Linux NOOB New install can't connect to the internet :(

**Kodocha** · 12-05-2011

Hi all,

Ok I just Installed Debian GNU Linux i386 on a 3GHz (intel iirc) desktop that I have. I didn't set it up myself and it's been several years since I've used it so I really don't know/remember all the details.

Fresh install linux is the only OS.

When I was installing, it asked me to set up a network something to do with DHCP and it failed but I figured I didn't need a Network to install it as i was installing from DVD so I skipped it. Well after a day or 2 of trial and error (formatting an HDD takes a while) I got it all installed and working. Now there is the little 2 computers Ikon in the upper right that I use to connect to the Internet on my Debian/TAILS flashdrive so I figured use that to connect to the internet the same as I would with the flashdrive OS but it doesn't see my network. So I MANUALLY typed in the name of the network and the password and hit connect but it just pops up a message saying disconnected.

Is the skipped DHCP thing in the install related to why I can't connect? if so how do I fix it.

and/or/in general... How do I teach this thing to see the internet???

Please know I am a Linux UBERNOOB! and know next to nothing about it and have only JUST started reading the manuals. Also I really never was too good with the networking alphabet soup... I really mostly did video editing... so I really need this Dumbed down as much as possible.

Thanx in advance

Cheers
KODO

**jayd512** · 12-05-2011

Hi there.

Take a look at this page.
Run the commands, or you can use the script in Post #2 (instructions included).
Post back with the requested information, and someone should be able to get you going.

**Kodocha** · 12-05-2011

Ok lets try this again I AM AN UBERNOOB!!!

How exactly do I run those commands and or script thingy... I found that message the first time I looked to try to solve the problem but I don't understand what it's asking me to do. And I don't know HOW to do what it's asking. I CAN be taught... just please expect at this point that I don't know how to or barely know how to do even the most BASIC things in this OS.

**yancek** · 12-05-2011

You need to open a "terminal" or "konsole". I've never used Debian but you will just have to check whatever menu you have to find it. If you are using the gnome Desktop, there should be an Applications tab. If not, there should be a menu in the lower left of your Desktop. When you find the terminal, just type the commands in from the page jayd112 linked to and post the output here.

**Kodocha** · 12-05-2011

Thanx yancek... terminal...right I do know where that is. I'm assuming that I just type everything in as displayed... will just type in results from there to here since I don't know how to tell WIN to not make my notepad file a txt file so i really need to not mess with script thingys... that and I don't know how to put a file in my home directory yet...

HOLY CRAP!!! that's too much to type... copy paste FTW... good thing i know how to tell WIN to "open with"

here goes

lspci -knn gave me this info

Code:

00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8157]
	Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02)
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
	Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
	Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
	Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
	Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6]
	Kernel driver in use: ata_piix
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8227]
	Kernel driver in use: Intel ICH
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01)
	Subsystem: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960]
	Kernel driver in use: radeon
01:00.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)
	Subsystem: ATI Technologies Inc Device [1002:5961]
02:0a.0 Network controller [0280]: RaLink RT2561/RT61 802.11g PCI [1814:0301]
	Subsystem: Linksys WMP54G ver 4.1 [1737:0055]
	Kernel driver in use: rt61pci
02:0d.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
	Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
	Kernel driver in use: skge

lsmod command gave me this info

Code:

Module                  Size  Used by
acpi_cpufreq            4951  0 
cpufreq_conservative     4018  0 
cpufreq_userspace       1480  0 
cpufreq_powersave        602  0 
cpufreq_stats           1997  0 
ppdev                   4058  0 
lp                      5570  0 
sco                     5885  2 
bridge                 33031  0 
stp                      996  1 bridge
bnep                    7452  2 
rfcomm                 25199  0 
l2cap                  21721  4 bnep,rfcomm
crc16                   1027  1 l2cap
bluetooth              36319  6 sco,bnep,rfcomm,l2cap
binfmt_misc             4907  1 
fuse                   44268  1 
ext2                   46245  1 
loop                    9769  0 
arc4                     974  2 
ecb                     1405  2 
rt61pci                15716  0 
crc_itu_t               1035  1 rt61pci
rt2x00pci               3773  1 rt61pci
snd_intel8x0           19595  1 
rt2x00lib              19101  2 rt61pci,rt2x00pci
snd_ac97_codec         79200  1 snd_intel8x0
radeon                511948  2 
ac97_bus                 710  1 snd_ac97_codec
ttm                    33502  1 radeon
led_class               1757  1 rt2x00lib
snd_pcm                47226  2 snd_intel8x0,snd_ac97_codec
mac80211              123586  2 rt2x00pci,rt2x00lib
drm_kms_helper         18569  1 radeon
snd_seq                35463  0 
snd_timer              12270  2 snd_pcm,snd_seq
cfg80211               87637  2 rt2x00lib,mac80211
drm                   111992  4 radeon,ttm,drm_kms_helper
snd_seq_device          3673  1 snd_seq
rfkill                 10264  4 bluetooth,cfg80211
i2c_algo_bit            3497  1 radeon
snd                    34423  8 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
eeprom_93cx6             963  1 rt61pci
i2c_core               12787  4 radeon,drm_kms_helper,drm,i2c_algo_bit
parport_pc             15799  1 
soundcore               3450  1 snd
snd_page_alloc          5045  2 snd_intel8x0,snd_pcm
parport           Module                  Size  Used by
acpi_cpufreq            4951  0 
cpufreq_conservative     4018  0 
cpufreq_userspace       1480  0 
cpufreq_powersave        602  0 
cpufreq_stats           1997  0 
ppdev                   4058  0 
lp                      5570  0 
sco                     5885  2 
bridge                 33031  0 
stp                      996  1 bridge
bnep                    7452  2 
rfcomm                 25199  0 
l2cap                  21721  4 bnep,rfcomm
crc16                   1027  1 l2cap
bluetooth              36319  6 sco,bnep,rfcomm,l2cap
binfmt_misc             4907  1 
fuse                   44268  1 
ext2                   46245  1 
loop                    9769  0 
arc4                     974  2 
ecb                     1405  2 
rt61pci                15716  0 
crc_itu_t               1035  1 rt61pci
rt2x00pci               3773  1 rt61pci
snd_intel8x0           19595  1 
rt2x00lib              19101  2 rt61pci,rt2x00pci
snd_ac97_codec         79200  1 snd_intel8x0
radeon                511948  2 
ac97_bus                 710  1 snd_ac97_codec
ttm                    33502  1 radeon
led_class               1757  1 rt2x00lib
snd_pcm                47226  2 snd_intel8x0,snd_ac97_codec
mac80211              123586  2 rt2x00pci,rt2x00lib
drm_kms_helper         18569  1 radeon
snd_seq                35463  0 
snd_timer              12270  2 snd_pcm,snd_seq
cfg80211               87637  2 rt2x00lib,mac80211
drm                   111992  4 radeon,ttm,drm_kms_helper
snd_seq_device          3673  1 snd_seq
rfkill                 10264  4 bluetooth,cfg80211
i2c_algo_bit            3497  1 radeon
snd                    34423  8 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
eeprom_93cx6             963  1 rt61pci
i2c_core               12787  4 radeon,drm_kms_helper,drm,i2c_algo_bit
parport_pc             15799  1 
soundcore               3450  1 snd
snd_page_alloc          5045  2 snd_intel8x0,snd_pcm
parport                22554  3 ppdev,lp,parport_pc
rng_core                2178  0 
shpchp                 21220  0 
pci_hotplug            18545  1 shpchp
pcspkr                  1207  0 
evdev                   5609  7 
processor              26327  1 acpi_cpufreq
button                  3598  0 
ext3                   94396  5 
jbd                    32317  1 ext3
mbcache                 3762  2 ext2,ext3
sha256_generic         10748  2 
aes_i586                6816  2 
aes_generic            25738  1 aes_i586
cbc                     2047  1 
dm_crypt                9264  1 
dm_mod                 46234  21 dm_crypt
usbhid                 28008  0 
hid                    50909  1 usbhid
sg                     19937  0 
sd_mod                 26005  3 
crc_t10dif              1012  1 sd_mod
sr_mod                 10770  0 
cdrom                  26487  1 sr_mod
ata_generic             2247  0 
ata_piix               17736  2 
uhci_hcd               16057  0 
libata                115869  2 ata_generic,ata_piix
ehci_hcd               28693  0 
thermal                 9206  0 
thermal_sys             9378  2 processor,thermal
floppy                 40923  0 
skge                   30202  0 
usbcore                98969  4 usbhid,uhci_hcd,ehci_hcd
nls_base                4541  1 usbcore
scsi_mod              104853  4 sg,sd_mod,sr_mod,libata
     22554  3 ppdev,lp,parport_pc
rng_core                2178  0 
shpchp                 21220  0 
pci_hotplug            18545  1 shpchp
pcspkr                  1207  0 
evdev                   5609  7 
processor              26327  1 acpi_cpufreq
button                  3598  0 
ext3                   94396  5 
jbd                    32317  1 ext3
mbcache                 3762  2 ext2,ext3
sha256_generic         10748  2 
aes_i586                6816  2 
aes_generic            25738  1 aes_i586
cbc                     2047  1 
dm_crypt                9264  1 
dm_mod                 46234  21 dm_crypt
usbhid                 28008  0 
hid                    50909  1 usbhid
sg                 Module                  Size  Used by
acpi_cpufreq            4951  0 
cpufreq_conservative     4018  0 
cpufreq_userspace       1480  0 
cpufreq_powersave        602  0 
cpufreq_stats           1997  0 
ppdev                   4058  0 
lp                      5570  0 
sco                     5885  2 
bridge                 33031  0 
stp                      996  1 bridge
bnep                    7452  2 
rfcomm                 25199  0 
l2cap                  21721  4 bnep,rfcomm
crc16                   1027  1 l2cap
bluetooth              36319  6 sco,bnep,rfcomm,l2cap
binfmt_misc             4907  1 
fuse                   44268  1 
ext2                   46245  1 
loop                    9769  0 
arc4                     974  2 
ecb                     1405  2 
rt61pci                15716  0 
crc_itu_t               1035  1 rt61pci
rt2x00pci               3773  1 rt61pci
snd_intel8x0           19595  1 
rt2x00lib              19101  2 rt61pci,rt2x00pci
snd_ac97_codec         79200  1 snd_intel8x0
radeon                511948  2 
ac97_bus                 710  1 snd_ac97_codec
ttm                    33502  1 radeon
led_class               1757  1 rt2x00lib
snd_pcm                47226  2 snd_intel8x0,snd_ac97_codec
mac80211              123586  2 rt2x00pci,rt2x00lib
drm_kms_helper         18569  1 radeon
snd_seq                35463  0 
snd_timer              12270  2 snd_pcm,snd_seq
cfg80211               87637  2 rt2x00lib,mac80211
drm                   111992  4 radeon,ttm,drm_kms_helper
snd_seq_device          3673  1 snd_seq
rfkill                 10264  4 bluetooth,cfg80211
i2c_algo_bit            3497  1 radeon
snd                    34423  8 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
eeprom_93cx6             963  1 rt61pci
i2c_core               12787  4 radeon,drm_kms_helper,drm,i2c_algo_bit
parport_pc             15799  1 
soundcore               3450  1 snd
snd_page_alloc          5045  2 snd_intel8x0,snd_pcm
parport                22554  3 ppdev,lp,parport_pc
rng_core                2178  0 
shpchp                 21220  0 
pci_hotplug            18545  1 shpchp
pcspkr                  1207  0 
evdev                   5609  7 
processor              26327  1 acpi_cpufreq
button                  3598  0 
ext3                   94396  5 
jbd                    32317  1 ext3
mbcache                 3762  2 ext2,ext3
sha256_generic         10748  2 
aes_i586                6816  2 
aes_generic            25738  1 aes_i586
cbc                     2047  1 
dm_crypt                9264  1 
dm_mod                 46234  21 dm_crypt
usbhid                 28008  0 
hid                    50909  1 usbhid
sg                     19937  0 
sd_mod                 26005  3 
crc_t10dif              1012  1 sd_mod
sr_mod                 10770  0 
cdrom                  26487  1 sr_mod
ata_generic             2247  0 
ata_piix               17736  2 
uhci_hcd               16057  0 
libata                115869  2 ata_generic,ata_piix
ehci_hcd               28693  0 
thermal                 9206  0 
thermal_sys             9378  2 processor,thermal
floppy                 40923  0 
skge                   30202  0 
usbcore                98969  4 usbhid,uhci_hcd,ehci_hcd
nls_base                4541  1 usbcore
scsi_mod              104853  4 sg,sd_mod,sr_mod,libata
    19937  0 
sd_mod                 26005  3 
crc_t10dif              1012  1 sd_mod
sr_mod                 10770  0 
cdrom                  26487  1 sr_mod
ata_generic             2247  0 
ata_piix               17736  2 
uhci_hcd               16057  0 
libata                115869  2 ata_generic,ata_piix
ehci_hcd               28693  0 
thermal                 9206  0 
thermal_sys             9378  2 processor,thermal
floppy                 40923  0 
skge                   30202  0 
usbcore                98969  4 usbhid,uhci_hcd,ehci_hcd
nls_base                4541  1 usbcore
scsi_mod              104853  4 sg,sd_mod,sr_mod,libata

dmesg command gave me this info

Code:

[    0.174032] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.174043] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe4000000-0xe7ffffff]
[    0.174137] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[    0.174229] pci 0000:00:1d.0: reg 20 io port: [0xb800-0xb81f]
[    0.174283] pci 0000:00:1d.1: reg 20 io port: [0xc000-0xc01f]
[    0.174338] pci 0000:00:1d.2: reg 20 io port: [0xc400-0xc41f]
[    0.174392] pci 0000:00:1d.3: reg 20 io port: [0xc800-0xc81f]
[    0.174454] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbdffc00-0xfbdfffff]
[    0.174514] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.174520] pci 0000:00:1d.7: PME# disabled
[    0.174609] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.174640] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.174647] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.174655] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.174663] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.174670] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
[    0.174678] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.174724] pci 0000:00:1f.5: reg 10 io port: [0xb400-0xb4ff]
[    0.174731] pci 0000:00:1f.5: reg 14 io port: [0xb000-0xb03f]
[    0.174739] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfbdff800-0xfbdff9ff]
[    0.174746] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfbdff400-0xfbdff4ff]
[    0.174776] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.174781] pci 0000:00:1f.5: PME# disabled
[    0.174823] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[    0.174830] pci 0000:01:00.0: reg 14 io port: [0xd000-0xd0ff]
[    0.174837] pci 0000:01:00.0: reg 18 32bit mmio: [0xfbee0000-0xfbeeffff]
[    0.174854] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbec0000-0xfbedffff]
[    0.174875] pci 0000:01:00.0: supports D1 D2
[    0.174904] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[    0.174911] pci 0000:01:00.1: reg 14 32bit mmio: [0xfbef0000-0xfbefffff]
[    0.174943] pci 0000:01:00.1: supports D1 D2
[    0.174992] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.174997] pci 0000:00:01.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[    0.175002] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xfaffffff]
[    0.175051] pci 0000:02:0a.0: reg 10 32bit mmio: [0xfbff8000-0xfbffffff]
[    0.175143] pci 0000:02:0d.0: reg 10 32bit mmio: [0xfbff4000-0xfbff7fff]
[    0.175151] pci 0000:02:0d.0: reg 14 io port: [0xe800-0xe8ff]
[    0.175175] pci 0000:02:0d.0: reg 30 32bit mmio pref: [0xfbfc0000-0xfbfdffff]
[    0.175198] pci 0000:02:0d.0: supports D1 D2
[    0.175201] pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.175206] pci 0000:02:0d.0: PME# disabled
[    0.175239] pci 0000:00:1e.0: transparent bridge
[    0.175244] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[    0.175249] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[    0.175265] pci_bus 0000:00: on NUMA node 0
[    0.175270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.175379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.182515] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.182643] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.182765] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.182889] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.183012] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.183137] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.183261] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.183386] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.183511] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.183517] vgaarb: loaded
[    0.183541] PCI: Using ACPI for IRQ routing
[    0.183541] hpet clockevent registered
[    0.183541] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.183541] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.183541] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.188025] Switching to clocksource tsc
[    0.189637] pnp: PnP ACPI init
[    0.189653] ACPI: bus type pnp registered
[    0.193535] pnp: PnP ACPI: found 12 devices
[    0.193538] ACPI: ACPI bus type pnp unregistered
[    0.193543] PnPBIOS: Disabled by ACPI PNP
[    0.193559] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.193564] system 00:07: ioport range 0x800-0x87f has been reserved
[    0.193568] system 00:07: ioport range 0x400-0x41f has been reserved
[    0.193571] system 00:07: ioport range 0x480-0x4bf has been reserved
[    0.193576] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.193580] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
[    0.193589] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.193593] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.193602] system 00:0a: ioport range 0x290-0x297 has been reserved
[    0.193610] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    0.193614] system 00:0b: iomem range 0xc0000-0xdffff could not be reserved
[    0.193618] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[    0.193622] system 00:0b: iomem range 0x100000-0x7ffeffff could not be reserved
[    0.193626] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[    0.228424] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.228429] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.228435] pci 0000:00:01.0:   MEM window: 0xfbe00000-0xfbefffff
[    0.228440] pci 0000:00:01.0:   PREFETCH window: 0xe8000000-0xfaffffff
[    0.228448] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.228452] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    0.228458] pci 0000:00:1e.0:   MEM window: 0xfbf00000-0xfbffffff
[    0.228463] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.228481] pci 0000:00:1e.0: setting latency timer to 64
[    0.228486] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.228490] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.228494] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.228497] pci_bus 0000:01: resource 1 mem: [0xfbe00000-0xfbefffff]
[    0.228500] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xfaffffff]
[    0.228504] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
[    0.228507] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff]
[    0.228510] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.228514] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.228551] NET: Registered protocol family 2
[    0.228665] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.229074] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.229651] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.229939] TCP: Hash tables configured (established 131072 bind 65536)
[    0.229942] TCP reno registered
[    0.230042] NET: Registered protocol family 1
[    0.230147] pci 0000:01:00.0: Boot video device
[    0.230215] Unpacking initramfs...
[    0.574548] Freeing initrd memory: 9997k freed
[    0.580432] audit: initializing netlink socket (disabled)
[    0.580449] type=2000 audit(1323101998.579:1): initialized
[    0.584059] highmem bounce pool size: 64 pages
[    0.584067] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.585928] VFS: Disk quotas dquot_6.5.2
[    0.586001] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.586097] msgmni has been set to 1723
[    0.586383] alg: No test for stdrng (krng)
[    0.586460] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.586464] io scheduler noop registered
[    0.586467] io scheduler anticipatory registered
[    0.586470] io scheduler deadline registered
[    0.586520] io scheduler cfq registered (default)
[    0.586744] isapnp: Scanning for PnP cards...
[    0.940444] isapnp: No Plug & Play device found
[    0.942245] Linux agpgart interface v0.103
[    0.942344] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    0.945999] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe4000000
[    0.946089] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.946562] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.946565] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.947085] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.947194] mice: PS/2 mouse device common for all mice
[    0.947253] rtc_cmos 00:02: RTC can wake from S4
[    0.947300] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.947324] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.947341] cpuidle: using governor ladder
[    0.947344] cpuidle: using governor menu
[    0.947349] No iBFT detected.
[    0.947817] TCP cubic registered
[    0.947973] NET: Registered protocol family 10
[    0.949129] Mobile IPv6
[    0.949133] NET: Registered protocol family 17
[    0.949157] Using IPI No-Shortcut mode
[    0.949242] PM: Resume from disk failed.
[    0.949256] registered taskstats version 1
[    0.949513] rtc_cmos 00:02: setting system clock to 2011-12-05 16:19:59 UTC (1323101999)
[    0.949567] Initalizing network drop monitor service
[    0.949592] Freeing unused kernel memory: 380k freed
[    0.949800] Write protecting the kernel text: 2508k
[    0.949826] Write protecting the kernel read-only data: 920k
[    0.968187] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.037295] udev[59]: starting version 164
[    1.197873] SCSI subsystem initialized
[    1.215651] usbcore: registered new interface driver usbfs
[    1.215690] usbcore: registered new interface driver hub
[    1.215752] usbcore: registered new device driver usb
[    1.219813] skge 0000:02:0d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.219865] skge 1.13 addr 0xfbff4000 irq 23 chip Yukon-Lite rev 9
[    1.222086] skge eth0: addr 00:1a:92:56:20:be
[    1.226913] Floppy drive(s): fd0 is 1.44M
[    1.234445] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.234496] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.234517] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.234524] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.234564] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.234615] ehci_hcd 0000:00:1d.7: debug port 1
[    1.238493] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[    1.238671] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbdffc00
[    1.252519] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.252555] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.252561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.252565] usb usb1: Product: EHCI Host Controller
[    1.252570] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.252574] usb usb1: SerialNumber: 0000:00:1d.7
[    1.252809] usb usb1: configuration #1 chosen from 1 choice
[    1.252924] hub 1-0:1.0: USB hub found
[    1.252936] hub 1-0:1.0: 8 ports detected
[    1.265439] FDC 0 is a post-1991 82077
[    1.265842] libata version 3.00 loaded.
[    1.269322] uhci_hcd: USB Universal Host Controller Interface driver
[    1.269392] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.269404] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.269410] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.269433] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.269476] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
[    1.269535] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.269541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.269546] usb usb2: Product: UHCI Host Controller
[    1.269551] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.269555] usb usb2: SerialNumber: 0000:00:1d.0
[    1.273123] usb usb2: configuration #1 chosen from 1 choice
[    1.273245] hub 2-0:1.0: USB hub found
[    1.273258] hub 2-0:1.0: 2 ports detected
[    1.273352] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.273363] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.273369] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.273383] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.273420] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
[    1.273473] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.273479] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.273483] usb usb3: Product: UHCI Host Controller
[    1.273487] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.273491] usb usb3: SerialNumber: 0000:00:1d.1
[    1.273676] usb usb3: configuration #1 chosen from 1 choice
[    1.273782] hub 3-0:1.0: USB hub found
[    1.273794] hub 3-0:1.0: 2 ports detected
[    1.273869] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.273879] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.273884] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.273899] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.273933] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
[    1.273983] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.273989] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.273993] usb usb4: Product: UHCI Host Controller
[    1.273997] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.274001] usb usb4: SerialNumber: 0000:00:1d.2
[    1.274170] usb usb4: configuration #1 chosen from 1 choice
[    1.274275] hub 4-0:1.0: USB hub found
[    1.274286] hub 4-0:1.0: 2 ports detected
[    1.274358] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.274367] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.274373] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.274389] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.274416] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800
[    1.274469] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.274474] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.274479] usb usb5: Product: UHCI Host Controller
[    1.274483] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.274488] usb usb5: SerialNumber: 0000:00:1d.3
[    1.274659] usb usb5: configuration #1 chosen from 1 choice
[    1.274765] hub 5-0:1.0: USB hub found
[    1.274777] hub 5-0:1.0: 2 ports detected
[    1.275846] ata_piix 0000:00:1f.1: version 2.13
[    1.275863] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.275872] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.275925] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.276062] scsi0 : ata_piix
[    1.276223] scsi1 : ata_piix
[    1.279418] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.279426] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.468988] ata2.00: ATA-7: ST3250824A, 3.AAH, max UDMA/100
[    1.468995] ata2.00: 488397168 sectors, multi 16: LBA48 
[    1.469035] ata2.00: limited to UDMA/33 due to 40-wire cable
[    1.535610] ata2.00: configured for UDMA/33
[    1.632301] ata1.00: ATA-4: 4Head, 3.05, max UDMA/100
[    1.632305] ata1.00: 78125000 sectors, multi 16: LBA 
[    1.632347] ata1.01: ATAPI: LITE-ON DVDRW SHM-165H6S, HS0E, max UDMA/66
[    1.640239] ata1.00: configured for UDMA/100
[    1.672712] ata1.01: configured for UDMA/66
[    1.673373] scsi 0:0:0:0: Direct-Access     ATA      4Head            3.05 PQ: 0 ANSI: 5
[    1.674426] scsi 0:0:1:0: CD-ROM            LITE-ON  DVDRW SHM-165H6S HS0E PQ: 0 ANSI: 5
[    1.674729] scsi 1:0:0:0: Direct-Access     ATA      ST3250824A       3.AA PQ: 0 ANSI: 5
[    1.694334] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.694341] Uniform CD-ROM driver Revision: 3.20
[    1.694814] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.697012] sd 0:0:0:0: [sda] 78125000 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.697131] sd 0:0:0:0: [sda] Write Protect is off
[    1.697138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.697189] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.697482]  sda:
[    1.697770] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.697926] sd 1:0:0:0: [sdb] Write Protect is off
[    1.697933] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.697983] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.698253]  sdb: sda1 sda2 <
[    1.704967] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.705021] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.705081] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    1.708931]  sda5 >
[    1.712116] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.716804]  sdb1
[    1.717665] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.880022] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    2.055925] usb 4-1: New USB device found, idVendor=0461, idProduct=4d99
[    2.055932] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.055937] usb 4-1: Product: Asus gaming Mouse (G112)
[    2.056072] usb 4-1: configuration #1 chosen from 1 choice
[    2.071970] usbcore: registered new interface driver hiddev
[    2.075250] input: Asus gaming Mouse (G112) as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input1
[    2.075380] generic-usb 0003:0461:4D99.0001: input,hidraw0: USB HID v1.11 Mouse [Asus gaming Mouse (G112)] on usb-0000:00:1d.2-1/input0
[    2.075423] usbcore: registered new interface driver usbhid
[    2.075429] usbhid: v2.6:USB HID core driver
[    2.143154] device-mapper: uevent: version 1.0.3
[    2.143372] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[  145.792722] PM: Starting manual resume from disk
[  145.792728] PM: Resume from partition 254:4
[  145.792731] PM: Checking hibernation image.
[  145.805427] PM: Error -22 checking image file
[  145.805430] PM: Resume from disk failed.
[  145.858173] kjournald starting.  Commit interval 5 seconds
[  145.858189] EXT3-fs: mounted filesystem with ordered data mode.
[  148.217131] udev[400]: starting version 164
[  148.596218] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[  148.596231] ACPI: Power Button [PWRB]
[  148.596425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[  148.596435] ACPI: Power Button [PWRF]
[  148.610044] ACPI Warning: Incorrect checksum in table [SSDT] - DE, should be E5 (20090903/tbutils-314)
[  148.610061] ACPI: SSDT 7ffb3990 002E3 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[  148.611067] processor LNXCPU:00: registered as cooling_device0
[  148.611437] ACPI: SSDT 7ffb3c80 002DA (v01    AMI   CPU2PM 00000001 INTL 20060113)
[  148.612589] processor LNXCPU:01: registered as cooling_device1
[  148.679831] input: PC Speaker as /devices/platform/pcspkr/input/input4
[  148.703819] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  148.781433] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  148.932705] intel_rng: FWH not detected
[  149.071395] parport_pc 00:06: reported by Plug and Play ACPI
[  149.071499] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[  149.604467] [drm] Initialized drm 1.1.0 20060810
[  149.647936] cfg80211: Using static regulatory domain info
[  149.647942] cfg80211: Regulatory domain: US
[  149.647945] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  149.647952] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[  149.647957] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[  149.647962] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[  149.647967] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[  149.647972] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[  149.647977] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[  149.648116] cfg80211: Calling CRDA for country: US
[  150.304020] [drm] radeon kernel modesetting enabled.
[  150.304097] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  150.307701] [drm] radeon: Initializing kernel modesetting.
[  150.307860] [drm] register mmio base: 0xFBEE0000
[  150.307864] [drm] register mmio size: 65536
[  150.310344] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[  150.310541] [drm] Generation 2 PCI interface, using max accessible memory
[  150.310554] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[  150.310577] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[  150.310623] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[  150.310648] [drm] radeon: VRAM 128M
[  150.310651] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[  150.310655] [drm] radeon: GTT 64M
[  150.310659] [drm] radeon: GTT from 0xE4000000 to 0xE7FFFFFF
[  150.310679] [drm] radeon: irq initialized.
[  150.311464] [drm] Detected VRAM RAM=128M, BAR=128M
[  150.311470] [drm] RAM width 64bits DDR
[  150.311568] [TTM] Zone  kernel: Available graphics memory: 441360 kiB.
[  150.311573] [TTM] Zone highmem: Available graphics memory: 1037172 kiB.
[  150.311599] [drm] radeon: 128M of VRAM memory ready
[  150.311603] [drm] radeon: 64M of GTT memory ready.
[  150.311844] [drm] radeon: cp idle (0x02000603)
[  150.311896] [drm] Loading R200 Microcode
[  150.311901] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[  150.359785] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[  150.359838] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[  150.359898] radeon 0000:01:00.0: failled initializing CP (-2).
[  150.359955] radeon 0000:01:00.0: Disabling GPU acceleration
[  150.360012] [drm] radeon: cp finalized
[  150.360245] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[  150.360252] [drm] radeon: cp finalized
[  150.360642] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
[  150.360653] [TTM] Zone highmem: Used memory at exit: 0 kiB.
[  150.360660] [drm] radeon: ttm finalized
[  150.360667] [drm] Forcing AGP to PCI mode
[  150.363264] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[  150.363275] [drm] Generation 2 PCI interface, using max accessible memory
[  150.363279] [drm] radeon: VRAM 128M
[  150.363282] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[  150.363285] [drm] radeon: GTT 512M
[  150.363287] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[  150.363303] [drm] radeon: irq initialized.
[  150.363312] [drm] Detected VRAM RAM=128M, BAR=128M
[  150.363315] [drm] RAM width 64bits DDR
[  150.363380] [TTM] Zone  kernel: Available graphics memory: 441360 kiB.
[  150.363384] [TTM] Zone highmem: Available graphics memory: 1037172 kiB.
[  150.363402] [drm] radeon: 128M of VRAM memory ready
[  150.363405] [drm] radeon: 512M of GTT memory ready.
[  150.363409] [drm] GART: num cpu pages 131072, num gpu pages 131072
[  150.364447] [drm] radeon: cp idle (0x02000603)
[  150.364494] [drm] Loading R200 Microcode
[  150.364500] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[  150.367474] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[  150.367534] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[  150.367591] radeon 0000:01:00.0: failled initializing CP (-2).
[  150.367647] radeon 0000:01:00.0: Disabling GPU acceleration
[  150.367740] [drm] radeon: cp finalized
[  150.368767] [drm] Default TV standard: PAL
[  150.368771] [drm] 27.000000000 MHz TV ref clk
[  150.368778] [drm] DFP table revision: 4
[  150.369147] [drm] Default TV standard: PAL
[  150.369151] [drm] 27.000000000 MHz TV ref clk
[  150.369259] [drm] Radeon Display Connectors
[  150.369264] [drm] Connector 0:
[  150.369267] [drm]   VGA
[  150.369272] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[  150.369275] [drm]   Encoders:
[  150.369278] [drm]     CRT1: INTERNAL_DAC1
[  150.369282] [drm] Connector 1:
[  150.369285] [drm]   DVI-I
[  150.369288] [drm]   HPD1
[  150.369292] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[  150.369295] [drm]   Encoders:
[  150.369298] [drm]     CRT2: INTERNAL_DAC2
[  150.369301] [drm]     DFP1: INTERNAL_TMDS1
[  150.369304] [drm] Connector 2:
[  150.369307] [drm]   S-video
[  150.369310] [drm]   Encoders:
[  150.369313] [drm]     TV1: INTERNAL_DAC2
[  150.412548] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  150.412603] Intel ICH 0000:00:1f.5: setting latency timer to 64
[  150.480281] rt61pci 0000:02:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[  150.532883] [drm] fb mappable at 0xE8040000
[  150.532888] [drm] vram apper at 0xE8000000
[  150.532892] [drm] size 8294400
[  150.532896] [drm] fb depth is 24
[  150.532899] [drm]    pitch is 7680
[  150.623721] Console: switching to colour frame buffer device 240x67
[  150.645560] phy0: Selected rate control algorithm 'minstrel'
[  150.647394] Registered led device: rt61pci-phy0::radio
[  150.647468] Registered led device: rt61pci-phy0::assoc
[  150.666237] fb0: radeondrmfb frame buffer device
[  150.666241] registered panic notifier
[  150.667187] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[  150.832027] intel8x0_measure_ac97_clock: measured 51849 usecs (2499 samples)
[  150.832033] intel8x0: clocking to 48000
[  151.637803] EXT3 FS on dm-1, internal journal
[  151.958389] loop: module loaded
[  152.857232] Adding 3338232k swap on /dev/mapper/debian-swap_1.  Priority:-1 extents:1 across:3338232k 
[  154.673163] kjournald starting.  Commit interval 5 seconds
[  154.676557] EXT3 FS on dm-6, internal journal
[  154.676566] EXT3-fs: mounted filesystem with ordered data mode.
[  154.746105] kjournald starting.  Commit interval 5 seconds
[  154.748939] EXT3 FS on dm-5, internal journal
[  154.748947] EXT3-fs: mounted filesystem with ordered data mode.
[  154.857822] kjournald starting.  Commit interval 5 seconds
[  154.860299] EXT3 FS on dm-2, internal journal
[  154.860308] EXT3-fs: mounted filesystem with ordered data mode.
[  154.918904] kjournald starting.  Commit interval 5 seconds
[  154.920286] EXT3 FS on dm-3, internal journal
[  154.920295] EXT3-fs: mounted filesystem with ordered data mode.
[  158.705853] fuse init (API version 7.13)
[  161.942480] rt61pci 0000:02:0a.0: firmware: requesting rt2561s.bin
[  162.050127] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[  162.059528] skge eth0: enabling interface
[  162.062785] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  162.317520] rt61pci 0000:02:0a.0: firmware: requesting rt2561s.bin
[  162.320530] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[  170.383335] Bluetooth: Core ver 2.15
[  170.383428] NET: Registered protocol family 31
[  170.383432] Bluetooth: HCI device and connection manager initialized
[  170.383437] Bluetooth: HCI socket layer initialized
[  170.514372] Bluetooth: L2CAP ver 2.14
[  170.514377] Bluetooth: L2CAP socket layer initialized
[  170.611793] Bluetooth: RFCOMM TTY layer initialized
[  170.611801] Bluetooth: RFCOMM socket layer initialized
[  170.611806] Bluetooth: RFCOMM ver 1.11
[  170.630311] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  170.630316] Bluetooth: BNEP filters: protocol multicast
[  171.178841] Bridge firewalling registered
[  171.578705] Bluetooth: SCO (Voice Link) ver 0.6
[  171.578710] Bluetooth: SCO socket layer initialized
[  172.660272] lp0: using parport0 (interrupt-driven).
[  172.715340] ppdev: user-space parallel port driver
[  185.912127] CPU0 attaching NULL sched-domain.
[  185.912136] CPU1 attaching NULL sched-domain.
[  185.939961] CPU0 attaching sched-domain:
[  185.939968]  domain 0: span 0-1 level SIBLING
[  185.939973]   groups: group c280370c cpus 0 (cpu_power = 589) group c290370c cpus 1 (cpu_power = 589)
[  185.939987]   domain 1: span 0-1 level MC
[  185.939991]    groups: group c2803778 cpus 0-1 (cpu_power = 1178)
[  185.940002] CPU1 attaching sched-domain:
[  185.940007]  domain 0: span 0-1 level SIBLING
[  185.940012]   groups: group c290370c cpus 1 (cpu_power = 589) group c280370c cpus 0 (cpu_power = 589)
[  185.940024]   domain 1: span 0-1 level MC
[  185.940028]    groups: group c2803778 cpus 0-1 (cpu_power = 1178)

Sorry for all the garbage in that last part but I dont know how to tell what a wireless message or a wlan error looks like yet

dmesg | grep firmware command gave me this info

Code:

[  150.311901] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[  150.359785] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[  150.359838] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[  150.364500] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[  150.367474] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[  150.367534] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[  161.942480] rt61pci 0000:02:0a.0: firmware: requesting rt2561s.bin
[  162.050127] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[  162.317520] rt61pci 0000:02:0a.0: firmware: requesting rt2561s.bin
[  162.320530] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.

and last but not least

uname -r gave me This Info

Code:

2.6.23-5-686

That should be all of it... dont know if it helps but there it is

Thanx again

**jayd512** · 12-08-2011

I didn't see these new posts until now.
Aside from the info you posted, can you also give the output of

Code:

ifconfig -a

**Kodocha** · 12-09-2011

ifconfig gave me this... sorry I forgot the -a

Code:

eth0      Link encap:Ethernet  HWaddr 00:1a:92:56:20:be  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:23 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:44 errors:0 dropped:0 overruns:0 frame:0
          TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:2936 (2.8 KiB)  TX bytes:2936 (2.8 KiB)

ifconfig -a gave me

Code:


eth0      Link encap:Ethernet  HWaddr 00:1a:92:56:20:be  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:23 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:48 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:3200 (3.1 KiB)  TX bytes:3200 (3.1 KiB)

pan0      Link encap:Ethernet  HWaddr de:04:73:06:d3:d6  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:18:39:1c:e0:56  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

hope that helps

**rokytnji** · 12-09-2011

wlan0 is your wireless interface. What are you using in Debian to connect to internet. I use Wicd in AntiX which is basically Debian Wheezy. What Desktop are you using Also. Gnome,KDE,XFCE.ICEWM,Fluxbox?

This part don't look good.

162.317520] rt61pci 0000:02:0a.0: firmware: requesting rt2561s.bin

and your kernel is ancient

2.6.23-5-686

By Linux and Debian Standards. My uname -r (remember I am on Debian Testing)

Code:

@biker:~$ uname -r
2.6.38-7.dmz.2-liquorix-686

I think Debian Squeeze even is at 2.6.32 and that is current stable Debian. See. You are learning new stuff already.

**Kodocha** · 12-09-2011

lol yeah this is debian squeeze the stable version... I DL it off their website last week or so. I don't care that it's ancient I can deal with that later I need Stability for learning and can take training wheels off once I learn my way around. for example what you just asked

"What are you using in Debian to connect to internet?"

umm it's not connecting to the internet that's the problem...

"I use Wicd in AntiX which is basically Debian Wheezy."
NO CLUE! what any of that really means.

"What Desktop are you using Also. Gnome,KDE,XFCE.ICEWM,Fluxbox?"

AH! that I know... am using GNOME

for now I need to at least get this thing working connected to the internet so i can start really screwing aroung with it and learning how to use it...

**rokytnji** · 12-09-2011

AH! that I know... am using GNOME

Then you should be using Network Manager to connect. What shows when you left click on top r/h side of top taskbar where network manager applet sits.

I mentioned the older kernel just because a newer kernel will probably give you out of the box wireless since later
kernels have more modules in them.

rt61pci - Debian Wiki

Installation

The rt61pci driver is included in the mainline Linux kernel since version 2.6.24. It is included as a module in Debian kernel images.

Firmware is required to be installed prior to device operation:

Add a "non-free" component to /etc/apt/sources.list for your Debian version. For example:

see what I mean. Now to jump through hoops because of your older kernel. Add this line to your /etc/apt/sources.list .

Code:

deb http://ftp.us.debian.org/debian squeeze main contrib non-free

Then follow steps 2 through 7 in the link I provided.

My /etc/apt/sources.list as a example. (Do not use my repos inn Squeeze)

Code:

@Biker:/mnt/sdb1/home/harry$ inxi -r
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://ftp.us.debian.org/debian/ testing main contrib non-free
           deb http://security.debian.org/ testing/updates main contrib non-free

Thread Tools

Display

Linux NOOB New install can't connect to the internet :(

ok Heres what the commands gave me

Posting Permissions