Find the answer to your Linux question:
Results 1 to 7 of 7
hello, i am a new member from Belgium I allmost gave up on ubuntu and was ready to try something new untill i found this thread. I hope you guys ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Sep 2011
    Posts
    4

    problem with wireless :S ImaNoob


    hello, i am a new member from Belgium

    I allmost gave up on ubuntu and was ready to try something new untill i found this thread. I hope you guys are able to solve this issue

    everything is added how ever i wonder if my pc is fully compatible with linux. allso i remember a version where all programs/ codex/ "drivers" are previously installed anyone have an idea on this one?
    as i allready told you i am noob at linux so plz be patient. i have done my share of research but lost faith rly. If i can get wireless installed i can work from linux itself witch will obviously be allot easyer. I have 2 wireless "cards" one usb stick (new wusb600n) one pci card dlink g520+. The pci card is not compatible with win 7 so maybe it is better to use this card?

    thx in advance!!
    Code:
    KERNEL VERSION UNAME 2.6.38-8-generec
    
    LSPCI -KNN *****************************
    
    
    
    00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
    	Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
    00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:09.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E) [1002:597e]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (rev 40)
    	Subsystem: Giga-byte Technology GA-MA770-DS3rev2.0 Motherboard [1458:b002]
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ohci_hcd
    00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ehci_hcd
    00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ohci_hcd
    00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ehci_hcd
    00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 42)
    	Kernel modules: sp5100_tco, i2c-piix4
    00:14.1 IDE interface [0101]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40)
    	Subsystem: Giga-byte Technology Device [1458:5002]
    	Kernel driver in use: pata_atiixp
    	Kernel modules: pata_atiixp
    00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
    	Subsystem: Giga-byte Technology Device [1458:a102]
    	Kernel driver in use: HDA Intel
    	Kernel modules: snd-hda-intel
    00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
    	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
    00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
    00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ohci_hcd
    00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:15.1 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a1]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:15.2 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a2]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:15.3 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a3]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:16.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ohci_hcd
    00:16.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ehci_hcd
    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
    	Kernel modules: amd64_edac_mod
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
    	Kernel driver in use: k10temp
    	Kernel modules: k10temp
    00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
    01:00.0 VGA compatible controller [0300]: nVidia Corporation GF110 [Geforce GTX 570] [10de:1081] (rev a1)
    	Subsystem: nVidia Corporation Leadtek WinFast GTX 570 [10de:087e]
    	Kernel driver in use: nouveau
    	Kernel modules: nouveau, nvidiafb
    01:00.1 Audio device [0403]: nVidia Corporation GF110 High Definition Audio Controller [10de:0e09] (rev a1)
    	Subsystem: nVidia Corporation Device [10de:087e]
    	Kernel driver in use: HDA Intel
    	Kernel modules: snd-hda-intel
    02:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03)
    	Subsystem: Giga-byte Technology Device [1458:5007]
    	Kernel driver in use: xhci_hcd
    	Kernel modules: xhci-hcd
    03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
    	Kernel driver in use: pata_jmicron
    	Kernel modules: pata_jmicron
    04:06.0 Network controller [0280]: Texas Instruments ACX 111 54Mbps Wireless Interface [104c:9066]
    	Subsystem: D-Link System Inc DWL-G520+ Wireless PCI Adapter [1186:3b04]
    04:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01)
    	Subsystem: Creatix Polymedia GmbH Medion 7134 [16be:0003]
    	Kernel driver in use: saa7134
    	Kernel modules: saa7134
    04:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000]
    	Kernel driver in use: firewire_ohci
    	Kernel modules: firewire-ohci
    05:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    05:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
    	Kernel driver in use: pata_jmicron
    	Kernel modules: pata_jmicron
    06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
    	Kernel driver in use: r8169
    	Kernel modules: r8169
    
    
    LSUSB*********************************************
    
    00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
    	Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
    00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:09.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E) [1002:597e]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (rev 40)
    	Subsystem: Giga-byte Technology GA-MA770-DS3rev2.0 Motherboard [1458:b002]
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ohci_hcd
    00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ehci_hcd
    00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ohci_hcd
    00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ehci_hcd
    00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 42)
    	Kernel modules: sp5100_tco, i2c-piix4
    00:14.1 IDE interface [0101]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40)
    	Subsystem: Giga-byte Technology Device [1458:5002]
    	Kernel driver in use: pata_atiixp
    	Kernel modules: pata_atiixp
    00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
    	Subsystem: Giga-byte Technology Device [1458:a102]
    	Kernel driver in use: HDA Intel
    	Kernel modules: snd-hda-intel
    00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
    	Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
    00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
    00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ohci_hcd
    00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:15.1 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a1]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:15.2 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a2]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:15.3 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a3]
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:16.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ohci_hcd
    00:16.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    	Subsystem: Giga-byte Technology Device [1458:5004]
    	Kernel driver in use: ehci_hcd
    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
    	Kernel modules: amd64_edac_mod
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
    	Kernel driver in use: k10temp
    	Kernel modules: k10temp
    00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
    01:00.0 VGA compatible controller [0300]: nVidia Corporation GF110 [Geforce GTX 570] [10de:1081] (rev a1)
    	Subsystem: nVidia Corporation Leadtek WinFast GTX 570 [10de:087e]
    	Kernel driver in use: nouveau
    	Kernel modules: nouveau, nvidiafb
    01:00.1 Audio device [0403]: nVidia Corporation GF110 High Definition Audio Controller [10de:0e09] (rev a1)
    	Subsystem: nVidia Corporation Device [10de:087e]
    	Kernel driver in use: HDA Intel
    	Kernel modules: snd-hda-intel
    02:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03)
    	Subsystem: Giga-byte Technology Device [1458:5007]
    	Kernel driver in use: xhci_hcd
    	Kernel modules: xhci-hcd
    03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
    	Kernel driver in use: pata_jmicron
    	Kernel modules: pata_jmicron
    04:06.0 Network controller [0280]: Texas Instruments ACX 111 54Mbps Wireless Interface [104c:9066]
    	Subsystem: D-Link System Inc DWL-G520+ Wireless PCI Adapter [1186:3b04]
    04:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01)
    	Subsystem: Creatix Polymedia GmbH Medion 7134 [16be:0003]
    	Kernel driver in use: saa7134
    	Kernel modules: saa7134
    04:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000]
    	Kernel driver in use: firewire_ohci
    	Kernel modules: firewire-ohci
    05:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    05:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
    	Kernel driver in use: pata_jmicron
    	Kernel modules: pata_jmicron
    06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
    	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
    	Kernel driver in use: r8169
    	Kernel modules: r8169
    
    LSMOD *****************************************
    
    Module                  Size  Used by
    snd_hda_codec_hdmi     28103  4 
    binfmt_misc            17565  1 
    rfcomm                 47694  8 
    sco                    18131  2 
    bnep                   18308  2 
    l2cap                  53570  16 rfcomm,bnep
    tda1004x               27553  0 
    saa7134_dvb            34309  0 
    videobuf_dvb           14147  1 saa7134_dvb
    dvb_core              110487  1 videobuf_dvb
    saa7134_alsa           18551  1 
    tuner_simple           18526  1 
    tuner_types            24211  1 tuner_simple
    tea5767                13298  0 
    tda9887                18263  1 
    snd_hda_codec_realtek   336693  1 
    arc4                   12529  2 
    tda8290                22627  0 
    tuner                  27386  2 
    rt2800usb              18235  0 
    rt2800lib              45181  1 rt2800usb
    crc_ccitt              12667  1 rt2800lib
    rt2x00usb              20330  1 rt2800usb
    rt2x00lib              49235  3 rt2800usb,rt2800lib,rt2x00usb
    snd_hda_intel          33211  2 
    mac80211              294370  3 rt2800lib,rt2x00usb,rt2x00lib
    snd_hda_codec         103804  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep              13604  1 snd_hda_codec
    cfg80211              178528  2 rt2x00lib,mac80211
    snd_pcm                96625  4 snd_hda_codec_hdmi,saa7134_alsa,snd_hda_intel,snd_hda_codec
    ppdev                  17113  0 
    snd_seq_midi           13324  0 
    snd_rawmidi            30486  1 snd_seq_midi
    gspca_zc3xx            52441  0 
    gspca_main             36853  1 gspca_zc3xx
    snd_seq_midi_event     14899  1 snd_seq_midi
    snd_seq                61621  2 snd_seq_midi,snd_seq_midi_event
    nouveau               682322  2 
    joydev                 17606  0 
    snd_timer              29602  2 snd_pcm,snd_seq
    saa7134               177094  2 saa7134_dvb,saa7134_alsa
    ttm                    76664  1 nouveau
    btusb                  18600  2 
    bluetooth              72448  9 rfcomm,sco,bnep,l2cap,btusb
    ati_remote             13942  0 
    ir_lirc_codec          12898  0 
    lirc_dev               19232  1 ir_lirc_codec
    edac_core              53845  0 
    ir_sony_decoder        12549  0 
    ir_jvc_decoder         12546  0 
    snd_seq_device         14462  3 snd_seq_midi,snd_rawmidi,snd_seq
    ir_rc6_decoder         12546  0 
    drm_kms_helper         42136  1 nouveau
    ir_rc5_decoder         12546  0 
    edac_mce_amd           23464  0 
    k10temp                13119  0 
    serio_raw              13166  0 
    ir_nec_decoder         12546  0 
    snd                    67382  17 snd_hda_codec_hdmi,saa7134_alsa,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    rc_core                26918  7 ir_lirc_codec,ir_sony_decoder,saa7134,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder
    v4l2_common            17647  2 tuner,saa7134
    videodev               82052  4 tuner,gspca_main,saa7134,v4l2_common
    v4l2_compat_ioctl32    17078  1 videodev
    videobuf_dma_sg        19307  3 saa7134_dvb,saa7134_alsa,saa7134
    sp5100_tco             13744  0 
    i2c_piix4              13303  0 
    videobuf_core          26135  3 videobuf_dvb,saa7134,videobuf_dma_sg
    tveeprom               21249  1 saa7134
    soundcore              12680  1 snd
    snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
    drm                   227495  4 nouveau,ttm,drm_kms_helper
    xhci_hcd               77643  0 
    i2c_algo_bit           13400  1 nouveau
    video                  19438  1 nouveau
    parport_pc             36959  1 
    lp                     17825  0 
    parport                46458  3 ppdev,parport_pc,lp
    firewire_ohci          40370  0 
    firewire_core          62646  1 firewire_ohci
    usbhid                 46956  0 
    hid                    91020  1 usbhid
    usb_storage            53538  0 
    uas                    17996  0 
    ahci                   25951  0 
    r8169                  48022  0 
    pata_atiixp            13165  0 
    crc_itu_t              12707  1 firewire_core
    libahci                26642  1 ahci
    pata_jmicron           12747  1 
    floppy                 74120  1 
    
    DMESG *************************************************
    
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.38-8-generic (builddATallspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=AC7AFE6C7AFE32A6 loop=/ubuntu/disks/root.disk ro quiet splash
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable)
    [    0.000000]  BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
    [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI 2.4 present.
    [    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-870A-UD3/GA-870A-UD3, BIOS F2 06/07/2010
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] No AGP bridge found
    [    0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-C7FFF write-protect
    [    0.000000]   C8000-FFFFF uncachable
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
    [    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
    [    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
    [    0.000000]   3 base 0000CFE00000 mask FFFFFFE00000 uncachable
    [    0.000000]   4 base 000100000000 mask FFFF00000000 write-back
    [    0.000000]   5 base 000200000000 mask FFFFE0000000 write-back
    [    0.000000]   6 base 000220000000 mask FFFFF0000000 write-back
    [    0.000000]   7 disabled
    [    0.000000] TOM2: 0000000230000000 aka 8960M
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
    [    0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
    [    0.000000] found SMP MP-table at [ffff8800000f4220] f4220
    [    0.000000] initial memory mapped : 0 - 20000000
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] init_memory_mapping: 0000000000000000-00000000cfdf0000
    [    0.000000]  0000000000 - 00c0000000 page 1G
    [    0.000000]  00c0000000 - 00cfc00000 page 2M
    [    0.000000]  00cfc00000 - 00cfdf0000 page 4k
    [    0.000000] kernel direct mapping tables up to cfdf0000 AT 1fffd000-20000000
    [    0.000000] init_memory_mapping: 0000000100000000-0000000230000000
    [    0.000000]  0100000000 - 0200000000 page 1G
    [    0.000000]  0200000000 - 0230000000 page 2M
    [    0.000000] kernel direct mapping tables up to 230000000 AT cfdee000-cfdf0000
    [    0.000000] RAMDISK: 366de000 - 37367000
    [    0.000000] ACPI: RSDP 00000000000f5c30 00014 (v00 GBT   )
    [    0.000000] ACPI: RSDT 00000000cfdf1000 00044 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: FACP 00000000cfdf1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: DSDT 00000000cfdf1100 07983 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
    [    0.000000] ACPI: FACS 00000000cfdf0000 00040
    [    0.000000] ACPI: SSDT 00000000cfdf8b80 00EDC (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
    [    0.000000] ACPI: HPET 00000000cfdf9a80 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
    [    0.000000] ACPI: MCFG 00000000cfdf9ac0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: MATS 00000000cfdf9b00 00034 (v01 GBT             00000000      00000000)
    [    0.000000] ACPI: TAMG 00000000cfdf9b70 0037A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
    [    0.000000] ACPI: APIC 00000000cfdf8ac0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    [    0.000000] ACPI: SLIC 00000000cfdf0050 00176 (v01 GBT    GBTUACPI 00000001 MSFT 000F4240)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] Scanning NUMA topology in Northbridge 24
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-0000000230000000
    [    0.000000] Initmem setup node 0 0000000000000000-0000000230000000
    [    0.000000]   NODE_DATA [000000022fffb000 - 000000022fffffff]
    [    0.000000]  [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227e00000-ffff88022effffff] on node 0
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   DMA32    0x00001000 -> 0x00100000
    [    0.000000]   Normal   0x00100000 -> 0x00230000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x000cfdf0
    [    0.000000]     0: 0x00100000 -> 0x00230000
    [    0.000000] On node 0 totalpages: 2096511
    [    0.000000]   DMA zone: 56 pages used for memmap
    [    0.000000]   DMA zone: 6 pages reserved
    [    0.000000]   DMA zone: 3921 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 14280 pages used for memmap
    [    0.000000]   DMA32 zone: 833064 pages, LIFO batch:31
    [    0.000000]   Normal zone: 17024 pages used for memmap
    [    0.000000]   Normal zone: 1228160 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x4008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [    0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000
    [    0.000000] PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000
    [    0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
    [    0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
    [    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [    0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 28 pages/cpu ATffff8800cfa00000 s84416 r8192 d22080 u262144
    [    0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2065145
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=AC7AFE6C7AFE32A6 loop=/ubuntu/disks/root.disk ro quiet splash
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Checking aperture...
    [    0.000000] No AGP bridge found
    [    0.000000] Node 0: aperture AT c4000000 size 32 MB
    [    0.000000] Aperture pointing to e820 RAM. Ignoring.
    [    0.000000] Your BIOS doesn't leave a aperture memory hole
    [    0.000000] Please enable the IOMMU option in the BIOS setup
    [    0.000000] This costs you 64 MB of RAM
    [    0.000000] Mapping aperture over 65536 KB of RAM AT c4000000
    [    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [    0.000000] Memory: 8110472k/9175040k available (5940k kernel code, 788996k absent, 275572k reserved, 5017k data, 956k init)
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] 	RCU-based detection of stalled CPUs is disabled.
    [    0.000000] NR_IRQS:16640 nr_irqs:744 16
    [    0.000000] spurious 8259A interrupt: IRQ7.
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] allocated 83886080 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2813.216 MHz processor.
    [    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.43 BogoMIPS (lpj=28132160)
    [    0.000007] pid_max: default: 32768 minimum: 301
    [    0.000025] Security Framework initialized
    [    0.000036] AppArmor: AppArmor initialized
    [    0.000038] Yama: becoming mindful.
    [    0.000580] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [    0.011714] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.012912] Mount-cache hash table entries: 256
    [    0.013017] Initializing cgroup subsys ns
    [    0.013020] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [    0.013022] Initializing cgroup subsys cpuacct
    [    0.013025] Initializing cgroup subsys memory
    [    0.013032] Initializing cgroup subsys devices
    [    0.013034] Initializing cgroup subsys freezer
    [    0.013035] Initializing cgroup subsys net_cls
    [    0.013037] Initializing cgroup subsys blkio
    [    0.013062] tseg: 00cff00000
    [    0.013063] CPU: Physical Processor ID: 0
    [    0.013064] CPU: Processor Core ID: 0
    [    0.013066] mce: CPU supports 6 MCE banks
    [    0.013073] using C1E aware idle routine
    [    0.014217] ACPI: Core revision 20110112
    [    0.020029] ftrace: allocating 24314 entries in 96 pages
    [    0.030072] Setting APIC routing to flat
    [    0.030448] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.133420] CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00
    [    0.140000] Performance Events: AMD PMU driver.
    [    0.140000] ... version:                0
    [    0.140000] ... bit width:              48
    [    0.140000] ... generic registers:      4
    [    0.140000] ... value mask:             0000ffffffffffff
    [    0.140000] ... max period:             00007fffffffffff
    [    0.140000] ... fixed-purpose events:   0
    [    0.140000] ... event mask:             000000000000000f
    [    0.140000] Booting Node   0, Processors  #1
    [    0.300013] System has AMD C1E enabled
    [    0.300027] Switch to broadcast mode on CPU1
    [    0.300051]  #2
    [    0.470016] Switch to broadcast mode on CPU2
    [    0.470057]  #3
    [    0.640030] Switch to broadcast mode on CPU3
    [    0.640078]  #4
    [    0.810018] Switch to broadcast mode on CPU4
    [    0.810084]  #5
    [    0.980035] Brought up 6 CPUs
    [    0.980040] Total of 6 processors activated (33755.64 BogoMIPS).
    [    0.980030] Switch to broadcast mode on CPU5
    [    0.983059] Switch to broadcast mode on CPU0
    [    0.983059] devtmpfs: initialized
    [    0.983059] print_constraints: dummy: 
    [    0.983059] Time: 20:51:33  Date: 09/06/11
    [    0.983059] NET: Registered protocol family 16
    [    0.983059] node 0 link 0: io port [7000, ffff]
    [    0.983059] TOM: 00000000d0000000 aka 3328M
    [    0.983059] Fam 10h mmconf [e0000000, e00fffff]
    [    0.983059] node 0 link 0: mmio [a0000, bffff]
    [    0.983059] node 0 link 0: mmio [d0000000, dfffffff]
    [    0.983059] node 0 link 0: mmio [f0000000, fe02ffff]
    [    0.983059] node 0 link 0: mmio [e0000000, e08fffff] ==> [e0100000, e08fffff]
    [    0.983059] TOM2: 0000000230000000 aka 8960M
    [    0.983059] bus: [00, 08] on node 0 link 0
    [    0.983059] bus: 00 index 0 [io  0x0000-0xffff]
    [    0.983059] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [    0.983059] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
    [    0.983059] bus: 00 index 3 [mem 0xe0900000-0xffffffff]
    [    0.983059] bus: 00 index 4 [mem 0xe0100000-0xe08fffff]
    [    0.983059] bus: 00 index 5 [mem 0x230000000-0xfcffffffff]
    [    0.983059] Extended Config Space enabled on 1 nodes
    [    0.983059] ACPI: bus type pci registered
    [    0.983059] Trying to unpack rootfs image as initramfs...
    [    0.983059] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.983059] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [    1.000228] PCI: Using configuration type 1 for base access
    [    1.000685] bio: create slab <bio-0> at 0
    [    1.000685] ACPI: EC: Look up EC in DSDT
    [    1.001651] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
    [    1.001653] 
    [    1.001657] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
    [    1.001659] 
    [    1.001682] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
    [    1.001684] 
    [    1.001687] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
    [    1.001689] 
    [    1.005310] ACPI Warning: Incorrect checksum in table [TAMG] - 0xC3, should be 0xC2 (20110112/tbutils-314)
    [    1.005430] ACPI: Interpreter enabled
    [    1.005433] ACPI: (supports S0 S3 S4 S5)
    [    1.005448] ACPI: Using IOAPIC for interrupt routing
    [    1.145146] Freeing initrd memory: 12836k freed
    [    1.331779] ACPI: No dock devices found.
    [    1.331781] HEST: Table not found.
    [    1.331783] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    1.331823] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    1.331893] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
    [    1.331895] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
    [    1.331896] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    1.331898] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [    1.331899] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
    [    1.331910] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
    [    1.331920] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [    1.331945] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [    1.331966] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [    1.331968] pci 0000:00:02.0: PME# disabled
    [    1.331983] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
    [    1.332002] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    [    1.332004] pci 0000:00:09.0: PME# disabled
    [    1.332014] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
    [    1.332033] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [    1.332035] pci 0000:00:0a.0: PME# disabled
    [    1.332056] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
    [    1.332071] pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
    [    1.332078] pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
    [    1.332084] pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
    [    1.332091] pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
    [    1.332098] pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
    [    1.332105] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [    1.332119] pci 0000:00:11.0: set SATA to AHCI mode
    [    1.332151] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [    1.332160] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [    1.332210] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [    1.332223] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
    [    1.332272] pci 0000:00:12.2: supports D1 D2
    [    1.332273] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [    1.332276] pci 0000:00:12.2: PME# disabled
    [    1.332291] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [    1.332300] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
    [    1.332351] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [    1.332364] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
    [    1.332413] pci 0000:00:13.2: supports D1 D2
    [    1.332414] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [    1.332417] pci 0000:00:13.2: PME# disabled
    [    1.332432] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [    1.332483] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
    [    1.332493] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
    [    1.332500] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
    [    1.332507] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
    [    1.332513] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
    [    1.332520] pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
    [    1.332549] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [    1.332564] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [    1.332604] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [    1.332607] pci 0000:00:14.2: PME# disabled
    [    1.332616] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [    1.332669] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [    1.332697] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
    [    1.332707] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
    [    1.332755] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
    [    1.332793] pci 0000:00:15.0: supports D1 D2
    [    1.332810] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
    [    1.332848] pci 0000:00:15.1: supports D1 D2
    [    1.332865] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
    [    1.332903] pci 0000:00:15.2: supports D1 D2
    [    1.332920] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
    [    1.332958] pci 0000:00:15.3: supports D1 D2
    [    1.332975] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
    [    1.332985] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
    [    1.333034] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
    [    1.333048] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
    [    1.333096] pci 0000:00:16.2: supports D1 D2
    [    1.333097] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [    1.333100] pci 0000:00:16.2: PME# disabled
    [    1.333114] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
    [    1.333126] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
    [    1.333136] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
    [    1.333146] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
    [    1.333158] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
    [    1.333198] pci 0000:01:00.0: [10de:1081] type 0 class 0x000300
    [    1.333207] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
    [    1.333216] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
    [    1.333225] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
    [    1.333232] pci 0000:01:00.0: reg 24: [io  0xef00-0xef7f]
    [    1.333238] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [    1.333276] pci 0000:01:00.1: [10de:0e09] type 0 class 0x000403
    [    1.333284] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
    [    1.350023] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [    1.350027] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
    [    1.350030] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
    [    1.350034] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    1.350069] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
    [    1.350084] pci 0000:02:00.0: reg 10: [mem 0xfd2fe000-0xfd2fffff 64bit]
    [    1.350139] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [    1.350143] pci 0000:02:00.0: PME# disabled
    [    1.370021] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    [    1.370025] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
    [    1.370028] pci 0000:00:09.0:   bridge window [mem 0xfd200000-0xfd2fffff]
    [    1.370031] pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [    1.370066] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
    [    1.370132] pci 0000:03:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff]
    [    1.370166] pci 0000:03:00.0: PME# supported from D3hot
    [    1.370170] pci 0000:03:00.0: PME# disabled
    [    1.370192] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
    [    1.370209] pci 0000:03:00.1: reg 10: [io  0xcf00-0xcf07]
    [    1.370220] pci 0000:03:00.1: reg 14: [io  0xce00-0xce03]
    [    1.370230] pci 0000:03:00.1: reg 18: [io  0xcd00-0xcd07]
    [    1.370240] pci 0000:03:00.1: reg 1c: [io  0xcc00-0xcc03]
    [    1.370250] pci 0000:03:00.1: reg 20: [io  0xcb00-0xcb0f]
    [    1.370301] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
    [    1.370311] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
    [    1.370314] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
    [    1.370316] pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
    [    1.370319] pci 0000:00:0a.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
    [    1.370345] pci 0000:04:06.0: [104c:9066] type 0 class 0x000280
    [    1.370362] pci 0000:04:06.0: reg 10: [mem 0xfdefc000-0xfdefdfff]
    [    1.370371] pci 0000:04:06.0: reg 14: [mem 0xfdec0000-0xfdedffff]
    [    1.370429] pci 0000:04:06.0: supports D1 D2
    [    1.370430] pci 0000:04:06.0: PME# supported from D0 D1 D2 D3hot
    [    1.370434] pci 0000:04:06.0: PME# disabled
    [    1.370459] pci 0000:04:08.0: [1131:7134] type 0 class 0x000480
    [    1.370476] pci 0000:04:08.0: reg 10: [mem 0xfdeff000-0xfdeff3ff]
    [    1.370542] pci 0000:04:08.0: supports D1 D2
    [    1.370564] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
    [    1.370582] pci 0000:04:0e.0: reg 10: [mem 0xfdefe000-0xfdefe7ff]
    [    1.370592] pci 0000:04:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
    [    1.370654] pci 0000:04:0e.0: supports D1 D2
    [    1.370656] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
    [    1.370659] pci 0000:04:0e.0: PME# disabled
    [    1.370685] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
    [    1.370688] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
    [    1.370691] pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
    [    1.370694] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
    [    1.370696] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    1.370698] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    1.370700] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    1.370701] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [    1.370703] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
    [    1.370750] pci 0000:05:00.0: [197b:2363] type 0 class 0x000101
    [    1.370828] pci 0000:05:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
    [    1.370866] pci 0000:05:00.0: PME# supported from D3hot
    [    1.370870] pci 0000:05:00.0: PME# disabled
    [    1.370895] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
    [    1.370916] pci 0000:05:00.1: reg 10: [io  0xaf00-0xaf07]
    [    1.370928] pci 0000:05:00.1: reg 14: [io  0xae00-0xae03]
    [    1.370940] pci 0000:05:00.1: reg 18: [io  0xad00-0xad07]
    [    1.370952] pci 0000:05:00.1: reg 1c: [io  0xac00-0xac03]
    [    1.370963] pci 0000:05:00.1: reg 20: [io  0xab00-0xab0f]
    [    1.371025] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
    [    1.371037] pci 0000:00:15.0: PCI bridge to [bus 05-05]
    [    1.371041] pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
    [    1.371043] pci 0000:00:15.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
    [    1.371048] pci 0000:00:15.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
    [    1.371095] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
    [    1.371109] pci 0000:06:00.0: reg 10: [io  0x9e00-0x9eff]
    [    1.371134] pci 0000:06:00.0: reg 18: [mem 0xfd8ff000-0xfd8fffff 64bit pref]
    [    1.371149] pci 0000:06:00.0: reg 20: [mem 0xfd8f8000-0xfd8fbfff 64bit pref]
    [    1.371160] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [    1.371193] pci 0000:06:00.0: supports D1 D2
    [    1.371195] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    1.371198] pci 0000:06:00.0: PME# disabled
    [    1.390024] pci 0000:00:15.1: PCI bridge to [bus 06-06]
    [    1.390030] pci 0000:00:15.1:   bridge window [io  0x9000-0x9fff]
    [    1.390033] pci 0000:00:15.1:   bridge window [mem 0xfd900000-0xfd9fffff]
    [    1.390037] pci 0000:00:15.1:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
    [    1.390075] pci 0000:00:15.2: PCI bridge to [bus 07-07]
    [    1.390079] pci 0000:00:15.2:   bridge window [io  0x8000-0x8fff]
    [    1.390082] pci 0000:00:15.2:   bridge window [mem 0xfd700000-0xfd7fffff]
    [    1.390086] pci 0000:00:15.2:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
    [    1.390122] pci 0000:00:15.3: PCI bridge to [bus 08-08]
    [    1.390126] pci 0000:00:15.3:   bridge window [io  0x7000-0x7fff]
    [    1.390129] pci 0000:00:15.3:   bridge window [mem 0xfd500000-0xfd5fffff]
    [    1.390133] pci 0000:00:15.3:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
    [    1.390155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    1.390353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [    1.390376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    [    1.390398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    [    1.390417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    [    1.390440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [    1.390487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [    1.390511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
    [    1.390528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [    1.390549]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    1.400819] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
    [    1.400845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
    [    1.400870] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
    [    1.400894] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
    [    1.400917] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
    [    1.400941] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
    [    1.400964] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
    [    1.400988] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
    [    1.401064] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    1.401068] vgaarb: loaded
    [    1.401174] SCSI subsystem initialized
    [    1.401194] libata version 3.00 loaded.
    [    1.401194] usbcore: registered new interface driver usbfs
    [    1.401194] usbcore: registered new interface driver hub
    [    1.401194] usbcore: registered new device driver usb
    [    1.401194] wmi: Mapper loaded
    [    1.401194] PCI: Using ACPI for IRQ routing
    [    1.401194] PCI: pci_cache_line_size set to 64 bytes
    [    1.401194] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [    1.401194] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
    [    1.401194] reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff 
    [    1.401194] NetLabel: Initializing
    [    1.401194] NetLabel:  domain hash size = 128
    [    1.401194] NetLabel:  protocols = UNLABELED CIPSOv4
    [    1.401194] NetLabel:  unlabeled traffic allowed by default
    [    1.401194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    1.401194] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [    1.402304] Switching to clocksource hpet
    [    1.406719] AppArmor: AppArmor Filesystem Enabled
    [    1.406735] pnp: PnP ACPI init
    [    1.406746] ACPI: bus type pnp registered
    [    1.406803] pnp 00:00: [bus 00-ff]
    [    1.406805] pnp 00:00: [io  0x0cf8-0x0cff]
    [    1.406807] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    1.406808] pnp 00:00: [io  0x0d00-0xffff window]
    [    1.406810] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    1.406811] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [    1.406813] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
    [    1.406844] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [    1.406851] pnp 00:01: [io  0x0010-0x001f]
    [    1.406852] pnp 00:01: [io  0x0022-0x003f]
    [    1.406853] pnp 00:01: [io  0x0044-0x005f]
    [    1.406854] pnp 00:01: [io  0x0062-0x0063]
    [    1.406856] pnp 00:01: [io  0x0065-0x006f]
    [    1.406857] pnp 00:01: [io  0x0074-0x007f]
    [    1.406860] pnp 00:01: [io  0x0091-0x0093]
    [    1.406861] pnp 00:01: [io  0x00a2-0x00bf]
    [    1.406863] pnp 00:01: [io  0x00e0-0x00ef]
    [    1.406864] pnp 00:01: [io  0x04d0-0x04d1]
    [    1.406865] pnp 00:01: [io  0x0220-0x0225]
    [    1.406866] pnp 00:01: [io  0x0290-0x0294]
    [    1.406910] system 00:01: [io  0x04d0-0x04d1] has been reserved
    [    1.406912] system 00:01: [io  0x0220-0x0225] has been reserved
    [    1.406914] system 00:01: [io  0x0290-0x0294] has been reserved
    [    1.406916] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    1.407018] Switched to NOHz mode on CPU #0
    [    1.406364] Switched to NOHz mode on CPU #1
    [    1.406368] Switched to NOHz mode on CPU #2
    [    1.406372] Switched to NOHz mode on CPU #3
    [    1.406376] Switched to NOHz mode on CPU #5
    [    1.406380] Switched to NOHz mode on CPU #4
    [    1.420426] pnp 00:02: [io  0x4100-0x411f]
    [    1.420429] pnp 00:02: [io  0x0228-0x022f]
    [    1.420430] pnp 00:02: [io  0x040b]
    [    1.420432] pnp 00:02: [io  0x04d6]
    [    1.420433] pnp 00:02: [io  0x0c00-0x0c01]
    [    1.420434] pnp 00:02: [io  0x0c14]
    [    1.420435] pnp 00:02: [io  0x0c50-0x0c52]
    [    1.420437] pnp 00:02: [io  0x0c6c-0x0c6d]
    [    1.420438] pnp 00:02: [io  0x0c6f]
    [    1.420439] pnp 00:02: [io  0x0cd0-0x0cd1]
    [    1.420441] pnp 00:02: [io  0x0cd2-0x0cd3]
    [    1.420443] pnp 00:02: [io  0x0cd4-0x0cdf]
    [    1.420444] pnp 00:02: [io  0x4000-0x40fe]
    [    1.420445] pnp 00:02: [io  0x4210-0x4217]
    [    1.420446] pnp 00:02: [io  0x0b00-0x0b0f]
    [    1.420448] pnp 00:02: [io  0x0b10-0x0b1f]
    [    1.420449] pnp 00:02: [io  0x0b20-0x0b3f]
    [    1.420451] pnp 00:02: [mem 0x00000000-0x00000fff window]
    [    1.420452] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
    [    1.420457] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    1.420486] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
    [    1.420501] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [    1.420530] system 00:02: [io  0x4100-0x411f] has been reserved
    [    1.420532] system 00:02: [io  0x0228-0x022f] has been reserved
    [    1.420534] system 00:02: [io  0x040b] has been reserved
    [    1.420536] system 00:02: [io  0x04d6] has been reserved
    [    1.420538] system 00:02: [io  0x0c00-0x0c01] has been reserved
    [    1.420540] system 00:02: [io  0x0c14] has been reserved
    [    1.420541] system 00:02: [io  0x0c50-0x0c52] has been reserved
    [    1.420543] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
    [    1.420545] system 00:02: [io  0x0c6f] has been reserved
    [    1.420547] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
    [    1.420549] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
    [    1.420555] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
    [    1.420557] system 00:02: [io  0x4000-0x40fe] has been reserved
    [    1.420559] system 00:02: [io  0x4210-0x4217] has been reserved
    [    1.420561] system 00:02: [io  0x0b00-0x0b0f] has been reserved
    [    1.420563] system 00:02: [io  0x0b10-0x0b1f] has been reserved
    [    1.420565] system 00:02: [io  0x0b20-0x0b3f] has been reserved
    [    1.420567] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
    [    1.420570] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    1.420646] pnp 00:03: [dma 4]
    [    1.420647] pnp 00:03: [io  0x0000-0x000f]
    [    1.420649] pnp 00:03: [io  0x0080-0x0090]
    [    1.420650] pnp 00:03: [io  0x0094-0x009f]
    [    1.420651] pnp 00:03: [io  0x00c0-0x00df]
    [    1.420669] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [    1.420698] pnp 00:04: [io  0x0070-0x0073]
    [    1.420707] pnp 00:04: [irq 8]
    [    1.420725] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    1.420730] pnp 00:05: [io  0x0061]
    [    1.420747] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [    1.420754] pnp 00:06: [io  0x00f0-0x00ff]
    [    1.420760] pnp 00:06: [irq 13]
    [    1.420779] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    1.420873] pnp 00:07: [io  0x03f0-0x03f5]
    [    1.420875] pnp 00:07: [io  0x03f7]
    [    1.420880] pnp 00:07: [irq 6]
    [    1.420881] pnp 00:07: [dma 2]
    [    1.420911] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [    1.421021] pnp 00:08: [io  0x03f8-0x03ff]
    [    1.421026] pnp 00:08: [irq 4]
    [    1.421061] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [    1.421179] pnp 00:09: [io  0x0378-0x037f]
    [    1.421185] pnp 00:09: [irq 7]
    [    1.421215] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [    1.421286] pnp 00:0a: [mem 0xe0000000-0xefffffff]
    [    1.421326] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
    [    1.421328] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    1.421410] pnp 00:0b: [mem 0x000cda00-0x000cffff]
    [    1.421412] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
    [    1.421413] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
    [    1.421414] pnp 00:0b: [mem 0x000fc000-0x000fffff]
    [    1.421416] pnp 00:0b: [mem 0xcfdf0000-0xcfdfffff]
    [    1.421417] pnp 00:0b: [mem 0xffff0000-0xffffffff]
    [    1.421418] pnp 00:0b: [mem 0x00000000-0x0009ffff]
    [    1.421420] pnp 00:0b: [mem 0x00100000-0xcfdeffff]
    [    1.421421] pnp 00:0b: [mem 0xcfe00000-0xcfefffff]
    [    1.421422] pnp 00:0b: [mem 0xcff00000-0xcfffffff]
    [    1.421424] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
    [    1.421425] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
    [    1.421426] pnp 00:0b: [mem 0xfff80000-0xfffeffff]
    [    1.421429] pnp 00:0b: disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    1.421432] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    1.421434] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    1.421437] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    1.421439] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    1.421442] pnp 00:0b: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [    1.421493] system 00:0b: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
    [    1.421495] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
    [    1.421497] system 00:0b: [mem 0xcfe00000-0xcfefffff] has been reserved
    [    1.421498] system 00:0b: [mem 0xcff00000-0xcfffffff] could not be reserved
    [    1.421500] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    1.421502] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
    [    1.421504] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
    [    1.421506] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    1.421520] pnp: PnP ACPI: found 12 devices
    [    1.421521] ACPI: ACPI bus type pnp unregistered
    [    1.427057] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd807ffff pref]
    [    1.427059] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [    1.427061] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
    [    1.427063] pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
    [    1.427066] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    1.427068] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    [    1.427070] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
    [    1.427072] pci 0000:00:09.0:   bridge window [mem 0xfd200000-0xfd2fffff]
    [    1.427074] pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [    1.427077] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
    [    1.427079] pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
    [    1.427081] pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
    [    1.427083] pci 0000:00:0a.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
    [    1.427086] pci 0000:00:14.4: PCI bridge to [bus 04-04]
    [    1.427088] pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
    [    1.427092] pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
    [    1.427095] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
    [    1.427100] pci 0000:00:15.0: PCI bridge to [bus 05-05]
    [    1.427101] pci 0000:00:15.0:   bridge window [io  0xa000-0xafff]
    [    1.427105] pci 0000:00:15.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
    [    1.427107] pci 0000:00:15.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
    [    1.427112] pci 0000:06:00.0: BAR 6: assigned [mem 0xfd800000-0xfd81ffff pref]
    [    1.427113] pci 0000:00:15.1: PCI bridge to [bus 06-06]
    [    1.427115] pci 0000:00:15.1:   bridge window [io  0x9000-0x9fff]
    [    1.427118] pci 0000:00:15.1:   bridge window [mem 0xfd900000-0xfd9fffff]
    [    1.427121] pci 0000:00:15.1:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
    [    1.427125] pci 0000:00:15.2: PCI bridge to [bus 07-07]
    [    1.427127] pci 0000:00:15.2:   bridge window [io  0x8000-0x8fff]
    [    1.427130] pci 0000:00:15.2:   bridge window [mem 0xfd700000-0xfd7fffff]
    [    1.427132] pci 0000:00:15.2:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
    [    1.427136] pci 0000:00:15.3: PCI bridge to [bus 08-08]
    [    1.427138] pci 0000:00:15.3:   bridge window [io  0x7000-0x7fff]
    [    1.427141] pci 0000:00:15.3:   bridge window [mem 0xfd500000-0xfd5fffff]
    [    1.427144] pci 0000:00:15.3:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
    [    1.427160] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.427163] pci 0000:00:02.0: setting latency timer to 64
    [    1.427171] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.427173] pci 0000:00:09.0: setting latency timer to 64
    [    1.427177] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.427179] pci 0000:00:0a.0: setting latency timer to 64
    [    1.427186] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.427188] pci 0000:00:15.0: setting latency timer to 64
    [    1.427192] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.427195] pci 0000:00:15.1: setting latency timer to 64
    [    1.427199] pci 0000:00:15.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.427201] pci 0000:00:15.2: setting latency timer to 64
    [    1.427205] pci 0000:00:15.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.427208] pci 0000:00:15.3: setting latency timer to 64
    [    1.427210] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    1.427212] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    1.427213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    1.427215] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [    1.427216] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
    [    1.427218] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
    [    1.427219] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
    [    1.427221] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    1.427222] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
    [    1.427224] pci_bus 0000:02: resource 1 [mem 0xfd200000-0xfd2fffff]
    [    1.427225] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [    1.427227] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
    [    1.427228] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [    1.427230] pci_bus 0000:03: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
    [    1.427231] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
    [    1.427233] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
    [    1.427234] pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff pref]
    [    1.427236] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
    [    1.427237] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
    [    1.427239] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [    1.427240] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
    [    1.427241] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]
    [    1.427243] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
    [    1.427244] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
    [    1.427246] pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
    [    1.427247] pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
    [    1.427249] pci_bus 0000:06: resource 1 [mem 0xfd900000-0xfd9fffff]
    [    1.427250] pci_bus 0000:06: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
    [    1.427252] pci_bus 0000:07: resource 0 [io  0x8000-0x8fff]
    [    1.427253] pci_bus 0000:07: resource 1 [mem 0xfd700000-0xfd7fffff]
    [    1.427255] pci_bus 0000:07: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
    [    1.427256] pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
    [    1.427258] pci_bus 0000:08: resource 1 [mem 0xfd500000-0xfd5fffff]
    [    1.427259] pci_bus 0000:08: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
    [    1.427284] NET: Registered protocol family 2
    [    1.427446] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    1.428606] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [    1.431151] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    1.431461] TCP: Hash tables configured (established 524288 bind 65536)
    [    1.431462] TCP reno registered
    [    1.431474] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [    1.431525] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [    1.431656] NET: Registered protocol family 1
    [    1.510181] pci 0000:01:00.0: Boot video device
    [    1.510236] PCI: CLS 64 bytes, default 64
    [    1.511976] PCI-DMA: Disabling AGP.
    [    1.512090] PCI-DMA: aperture base AT c4000000 size 65536 KB
    [    1.512091] PCI-DMA: using GART IOMMU.
    [    1.512094] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [    1.515505] audit: initializing netlink socket (disabled)
    [    1.515519] type=2000 audit(1315342292.510:1): initialized
    [    1.524483] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    1.525691] VFS: Disk quotas dquot_6.5.2
    [    1.525722] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    1.526171] fuse init (API version 7.16)
    [    1.526223] msgmni has been set to 15994
    [    1.526461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    1.526489] io scheduler noop registered
    [    1.526490] io scheduler deadline registered
    [    1.526516] io scheduler cfq registered (default)
    [    1.526652] pcieport 0000:00:02.0: setting latency timer to 64
    [    1.526681] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [    1.526770] pcieport 0000:00:09.0: setting latency timer to 64
    [    1.526788] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
    [    1.526859] pcieport 0000:00:0a.0: setting latency timer to 64
    [    1.526877] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
    [    1.527195] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    1.527211] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    1.527309] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    1.527313] ACPI: Power Button [PWRB]
    [    1.527352] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    1.527354] ACPI: Power Button [PWRF]
    [    1.527486] ACPI: acpi_idle registered with cpuidle
    [    1.527498] ACPI: processor limited to max C-state 1
    [    1.760676] ERST: Table is not found!
    [    1.760719] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    1.781225] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    2.010739] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    2.020258] Linux agpgart interface v0.103
    [    2.020933] brd: module loaded
    [    2.021227] loop: module loaded
    [    2.021280] i2c-core: driver [adp5520] using legacy suspend method
    [    2.021282] i2c-core: driver [adp5520] using legacy resume method
    [    2.021423] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    2.021526] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
    [    2.021538] pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    2.021555] pata_acpi 0000:03:00.1: setting latency timer to 64
    [    2.021563] pata_acpi 0000:03:00.1: PCI INT B disabled
    [    2.021611] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
    [    2.021615] pata_acpi 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    2.021630] pata_acpi 0000:05:00.1: setting latency timer to 64
    [    2.021638] pata_acpi 0000:05:00.1: PCI INT B disabled
    [    2.021970] Fixed MDIO Bus: probed
    [    2.021992] PPP generic driver version 2.4.2
    [    2.022026] tun: Universal TUN/TAP device driver, 1.6
    [    2.022028] tun: (C) 1999-2004 Max Krasnyansky <maxkATqualcomm.com>
    [    2.022102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.022181] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    2.022215] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [    2.022257] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [    2.070105] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    2.070108] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    2.070127] ehci_hcd 0000:00:12.2: debug port 1
    [    2.070150] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
    [    2.090089] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [    2.090182] hub 1-0:1.0: USB hub found
    [    2.090185] hub 1-0:1.0: 5 ports detected
    [    2.090332] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    2.090344] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [    2.090372] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [    2.120113] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    2.120116] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    2.120133] ehci_hcd 0000:00:13.2: debug port 1
    [    2.120143] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
    [    2.140085] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [    2.140169] hub 2-0:1.0: USB hub found
    [    2.140172] hub 2-0:1.0: 5 ports detected
    [    2.140325] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    2.140337] ehci_hcd 0000:00:16.2: EHCI Host Controller
    [    2.140365] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
    [    2.140396] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    2.140399] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    2.140415] ehci_hcd 0000:00:16.2: debug port 1
    [    2.140425] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
    [    2.160082] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [    2.160164] hub 3-0:1.0: USB hub found
    [    2.160167] hub 3-0:1.0: 4 ports detected
    [    2.160260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.160338] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    2.160350] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [    2.160377] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
    [    2.160424] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
    [    2.224156] hub 4-0:1.0: USB hub found
    [    2.224161] hub 4-0:1.0: 5 ports detected
    [    2.224322] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    2.224333] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [    2.224361] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [    2.224394] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
    [    2.284159] hub 5-0:1.0: USB hub found
    [    2.284164] hub 5-0:1.0: 5 ports detected
    [    2.284326] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    2.284337] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [    2.284365] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
    [    2.284398] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
    [    2.344163] hub 6-0:1.0: USB hub found
    [    2.344168] hub 6-0:1.0: 2 ports detected
    [    2.344326] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    2.344337] ohci_hcd 0000:00:16.0: OHCI Host Controller
    [    2.344363] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
    [    2.370120] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
    [    2.434168] hub 7-0:1.0: USB hub found
    [    2.434173] hub 7-0:1.0: 4 ports detected
    [    2.434261] uhci_hcd: USB Universal Host Controller Interface driver
    [    2.434324] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [    2.468327] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
    [    2.468329] i8042: If AUX port is really absent please use the 'i8042.noaux' option
    [    2.510086] Refined TSC clocksource calibration: 2812.904 MHz.
    [    2.510089] Switching to clocksource tsc
    [    2.660076] usb 1-3: new high speed USB device using ehci_hcd and address 4
    [    2.710158] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.710237] mousedev: PS/2 mouse device common for all mice
    [    2.710327] rtc_cmos 00:04: RTC can wake from S4
    [    2.710396] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [    2.710421] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [    2.710485] device-mapper: uevent: version 1.0.3
    [    2.710535] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-develATredhat.com
    [    2.710618] device-mapper: multipath: version 1.2.0 loaded
    [    2.710620] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    2.710697] cpuidle: using governor ladder
    [    2.710698] cpuidle: using governor menu
    [    2.710850] TCP cubic registered
    [    2.710919] NET: Registered protocol family 10
    [    2.711242] NET: Registered protocol family 17
    [    2.711253] Registering the dns_resolver key type
    [    2.711329] powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00)
    [    2.711337] powernow-k8: Core Performance Boosting: on.
    [    2.711363] powernow-k8:    0 : pstate 0 (2800 MHz)
    [    2.711364] powernow-k8:    1 : pstate 1 (2200 MHz)
    [    2.711366] powernow-k8:    2 : pstate 2 (1500 MHz)
    [    2.711367] powernow-k8:    3 : pstate 3 (800 MHz)
    [    2.711822] PM: Hibernation image not present or could not be loaded.
    [    2.711829] registered taskstats version 1
    [    2.712161]   Magic number: 11:928:901
    [    2.712268] rtc_cmos 00:04: setting system clock to 2011-09-06 20:51:35 UTC (1315342295)
    [    2.712270] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    2.712271] EDD information not available.
    [    2.713456] Freeing unused kernel memory: 956k freed
    [    2.713649] Write protecting the kernel read-only data: 10240k
    [    2.714311] Freeing unused kernel memory: 184k freed
    [    2.717764] Freeing unused kernel memory: 1444k freed
    [    2.732143] <30>udev[131]: starting version 167
    [    2.747620] Floppy drive(s): fd0 is 1.44M
    [    2.753284] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    2.753324] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [    2.754183] scsi0 : pata_jmicron
    [    2.755102] scsi1 : pata_jmicron
    [    2.755134] ata1: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 19
    [    2.755136] ata2: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 19
    [    2.755251] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    2.755280] pata_jmicron 0000:05:00.1: setting latency timer to 64
    [    2.757702] scsi2 : pata_jmicron
    [    2.758365] scsi3 : pata_jmicron
    [    2.758406] ata3: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
    [    2.758409] ata4: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
    [    2.759040] scsi4 : pata_atiixp
    [    2.759097] scsi5 : pata_atiixp
    [    2.759548] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
    [    2.759550] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
    [    2.761360] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [    2.761380] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    2.761417] r8169 0000:06:00.0: setting latency timer to 64
    [    2.761467] r8169 0000:06:00.0: irq 43 for MSI/MSI-X
    [    2.761856] r8169 0000:06:00.0: eth0: RTL8168d/8111d at 0xffffc900117a2000, 1c:6f:65:83:03:26, XID 083000c0 IRQ 43
    [    2.764549] FDC 0 is a post-1991 82077
    [    2.812833] ahci 0000:00:11.0: version 3.0
    [    2.812844] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    2.812886] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
    [    2.812953] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
    [    2.812956] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
    [    2.813450] scsi6 : ahci
    [    2.813511] scsi7 : ahci
    [    2.813564] scsi8 : ahci
    [    2.813617] scsi9 : ahci
    [    2.813706] ata7: SATA max UDMA/133 abar m1024AT0xfe02f000 port 0xfe02f100 irq 44
    [    2.813709] ata8: SATA max UDMA/133 abar m1024AT0xfe02f000 port 0xfe02f180 irq 44
    [    2.813712] ata9: SATA max UDMA/133 abar m1024AT0xfe02f000 port 0xfe02f200 irq 44
    [    2.813714] ata10: SATA max UDMA/133 abar m1024AT0xfe02f000 port 0xfe02f280 irq 44
    [    2.813784] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    2.830122] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [    2.830125] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
    [    2.830130] ahci 0000:03:00.0: setting latency timer to 64
    [    2.830396] scsi10 : ahci
    [    2.830453] scsi11 : ahci
    [    2.830489] ata11: SATA max UDMA/133 abar m8192AT0xfdcfe000 port 0xfdcfe100 irq 18
    [    2.830492] ata12: SATA max UDMA/133 abar m8192AT0xfdcfe000 port 0xfdcfe180 irq 18
    [    2.830575] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    2.844685] usbcore: registered new interface driver uas
    [    2.860125] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [    2.860128] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
    [    2.860133] ahci 0000:05:00.0: setting latency timer to 64
    [    2.860408] scsi12 : ahci
    [    2.860467] scsi13 : ahci
    [    2.860506] ata13: SATA max UDMA/133 abar m8192AT0xfdbfe000 port 0xfdbfe100 irq 17
    [    2.860509] ata14: SATA max UDMA/133 abar m8192AT0xfdbfe000 port 0xfdbfe180 irq 17
    [    3.030079] usb 2-5: new high speed USB device using ehci_hcd and address 3
    [    3.131631] ata3.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
    [    3.131634] ata3.00: 976773168 sectors, multi 16: LBA48 
    [    3.131640] ata3.01: ATAPI: SONY    CD-RW  CRX210E1, 2YS1, max UDMA/33
    [    3.160118] ata9: SATA link down (SStatus 0 SControl 300)
    [    3.171668] ata3.00: configured for UDMA/100
    [    3.187835] Initializing USB Mass Storage driver...
    [    3.187939] scsi14 : usb-storage 1-3:1.0
    [    3.188047] scsi15 : usb-storage 2-5:1.0
    [    3.188106] usbcore: registered new interface driver usb-storage
    [    3.188108] USB Mass Storage support registered.
    [    3.190110] ata12: SATA link down (SStatus 0 SControl 300)
    [    3.190139] ata11: SATA link down (SStatus 0 SControl 300)
    [    3.210625] ata3.01: configured for UDMA/33
    [    3.219175] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKB-0 05.0 PQ: 0 ANSI: 5
    [    3.219308] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [    3.219338] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [    3.220042] ata13: SATA link down (SStatus 0 SControl 300)
    [    3.220076] ata14: SATA link down (SStatus 0 SControl 300)
    [    3.226370] scsi 2:0:1:0: CD-ROM            SONY     CD-RW  CRX210E1  2YS1 PQ: 0 ANSI: 5
    [    3.226437] sd 2:0:0:0: [sda] Write Protect is off
    [    3.226440] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    3.249580] sr0: scsi3-mmc drive: 163x/40x writer cd/rw xa/form2 cdda tray
    [    3.249584] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    3.249588] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    3.249733] sr 2:0:1:0: Attached scsi CD-ROM sr0
    [    3.249786] sr 2:0:1:0: Attached scsi generic sg1 type 5
    [    3.263699]  sda: sda1
    [    3.340592] sd 2:0:0:0: [sda] Attached SCSI disk
    [    3.360060] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    3.360084] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    3.361523] ata7.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100
    [    3.363556] ata8.00: ATA-8: WDC WD15EURS-63S48Y0, 51.0AB51, max UDMA/133
    [    3.363558] ata8.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    3.366443] ata8.00: configured for UDMA/133
    [    3.370101] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    3.381839] ata10.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133
    [    3.381841] ata10.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    3.382639] ata10.00: configured for UDMA/133
    [    3.490090] usb 3-4: new high speed USB device using ehci_hcd and address 4
    [    3.970075] usb 4-1: new full speed USB device using ohci_hcd and address 2
    [    4.161200] hub 4-1:1.0: USB hub found
    [    4.162909] ata7.00: configured for UDMA/100
    [    4.163115] hub 4-1:1.0: 4 ports detected
    [    4.180800] scsi 14:0:0:0: Direct-Access     SanDisk  Cruzer           1.00 PQ: 0 ANSI: 2
    [    4.180908] scsi 15:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
    [    4.181536] scsi 15:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
    [    4.182158] scsi 15:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
    [    4.182783] scsi 15:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
    [    4.183143] sd 15:0:0:0: Attached scsi generic sg2 type 0
    [    4.183248] sd 15:0:0:1: Attached scsi generic sg3 type 0
    [    4.183348] sd 15:0:0:2: Attached scsi generic sg4 type 0
    [    4.183453] sd 15:0:0:3: Attached scsi generic sg5 type 0
    [    4.183634] sd 14:0:0:0: Attached scsi generic sg6 type 0
    [    4.184775] sd 14:0:0:0: [sdf] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB)
    [    4.185522] sd 14:0:0:0: [sdf] Write Protect is off
    [    4.185525] sd 14:0:0:0: [sdf] Mode Sense: 03 00 00 00
    [    4.186274] sd 14:0:0:0: [sdf] No Caching mode page present
    [    4.186276] sd 14:0:0:0: [sdf] Assuming drive cache: write through
    [    4.189031] sd 14:0:0:0: [sdf] No Caching mode page present
    [    4.189033] sd 14:0:0:0: [sdf] Assuming drive cache: write through
    [    4.189056] sd 15:0:0:0: [sdb] Attached SCSI removable disk
    [    4.189652] sd 15:0:0:1: [sdc] Attached SCSI removable disk
    [    4.189900]  sdf: sdf1
    [    4.190395] sd 15:0:0:2: [sdd] Attached SCSI removable disk
    [    4.191038] sd 15:0:0:3: [sde] Attached SCSI removable disk
    [    4.192402] sd 14:0:0:0: [sdf] No Caching mode page present
    [    4.192404] sd 14:0:0:0: [sdf] Assuming drive cache: write through
    [    4.192406] sd 14:0:0:0: [sdf] Attached SCSI removable disk
    [    4.480072] usb 4-2: new full speed USB device using ohci_hcd and address 3
    [    4.728212] input: Tempest Habu Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input2
    [    4.728287] generic-usb 0003:1532:0009.0001: input,hidraw0: USB HID v10.01 Mouse [Tempest Habu Mouse] on usb-0000:00:12.0-2/input0
    [    4.830157] input: Tempest Habu Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/input/input3
    [    4.830210] generic-usb 0003:1532:0009.0002: input,hidraw1: USB HID v10.01 Keyboard [Tempest Habu Mouse] on usb-0000:00:12.0-2/input1
    [    4.830220] usbcore: registered new interface driver usbhid
    [    4.830222] usbhid: USB HID core driver
    [    4.964634] scsi 6:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223C  SB04 PQ: 0 ANSI: 5
    [    4.968061] sr1: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
    [    4.968143] sr 6:0:0:0: Attached scsi CD-ROM sr1
    [    4.968204] sr 6:0:0:0: Attached scsi generic sg7 type 5
    [    4.968372] scsi 7:0:0:0: Direct-Access     ATA      WDC WD15EURS-63S 51.0 PQ: 0 ANSI: 5
    [    4.968489] sd 7:0:0:0: [sdg] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
    [    4.968492] sd 7:0:0:0: Attached scsi generic sg8 type 0
    [    4.968495] sd 7:0:0:0: [sdg] 4096-byte physical blocks
    [    4.968639] sd 7:0:0:0: [sdg] Write Protect is off
    [    4.968642] sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
    [    4.968644] scsi 9:0:0:0: Direct-Access     ATA      WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5
    [    4.968763] sd 9:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [    4.968765] sd 9:0:0:0: Attached scsi generic sg9 type 0
    [    4.968788] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    4.968890] sd 9:0:0:0: [sdh] Write Protect is off
    [    4.968892] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00
    [    4.968954] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    4.975193]  sdh: sdh1 < sdh5 >
    [    4.975467] sd 9:0:0:0: [sdh] Attached SCSI disk
    [    4.980098] usb 5-1: new low speed USB device using ohci_hcd and address 2
    [    5.037604]  sdg: sdg1 sdg2 sdg3 sdg4 < sdg5 sdg6 sdg7 >
    [    5.037982] sd 7:0:0:0: [sdg] Attached SCSI disk
    [    5.042966] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [    5.100172] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [    5.230185] input: Saitek Cyborg X as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4
    [    5.230251] generic-usb 0003:06A3:0836.0003: input,hidraw2: USB HID v1.11 Joystick [Saitek Cyborg X] on usb-0000:00:13.0-1/input0
    [    5.600141] firewire_core: created device fw0: GUID 00160730001c6f65, S400
    [    5.600156] usb 7-1: new low speed USB device using ohci_hcd and address 2
    [    5.906700] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
    [    6.220048] usb 7-3: new full speed USB device using ohci_hcd and address 3
    [    6.521170] usb 4-1.1: new low speed USB device using ohci_hcd and address 4
    [    6.710146] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input5
    [    6.710221] generic-usb 0003:046D:C226.0004: input,hidraw3: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:12.0-1.1/input0
    [    6.721308] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1.1/4-1.1:1.1/input/input6
    [    6.721422] generic-usb 0003:046D:C226.0005: input,hiddev0,hidraw4: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:12.0-1.1/input1
    [    6.961136] usb 4-1.3: new full speed USB device using ohci_hcd and address 5
    [    7.171157] usb 4-1.4: new full speed USB device using ohci_hcd and address 6
    [    7.320194] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input7
    [    7.320278] generic-usb 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:12.0-1.4/input0
    [   13.724164] <30>udev[478]: starting version 167
    [   13.737640] lp: driver loaded but no devices found
    [   13.744549] parport_pc 00:09: reported by Plug and Play ACPI
    [   13.744595] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [   13.779830] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [   13.779863] xhci_hcd 0000:02:00.0: setting latency timer to 64
    [   13.779866] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [   13.780018] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
    [   13.793971] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
    [   13.793974] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   13.794574] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [   13.794644] SP5100 TCO timer: mmio address 0xb8fe00 already in use
    [   13.805075] Linux video capture interface: v2.00
    [   13.806522] type=1400 audit(1315335106.584:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=659 comm="apparmor_parser"
    [   13.806805] type=1400 audit(1315335106.584:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=659 comm="apparmor_parser"
    [   13.806986] type=1400 audit(1315335106.584:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=659 comm="apparmor_parser"
    [   13.816178] IR NEC protocol handler initialized
    [   13.817377] [drm] Initialized drm 1.1.0 20060810
    [   13.820473] IR RC5(x) protocol handler initialized
    [   13.820695] lp0: using parport0 (interrupt-driven).
    [   13.821993] MCE: In-kernel MCE decoding enabled.
    [   13.824563] IR RC6 protocol handler initialized
    [   13.828881] IR JVC protocol handler initialized
    [   13.831904] IR Sony protocol handler initialized
    [   13.835055] EDAC MC: Ver: 2.1.0 Apr 11 2011
    [   13.835760] lirc_dev: IR Remote Control driver registered, major 249 
    [   13.836642] IR LIRC bridge handler initialized
    [   13.840232] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd2fe000
    [   13.840290] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
    [   13.840296] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
    [   13.840300] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
    [   13.840305] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
    [   13.840309] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
    [   13.840313] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
    [   13.840318] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
    [   13.843584] usb usb8: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
    [   13.843778] xHCI xhci_add_endpoint called for root hub
    [   13.843781] xHCI xhci_check_bandwidth called for root hub
    [   13.843839] hub 8-0:1.0: USB hub found
    [   13.843844] hub 8-0:1.0: 4 ports detected
    [   13.852231] Bluetooth: Core ver 2.15
    [   13.852260] NET: Registered protocol family 31
    [   13.852261] Bluetooth: HCI device and connection manager initialized
    [   13.852264] Bluetooth: HCI socket layer initialized
    [   13.853916] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [   13.860309] input: X10 WTI RF receiver as /devices/pci0000:00/0000:00:16.0/usb7/7-1/input/input8
    [   13.860383] usbcore: registered new interface driver btusb
    [   13.860452] usbcore: registered new interface driver ati_remote
    [   13.860455] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
    [   13.868125] usb 7-1: Weird data, len=1 ff 00 00 00 00 00 ...
    [   13.875051] saa7130/34: v4l2 driver version 0.2.16 loaded
    [   13.875671] saa7134 0000:04:08.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [   13.875679] saa7134[0]: found at 0000:04:08.0, rev: 1, irq: 22, latency: 32, mmio: 0xfdeff000
    [   13.875685] saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
    [   13.875712] saa7134[0]: board init: gpio is 0
    [   13.880908] EDAC amd64_edac: v3.3.0
    [   13.880958] EDAC amd64: DRAM ECC disabled.
    [   13.880974] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [   13.880975]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [   13.880976]  (Note that use of the override may cause unknown side effects.)
    [   13.907707] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [   13.907713] nouveau 0000:01:00.0: setting latency timer to 64
    [   13.918082] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c8080a1)
    [   13.920616] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    [   13.923801] gspca: v2.12.0 registered
    [   13.931803] gspca: probing 041e:4036
    [   13.960392] ppdev: user-space parallel port driver
    [   13.968995] cfg80211: Calling CRDA to update world regulatory domain
    [   14.009787] cfg80211: World regulatory domain updated:
    [   14.009790] cfg80211:     (start_freq - end_freq AT bandwidth), (max_antenna_gain, max_eirp)
    [   14.009793] cfg80211:     (2402000 KHz - 2472000 KHz AT 40000 KHz), (300 mBi, 2000 mBm)
    [   14.009795] cfg80211:     (2457000 KHz - 2482000 KHz AT 20000 KHz), (300 mBi, 2000 mBm)
    [   14.009797] cfg80211:     (2474000 KHz - 2494000 KHz AT 20000 KHz), (300 mBi, 2000 mBm)
    [   14.009799] cfg80211:     (5170000 KHz - 5250000 KHz AT 40000 KHz), (300 mBi, 2000 mBm)
    [   14.009801] cfg80211:     (5735000 KHz - 5835000 KHz AT 40000 KHz), (300 mBi, 2000 mBm)
    [   14.070055] [drm] nouveau 0000:01:00.0: ... appears to be valid
    [   14.070058] [drm] nouveau 0000:01:00.0: BIT BIOS found
    [   14.070061] [drm] nouveau 0000:01:00.0: Bios version 70.10.17.00
    [   14.070063] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
    [   14.070138] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
    [   14.070140] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    [   14.070142] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000000
    [   14.070144] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
    [   14.070146] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011380 00000000
    [   14.070148] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 08011382 00020030
    [   14.070149] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 02022362 00020010
    [   14.070152] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
    [   14.070154] [drm] nouveau 0000:01:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
    [   14.070156] [drm] nouveau 0000:01:00.0:   1: 0x00010130: type 0x30 idx 1 tag 0x51
    [   14.070158] [drm] nouveau 0000:01:00.0:   2: 0x00002261: type 0x61 idx 2 tag 0x08
    [   14.070162] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x69CF
    [   14.090667] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   14.094757] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x706F
    [   14.160077] saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9
    [   14.160084] saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00
    [   14.160089] saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160094] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160099] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160104] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160109] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160114] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160119] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160124] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160129] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160134] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160139] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160145] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160149] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.160154] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [   14.180050] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x84CC
    [   14.180054] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x84D6
    [   14.180134] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x874A
    [   14.180136] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x87AF
    [   14.200086] saa7134[0] Tuner type is 38
    [   14.201592] i2c-core: driver [tuner] using legacy suspend method
    [   14.201595] i2c-core: driver [tuner] using legacy resume method
    [   14.210062] [drm] nouveau 0000:01:00.0: 0x87AF: Condition still not met after 20ms, skipping following opcodes
    [   14.210074] [drm] nouveau 0000:01:00.0: voltage table 0x40 unknown
    [   14.219638] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219641] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219643] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219645] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219646] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219648] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219650] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219652] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219653] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219655] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219657] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219659] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219660] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219662] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219664] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219665] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219667] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219669] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219670] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219672] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219674] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219676] cfg80211: 2402000 KHz - 2472000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219677] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219679] cfg80211: 2457000 KHz - 2482000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219681] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219683] cfg80211: 2457000 KHz - 2482000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219684] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219686] cfg80211: 2474000 KHz - 2494000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219688] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219690] cfg80211: 5170000 KHz - 5250000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219691] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219693] cfg80211: 5170000 KHz - 5250000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219695] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219697] cfg80211: 5170000 KHz - 5250000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219698] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219700] cfg80211: 5170000 KHz - 5250000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219702] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219704] cfg80211: 5170000 KHz - 5250000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219705] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219707] cfg80211: 5170000 KHz - 5250000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219709] cfg80211: Disabling freq 5260 MHz
    [   14.219710] cfg80211: Disabling freq 5270 MHz
    [   14.219711] cfg80211: Disabling freq 5280 MHz
    [   14.219712] cfg80211: Disabling freq 5300 MHz
    [   14.219713] cfg80211: Disabling freq 5310 MHz
    [   14.219714] cfg80211: Disabling freq 5320 MHz
    [   14.219715] cfg80211: Disabling freq 5500 MHz
    [   14.219716] cfg80211: Disabling freq 5510 MHz
    [   14.219717] cfg80211: Disabling freq 5520 MHz
    [   14.219718] cfg80211: Disabling freq 5540 MHz
    [   14.219719] cfg80211: Disabling freq 5550 MHz
    [   14.219720] cfg80211: Disabling freq 5560 MHz
    [   14.219721] cfg80211: Disabling freq 5580 MHz
    [   14.219722] cfg80211: Disabling freq 5590 MHz
    [   14.219724] cfg80211: Disabling freq 5600 MHz
    [   14.219725] cfg80211: Disabling freq 5620 MHz
    [   14.219726] cfg80211: Disabling freq 5630 MHz
    [   14.219727] cfg80211: Disabling freq 5640 MHz
    [   14.219728] cfg80211: Disabling freq 5660 MHz
    [   14.219729] cfg80211: Disabling freq 5670 MHz
    [   14.219730] cfg80211: Disabling freq 5680 MHz
    [   14.219731] cfg80211: Disabling freq 5700 MHz
    [   14.219732] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219734] cfg80211: 5735000 KHz - 5835000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219736] cfg80211: Updating information on frequency 5755 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219738] cfg80211: 5735000 KHz - 5835000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219739] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219741] cfg80211: 5735000 KHz - 5835000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219743] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219745] cfg80211: 5735000 KHz - 5835000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219746] cfg80211: Updating information on frequency 5795 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219748] cfg80211: 5735000 KHz - 5835000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219749] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219751] cfg80211: 5735000 KHz - 5835000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219753] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
    [   14.219755] cfg80211: 5735000 KHz - 5835000 KHz AT  KHz), (300 mBi, 2000 mBm)
    [   14.219756] cfg80211: Disabling freq 5835 MHz
    [   14.219757] cfg80211: Disabling freq 5845 MHz
    [   14.219759] cfg80211: Disabling freq 5855 MHz
    [   14.219760] cfg80211: Disabling freq 5865 MHz
    [   14.224448] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   14.224895] Registered led device: rt2800usb-phy0::radio
    [   14.224910] Registered led device: rt2800usb-phy0::assoc
    [   14.224924] Registered led device: rt2800usb-phy0::quality
    [   14.225513] usbcore: registered new interface driver rt2800usb
    [   14.227708] hda_codec: ALC892: BIOS auto-probing.
    [   14.240021] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [   14.240126] tuner 0-0043: chip found AT 0x86 (saa7134[0])
    [   14.241697] tda9887 0-0043: creating new instance
    [   14.241699] tda9887 0-0043: tda988[5/6/7] found
    [   14.244876] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
    [   14.244879] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 270MHz shader 540MHz
    [   14.244882] [drm] nouveau 0000:01:00.0: 1: memory 405MHz core 810MHz shader 810MHz voltage 10mV
    [   14.244885] [drm] nouveau 0000:01:00.0: 3: memory 540MHz core 1464MHz shader 1464MHz voltage 20mV
    [   14.245051] [TTM] Zone  kernel: Available graphics memory: 4095922 kiB.
    [   14.245053] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
    [   14.245055] [TTM] Initializing pool allocator.
    [   14.245067] [drm] nouveau 0000:01:00.0: Detected 1280MiB VRAM
    [   14.258554] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    [   14.258563] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset, please report!
    [   14.258737] [drm] nouveau 0000:01:00.0: PGRAPH: unknown config: 3/4/4/4, 5
    [   14.260547] [drm] nouveau 0000:01:00.0: failed to load fuc409d
    [   14.265222] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [   14.265224] [drm] No driver support for vblank timestamp query.
    [   14.487015] [drm] nouveau 0000:01:00.0: allocated 1440x1024 fb: 0x30000000, bo ffff8801ed967400
    [   14.492755] Console: switching to colour frame buffer device 160x56
    [   14.495980] fb0: nouveaufb frame buffer device
    [   14.495982] drm: registered panic notifier
    [   14.495987] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    [   14.496127] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [   14.496130] hda_intel: Disable MSI for Nvidia chipset
    [   14.496160] HDA Intel 0000:01:00.1: setting latency timer to 64
    [   14.500017] All bytes are equal. It is not a TEA5767
    [   14.500085] tuner 0-0060: chip found AT 0xc0 (saa7134[0])
    [   14.520047] tuner-simple 0-0060: creating new instance
    [   14.520051] tuner-simple 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
    [   14.668964] Adding 262136k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262136k 
    [   14.680173] saa7134[0]: registered device video0 [v4l2]
    [   14.680203] saa7134[0]: registered device vbi0
    [   14.680227] saa7134[0]: registered device radio0
    [   14.683751] saa7134 ALSA driver for DMA sound loaded
    [   14.683776] saa7134[0]/alsa: saa7134[0] at 0xfdeff000 irq 22 registered as card -2
    [   14.690277] dvb_init() allocating 1 frontend
    [   14.699185] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
    [   14.819502] type=1400 audit(1315335107.594:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1126 comm="apparmor_parser"
    [   14.819669] type=1400 audit(1315335107.594:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1131 comm="apparmor_parser"
    [   14.819686] type=1400 audit(1315335107.594:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1127 comm="apparmor_parser"
    [   14.820029] type=1400 audit(1315335107.604:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1127 comm="apparmor_parser"
    [   14.820219] type=1400 audit(1315335107.604:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1127 comm="apparmor_parser"
    [   14.820270] type=1400 audit(1315335107.604:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1130 comm="apparmor_parser"
    [   14.820624] type=1400 audit(1315335107.604:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1130 comm="apparmor_parser"
    [   14.821242] tda10046: chip is not answering. Giving up.
    [   14.821321] saa7134[0]/dvb: frontend initialization failed
    [   14.897157] r8169 0000:06:00.0: eth0: link down
    [   14.898190] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.901811] Bluetooth: L2CAP ver 2.15
    [   14.901813] Bluetooth: L2CAP socket layer initialized
    [   14.901973] phy0 -> rt2x00lib_request_firmware: Error - Current firmware does not support detected chipset.
    [   14.908845] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   14.908848] Bluetooth: BNEP filters: protocol multicast
    [   14.912038] Bluetooth: SCO (Voice Link) ver 0.6
    [   14.912040] Bluetooth: SCO socket layer initialized
    [   14.954420] Bluetooth: RFCOMM TTY layer initialized
    [   14.954425] Bluetooth: RFCOMM socket layer initialized
    [   14.954427] Bluetooth: RFCOMM ver 1.11
    [   15.053684] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
    [   15.234175] zc3xx: probe 2wr ov vga 0x0000
    [   15.284175] zc3xx: probe sensor -> 0011
    [   15.284177] zc3xx: Find Sensor HV7131R
    [   15.288234] input: zc3xx as /devices/pci0000:00/0000:00:16.0/usb7/7-3/input/input10
    [   15.288341] gspca: video1 created
    [   15.288376] usbcore: registered new interface driver zc3xx
    [   18.062421] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
    [   18.410118] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [   18.410125] ata7.00: failed command: IDENTIFY PACKET DEVICE
    [   18.410131] ata7.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
    [   18.410132]          res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
    [   18.410134] ata7.00: status: { DRDY }
    [   18.410140] ata7: hard resetting link
    [   18.960087] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [   19.762512] ata7.00: configured for UDMA/100
    [   19.974251] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
    [   20.580087] ata7: EH complete
    [   51.920077] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [   51.920082] ata7.00: failed command: IDENTIFY PACKET DEVICE
    [   51.920086] ata7.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
    [   51.920087]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
    [   51.920089] ata7.00: status: { DRDY }
    [   51.920093] ata7: hard resetting link
    [   52.470068] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [   53.271905] ata7.00: configured for UDMA/100
    [   54.090099] ata7: EH complete
    [   54.153129] audit_printk_skb: 9 callbacks suppressed
    [   54.153131] type=1400 audit(1315335146.934:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1924 comm="apparmor_parser"
    [   54.153434] type=1400 audit(1315335146.934:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1924 comm="apparmor_parser"
    [   65.948925] end_request: I/O error, dev fd0, sector 0
    [   78.028549] end_request: I/O error, dev fd0, sector 0
    [   78.028562] Buffer I/O error on device fd0, logical block 0
    [   80.248472] usb 1-3: USB disconnect, address 4
    [   90.109217] end_request: I/O error, dev fd0, sector 0
    [   90.109229] Buffer I/O error on device fd0, logical block 0
    [  102.188820] end_request: I/O error, dev fd0, sector 0
    [  102.188832] Buffer I/O error on device fd0, logical block 0
    [  114.268409] end_request: I/O error, dev fd0, sector 0
    [  114.268420] Buffer I/O error on device fd0, logical block 0
    [  126.348997] end_request: I/O error, dev fd0, sector 0
    [  126.349007] Buffer I/O error on device fd0, logical block 0
    [  138.428577] end_request: I/O error, dev fd0, sector 0
    [  138.428588] Buffer I/O error on device fd0, logical block 0
    [  150.509178] end_request: I/O error, dev fd0, sector 0
    [  150.509189] Buffer I/O error on device fd0, logical block 0
    [  162.588806] end_request: I/O error, dev fd0, sector 0
    [  162.588816] Buffer I/O error on device fd0, logical block 0
    [  174.669377] end_request: I/O error, dev fd0, sector 0
    [  174.669387] Buffer I/O error on device fd0, logical block 0
    [  186.748939] end_request: I/O error, dev fd0, sector 0
    [  186.748948] Buffer I/O error on device fd0, logical block 0
    [  198.828523] end_request: I/O error, dev fd0, sector 0
    [  198.828533] Buffer I/O error on device fd0, logical block 0
    [  210.909123] end_request: I/O error, dev fd0, sector 0
    [  210.909134] Buffer I/O error on device fd0, logical block 0
    [  222.988734] end_request: I/O error, dev fd0, sector 0
    [  222.988744] Buffer I/O error on device fd0, logical block 0
    [  235.069321] end_request: I/O error, dev fd0, sector 0
    [  235.069331] Buffer I/O error on device fd0, logical block 0
    [  247.148878] end_request: I/O error, dev fd0, sector 0
    [  247.148888] Buffer I/O error on device fd0, logical block 0
    [  259.228445] end_request: I/O error, dev fd0, sector 0
    [  259.228455] Buffer I/O error on device fd0, logical block 0
    [  271.309040] end_request: I/O error, dev fd0, sector 0
    [  271.309050] Buffer I/O error on device fd0, logical block 0
    [  283.388653] end_request: I/O error, dev fd0, sector 0
    [  283.388663] Buffer I/O error on device fd0, logical block 0
    [  295.469257] end_request: I/O error, dev fd0, sector 0
    [  295.469267] Buffer I/O error on device fd0, logical block 0
    [  304.010099] usb 1-4: new high speed USB device using ehci_hcd and address 5
    [  304.163125] scsi16 : usb-storage 1-4:1.0
    [  305.161052] scsi 16:0:0:0: Direct-Access     SanDisk  Cruzer           1.00 PQ: 0 ANSI: 2
    [  305.162258] sd 16:0:0:0: Attached scsi generic sg6 type 0
    [  305.163794] sd 16:0:0:0: [sdf] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB)
    [  305.165181] sd 16:0:0:0: [sdf] Write Protect is off
    [  305.165191] sd 16:0:0:0: [sdf] Mode Sense: 03 00 00 00
    [  305.166223] sd 16:0:0:0: [sdf] No Caching mode page present
    [  305.166233] sd 16:0:0:0: [sdf] Assuming drive cache: write through
    [  305.170285] sd 16:0:0:0: [sdf] No Caching mode page present
    [  305.170295] sd 16:0:0:0: [sdf] Assuming drive cache: write through
    [  305.174073]  sdf: sdf1
    [  305.177518] sd 16:0:0:0: [sdf] No Caching mode page present
    [  305.177527] sd 16:0:0:0: [sdf] Assuming drive cache: write through
    [  305.177534] sd 16:0:0:0: [sdf] Attached SCSI removable disk
    [  307.548866] end_request: I/O error, dev fd0, sector 0
    [  307.548878] Buffer I/O error on device fd0, logical block 0
    [  319.628425] end_request: I/O error, dev fd0, sector 0
    [  319.628437] Buffer I/O error on device fd0, logical block 0
    [  331.709057] end_request: I/O error, dev fd0, sector 0
    [  331.709069] Buffer I/O error on device fd0, logical block 0
    [  343.788620] end_request: I/O error, dev fd0, sector 0
    [  343.788632] Buffer I/O error on device fd0, logical block 0
    [  355.869254] end_request: I/O error, dev fd0, sector 0
    [  355.869266] Buffer I/O error on device fd0, logical block 0
    [  367.948901] end_request: I/O error, dev fd0, sector 0
    [  380.038657] end_request: I/O error, dev fd0, sector 0
    [  380.038669] Buffer I/O error on device fd0, logical block 0
    [  392.119265] end_request: I/O error, dev fd0, sector 0
    [  392.119276] Buffer I/O error on device fd0, logical block 0
    [  404.198818] end_request: I/O error, dev fd0, sector 0
    [  404.198829] Buffer I/O error on device fd0, logical block 0
    [  416.278436] end_request: I/O error, dev fd0, sector 0
    [  416.278448] Buffer I/O error on device fd0, logical block 0
    [  428.359050] end_request: I/O error, dev fd0, sector 0
    [  428.359063] Buffer I/O error on device fd0, logical block 0
    [  440.438618] end_request: I/O error, dev fd0, sector 0
    [  440.438630] Buffer I/O error on device fd0, logical block 0
    [  452.519210] end_request: I/O error, dev fd0, sector 0
    [  452.519221] Buffer I/O error on device fd0, logical block 0
    [  464.598795] end_request: I/O error, dev fd0, sector 0
    [  464.598807] Buffer I/O error on device fd0, logical block 0
    [  476.678393] end_request: I/O error, dev fd0, sector 0
    [  476.678404] Buffer I/O error on device fd0, logical block 0
    [  488.759020] end_request: I/O error, dev fd0, sector 0
    [  488.759032] Buffer I/O error on device fd0, logical block 0
    [  500.838708] end_request: I/O error, dev fd0, sector 0
    [  500.838720] Buffer I/O error on device fd0, logical block 0
    [  512.919250] end_request: I/O error, dev fd0, sector 0
    [  512.919262] Buffer I/O error on device fd0, logical block 0
    [  524.998896] end_request: I/O error, dev fd0, sector 0
    [  524.998909] Buffer I/O error on device fd0, logical block 0
    [  537.078497] end_request: I/O error, dev fd0, sector 0
    [  537.078510] Buffer I/O error on device fd0, logical block 0
    [  549.159216] end_request: I/O error, dev fd0, sector 0
    [  549.159228] Buffer I/O error on device fd0, logical block 0
    [  561.238754] end_request: I/O error, dev fd0, sector 0
    [  561.238765] Buffer I/O error on device fd0, logical block 0
    [  573.319370] end_request: I/O error, dev fd0, sector 0
    [  573.319382] Buffer I/O error on device fd0, logical block 0
    [  585.398967] end_request: I/O error, dev fd0, sector 0
    [  585.398977] Buffer I/O error on device fd0, logical block 0
    [  597.478559] end_request: I/O error, dev fd0, sector 0
    [  597.478570] Buffer I/O error on device fd0, logical block 0
    [  609.559148] end_request: I/O error, dev fd0, sector 0
    [  609.559160] Buffer I/O error on device fd0, logical block 0
    [  621.638754] end_request: I/O error, dev fd0, sector 0
    [  621.638765] Buffer I/O error on device fd0, logical block 0
    [  633.719353] end_request: I/O error, dev fd0, sector 0
    [  633.719364] Buffer I/O error on device fd0, logical block 0
    [  645.798925] end_request: I/O error, dev fd0, sector 0
    [  645.798936] Buffer I/O error on device fd0, logical block 0
    [  657.878554] end_request: I/O error, dev fd0, sector 0
    [  657.878567] Buffer I/O error on device fd0, logical block 0
    [  669.959179] end_request: I/O error, dev fd0, sector 0
    [  669.959189] Buffer I/O error on device fd0, logical block 0
    [  682.038786] end_request: I/O error, dev fd0, sector 0
    [  682.038796] Buffer I/O error on device fd0, logical block 0
    [  694.119347] end_request: I/O error, dev fd0, sector 0
    [  694.119357] Buffer I/O error on device fd0, logical block 0
    [  706.198928] end_request: I/O error, dev fd0, sector 0
    [  706.198940] Buffer I/O error on device fd0, logical block 0
    [  718.278526] end_request: I/O error, dev fd0, sector 0
    [  718.278538] Buffer I/O error on device fd0, logical block 0
    [  730.359157] end_request: I/O error, dev fd0, sector 0
    [  730.359168] Buffer I/O error on device fd0, logical block 0
    [  742.438713] end_request: I/O error, dev fd0, sector 0
    [  742.438723] Buffer I/O error on device fd0, logical block 0
    [  754.519290] end_request: I/O error, dev fd0, sector 0
    [  754.519301] Buffer I/O error on device fd0, logical block 0
    [  766.598859] end_request: I/O error, dev fd0, sector 0
    [  766.598869] Buffer I/O error on device fd0, logical block 0
    [  778.678402] end_request: I/O error, dev fd0, sector 0
    [  778.678414] Buffer I/O error on device fd0, logical block 0
    [  790.758998] end_request: I/O error, dev fd0, sector 0
    [  790.759009] Buffer I/O error on device fd0, logical block 0
    [  802.838579] end_request: I/O error, dev fd0, sector 0
    [  802.838590] Buffer I/O error on device fd0, logical block 0
    [  805.610710] usb 1-4: USB disconnect, address 5
    [  814.919190] end_request: I/O error, dev fd0, sector 0
    [  814.919202] Buffer I/O error on device fd0, logical block 0
    [  819.410112] usb 1-3: new high speed USB device using ehci_hcd and address 6
    [  819.562317] scsi17 : usb-storage 1-3:1.0
    [  820.561042] scsi 17:0:0:0: Direct-Access     SanDisk  Cruzer           1.00 PQ: 0 ANSI: 2
    [  820.562263] sd 17:0:0:0: Attached scsi generic sg6 type 0
    [  820.563781] sd 17:0:0:0: [sdf] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB)
    [  820.565160] sd 17:0:0:0: [sdf] Write Protect is off
    [  820.565170] sd 17:0:0:0: [sdf] Mode Sense: 03 00 00 00
    [  820.566220] sd 17:0:0:0: [sdf] No Caching mode page present
    [  820.566230] sd 17:0:0:0: [sdf] Assuming drive cache: write through
    [  820.570059] sd 17:0:0:0: [sdf] No Caching mode page present
    [  820.570069] sd 17:0:0:0: [sdf] Assuming drive cache: write through
    [  820.573806]  sdf: sdf1
    [  820.577257] sd 17:0:0:0: [sdf] No Caching mode page present
    [  820.577266] sd 17:0:0:0: [sdf] Assuming drive cache: write through
    [  820.577273] sd 17:0:0:0: [sdf] Attached SCSI removable disk
    [  826.998747] end_request: I/O error, dev fd0, sector 0
    [  826.998759] Buffer I/O error on device fd0, logical block 0
    [  839.079342] end_request: I/O error, dev fd0, sector 0
    [  839.079353] Buffer I/O error on device fd0, logical block 0
    [  851.158914] end_request: I/O error, dev fd0, sector 0
    [  851.158924] Buffer I/O error on device fd0, logical block 0
    [  863.238497] end_request: I/O error, dev fd0, sector 0
    [  863.238507] Buffer I/O error on device fd0, logical block 0
    [  875.319063] end_request: I/O error, dev fd0, sector 0
    [  875.319075] Buffer I/O error on device fd0, logical block 0
    [  887.398708] end_request: I/O error, dev fd0, sector 0
    [  887.398720] Buffer I/O error on device fd0, logical block 0
    [  899.478413] end_request: I/O error, dev fd0, sector 0
    [  899.478425] Buffer I/O error on device fd0, logical block 0
    [  911.559008] end_request: I/O error, dev fd0, sector 0
    [  911.559021] Buffer I/O error on device fd0, logical block 0
    [  923.638637] end_request: I/O error, dev fd0, sector 0
    [  923.638649] Buffer I/O error on device fd0, logical block 0
    [  935.719287] end_request: I/O error, dev fd0, sector 0
    [  935.719300] Buffer I/O error on device fd0, logical block 0
    [  947.798774] end_request: I/O error, dev fd0, sector 0
    [  947.798786] Buffer I/O error on device fd0, logical block 0
    [  959.879354] end_request: I/O error, dev fd0, sector 0
    [  959.879366] Buffer I/O error on device fd0, logical block 0
    [  971.958939] end_request: I/O error, dev fd0, sector 0
    [  971.958950] Buffer I/O error on device fd0, logical block 0
    [  984.038535] end_request: I/O error, dev fd0, sector 0
    [  984.038545] Buffer I/O error on device fd0, logical block 0
    [  996.119142] end_request: I/O error, dev fd0, sector 0
    [  996.119153] Buffer I/O error on device fd0, logical block 0
    [ 1008.198720] end_request: I/O error, dev fd0, sector 0
    [ 1008.198731] Buffer I/O error on device fd0, logical block 0
    [ 1020.279299] end_request: I/O error, dev fd0, sector 0
    [ 1020.279309] Buffer I/O error on device fd0, logical block 0
    [ 1032.358875] end_request: I/O error, dev fd0, sector 0
    [ 1032.358885] Buffer I/O error on device fd0, logical block 0
    [ 1044.438726] end_request: I/O error, dev fd0, sector 0
    [ 1056.529065] end_request: I/O error, dev fd0, sector 0
    [ 1068.618994] end_request: I/O error, dev fd0, sector 0
    [ 1068.619006] Buffer I/O error on device fd0, logical block 0
    [ 1080.728689] end_request: I/O error, dev fd0, sector 0
    [ 1080.728701] Buffer I/O error on device fd0, logical block 0
    [ 1092.809336] end_request: I/O error, dev fd0, sector 0
    [ 1092.809348] Buffer I/O error on device fd0, logical block 0
    [ 1104.888981] end_request: I/O error, dev fd0, sector 0
    [ 1104.888994] Buffer I/O error on device fd0, logical block 0
    [ 1116.968589] end_request: I/O error, dev fd0, sector 0
    [ 1116.968601] Buffer I/O error on device fd0, logical block 0
    [ 1129.049264] end_request: I/O error, dev fd0, sector 0
    [ 1129.049277] Buffer I/O error on device fd0, logical block 0
    [ 1141.129451] end_request: I/O error, dev fd0, sector 0
    [ 1141.129464] Buffer I/O error on device fd0, logical block 0
    [ 1153.209171] end_request: I/O error, dev fd0, sector 0
    [ 1153.209183] Buffer I/O error on device fd0, logical block 0
    [ 1165.288782] end_request: I/O error, dev fd0, sector 0
    [ 1165.288794] Buffer I/O error on device fd0, logical block 0
    [ 1177.368382] end_request: I/O error, dev fd0, sector 0
    [ 1177.368394] Buffer I/O error on device fd0, logical block 0
    [ 1189.449006] end_request: I/O error, dev fd0, sector 0
    [ 1189.449019] Buffer I/O error on device fd0, logical block 0
    [ 1201.528577] end_request: I/O error, dev fd0, sector 0
    [ 1201.528589] Buffer I/O error on device fd0, logical block 0
    
    
    DMESG | GREP FIRMWARE ****************************************
    
    [   14.901973] phy0 -> rt2x00lib_request_firmware: Error - Current firmware does not support detected chipset.

  2. #2
    Linux Engineer MASONTX's Avatar
    Join Date
    May 2010
    Location
    Mason Texas
    Posts
    934
    I believe the distro you are referring to is Ultimate. have you tried clicking on the wireless symbol at the top of the screen and setting up your wireless? I'm not at my Ubuntu machine at the moment, but go to the top bar, third column to the right, click on that then the first entry, and look for wireless setup. Sorry, I don't remember the names of the entries, but that will get you to the right area.
    Registered Linux user #526930

  3. #3
    Just Joined!
    Join Date
    Sep 2011
    Posts
    4
    Quote Originally Posted by MASONTX View Post
    I believe the distro you are referring to is Ultimate. have you tried clicking on the wireless symbol at the top of the screen and setting up your wireless? I'm not at my Ubuntu machine at the moment, but go to the top bar, third column to the right, click on that then the first entry, and look for wireless setup. Sorry, I don't remember the names of the entries, but that will get you to the right area.

    yes, i have but the problem is my firmware i believe. It would be allot easier if i could c a list of available access points so i would diagnose my network card/usb works and i can move on to the next solution. I have tried installing the network cards individually with no success. If that is the problem plz tell me exactly what files i need. It is impossible for me to connect wired so everything needs to be wireless.

  4. #4
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    What version of Ubuntu are you using?
    How did you go about trying to install your firmware? And did you get any errors?
    There should be an entry in your System tools labeled Hardware Drivers or something similar.
    Selecting this should make your system find and install any needed drivers.

    Start here: http://www.linuxforums.org/forum/wir...tart-here.html
    Post back all of the information requested.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  5. #5
    Just Joined!
    Join Date
    Sep 2011
    Posts
    4
    version is uNAME 2.6.38-8-generec but i have already added the needed info in my post.
    Yes i did get errors, i followed i few tutorials for both adapters however both were a no go. Errors were not implemented in those tutorials so every time i got one it ended there. I did not make a copy of those but i am willing to try again if you put me on the right track. I will try Hardware drivers in system tools and return with the outcome before i shoot myself in the face.

  6. #6
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    Actually, there is no info for lsusb in your post, but there were 2 entries for lspci.
    Also, I didn't see anything for ifconfig or iwconfig.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  7. #7
    Just Joined!
    Join Date
    Sep 2011
    Posts
    4
    wups sry, here is the info:


    Code:
    IFCONFIG *********************************************
    
    eth0      Link encap:Ethernet  HWaddr 1c:6f:65:83:03:26  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
              Interrupt:44 Base address:0xc000 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:96 errors:0 dropped:0 overruns:0 frame:0
              TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:7040 (7.0 KB)  TX bytes:7040 (7.0 KB)
    
    lsusb ************************************************
    
    Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 007 Device 003: ID 041e:4036 Creative Technology, Ltd Webcam Live!/Live! Pro
    Bus 007 Device 002: ID 0bc7:0006 X10 Wireless Technology, Inc. Wireless Transceiver (ACPI-compliant)
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 002: ID 06a3:0836 Saitek PLC 
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 006: ID 046d:c227 Logitech, Inc. G15 Refresh Keyboard
    Bus 004 Device 005: ID 0c10:0000  
    Bus 004 Device 004: ID 046d:c226 Logitech, Inc. G15 Refresh Keyboard
    Bus 004 Device 003: ID 1532:0009 Razer USA, Ltd 
    Bus 004 Device 002: ID 046d:c223 Logitech, Inc. G11/G15 Keyboard / USB Hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 004: ID 1737:0079 Linksys WUSB600N Wireless-N USB Network Adapter with Dual-Band ver. 2
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 006: ID 0781:5530 SanDisk Corp. 
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    
    
    IWCONFIG *********************************************
    
    lo        no wireless extensions.
    
    eth0      no wireless extensions.
    
    wlan0     IEEE 802.11abgn  ESSID:off/any  
              Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Power Management:on

    ty
    Last edited by zworba; 09-08-2011 at 06:42 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •