...
    [ 0.908378] Freeing initrd memory: 9120k freed
    [ 0.911122] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.911128] Placing 64MB software IO TLB between ffff8800a6800000 - ffff8800aa800000
    [ 0.911132] software IO TLB at phys 0xa6800000 - 0xaa800000
    [ 0.912252] audit: initializing netlink socket (disabled)
    [ 0.912266] type=2000 audit(1310705679.735:1): initialized
    [ 0.947355] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.950280] VFS: Disk quotas dquot_6.5.2
    [ 0.950372] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.951141] Registering unionfs 2.5.7 (for 2.6.37-rc1)
    [ 0.951367] fuse init (API version 7.15)
    [ 0.951770] aufs 2.1-37
    [ 0.951776] msgmni has been set to 15827
    [ 0.952267] alg: No test for stdrng (krng)
    [ 0.952406] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.952443] io scheduler noop registered
    [ 0.952445] io scheduler deadline registered
    [ 0.952524] io scheduler cfq registered (default)
    [ 0.952726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.952771] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.952932] intel_idle: MWAIT substates: 0x21120
    [ 0.952935] intel_idle: v0.4 model 0x2A
    [ 0.952937] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.956358] ACPI: AC Adapter [ADP1] (on-line)
    [ 0.956601] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
    [ 0.958394] ACPI: Lid Switch [LID0]
    [ 0.958526] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 0.958533] ACPI: Power Button [PWRB]
    [ 0.958620] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 0.958626] ACPI: Sleep Button [SLPB]
    [ 0.958705] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 0.958710] ACPI: Power Button [PWRF]
    [ 0.960467] ACPI: Fan [FAN0] (off)
    [ 0.960554] ACPI: Fan [FAN1] (off)
    [ 0.960633] ACPI: Fan [FAN2] (off)
    [ 0.960714] ACPI: Fan [FAN3] (off)
    [ 0.960792] ACPI: Fan [FAN4] (off)
    [ 0.961092] ACPI: acpi_idle yielding to intel_idle
    [ 0.971643] thermal LNXTHERM:00: registered as thermal_zone0
    [ 0.971648] ACPI: Thermal Zone [TZ00] (66 C)
    [ 0.972069] thermal LNXTHERM:01: registered as thermal_zone1
    [ 0.972072] ACPI: Thermal Zone [TZ01] (30 C)
    [ 0.972152] ERST: Table is not found!
    [ 0.972155] XENFS: not registering filesystem on non-xen platform
    [ 0.973660] Linux agpgart interface v0.103
    [ 0.973766] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
    [ 0.973900] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 0.975531] agpgart-intel 0000:00:00.0: detected 65536K stolen memory, trimming to 32768K
    [ 1.017556] ACPI: Battery Slot [BAT1] (battery present)
    [ 1.026352] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 1.026416] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 1.048556] loop: module loaded
    [ 1.048574] st: Version 20100829, fixed bufsize 32768, s/g segs 256
    [ 1.048759] Fixed MDIO Bus: probed
    [ 1.048793] console [netcon0] enabled
    [ 1.048795] netconsole: network logging started
    [ 1.048810] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.048835] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.048865] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.048871] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.048897] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.051409] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.055315] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.055345] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc070a000
    [ 1.064346] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.064392] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.064398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.064404] usb usb1: Product: EHCI Host Controller
    [ 1.064409] usb usb1: Manufacturer: Linux 2.6.37.6 ehci_hcd
    [ 1.064422] usb usb1: SerialNumber: 0000:00:1a.0
    [ 1.064572] hub 1-0:1.0: USB hub found
    [ 1.064579] hub 1-0:1.0: 2 ports detected
    [ 1.064679] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.064699] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.064704] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.064714] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.069400] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.073286] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.073306] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc0709000
    [ 1.082340] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.082377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.082383] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.082388] usb usb2: Product: EHCI Host Controller
    [ 1.082393] usb usb2: Manufacturer: Linux 2.6.37.6 ehci_hcd
    [ 1.082398] usb usb2: SerialNumber: 0000:00:1d.0
    [ 1.082557] hub 2-0:1.0: USB hub found
    [ 1.082563] hub 2-0:1.0: 2 ports detected
    [ 1.082665] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.082684] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.082834] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SPAD] at 0x60,0x64 irq 1,12
    [ 1.086540] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.086548] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.086691] mice: PS/2 mouse device common for all mice
    [ 1.090540] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.090574] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.090881] cpuidle: using governor ladder
    [ 1.091322] cpuidle: using governor menu
    [ 1.091940] usbcore: registered new interface driver usbhid
    [ 1.091944] usbhid: USB HID core driver
    [ 1.092628] NET: Registered protocol family 10
    [ 1.093389] lo: Disabled Privacy Extensions
    [ 1.093712] NET: Registered protocol family 17
    [ 1.093741] Registering the dns_resolver key type
    [ 1.119688] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [ 1.119868] registered taskstats version 1
    [ 1.120707] rtc_cmos 00:06: setting system clock to 2011-07-15 04:54:40 UTC (1310705680)
    [ 1.121043] Freeing unused kernel memory: 720k freed
    [ 1.121545] Write protecting the kernel read-only data: 10240k
    [ 1.122513] Freeing unused kernel memory: 1464k freed
    [ 1.124922] Freeing unused kernel memory: 1724k freed
    [ 1.129728] initramfs: Starting init on initramfs
    [ 1.149009] initramfs: Loading KMS driver
    [ 1.192714] [drm] Initialized drm 1.1.0 20060810
    [ 1.213260] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.213266] i915 0000:00:02.0: setting latency timer to 64
    [ 1.266284] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
    [ 1.266292] [drm] MTRR allocation failed. Graphics performance may suffer.
    [ 1.270572] i915 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 1.343070] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
    [ 1.367547] usb 1-1: new high speed USB device using ehci_hcd and address 2
    [ 1.458002] Console: switching to colour frame buffer device 170x48
    [ 1.465423] fb0: inteldrmfb frame buffer device
    [ 1.465433] drm: registered panic notifier
    [ 1.470395] acpi device:34: registered as cooling_device9
    [ 1.471439] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 1.471798] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.472291] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.481846] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
    [ 1.481856] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 1.482919] hub 1-1:1.0: USB hub found
    [ 1.483087] hub 1-1:1.0: 6 ports detected
    [ 1.585421] usb 2-1: new high speed USB device using ehci_hcd and address 2
    [ 1.699826] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
    [ 1.699830] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 1.700312] hub 2-1:1.0: USB hub found
    [ 1.700417] hub 2-1:1.0: 6 ports detected
    [ 1.774573] usb 1-1.4: new high speed USB device using ehci_hcd and address 3
    [ 1.899282] Synaptics Touchpad, model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x840300/0x120c00
    [ 1.941058] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
    [ 1.977942] initramfs: Probing PCI devices
    [ 2.015689] ahci 0000:00:1f.2: version 3.0
    [ 2.015703] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 2.015793] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.015822] ahci: SSS flag set, parallel bus scan disabled
    [ 2.023531] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1009
    [ 2.023541] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 2.023547] usb 1-1.4: Product: WebCam SC-13HDL10931N
    [ 2.023552] usb 1-1.4: Manufacturer: 123
    [ 2.026430] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
    [ 2.026439] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
    [ 2.026448] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.040492] scsi0 : ahci
    [ 2.041135] scsi1 : ahci
    [ 2.041833] scsi2 : ahci
    [ 2.042472] scsi3 : ahci
    [ 2.043094] scsi4 : ahci
    [ 2.043779] scsi5 : ahci
    [ 2.044584] ata1: SATA max UDMA/133 abar m2048@0xc0708000 port 0xc0708100 irq 41
    [ 2.044590] ata2: DUMMY
    [ 2.044594] ata3: DUMMY
    [ 2.044600] ata4: SATA max UDMA/133 abar m2048@0xc0708000 port 0xc0708280 irq 41
    [ 2.044607] ata5: SATA max UDMA/133 abar m2048@0xc0708000 port 0xc0708300 irq 41
    [ 2.044612] ata6: DUMMY
    [ 2.270578] usb 2-1.3: new full speed USB device using ehci_hcd and address 3
    [ 2.350389] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.355894] ata1.00: ATA-8: SAMSUNG MZMPA128HMFU-00000, AXM1701Q, max UDMA/133
    [ 2.355904] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.357617] ata1.00: configured for UDMA/133
    [ 2.358030] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMPA128 AXM1 PQ: 0 ANSI: 5
    [ 2.359809] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 2.359976] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=219a
    [ 2.359989] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 2.359999] usb 2-1.3: Product: Broadcom Bluetooth Device
    [ 2.360008] usb 2-1.3: Manufacturer: Broadcom Corp
    [ 2.360015] usb 2-1.3: SerialNumber: 001BB1D583EC
    [ 2.360086] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.360098] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.360182] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.360483] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 2.361820] sda: sda1 sda2
    [ 2.364052] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.666328] ata4: SATA link down (SStatus 0 SControl 300)
    [ 2.971326] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.973466] initramfs: Probing USB devices
    [ 2.997841] initramfs: Probing LVM devices
    [ 3.011348] device-mapper: uevent: version 1.0.3
    [ 3.011568] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
    [ 3.067864] initramfs: Attempting to resume from hibernation
    [ 3.188454] video LNXVIDEO:00: Restoring backlight state
    [ 3.201243] initramfs: Mounting rootfs: /dev/mapper/VolGroup-lv_root (ext4)
    [ 3.204050] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
    [ 3.204061] EXT4-fs (dm-0): write access will be enabled during recovery
    [ 3.240136] EXT4-fs (dm-0): recovery complete
    [ 3.240335] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.246348] initramfs: Switching to the real root
    [ 3.571399] udev[261]: starting version 166
    [ 3.652897] wmi: Mapper loaded
    [ 3.671373] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.700120] EXT4-fs (dm-0): re-mounted. Opts: (null)
    [ 3.705189] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.705268] xhci_hcd 0000:03:00.0: setting latency timer to 64
    [ 3.705276] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 3.705292] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
    [ 3.713601] Linux video capture interface: v2.00
    [ 3.717359] xhci_hcd 0000:03:00.0: irq 16, io mem 0xc0500000
    [ 3.717506] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
    [ 3.717514] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 3.717521] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 3.717528] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 3.717535] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
    [ 3.720767] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
    [ 3.720783] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
    [ 3.720787] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.720791] usb usb3: Product: xHCI Host Controller
    [ 3.720794] usb usb3: Manufacturer: Linux 2.6.37.6 xhci_hcd
    [ 3.720796] usb usb3: SerialNumber: 0000:03:00.0
    [ 3.720927] xHCI xhci_add_endpoint called for root hub
    [ 3.720931] xHCI xhci_check_bandwidth called for root hub
    [ 3.720989] hub 3-0:1.0: USB hub found
    [ 3.720996] hub 3-0:1.0: 4 ports detected
    [ 3.724572] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x12
    [ 3.724585] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x12
    [ 3.724596] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x12
    [ 3.724606] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x12
    [ 3.724669] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [ 3.740301] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.740359] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 3.740434] r8169 0000:02:00.0: setting latency timer to 64
    [ 3.740442] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
    [ 3.740526] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 3.741199] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc900057f0000, e8:11:32:27:b8:b0, XID 0c200000 IRQ 47
    [ 3.753855] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL10931N (2232:1009)
    [ 3.777183] Bluetooth: Core ver 2.15
    [ 3.777214] NET: Registered protocol family 31
    [ 3.777216] Bluetooth: HCI device and connection manager initialized
    [ 3.777220] Bluetooth: HCI socket layer initialized
    [ 3.784363] input: WebCam SC-13HDL10931N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
    [ 3.784784] usbcore: registered new interface driver uvcvideo
    [ 3.784787] USB Video Class driver (v1.0.0)
    [ 3.797985] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 3.798647] usbcore: registered new interface driver btusb
    [ 3.897723] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 3.897852] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
    [ 3.897922] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 3.970203] EXT4-fs (dm-0): re-mounted. Opts: (null)
    [ 4.204384] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.219019] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.343700] Adding 10190844k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:10190844k
    [ 4.425875] hda_codec: ALC269VB: BIOS auto-probing.
    [ 4.438345] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 4.438450] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 5.496335] r8169 0000:02:00.0: eth0: link up
    [ 5.496344] r8169 0000:02:00.0: eth0: link up
    [ 5.828305] comar[662]: segfault at 21 ip 0000000000000021 sp 00007fffbc3070f8 error 14 in comar[400000+12000]
    [ 6.184657] Bluetooth: L2CAP ver 2.15
    [ 6.184662] Bluetooth: L2CAP socket layer initialized
    [ 6.207879] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 6.207883] Bluetooth: BNEP filters: protocol multicast
    [ 6.225489] Bluetooth: SCO (Voice Link) ver 0.6
    [ 6.225493] Bluetooth: SCO socket layer initialized
    [ 6.268789] Bluetooth: RFCOMM TTY layer initialized
    [ 6.268797] Bluetooth: RFCOMM socket layer initialized
    [ 6.268801] Bluetooth: RFCOMM ver 1.11
    [ 6.596715] atkbd serio0: Unknown key pressed (translated set 2, code 0xc3 on isa0060/serio0).
    [ 6.596723] atkbd serio0: Use 'setkeycodes e043 <keycode>' to make it known.
    [ 6.658739] md: raid0 personality registered for level 0
    [ 6.664472] md: raid1 personality registered for level 1
    [ 6.667780] async_tx: api initialized (async)
    [ 6.688645] raid6: int64x1 1441 MB/s
    [ 6.705671] raid6: int64x2 1375 MB/s
    [ 6.722667] raid6: int64x4 1335 MB/s
    [ 6.739698] raid6: int64x8 847 MB/s
    [ 6.756641] raid6: sse2x1 2218 MB/s
    [ 6.773640] raid6: sse2x2 4554 MB/s
    [ 6.790631] raid6: sse2x4 5300 MB/s
    [ 6.790634] raid6: using algorithm sse2x4 (5300 MB/s)
    [ 6.793883] xor: automatically using best checksumming function: generic_sse
    [ 6.798622] generic_sse: 6192.000 MB/sec
    [ 6.798628] xor: using function: generic_sse (6192.000 MB/sec)
    [ 6.808325] md: raid6 personality registered for level 6
    [ 6.808331] md: raid5 personality registered for level 5
    [ 6.808335] md: raid4 personality registered for level 4
    [ 6.812248] md: raid10 personality registered for level 10
    [ 10.687383] atkbd serio0: Unknown key pressed (translated set 2, code 0xc4 on isa0060/serio0).
    [ 10.687397] atkbd serio0: Use 'setkeycodes e044 <keycode>' to make it known.
    [ 16.430216] eth0: no IPv6 routers present
    lsmod:
    Module Size Used by
    raid10 19399 0
    raid456 46617 0
    async_pq 3759 1 raid456
    async_xor 2744 2 raid456,async_pq
    xor 4770 1 async_xor
    async_memcpy 1617 1 raid456
    async_raid6_recov 1680 1 raid456
    raid6_pq 78720 2 async_pq,async_raid6_recov
    async_tx 2643 5 raid456,async_pq,async_xor,async_memcpy,async_raid 6_recov
    raid1 18983 0
    raid0 7378 0
    rfcomm 31159 4
    sco 8645 2
    bnep 10412 2
    l2cap 32584 16 rfcomm,bnep
    snd_hda_codec_hdmi 21817 1
    snd_hda_codec_realtek 304373 1
    snd_hda_intel 22753 2
    snd_hda_codec 84494 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel
    snd_hwdep 5832 1 snd_hda_codec
    snd_seq_dummy 1582 0
    snd_seq_oss 25715 0
    snd_seq_midi_event 6545 1 snd_seq_oss
    snd_seq 47525 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 6204 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss 33619 0
    snd_mixer_oss 13171 1 snd_pcm_oss
    btusb 11467 2
    snd_pcm 75318 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd _pcm_oss
    bluetooth 53891 9 rfcomm,sco,bnep,l2cap,btusb
    uvcvideo 54783 0
    r8169 33653 0
    rfkill 17475 2 bluetooth
    microcode 22108 0
    snd_timer 19055 2 snd_seq,snd_pcm
    videodev 67872 1 uvcvideo
    xhci_hcd 54102 0
    v4l1_compat 12095 2 uvcvideo,videodev
    v4l2_compat_ioctl32 9516 1 videodev
    mii 4653 1 r8169
    snd 63018 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel,snd_hda_codec,snd_hwdep,snd_seq_oss,snd_seq,s nd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_timer
    joydev 9569 0
    soundcore 6773 1 snd
    shpchp 24398 0
    snd_page_alloc 7878 2 snd_hda_intel,snd_pcm
    wmi 8896 0
    dm_mod 64216 9
    ahci 20350 2
    libahci 19536 1 ahci
    i915 320794 3
    drm_kms_helper 29164 1 i915
    drm 191690 4 i915,drm_kms_helper
    i2c_algo_bit 4770 1 i915
    video 13899 1 i915
    output 2287 1 video
    uname-r:
    2.6.37.6

  3. #3
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,025
    Hello and Welcome!

    I've not used Pardus, so I'm not sure about package management there.
    But your wireless card does have drivers available. Information can be found on this page.
    Perhaps someone who is more familiar with Pardus can chip in with more specific instruction.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  4. $spacer_open
    $spacer_close
  5. #4
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9
    Quote Originally Posted by jayd512 View Post
    Hello and Welcome!

    I've not used Pardus, so I'm not sure about package management there.
    But your wireless card does have drivers available. Information can be found on this page.
    Perhaps someone who is more familiar with Pardus can chip in with more specific instruction.
    Thank you for the reply! Sorry I didn't respond earlier - probably should have after I read your post. I tried a few things on the site that you linked me to, but still couldn't get the wireless to work. Could somebody please help? I'd really prefer not to switch distros...so far I have really liked using Pardus (minus the wireless issue lol).

  6. #5
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,025
    I tried a few things on the site that you linked me to, but still couldn't get the wireless to work.
    What things did you try? And what errors did you get?
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  7. #6
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9
    Quote Originally Posted by jayd512 View Post
    What things did you try? And what errors did you get?
    I downloaded linux-firmware from git.kernel and copied and pasted bcm43xx-0.fw and bcm43xx_hdr-0.fw to /lib/firmware/brcm. I then restarted my laptop and noticed wireless still wasn't activated. I looked back into /lib/firmware/brcm to see if the files were still there - they were. I deleted two .fw that looked very similar to the ones that I copied and pasted thinking they would interfere with the new firmware. After that I restarted and came back to see wireless still not working. I did see the patches at the bottom, but, even though they say what to do, I didn't understand what the instructions wanted me to do...I've used Linux for maybe 4 years, but I haven't exactly made an effort to learn much about navigation in the terminal.

  8. #7
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,025
    Well, after Googling a bit on how to install software on Pardus, you might be able to use the terminal to install what you need...
    But like I said before, I've never used Pardus, so this might take a little trial and error on your part to get it going.

    Try this, as root:
    Code:
    pisi install b43 b43-fwcutter
    Then, after a reboot, hopefully you'll have a wireless connection.
    If not, post the output of the following commands:
    Code:
    ifconfig -a
    dmesg
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  9. #8
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9
    pardus2011 andddlay # pisi install b43 b43-fwcutter
    The following package(s) are already installed and are not going to be installed again:
    b43-fwcutter
    System error. Program terminated.
    Repo item b43 not found
    Please use 'pisi help' for general help.
    Use --debug to see a traceback.
    pardus2011 andddlay # ifconfig -a
    eth0 Link encap:Ethernet HWaddr E8:11:32:27:B8:B0
    inet addr:69.14.195.61 Bcast:69.14.195.255 Mask:255.255.252.0
    inet6 addr: fe80::ea11:32ff:fe27:b8b0/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:24767 errors:0 dropped:0 overruns:0 frame:0
    TX packets:3535 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:2982857 (2.8 Mb) TX bytes:573749 (560.3 Kb)
    Interrupt:47 Base address:0x8000

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:20 errors:0 dropped:0 overruns:0 frame:0
    TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1080 (1.0 Kb) TX bytes:1080 (1.0 Kb)

    pardus2011 andddlay # dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.37.6 (pardus@buildfarm) (gcc version 4.5.2 (Pardus Linux) ) #1 SMP Wed Mar 30 15:28:53 EEST 2011
    [ 0.000000] Command line: root=/dev/mapper/VolGroup-lv_root resume=/dev/mapper/VolGroup-lv_swap splash quiet
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
    [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000aaa75000 (usable)
    [ 0.000000] BIOS-e820: 00000000aaa75000 - 00000000aaa77000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aaa77000 - 00000000aaa78000 (usable)
    [ 0.000000] BIOS-e820: 00000000aaa78000 - 00000000aaa7c000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aaa7c000 - 00000000aad0f000 (usable)
    [ 0.000000] BIOS-e820: 00000000aad0f000 - 00000000aae76000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aae76000 - 00000000aae96000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000aae96000 - 00000000aaf1f000 (reserved)
    [ 0.000000] BIOS-e820: 00000000aaf1f000 - 00000000aaf9f000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000aaf9f000 - 00000000aafff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000aafff000 - 00000000ab000000 (usable)
    [ 0.000000] BIOS-e820: 00000000ab000000 - 00000000afa00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000024fe00000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 90X3A/90X3A, BIOS 03HL 02/10/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x24fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0AC000000 mask FFC000000 uncachable
    [ 0.000000] 5 base 0AB000000 mask FFF000000 uncachable
    [ 0.000000] 6 base 100000000 mask F00000000 write-back
    [ 0.000000] 7 base 200000000 mask FC0000000 write-back
    [ 0.000000] 8 base 240000000 mask FE0000000 write-back
    [ 0.000000] 9 base 250000000 mask FF0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xab000 max_arch_pfn = 0x400000000
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000ab000000
    [ 0.000000] 0000000000 - 00ab000000 page 2M
    [ 0.000000] kernel direct mapping tables up to ab000000 @ 1fffc000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000024fe00000
    [ 0.000000] 0100000000 - 024fe00000 page 2M
    [ 0.000000] kernel direct mapping tables up to 24fe00000 @ aad04000-aad0f000
    [ 0.000000] RAMDISK: 37707000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 SECCSD)
    [ 0.000000] ACPI: XSDT 00000000aaffe120 00084 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
    [ 0.000000] ACPI: FACP 00000000aafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000aaff2000 0827C (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000aaf3e000 00040
    [ 0.000000] ACPI: SLIC 00000000aaffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
    [ 0.000000] ACPI: SSDT 00000000aaffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
    [ 0.000000] ACPI: ASF! 00000000aaff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: HPET 00000000aafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000aafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000aafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: SSDT 00000000aafeb000 00780 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000aafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: UEFI 00000000aafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000aafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000aafe7000 00256 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000024fe00000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000024fe00000
    [ 0.000000] NODE_DATA [000000024fdec000 - 000000024fdfffff]
    [ 0.000000] [ffffea0000000000-ffffea00081fffff] PMD -> [ffff880247c00000-ffff88024edfffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0024fe00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[6] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009d
    [ 0.000000] 0: 0x00000100 -> 0x000aaa75
    [ 0.000000] 0: 0x000aaa77 -> 0x000aaa78
    [ 0.000000] 0: 0x000aaa7c -> 0x000aad0f
    [ 0.000000] 0: 0x000aafff -> 0x000ab000
    [ 0.000000] 0: 0x00100000 -> 0x0024fe00
    [ 0.000000] On node 0 totalpages: 2075287
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3919 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 681282 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18809 pages used for memmap
    [ 0.000000] Normal zone: 1356935 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000aaa75000 - 00000000aaa77000
    [ 0.000000] PM: Registered nosave memory: 00000000aaa78000 - 00000000aaa7c000
    [ 0.000000] PM: Registered nosave memory: 00000000aad0f000 - 00000000aae76000
    [ 0.000000] PM: Registered nosave memory: 00000000aae76000 - 00000000aae96000
    [ 0.000000] PM: Registered nosave memory: 00000000aae96000 - 00000000aaf1f000
    [ 0.000000] PM: Registered nosave memory: 00000000aaf1f000 - 00000000aaf9f000
    [ 0.000000] PM: Registered nosave memory: 00000000aaf9f000 - 00000000aafff000
    [ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
    [ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
    [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
    [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:48600000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800aa800000 s83648 r8192 d22848 u262144
    [ 0.000000] pcpu-alloc: s83648 r8192 d22848 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042136
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/mapper/VolGroup-lv_root resume=/dev/mapper/VolGroup-lv_swap splash quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8094712k/9697280k available (4661k kernel code, 1396132k absent, 206436k reserved, 6726k data, 720k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] NR_IRQS:33024 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 83886080 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.001000] Detected 1396.769 MHz processor.
    [ 0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.53 BogoMIPS (lpj=1396769)
    [ 0.000017] pid_max: default: 32768 minimum: 301
    [ 0.000056] Security Framework initialized
    [ 0.000062] AppArmor: AppArmor disabled by boot time parameter
    [ 0.001523] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.004671] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.005875] Mount-cache hash table entries: 256
    [ 0.006077] Initializing cgroup subsys ns
    [ 0.006081] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.006084] Initializing cgroup subsys cpuacct
    [ 0.006092] Initializing cgroup subsys memory
    [ 0.006115] Initializing cgroup subsys devices
    [ 0.006119] Initializing cgroup subsys freezer
    [ 0.006122] Initializing cgroup subsys net_cls
    [ 0.006125] Initializing cgroup subsys blkio
    [ 0.006181] CPU: Physical Processor ID: 0
    [ 0.006183] CPU: Processor Core ID: 0
    [ 0.006192] mce: CPU supports 7 MCE banks
    [ 0.006210] CPU0: Thermal monitoring enabled (TM1)
    [ 0.006221] using mwait in idle threads.
    [ 0.006223] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.006232] ... version: 3
    [ 0.006234] ... bit width: 48
    [ 0.006237] ... generic registers: 4
    [ 0.006239] ... value mask: 0000ffffffffffff
    [ 0.006242] ... max period: 000000007fffffff
    [ 0.006244] ... fixed-purpose events: 3
    [ 0.006246] ... event mask: 000000070000000f
    [ 0.007070] ACPI: Core revision 20101013
    [ 0.040944] Setting APIC routing to flat
    [ 0.041311] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.051319] CPU0: Intel(R) Core(TM) i5-2537M CPU @ 1.40GHz stepping 07
    [ 0.153542] Booting Node 0, Processors #1 #2 #3
    [ 0.426290] Brought up 4 CPUs
    [ 0.426295] Total of 4 processors activated (11173.50 BogoMIPS).
    [ 0.429348] devtmpfs: initialized
    [ 0.437210] atomic64 test passed for x86-64 platform with CX8 and with SSE
    [ 0.437219] regulator: core version 0.5
    [ 0.437287] regulator: dummy:
    [ 0.437349] NET: Registered protocol family 16
    [ 0.437562] ACPI: bus type pci registered
    [ 0.437704] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.437709] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.450501] PCI: Using configuration type 1 for base access
    [ 0.452544] bio: create slab <bio-0> at 0
    [ 0.455867] ACPI: EC: Look up EC in DSDT
    [ 0.459009] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.471325] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.477990] ACPI: SSDT 00000000aaf10718 00670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.478835] ACPI: Dynamic OEM Table Load:
    [ 0.478839] ACPI: SSDT (null) 00670 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.482002] ACPI: SSDT 00000000aaf11a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.482950] ACPI: Dynamic OEM Table Load:
    [ 0.482954] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.486510] ACPI: SSDT 00000000aaf0fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.487338] ACPI: Dynamic OEM Table Load:
    [ 0.487342] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.504595] ACPI: Interpreter enabled
    [ 0.504601] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.504648] ACPI: Using IOAPIC for interrupt routing
    [ 0.513268] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
    [ 0.527112] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.527182] ACPI: Power Resource [FN00] (off)
    [ 0.527219] ACPI: Power Resource [FN01] (off)
    [ 0.527248] ACPI: Power Resource [FN02] (off)
    [ 0.527277] ACPI: Power Resource [FN03] (off)
    [ 0.527305] ACPI: Power Resource [FN04] (off)
    [ 0.527666] ACPI: No dock devices found.
    [ 0.527669] HEST: Table not found.
    [ 0.527673] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.529118] \_SB_.PCI0:_OSC invalid UUID
    [ 0.529120] _OSC request data:1 8 1f
    [ 0.529127] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.531072] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.531076] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.531080] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.531085] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
    [ 0.531088] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
    [ 0.531107] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
    [ 0.531160] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
    [ 0.531178] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 0.531193] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 0.531201] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
    [ 0.531292] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
    [ 0.531333] pci 0000:00:16.0: reg 10: [mem 0xc0705000-0xc070500f 64bit]
    [ 0.531440] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.531447] pci 0000:00:16.0: PME# disabled
    [ 0.531506] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
    [ 0.531542] pci 0000:00:1a.0: reg 10: [mem 0xc070a000-0xc070a3ff]
    [ 0.531671] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.531677] pci 0000:00:1a.0: PME# disabled
    [ 0.531720] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
    [ 0.531750] pci 0000:00:1b.0: reg 10: [mem 0xc0700000-0xc0703fff 64bit]
    [ 0.531861] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.531868] pci 0000:00:1b.0: PME# disabled
    [ 0.531903] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
    [ 0.532018] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.532024] pci 0000:00:1c.0: PME# disabled
    [ 0.532067] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
    [ 0.532183] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.532193] pci 0000:00:1c.3: PME# disabled
    [ 0.532231] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
    [ 0.532347] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.532354] pci 0000:00:1c.4: PME# disabled
    [ 0.532407] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
    [ 0.532443] pci 0000:00:1d.0: reg 10: [mem 0xc0709000-0xc07093ff]
    [ 0.532571] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.532578] pci 0000:00:1d.0: PME# disabled
    [ 0.532617] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
    [ 0.532806] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
    [ 0.532846] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
    [ 0.532862] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
    [ 0.532879] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
    [ 0.532895] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
    [ 0.532911] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
    [ 0.532928] pci 0000:00:1f.2: reg 24: [mem 0xc0708000-0xc07087ff]
    [ 0.532998] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.533004] pci 0000:00:1f.2: PME# disabled
    [ 0.533036] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
    [ 0.533066] pci 0000:00:1f.3: reg 10: [mem 0xc0704000-0xc07040ff 64bit]
    [ 0.533108] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    [ 0.533282] pci 0000:01:00.0: [14e4:4357] type 0 class 0x000280
    [ 0.533323] pci 0000:01:00.0: reg 10: [mem 0xc0600000-0xc0603fff 64bit]
    [ 0.533488] pci 0000:01:00.0: supports D1 D2
    [ 0.533491] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.533499] pci 0000:01:00.0: PME# disabled
    [ 0.535226] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.535237] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.535248] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
    [ 0.535264] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.535439] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.535516] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.535651] pci 0000:02:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
    [ 0.535735] pci 0000:02:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
    [ 0.535974] pci 0000:02:00.0: supports D1 D2
    [ 0.535977] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.535994] pci 0000:02:00.0: PME# disabled
    [ 0.537242] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.537252] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.537262] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.537284] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.537421] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
    [ 0.537479] pci 0000:03:00.0: reg 10: [mem 0xc0500000-0xc0501fff 64bit]
    [ 0.537710] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.537721] pci 0000:03:00.0: PME# disabled
    [ 0.539223] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.539233] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.539244] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
    [ 0.539259] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.539303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.539636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.539734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.539825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.540210] \_SB_.PCI0:_OSC invalid UUID
    [ 0.540212] _OSC request data:1 1f 1f
    [ 0.540218] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.540459] \_SB_.PCI0:_OSC invalid UUID
    [ 0.540461] _OSC request data:1 0 1d
    [ 0.547481] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.547604] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.547726] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.547848] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.547972] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 10 11 12 14 15)
    [ 0.548090] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.548219] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.548342] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
    [ 0.548554] SCSI subsystem initialized
    [ 0.548632] libata version 3.00 loaded.
    [ 0.548722] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
    [ 0.548734] vgaarb: loaded
    [ 0.548780] usbcore: registered new interface driver usbfs
    [ 0.548805] usbcore: registered new interface driver hub
    [ 0.548846] usbcore: registered new device driver usb
    [ 0.548998] PCI: Using ACPI for IRQ routing
    [ 0.549001] PCI: pci_cache_line_size set to 64 bytes
    [ 0.549108] reserve RAM buffer: 000000000009d800 - 000000000009ffff
    [ 0.549112] reserve RAM buffer: 00000000aaa75000 - 00000000abffffff
    [ 0.549118] reserve RAM buffer: 00000000aaa78000 - 00000000abffffff
    [ 0.549124] reserve RAM buffer: 00000000aad0f000 - 00000000abffffff
    [ 0.549129] reserve RAM buffer: 00000000ab000000 - 00000000abffffff
    [ 0.549132] reserve RAM buffer: 000000024fe00000 - 000000024fffffff
    [ 0.549293] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.549302] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.551333] Switching to clocksource tsc
    [ 0.553606] pnp: PnP ACPI init
    [ 0.553630] ACPI: bus type pnp registered
    [ 0.554625] pnp 00:00: [bus 00-3e]
    [ 0.554629] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.554632] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.554635] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.554638] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.554641] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.554645] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.554648] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.554651] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.554654] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.554657] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.554660] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.554663] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.554666] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.554669] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.554672] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.554675] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.554678] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.554682] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
    [ 0.554687] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.554786] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.556315] pnp 00:01: [io 0x0000-0x001f]
    [ 0.556320] pnp 00:01: [io 0x0081-0x0091]
    [ 0.556324] pnp 00:01: [io 0x0093-0x009f]
    [ 0.556327] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.556330] pnp 00:01: [dma 4]
    [ 0.556379] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.556396] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 0.556437] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.556608] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.556654] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.556675] pnp 00:04: [io 0x00f0]
    [ 0.556686] pnp 00:04: [irq 13]
    [ 0.556728] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.556749] pnp 00:05: [io 0x002e-0x002f]
    [ 0.556752] pnp 00:05: [io 0x004e-0x004f]
    [ 0.556754] pnp 00:05: [io 0x0061]
    [ 0.556757] pnp 00:05: [io 0x0063]
    [ 0.556759] pnp 00:05: [io 0x0065]
    [ 0.556762] pnp 00:05: [io 0x0067]
    [ 0.556764] pnp 00:05: [io 0x0070]
    [ 0.556766] pnp 00:05: [io 0x0080]
    [ 0.556769] pnp 00:05: [io 0x0092]
    [ 0.556771] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.556774] pnp 00:05: [io 0x0680-0x069f]
    [ 0.556777] pnp 00:05: [io 0x1000-0x100f]
    [ 0.556779] pnp 00:05: [io 0x5000-0x5003]
    [ 0.556782] pnp 00:05: [io 0xffff]
    [ 0.556784] pnp 00:05: [io 0x0400-0x0453]
    [ 0.556787] pnp 00:05: [io 0x0458-0x047f]
    [ 0.556790] pnp 00:05: [io 0x0500-0x057f]
    [ 0.556792] pnp 00:05: [io 0x0a00-0x0a0f]
    [ 0.556795] pnp 00:05: [io 0x164e-0x164f]
    [ 0.556798] pnp 00:05: [io 0x5000-0x500f]
    [ 0.556868] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.556884] pnp 00:06: [io 0x0070-0x0077]
    [ 0.556892] pnp 00:06: [irq 8]
    [ 0.556934] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.557001] pnp 00:07: [io 0x0454-0x0457]
    [ 0.557060] pnp 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.557092] pnp 00:08: [io 0x0060]
    [ 0.557094] pnp 00:08: [io 0x0064]
    [ 0.557101] pnp 00:08: [irq 1]
    [ 0.557146] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.557177] pnp 00:09: [irq 12]
    [ 0.557229] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.557565] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.557568] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
    [ 0.557571] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
    [ 0.557574] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
    [ 0.557577] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
    [ 0.557584] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 0.557587] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
    [ 0.557590] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 0.557593] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 0.557596] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 0.557599] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.557668] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.559294] pnp 00:0b: can't evaluate _CRS: 12311
    [ 0.559444] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.559534] pnp: PnP ACPI: found 12 devices
    [ 0.559537] ACPI: ACPI bus type pnp unregistered
    [ 0.559552] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.559556] system 00:05: [io 0x1000-0x100f] has been reserved
    [ 0.559560] system 00:05: [io 0x5000-0x5003] has been reserved
    [ 0.559564] system 00:05: [io 0xffff] has been reserved
    [ 0.559567] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 0.559571] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.559575] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.559578] system 00:05: [io 0x0a00-0x0a0f] has been reserved
    [ 0.559582] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.559586] system 00:05: [io 0x5000-0x500f] could not be reserved
    [ 0.559594] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 0.559603] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.559607] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.559611] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.559615] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.559619] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.559623] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.559627] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.559631] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.559635] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.559639] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.567001] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.567004] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.567014] pci 0000:00:1c.0: bridge window [mem 0xc0600000-0xc06fffff]
    [ 0.567020] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.567032] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.567036] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.567045] pci 0000:00:1c.3: bridge window [mem disabled]
    [ 0.567053] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.567064] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.567067] pci 0000:00:1c.4: bridge window [io disabled]
    [ 0.567076] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
    [ 0.567082] pci 0000:00:1c.4: bridge window [mem pref disabled]
    [ 0.567110] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.567118] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.567133] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 0.567140] pci 0000:00:1c.3: setting latency timer to 64
    [ 0.567150] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.567157] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.567163] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.567166] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.567169] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.567173] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
    [ 0.567176] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.567184] pci_bus 0000:01: resource 1 [mem 0xc0600000-0xc06fffff]
    [ 0.567187] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.567190] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.567194] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
    [ 0.567243] NET: Registered protocol family 2
    [ 0.567691] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.571087] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.573250] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.573442] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.573445] TCP reno registered
    [ 0.573474] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.573536] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.573764] NET: Registered protocol family 1
    [ 0.573786] pci 0000:00:02.0: Boot video device
    [ 0.573934] PCI: CLS 64 bytes, default 64
    [ 0.573992] Unpacking initramfs...
    [ 0.910632] Freeing initrd memory: 9124k freed
    [ 0.913378] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.913384] Placing 64MB software IO TLB between ffff8800a6800000 - ffff8800aa800000
    [ 0.913387] software IO TLB at phys 0xa6800000 - 0xaa800000
    [ 0.914512] audit: initializing netlink socket (disabled)
    [ 0.914525] type=2000 audit(1310859034.738:1): initialized
    [ 0.949639] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.952566] VFS: Disk quotas dquot_6.5.2
    [ 0.952652] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.953426] Registering unionfs 2.5.7 (for 2.6.37-rc1)
    [ 0.953649] fuse init (API version 7.15)
    [ 0.954049] aufs 2.1-37
    [ 0.954055] msgmni has been set to 15827
    [ 0.954559] alg: No test for stdrng (krng)
    [ 0.954693] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.954724] io scheduler noop registered
    [ 0.954727] io scheduler deadline registered
    [ 0.954804] io scheduler cfq registered (default)
    [ 0.955007] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.955052] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.955226] intel_idle: MWAIT substates: 0x21120
    [ 0.955228] intel_idle: v0.4 model 0x2A
    [ 0.955231] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.959145] ACPI: AC Adapter [ADP1] (on-line)
    [ 0.959391] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
    [ 0.961181] ACPI: Lid Switch [LID0]
    [ 0.961313] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 0.961320] ACPI: Power Button [PWRB]
    [ 0.961394] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 0.961399] ACPI: Sleep Button [SLPB]
    [ 0.961479] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 0.961484] ACPI: Power Button [PWRF]
    [ 0.963254] ACPI: Fan [FAN0] (off)
    [ 0.963341] ACPI: Fan [FAN1] (off)
    [ 0.963420] ACPI: Fan [FAN2] (off)
    [ 0.963501] ACPI: Fan [FAN3] (off)
    [ 0.963580] ACPI: Fan [FAN4] (off)
    [ 0.963878] ACPI: acpi_idle yielding to intel_idle
    [ 0.974425] thermal LNXTHERM:00: registered as thermal_zone0
    [ 0.974430] ACPI: Thermal Zone [TZ00] (63 C)
    [ 0.974851] thermal LNXTHERM:01: registered as thermal_zone1
    [ 0.974855] ACPI: Thermal Zone [TZ01] (30 C)
    [ 0.974935] ERST: Table is not found!
    [ 0.974938] XENFS: not registering filesystem on non-xen platform
    [ 0.976443] Linux agpgart interface v0.103
    [ 0.976550] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
    [ 0.976683] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 0.978316] agpgart-intel 0000:00:00.0: detected 65536K stolen memory, trimming to 32768K
    [ 1.020338] ACPI: Battery Slot [BAT1] (battery present)
    [ 1.029113] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
    [ 1.029185] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 1.051328] loop: module loaded
    [ 1.051345] st: Version 20100829, fixed bufsize 32768, s/g segs 256
    [ 1.051531] Fixed MDIO Bus: probed
    [ 1.051562] console [netcon0] enabled
    [ 1.051564] netconsole: network logging started
    [ 1.051579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.051604] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.051635] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.051640] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.051666] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.054191] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.058080] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.058107] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc070a000
    [ 1.067127] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.067173] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.067180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.067185] usb usb1: Product: EHCI Host Controller
    [ 1.067190] usb usb1: Manufacturer: Linux 2.6.37.6 ehci_hcd
    [ 1.067204] usb usb1: SerialNumber: 0000:00:1a.0
    [ 1.067354] hub 1-0:1.0: USB hub found
    [ 1.067360] hub 1-0:1.0: 2 ports detected
    [ 1.067460] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.067480] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.067485] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.067495] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.072182] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.076081] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.076102] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc0709000
    [ 1.085122] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.085159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.085165] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.085171] usb usb2: Product: EHCI Host Controller
    [ 1.085175] usb usb2: Manufacturer: Linux 2.6.37.6 ehci_hcd
    [ 1.085180] usb usb2: SerialNumber: 0000:00:1d.0
    [ 1.085339] hub 2-0:1.0: USB hub found
    [ 1.085344] hub 2-0:1.0: 2 ports detected
    [ 1.085447] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.085465] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.085616] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SPAD] at 0x60,0x64 irq 1,12
    [ 1.088950] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.088958] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.089100] mice: PS/2 mouse device common for all mice
    [ 1.093322] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.093356] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.093663] cpuidle: using governor ladder
    [ 1.094103] cpuidle: using governor menu
    [ 1.094718] usbcore: registered new interface driver usbhid
    [ 1.094721] usbhid: USB HID core driver
    [ 1.095407] NET: Registered protocol family 10
    [ 1.096169] lo: Disabled Privacy Extensions
    [ 1.096493] NET: Registered protocol family 17
    [ 1.096523] Registering the dns_resolver key type
    [ 1.121829] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [ 1.122013] registered taskstats version 1
    [ 1.122852] rtc_cmos 00:06: setting system clock to 2011-07-16 23:30:35 UTC (1310859035)
    [ 1.123189] Freeing unused kernel memory: 720k freed
    [ 1.123702] Write protecting the kernel read-only data: 10240k
    [ 1.124671] Freeing unused kernel memory: 1464k freed
    [ 1.127058] Freeing unused kernel memory: 1724k freed
    [ 1.131878] initramfs: Starting init on initramfs
    [ 1.151254] initramfs: Loading KMS driver
    [ 1.194686] [drm] Initialized drm 1.1.0 20060810
    [ 1.217044] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.217050] i915 0000:00:02.0: setting latency timer to 64
    [ 1.270023] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining
    [ 1.270032] [drm] MTRR allocation failed. Graphics performance may suffer.
    [ 1.279211] i915 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 1.352263] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
    [ 1.369319] usb 1-1: new high speed USB device using ehci_hcd and address 2
    [ 1.473878] Console: switching to colour frame buffer device 170x48
    [ 1.481270] fb0: inteldrmfb frame buffer device
    [ 1.481275] drm: registered panic notifier
    [ 1.483592] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
    [ 1.483596] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 1.484115] hub 1-1:1.0: USB hub found
    [ 1.484216] hub 1-1:1.0: 6 ports detected
    [ 1.484821] acpi device:34: registered as cooling_device9
    [ 1.485695] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 1.485957] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.486338] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.587201] usb 2-1: new high speed USB device using ehci_hcd and address 2
    [ 1.701561] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
    [ 1.701565] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 1.701949] hub 2-1:1.0: USB hub found
    [ 1.702062] hub 2-1:1.0: 6 ports detected
    [ 1.776340] usb 1-1.4: new high speed USB device using ehci_hcd and address 3
    [ 1.890961] Synaptics Touchpad, model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x840300/0x120c00
    [ 1.937005] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
    [ 1.987744] initramfs: Probing PCI devices
    [ 2.024018] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1009
    [ 2.024022] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 2.024026] usb 1-1.4: Product: WebCam SC-13HDL10931N
    [ 2.024029] usb 1-1.4: Manufacturer: 123
    [ 2.025444] ahci 0000:00:1f.2: version 3.0
    [ 2.025482] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 2.025582] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 2.025617] ahci: SSS flag set, parallel bus scan disabled
    [ 2.036213] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
    [ 2.036225] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
    [ 2.036238] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.046352] scsi0 : ahci
    [ 2.047017] scsi1 : ahci
    [ 2.047661] scsi2 : ahci
    [ 2.048330] scsi3 : ahci
    [ 2.048936] scsi4 : ahci
    [ 2.049562] scsi5 : ahci
    [ 2.050470] ata1: SATA max UDMA/133 abar m2048@0xc0708000 port 0xc0708100 irq 41
    [ 2.050480] ata2: DUMMY
    [ 2.050485] ata3: DUMMY
    [ 2.050492] ata4: SATA max UDMA/133 abar m2048@0xc0708000 port 0xc0708280 irq 41
    [ 2.050499] ata5: SATA max UDMA/133 abar m2048@0xc0708000 port 0xc0708300 irq 41
    [ 2.050504] ata6: DUMMY
    [ 2.271291] usb 2-1.3: new full speed USB device using ehci_hcd and address 3
    [ 2.355158] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.360858] ata1.00: ATA-8: SAMSUNG MZMPA128HMFU-00000, AXM1701Q, max UDMA/133
    [ 2.360868] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.361087] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=219a
    [ 2.361096] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 2.361103] usb 2-1.3: Product: Broadcom Bluetooth Device
    [ 2.361109] usb 2-1.3: Manufacturer: Broadcom Corp
    [ 2.361113] usb 2-1.3: SerialNumber: 001BB1D583EC
    [ 2.362446] ata1.00: configured for UDMA/133
    [ 2.362791] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMPA128 AXM1 PQ: 0 ANSI: 5
    [ 2.365419] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 2.365691] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.365702] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.365791] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.366020] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 2.367435] sda: sda1 sda2
    [ 2.368825] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.671107] ata4: SATA link down (SStatus 0 SControl 300)
    [ 2.976059] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.978243] initramfs: Probing USB devices
    [ 3.002803] initramfs: Probing LVM devices
    [ 3.021411] device-mapper: uevent: version 1.0.3
    [ 3.021839] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
    [ 3.083540] initramfs: Attempting to resume from hibernation
    [ 3.181235] video LNXVIDEO:00: Restoring backlight state
    [ 3.194433] initramfs: Mounting rootfs: /dev/mapper/VolGroup-lv_root (ext4)
    [ 3.197150] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
    [ 3.197161] EXT4-fs (dm-0): write access will be enabled during recovery
    [ 3.216795] EXT4-fs (dm-0): recovery complete
    [ 3.217001] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.224218] initramfs: Switching to the real root
    [ 3.552703] udev[260]: starting version 166
    [ 3.646319] wmi: Mapper loaded
    [ 3.658676] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.676326] EXT4-fs (dm-0): re-mounted. Opts: (null)
    [ 3.694266] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x12
    [ 3.694279] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x12
    [ 3.694291] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x12
    [ 3.694302] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x12
    [ 3.694364] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [ 3.699004] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.699079] xhci_hcd 0000:03:00.0: setting latency timer to 64
    [ 3.699086] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 3.699099] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
    [ 3.704362] xhci_hcd 0000:03:00.0: irq 16, io mem 0xc0500000
    [ 3.704490] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
    [ 3.704499] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 3.704506] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 3.704514] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 3.704522] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
    [ 3.708074] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
    [ 3.708091] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
    [ 3.708095] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.708099] usb usb3: Product: xHCI Host Controller
    [ 3.708102] usb usb3: Manufacturer: Linux 2.6.37.6 xhci_hcd
    [ 3.708105] usb usb3: SerialNumber: 0000:03:00.0
    [ 3.708237] xHCI xhci_add_endpoint called for root hub
    [ 3.708241] xHCI xhci_check_bandwidth called for root hub
    [ 3.708305] hub 3-0:1.0: USB hub found
    [ 3.708313] hub 3-0:1.0: 4 ports detected
    [ 3.711785] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.711846] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 3.711914] r8169 0000:02:00.0: setting latency timer to 64
    [ 3.711921] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
    [ 3.712150] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 3.712872] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90005898000, e8:11:32:27:b8:b0, XID 0c200000 IRQ 47
    [ 3.723404] Linux video capture interface: v2.00
    [ 3.743231] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL10931N (2232:1009)
    [ 3.756798] Bluetooth: Core ver 2.15
    [ 3.756846] NET: Registered protocol family 31
    [ 3.756849] Bluetooth: HCI device and connection manager initialized
    [ 3.756852] Bluetooth: HCI socket layer initialized
    [ 3.767408] input: WebCam SC-13HDL10931N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
    [ 3.767541] usbcore: registered new interface driver uvcvideo
    [ 3.767545] USB Video Class driver (v1.0.0)
    [ 3.776664] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 3.783523] EXT4-fs (dm-0): re-mounted. Opts: (null)
    [ 3.784482] usbcore: registered new interface driver btusb
    [ 3.902198] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 3.902335] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
    [ 3.902379] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 4.073852] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.088797] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.213823] Adding 10190844k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:10190844k
    [ 4.428804] hda_codec: ALC269VB: BIOS auto-probing.
    [ 4.440509] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 4.440588] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 5.551438] r8169 0000:02:00.0: eth0: link up
    [ 5.551447] r8169 0000:02:00.0: eth0: link up
    [ 6.227604] Bluetooth: L2CAP ver 2.15
    [ 6.227608] Bluetooth: L2CAP socket layer initialized
    [ 6.239826] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 6.239829] Bluetooth: BNEP filters: protocol multicast
    [ 6.259168] Bluetooth: SCO (Voice Link) ver 0.6
    [ 6.259172] Bluetooth: SCO socket layer initialized
    [ 6.307277] Bluetooth: RFCOMM TTY layer initialized
    [ 6.307293] Bluetooth: RFCOMM socket layer initialized
    [ 6.307296] Bluetooth: RFCOMM ver 1.11
    [ 16.349757] eth0: no IPv6 routers present
    [ 16.466452] atkbd serio0: Unknown key pressed (translated set 2, code 0xc3 on isa0060/serio0).
    [ 16.466460] atkbd serio0: Use 'setkeycodes e043 <keycode>' to make it known.
    [ 20.476093] atkbd serio0: Unknown key pressed (translated set 2, code 0xc4 on isa0060/serio0).
    [ 20.476101] atkbd serio0: Use 'setkeycodes e044 <keycode>' to make it known.
    pardus2011 andddlay #
    Through my ventures to solve this, I had already installed b43-fwcutter.

  10. #9
    Just Joined!
    Join Date
    Jul 2011
    Posts
    9
    :\ Perhaps I'll just stick with Ubuntu or Fedora until Linux Mint 11 KDE comes out.

  11. #10
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,025
    I'm afraid I'm out of suggestions.
    I just don't have the knowledge of that OS to be of much more help.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •