Find the answer to your Linux question:
Results 1 to 8 of 8
Hi I'm very new to linux and I installed opensuse and wireless wasn't working I then faffed about and got it working but I can't post the site i'm a ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jan 2012
    Posts
    11

    got it working then it stopped?


    Hi I'm very new to linux and I installed opensuse and wireless wasn't working I then faffed about and got it working but I can't post the site i'm a newb and got it working
    Then the next time i booted it up it stopped working and it still isn't working i'm typing this through wired connection.

    This is the result of the wirelesssetup.txt thing

    Code:
    ============ lspci ============
    
    ============ lsusb ============
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    
    ============ lsmod ============
    Module                  Size  Used by
    ip6t_LOG               12847  5 
    xt_tcpudp              12788  2 
    xt_pkttype             12456  3 
    ipt_LOG                12880  5 
    xt_limit               12541  10 
    af_packet              26605  4 
    ip6t_REJECT            12809  3 
    nf_conntrack_ipv6      13936  3 
    nf_defrag_ipv6         18017  1 nf_conntrack_ipv6
    ip6table_raw           12603  1 
    xt_NOTRACK             12456  4 
    ipt_REJECT             12512  3 
    iptable_raw            12598  1 
    iptable_filter         12706  1 
    ip6table_mangle        12652  0 
    nf_conntrack_netbios_ns    12585  0 
    nf_conntrack_broadcast    12541  1 nf_conntrack_netbios_ns
    nf_conntrack_ipv4      14319  3 
    nf_defrag_ipv4         12649  1 nf_conntrack_ipv4
    ip_tables              18302  2 iptable_raw,iptable_filter
    xt_conntrack           12664  6 
    nf_conntrack           79552  6 nf_conntrack_ipv6,xt_NOTRACK,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_conntrack_ipv4,xt_conntrack
    ip6table_filter        12711  1 
    ip6_tables             18432  4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
    x_tables               26198  16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,xt_conntrack,ip6table_filter,ip6_tables
    microcode              22828  0 
    mperf                  12603  0 
    fuse                   81337  4 
    snd_hda_codec_idt      68502  1 
    r852                   17901  0 
    snd_hda_intel          32497  2 
    sm_common              16737  1 r852
    nand                   53803  2 r852,sm_common
    nand_ids                8547  1 nand
    nand_bch               13003  1 nand
    firewire_ohci          35846  0 
    bch                    21757  1 nand_bch
    snd_hda_codec         105578  2 snd_hda_codec_idt,snd_hda_intel
    nand_ecc               13070  1 nand
    firewire_core          61002  1 firewire_ohci
    sdhci_pci              13864  0 
    r592                   17808  0 
    b44                    35460  0 
    sdhci                  32185  1 sdhci_pci
    mtd                    39758  2 sm_common,nand
    crc_itu_t              12627  1 firewire_core
    memstick               16010  1 r592
    snd_hwdep              13276  1 snd_hda_codec
    snd_pcm                97307  2 snd_hda_intel,snd_hda_codec
    snd_timer              28931  1 snd_pcm
    snd                    69952  10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore              14635  1 snd
    iTCO_wdt               17575  0 
    snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
    i2c_i801               17701  0 
    iTCO_vendor_support    13502  1 iTCO_wdt
    arc4                   12473  2 
    sr_mod                 22048  0 
    sg                     35770  0 
    cdrom                  46732  1 sr_mod
    b43                   345060  0 
    mac80211              298525  1 b43
    cfg80211              183388  2 b43,mac80211
    bcma                   24647  1 b43
    ssb                    65223  2 b44,b43
    mmc_core               98891  3 sdhci,b43,ssb
    pcmcia                 55657  2 b43,ssb
    pcmcia_core            22325  1 pcmcia
    dell_laptop            13491  0 
    rfkill                 24962  2 cfg80211,dell_laptop
    dell_wmi               12601  0 
    dcdbas                 14489  1 dell_laptop
    sparse_keymap          13658  1 dell_wmi
    pcspkr                 12614  0 
    battery                18200  0 
    joydev                 17322  0 
    wmi                    18744  1 dell_wmi
    ac                     12895  0 
    pciehp                 32620  0 
    pci_hotplug            34483  1 pciehp
    autofs4                37842  2 
    i915                  580691  3 
    drm_kms_helper         36953  1 i915
    drm                   208819  4 i915,drm_kms_helper
    thermal                18377  0 
    i2c_algo_bit           13199  1 i915
    button                 13661  1 i915
    video                  19101  1 i915
    processor              43756  1 
    thermal_sys            20200  3 thermal,video,processor
    ata_generic            12809  0 
    
    ============ dmesg-firmware ============
    [   24.674058] b43-phy0: Loading firmware version 508.154 (2009-08-18 00:58:22)
    
    ============ kernel version ============
    3.1.0-1.2-desktop
    
    ============ ifconfig ============
    
    ============ iwconfig ============
    Thanks for any help!
    Last edited by jayd512; 01-06-2012 at 10:04 PM. Reason: added code tags

  2. #2
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    I believe you were posting about this in the Mint sub-section, as well...
    What were the steps you used to get it working?
    Second question... you're missing the info for lspci and ifconfig in your above output... could you provide that?
    Last edited by jayd512; 01-06-2012 at 10:17 PM. Reason: spelling
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  3. #3
    Just Joined!
    Join Date
    Jan 2012
    Posts
    11
    Sorry about that I should have just kept it to one thread! I wasn't sure if the same commands apply to different versions of linux. You are the most helpful forum poster I've ever come across.

    Heres lspci
    Code:
    00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: agpgart-intel
    00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: i915
    00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
    	Subsystem: Dell Device [1028:01f1]
    00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: uhci_hcd
    00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: uhci_hcd
    00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: ehci_hcd
    00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
    	Kernel driver in use: pcieport
    00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
    	Kernel driver in use: pcieport
    00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02)
    	Kernel driver in use: pcieport
    00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: uhci_hcd
    00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: uhci_hcd
    00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: uhci_hcd
    00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: ehci_hcd
    00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2)
    00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: ata_piix
    00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: ahci
    00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: i801_smbus
    03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: b44
    03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: firewire_ohci
    03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: sdhci-pci
    03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: r592
    03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
    	Subsystem: Dell Device [1028:01f1]
    	Kernel driver in use: r852
    0c:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
    	Subsystem: Dell Wireless 1390 WLAN Mini-Card [1028:0007]
    	Kernel driver in use: b43-pci-bridge
    ifconfig
    Code:
    eth0      Link encap:Ethernet  HWaddr 00:1C:23:AD:6B:66  
              inet addr:192.168.1.70  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::21c:23ff:fead:6b66/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:5276 errors:0 dropped:0 overruns:0 frame:0
              TX packets:5280 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:4637988 (4.4 Mb)  TX bytes:1158038 (1.1 Mb)
              Interrupt:17 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:160 errors:0 dropped:0 overruns:0 frame:0
              TX packets:160 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:11965 (11.6 Kb)  TX bytes:11965 (11.6 Kb)
    
    wlan0     Link encap:Ethernet  HWaddr 00:1F:3A:03:ED:37  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    Here's dsmeg firmware if that helps too?
    Code:
    [   24.890058] b43-phy0: Loading firmware version 508.154 (2009-08-18 00:58:22)
    and dsmeg
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.1.0-1.2-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0)
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f66d800 (usable)
    [    0.000000]  BIOS-e820: 000000003f66d800 - 0000000040000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
    [    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI 2.4 present.
    [    0.000000] DMI: Dell Inc. Inspiron 1520                   /0KY767, BIOS A04 11/05/2007
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] last_pfn = 0x3f66d max_arch_pfn = 0x1000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FC0000000 write-back
    [    0.000000]   1 base 03F800000 mask FFF800000 uncachable
    [    0.000000]   2 base 03F700000 mask FFFF00000 uncachable
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] initial memory mapped : 0 - 01200000
    [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [    0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
    [    0.000000]  0000000000 - 0000200000 page 4k
    [    0.000000]  0000200000 - 0037000000 page 2M
    [    0.000000]  0037000000 - 00371fe000 page 4k
    [    0.000000] kernel direct mapping tables up to 371fe000 @ 11f6000-1200000
    [    0.000000] RAMDISK: 37402000 - 37ff0000
    [    0.000000] Allocated new RAMDISK: 36610000 - 371fd37e
    [    0.000000] Move RAMDISK from 0000000037402000 - 0000000037fef37d to 36610000 - 371fd37d
    [    0.000000] ACPI: RSDP 000fbbf0 00024 (v02 DELL  )
    [    0.000000] ACPI: XSDT 3f66f200 00064 (v01 DELL    M08     27D70B05 ASL  00000061)
    [    0.000000] ACPI: FACP 3f66f09c 000F4 (v04 DELL    M08     27D70B05 ASL  00000061)
    [    0.000000] ACPI: DSDT 3f66f800 0565E (v02 INT430 SYSFexxx 00001001 INTL 20050624)
    [    0.000000] ACPI: FACS 3f67e000 00040
    [    0.000000] ACPI: HPET 3f66f300 00038 (v01 DELL    M08     00000001 ASL  00000061)
    [    0.000000] ACPI: APIC 3f66f400 00068 (v01 DELL    M08     27D70B05 ASL  00000047)
    [    0.000000] ACPI: MCFG 3f66f3c0 0003E (v16 DELL    M08     27D70B05 ASL  00000061)
    [    0.000000] ACPI: SLIC 3f66f49c 00176 (v01 DELL    M08     27D70B05 ASL  00000061)
    [    0.000000] ACPI: BOOT 3f66efc0 00028 (v01 DELL    M08     27D70B05 ASL  00000061)
    [    0.000000] ACPI: SSDT 3f66e257 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
    [    0.000000] ACPI: SSDT 3f66dd8b 004CC (v01  PmRef    CpuPm 00003000 INTL 20050624)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-000000003f66d000
    [    0.000000] node 0 pfn: [0 - 3f66d]
    [    0.000000] remap_alloc: node 0 [3ee00000-3f600000) -> [f5e00000-f6600000)
    [    0.000000] Initmem setup node 0 0000000000000000-000000003f66d000
    [    0.000000]   NODE_DATA [0000000035e00000 - 0000000035e01fff] (remapped)
    [    0.000000] 132MB HIGHMEM available.
    [    0.000000] 881MB LOWMEM available.
    [    0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
    [    0.000000] Low memory ends at vaddr f71fe000
    [    0.000000] High memory starts at vaddr f71fe000
    [    0.000000]   mapped low ram: 0 - 371fe000
    [    0.000000]   low ram: 0 - 371fe000
    [    0.000000] Node: 0, start_pfn: 10, end_pfn: 9f
    [    0.000000]   Setting physnode_map array to node 0 for pfns:
    [    0.000000]   10 
    [    0.000000] Node: 0, start_pfn: 100, end_pfn: 3f66d
    [    0.000000]   Setting physnode_map array to node 0 for pfns:
    [    0.000000]   100 4100 8100 c100 10100 14100 18100 1c100 20100 24100 28100 2c100 30100 34100 38100 3c100 
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x000371fe
    [    0.000000]   HighMem  0x000371fe -> 0x0003f66d
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[2] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x0003f66d
    [    0.000000] On node 0 totalpages: 259580
    [    0.000000] free_area_init_node: node 0, pgdat f5e00000, node_mem_map f5e02200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1732 pages used for memmap
    [    0.000000]   Normal zone: 219962 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 265 pages used for memmap
    [    0.000000]   HighMem zone: 33638 pages, LIFO batch:7
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x1008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b8000000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 13 pages/cpu @f5c00000 s30144 r0 d23104 u1048576
    [    0.000000] pcpu-alloc: s30144 r0 d23104 u1048576 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257551
    [    0.000000] Policy zone: HighMem
    [    0.000000] Kernel command line: root=/dev/disk/by-id/ata-ST980811AS_5LY99RTV-part5 resume=/dev/disk/by-id/ata-ST980811AS_5LY99RTV-part2 splash=silent quiet
    [    0.000000] bootsplash: silent mode.
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 4154832 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (000371fe:0003f66d)
    [    0.000000] Memory: 994088k/1038772k available (5184k kernel code, 36040k reserved, 3873k data, 488k init, 127420k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xff5b4000 - 0xfffff000   (10540 kB)
    [    0.000000]     pkmap   : 0xff200000 - 0xff400000   (2048 kB)
    [    0.000000]     vmalloc : 0xf79fe000 - 0xff1fe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf71fe000   ( 881 MB)
    [    0.000000]       .init : 0xc0ad9000 - 0xc0b53000   ( 488 kB)
    [    0.000000]       .data : 0xc071038c - 0xc0ad8a80   (3873 kB)
    [    0.000000]       .text : 0xc0200000 - 0xc071038c   (5184 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] Preemptible hierarchical RCU implementation.
    [    0.000000] NR_IRQS:8448 nr_irqs:512 16
    [    0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 1862.015 MHz processor.
    [    0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.03 BogoMIPS (lpj=1862015)
    [    0.001007] pid_max: default: 32768 minimum: 301
    [    0.001054] Security Framework initialized
    [    0.001077] AppArmor: AppArmor initialized
    [    0.001140] Mount-cache hash table entries: 512
    [    0.001301] Initializing cgroup subsys cpuacct
    [    0.001307] Initializing cgroup subsys memory
    [    0.001318] Initializing cgroup subsys devices
    [    0.001321] Initializing cgroup subsys freezer
    [    0.001323] Initializing cgroup subsys net_cls
    [    0.001326] Initializing cgroup subsys blkio
    [    0.001335] Initializing cgroup subsys perf_event
    [    0.001376] mce: CPU supports 6 MCE banks
    [    0.001386] CPU0: Thermal monitoring enabled (TM2)
    [    0.001390] using mwait in idle threads.
    [    0.001604] SMP alternatives: switching to UP code
    [    0.009642] ACPI: Core revision 20110623
    [    0.015074] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.015460] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.025637] CPU0: Intel(R) Celeron(R) CPU          540  @ 1.86GHz stepping 01
    [    0.025998] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
    [    0.025998] ... version:                2
    [    0.025998] ... bit width:              40
    [    0.025998] ... generic registers:      2
    [    0.025998] ... value mask:             000000ffffffffff
    [    0.025998] ... max period:             000000007fffffff
    [    0.025998] ... fixed-purpose events:   3
    [    0.025998] ... event mask:             0000000700000003
    [    0.033476] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.035002] Brought up 1 CPUs
    [    0.035005] Total of 1 processors activated (3724.03 BogoMIPS).
    [    0.035707] devtmpfs: initialized
    [    0.036088] print_constraints: dummy: 
    [    0.036129] RTC time: 20:47:08, date: 01/09/12
    [    0.036177] NET: Registered protocol family 16
    [    0.036423] ACPI: bus type pci registered
    [    0.036498] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [    0.036502] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [    0.036504] PCI: Using MMCONFIG for extended config space
    [    0.036506] PCI: Using configuration type 1 for base access
    [    0.036521] dmi type 0xB1 record - unknown flag
    [    0.037622] bio: create slab <bio-0> at 0
    [    0.037710] ACPI: Added _OSI(Module Device)
    [    0.037713] ACPI: Added _OSI(Processor Device)
    [    0.037715] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.037718] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.039135] ACPI: EC: Look up EC in DSDT
    [    0.049081] ACPI: Interpreter enabled
    [    0.049088] ACPI: (supports S0 S3 S4 S5)
    [    0.049113] ACPI: Using IOAPIC for interrupt routing
    [    0.088236] ACPI: No dock devices found.
    [    0.088239] HEST: Table not found.
    [    0.088245] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.103913] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.131371] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
    [    0.131375] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
    [    0.131378] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.131381] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
    [    0.131384] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xf7ffffff] (ignored)
    [    0.131387] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] (ignored)
    [    0.131390] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] (ignored)
    [    0.131393] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] (ignored)
    [    0.131396] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] (ignored)
    [    0.131399] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] (ignored)
    [    0.131402] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] (ignored)
    [    0.131405] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] (ignored)
    [    0.131419] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [    0.131477] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
    [    0.131494] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit]
    [    0.131505] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [    0.131513] pci 0000:00:02.0: reg 20: [io  0xeff8-0xefff]
    [    0.131553] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
    [    0.131567] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit]
    [    0.131667] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [    0.131731] pci 0000:00:1a.0: reg 20: [io  0x6f20-0x6f3f]
    [    0.131776] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [    0.131840] pci 0000:00:1a.1: reg 20: [io  0x6f00-0x6f1f]
    [    0.131903] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [    0.131930] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
    [    0.132037] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.132044] pci 0000:00:1a.7: PME# disabled
    [    0.132079] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [    0.132104] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
    [    0.132198] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.132204] pci 0000:00:1b.0: PME# disabled
    [    0.132238] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [    0.132335] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.132340] pci 0000:00:1c.0: PME# disabled
    [    0.132376] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
    [    0.132473] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.132479] pci 0000:00:1c.1: PME# disabled
    [    0.132517] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
    [    0.132614] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [    0.132620] pci 0000:00:1c.3: PME# disabled
    [    0.132656] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [    0.132720] pci 0000:00:1d.0: reg 20: [io  0x6f80-0x6f9f]
    [    0.132765] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [    0.132828] pci 0000:00:1d.1: reg 20: [io  0x6f60-0x6f7f]
    [    0.132873] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [    0.132936] pci 0000:00:1d.2: reg 20: [io  0x6f40-0x6f5f]
    [    0.133003] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [    0.133031] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
    [    0.133132] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.133138] pci 0000:00:1d.7: PME# disabled
    [    0.133164] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [    0.133261] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [    0.133387] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [    0.133395] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
    [    0.133400] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
    [    0.133407] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
    [    0.133454] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [    0.133473] pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
    [    0.133487] pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
    [    0.133500] pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
    [    0.133514] pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
    [    0.133528] pci 0000:00:1f.1: reg 20: [io  0x6fa0-0x6faf]
    [    0.133586] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
    [    0.133617] pci 0000:00:1f.2: reg 10: [io  0x6eb0-0x6eb7]
    [    0.133631] pci 0000:00:1f.2: reg 14: [io  0x6eb8-0x6ebb]
    [    0.133644] pci 0000:00:1f.2: reg 18: [io  0x6ec0-0x6ec7]
    [    0.133658] pci 0000:00:1f.2: reg 1c: [io  0x6ec8-0x6ecb]
    [    0.133672] pci 0000:00:1f.2: reg 20: [io  0x6ee0-0x6eff]
    [    0.133686] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff]
    [    0.133738] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.133744] pci 0000:00:1f.2: PME# disabled
    [    0.133769] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [    0.133788] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff]
    [    0.133835] pci 0000:00:1f.3: reg 20: [io  0x10c0-0x10df]
    [    0.133945] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
    [    0.134108] pci 0000:0c:00.0: [14e4:4311] type 0 class 0x000280
    [    0.134177] pci 0000:0c:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff]
    [    0.134590] pci 0000:0c:00.0: supports D1 D2
    [    0.134676] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
    [    0.134705] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
    [    0.134714] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
    [    0.134790] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
    [    0.134796] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
    [    0.134802] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
    [    0.134811] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [    0.134862] pci 0000:03:00.0: [14e4:170c] type 0 class 0x000200
    [    0.134886] pci 0000:03:00.0: reg 10: [mem 0xfe5fe000-0xfe5fffff]
    [    0.134980] pci 0000:03:00.0: supports D1 D2
    [    0.134982] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.134993] pci 0000:03:00.0: PME# disabled
    [    0.135019] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00
    [    0.135038] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
    [    0.135040] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
    [    0.135058] pci 0000:03:01.0: reg 10: [mem 0xfe5fd800-0xfe5fdfff]
    [    0.135157] pci 0000:03:01.0: supports D1 D2
    [    0.135159] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.135165] pci 0000:03:01.0: PME# disabled
    [    0.135190] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805
    [    0.135215] pci 0000:03:01.1: reg 10: [mem 0xfe5fd400-0xfe5fd4ff]
    [    0.135314] pci 0000:03:01.1: supports D1 D2
    [    0.135316] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.135322] pci 0000:03:01.1: PME# disabled
    [    0.135349] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880
    [    0.135373] pci 0000:03:01.2: reg 10: [mem 0xfe5fd600-0xfe5fd6ff]
    [    0.135472] pci 0000:03:01.2: supports D1 D2
    [    0.135475] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.135480] pci 0000:03:01.2: PME# disabled
    [    0.135505] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880
    [    0.135529] pci 0000:03:01.3: reg 10: [mem 0xfe5fd700-0xfe5fd7ff]
    [    0.135626] pci 0000:03:01.3: supports D1 D2
    [    0.135628] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.135633] pci 0000:03:01.3: PME# disabled
    [    0.135708] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [    0.135717] pci 0000:00:1e.0:   bridge window [mem 0xfe500000-0xfe5fffff]
    [    0.135727] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
    [    0.135730] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
    [    0.135763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.136207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    [    0.136371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [    0.136451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [    0.136533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [    0.136614]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.136618]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.136620] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.152490] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
    [    0.152598] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
    [    0.152704] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
    [    0.152810] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
    [    0.152915] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [    0.153032] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.153141] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
    [    0.153230] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.153359] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.153372] vgaarb: loaded
    [    0.153373] vgaarb: bridge control possible 0000:00:02.0
    [    0.153561] SCSI subsystem initialized
    [    0.153617] libata version 3.00 loaded.
    [    0.153676] usbcore: registered new interface driver usbfs
    [    0.153697] usbcore: registered new interface driver hub
    [    0.153727] usbcore: registered new device driver usb
    [    0.153803] PCI: Using ACPI for IRQ routing
    [    0.156711] PCI: pci_cache_line_size set to 64 bytes
    [    0.156831] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
    [    0.156835] reserve RAM buffer: 000000003f66d800 - 000000003fffffff 
    [    0.156954] NetLabel: Initializing
    [    0.156956] NetLabel:  domain hash size = 128
    [    0.156958] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.156971] NetLabel:  unlabeled traffic allowed by default
    [    0.156978] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.156997] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.157002] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.160008] Switching to clocksource hpet
    [    0.160969] Switched to NOHz mode on CPU #0
    [    0.162788] AppArmor: AppArmor Filesystem Enabled
    [    0.162828] pnp: PnP ACPI init
    [    0.162850] ACPI: bus type pnp registered
    [    0.176718] pnp 00:00: [bus 00-ff]
    [    0.176722] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.176725] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.176728] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.176731] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.176734] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [    0.176736] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
    [    0.176739] pnp 00:00: [mem 0xfc000000-0xfebfffff window]
    [    0.176742] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
    [    0.176745] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
    [    0.176748] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
    [    0.176751] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
    [    0.176753] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
    [    0.176756] pnp 00:00: [mem 0xffb00000-0xffefffff window]
    [    0.176840] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [    0.176880] pnp 00:01: [irq 12]
    [    0.176910] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
    [    0.176935] pnp 00:02: [io  0x0060]
    [    0.176937] pnp 00:02: [io  0x0064]
    [    0.176939] pnp 00:02: [io  0x0062]
    [    0.176941] pnp 00:02: [io  0x0066]
    [    0.176947] pnp 00:02: [irq 1]
    [    0.176976] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.176999] pnp 00:03: [io  0x0070-0x0071]
    [    0.177020] pnp 00:03: [irq 8]
    [    0.177022] pnp 00:03: [io  0x0072-0x0077]
    [    0.177053] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.177079] pnp 00:04: [io  0x0061]
    [    0.177082] pnp 00:04: [io  0x0063]
    [    0.177084] pnp 00:04: [io  0x0065]
    [    0.177086] pnp 00:04: [io  0x0067]
    [    0.177114] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.177135] pnp 00:05: [io  0x0c80-0x0cff]
    [    0.177198] system 00:05: [io  0x0c80-0x0cff] could not be reserved
    [    0.177202] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.177229] pnp 00:06: [dma 4]
    [    0.177232] pnp 00:06: [io  0x0000-0x000f]
    [    0.177234] pnp 00:06: [io  0x0080-0x0085]
    [    0.177236] pnp 00:06: [io  0x0087-0x008f]
    [    0.177238] pnp 00:06: [io  0x00c0-0x00df]
    [    0.177241] pnp 00:06: [io  0x0010-0x001f]
    [    0.177243] pnp 00:06: [io  0x0090-0x0091]
    [    0.177245] pnp 00:06: [io  0x0093-0x009f]
    [    0.177276] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.177299] pnp 00:07: [io  0x00f0-0x00ff]
    [    0.177306] pnp 00:07: [irq 13]
    [    0.177336] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.177399] pnp 00:08: [mem 0xfed00000-0xfed003ff]
    [    0.177450] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
    [    0.177454] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [    0.177668] pnp 00:09: [io  0x0900-0x097f]
    [    0.177671] pnp 00:09: [io  0x0092]
    [    0.177674] pnp 00:09: [io  0x00b2-0x00b3]
    [    0.177676] pnp 00:09: [io  0x0020-0x0021]
    [    0.177678] pnp 00:09: [io  0x00a0-0x00a1]
    [    0.177680] pnp 00:09: [irq 0 disabled]
    [    0.177683] pnp 00:09: [io  0x04d0-0x04d1]
    [    0.177685] pnp 00:09: [io  0x1000-0x1005]
    [    0.177687] pnp 00:09: [io  0x1008-0x100f]
    [    0.177704] pnp 00:09: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    [    0.177708] pnp 00:09: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    [    0.177767] system 00:09: [io  0x0900-0x097f] has been reserved
    [    0.177771] system 00:09: [io  0x04d0-0x04d1] has been reserved
    [    0.177775] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.177799] pnp 00:0a: [io  0xf400-0xf4fe]
    [    0.177802] pnp 00:0a: [io  0x0086]
    [    0.177804] pnp 00:0a: [io  0x1006-0x1007]
    [    0.177806] pnp 00:0a: [io  0x100a-0x1059]
    [    0.177808] pnp 00:0a: [io  0x1060-0x107f]
    [    0.177811] pnp 00:0a: [io  0x1080-0x10bf]
    [    0.177813] pnp 00:0a: [io  0x10c0-0x10df]
    [    0.177815] pnp 00:0a: [io  0x1010-0x102f]
    [    0.177817] pnp 00:0a: [io  0x0809]
    [    0.177833] pnp 00:0a: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    [    0.177836] pnp 00:0a: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    [    0.177840] pnp 00:0a: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    [    0.177844] pnp 00:0a: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    [    0.177904] system 00:0a: [io  0xf400-0xf4fe] has been reserved
    [    0.177908] system 00:0a: [io  0x1080-0x10bf] has been reserved
    [    0.177911] system 00:0a: [io  0x10c0-0x10df] has been reserved
    [    0.177914] system 00:0a: [io  0x0809] has been reserved
    [    0.177918] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.193628] pnp 00:0b: [mem 0x00000000-0x0009efff]
    [    0.193631] pnp 00:0b: [mem 0x0009f000-0x0009ffff]
    [    0.193634] pnp 00:0b: [mem 0x000c0000-0x000cffff]
    [    0.193636] pnp 00:0b: [mem 0x000e0000-0x000fffff]
    [    0.193639] pnp 00:0b: [mem 0x00100000-0x3f66d7ff]
    [    0.193641] pnp 00:0b: [mem 0x3f66d800-0x3f6fffff]
    [    0.193644] pnp 00:0b: [mem 0x3f700000-0x3f7fffff]
    [    0.193646] pnp 00:0b: [mem 0x3f700000-0x3fefffff]
    [    0.193648] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [    0.193651] pnp 00:0b: [mem 0xffa00000-0xffafffff]
    [    0.193653] pnp 00:0b: [mem 0xfec00000-0xfec0ffff]
    [    0.193656] pnp 00:0b: [mem 0xfee00000-0xfee0ffff]
    [    0.193658] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
    [    0.193660] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff]
    [    0.193663] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff]
    [    0.193665] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff]
    [    0.193668] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff]
    [    0.193670] pnp 00:0b: [mem 0xfed18000-0xfed1bfff]
    [    0.193672] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
    [    0.193766] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
    [    0.193771] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
    [    0.193774] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
    [    0.193778] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.193781] system 00:0b: [mem 0x00100000-0x3f66d7ff] could not be reserved
    [    0.193784] system 00:0b: [mem 0x3f66d800-0x3f6fffff] has been reserved
    [    0.193788] system 00:0b: [mem 0x3f700000-0x3f7fffff] has been reserved
    [    0.193791] system 00:0b: [mem 0x3f700000-0x3fefffff] could not be reserved
    [    0.193795] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
    [    0.193798] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved
    [    0.193802] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
    [    0.193806] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
    [    0.193809] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
    [    0.193812] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
    [    0.193816] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
    [    0.193819] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
    [    0.193823] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
    [    0.193826] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
    [    0.193829] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
    [    0.193833] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.193922] pnp: PnP ACPI: found 12 devices
    [    0.193924] ACPI: ACPI bus type pnp unregistered
    [    0.230723] PCI: max bus depth: 1 pci_try_num: 2
    [    0.230789] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
    [    0.230794] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
    [    0.230798] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40200000-0x403fffff]
    [    0.230802] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
    [    0.230806] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
    [    0.230809] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
    [    0.230813] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
    [    0.230820] pci 0000:00:1c.0:   bridge window [mem 0x40200000-0x403fffff]
    [    0.230827] pci 0000:00:1c.0:   bridge window [mem 0x40400000-0x405fffff 64bit pref]
    [    0.230836] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
    [    0.230840] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
    [    0.230847] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
    [    0.230853] pci 0000:00:1c.1:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
    [    0.230862] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
    [    0.230866] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
    [    0.230873] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
    [    0.230879] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [    0.230889] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [    0.230896] pci 0000:00:1e.0:   bridge window [mem 0xfe500000-0xfe5fffff]
    [    0.230927] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.230934] pci 0000:00:1c.0: setting latency timer to 64
    [    0.230946] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.230952] pci 0000:00:1c.1: setting latency timer to 64
    [    0.230964] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.230969] pci 0000:00:1c.3: setting latency timer to 64
    [    0.230979] pci 0000:00:1e.0: setting latency timer to 64
    [    0.230985] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
    [    0.230987] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
    [    0.230990] pci_bus 0000:0b: resource 0 [io  0x3000-0x3fff]
    [    0.230993] pci_bus 0000:0b: resource 1 [mem 0x40200000-0x403fffff]
    [    0.230996] pci_bus 0000:0b: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
    [    0.230999] pci_bus 0000:0c: resource 0 [io  0x2000-0x2fff]
    [    0.231014] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
    [    0.231017] pci_bus 0000:0c: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
    [    0.231020] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
    [    0.231022] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff]
    [    0.231025] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    [    0.231028] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
    [    0.231031] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
    [    0.231033] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
    [    0.231085] NET: Registered protocol family 2
    [    0.231158] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.231417] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.231949] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.232344] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.232349] TCP reno registered
    [    0.232356] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.232371] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.232520] NET: Registered protocol family 1
    [    0.232546] pci 0000:00:02.0: Boot video device
    [    0.232749] PCI: CLS 64 bytes, default 64
    [    0.232814] Unpacking initramfs...
    [    0.536171] Freeing initrd memory: 12216k freed
    [    0.544455] Simple Boot Flag at 0x79 set to 0x1
    [    0.544949] audit: initializing netlink socket (disabled)
    [    0.544973] type=2000 audit(1326142028.543:1): initialized
    [    0.569511] highmem bounce pool size: 64 pages
    [    0.569517] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.574237] VFS: Disk quotas dquot_6.5.2
    [    0.574273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.574452] msgmni has been set to 1716
    [    0.574655] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.574683] io scheduler noop registered
    [    0.574685] io scheduler deadline registered
    [    0.574696] io scheduler cfq registered (default)
    [    0.574847] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.574918] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [    0.575037] pcieport 0000:00:1c.1: setting latency timer to 64
    [    0.575098] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [    0.575187] pcieport 0000:00:1c.3: setting latency timer to 64
    [    0.575248] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
    [    0.575457] intel_idle: MWAIT substates: 0x1110
    [    0.575460] intel_idle: does not run on family 6 model 22
    [    0.575497] ERST: Table is not found!
    [    0.575498] GHES: HEST is not enabled!
    [    0.575582] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
    [    0.591379] Non-volatile memory driver v1.3
    [    0.591382] Linux agpgart interface v0.103
    [    0.591480] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [    0.591553] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [    0.591737] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [    0.591874] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [    0.592059] ahci 0000:00:1f.2: version 3.0
    [    0.592076] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.592141] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [    0.592220] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
    [    0.592225] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
    [    0.592231] ahci 0000:00:1f.2: setting latency timer to 64
    [    0.594359] scsi0 : ahci
    [    0.594454] scsi1 : ahci
    [    0.594523] scsi2 : ahci
    [    0.594745] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 43
    [    0.594749] ata2: DUMMY
    [    0.594752] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 43
    [    0.594799] ata_piix 0000:00:1f.1: version 2.13
    [    0.594810] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.594856] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    0.595255] scsi3 : ata_piix
    [    0.595349] scsi4 : ata_piix
    [    0.595847] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
    [    0.595851] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
    [    0.595937] Fixed MDIO Bus: probed
    [    0.595945] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.595974] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    [    0.595996] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    0.596019] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    0.596051] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    0.596092] ehci_hcd 0000:00:1a.7: debug port 1
    [    0.599991] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [    0.600068] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
    [    0.603982] ata5: port disabled--ignoring
    [    0.609022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    0.609049] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.609052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.609055] usb usb1: Product: EHCI Host Controller
    [    0.609058] usb usb1: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
    [    0.609060] usb usb1: SerialNumber: 0000:00:1a.7
    [    0.609210] hub 1-0:1.0: USB hub found
    [    0.609216] hub 1-0:1.0: 4 ports detected
    [    0.609313] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    0.609332] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.609336] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.609346] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    0.609380] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.613266] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [    0.613286] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
    [    0.623021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.623041] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.623044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.623047] usb usb2: Product: EHCI Host Controller
    [    0.623049] usb usb2: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
    [    0.623051] usb usb2: SerialNumber: 0000:00:1d.7
    [    0.623170] hub 2-0:1.0: USB hub found
    [    0.623175] hub 2-0:1.0: 6 ports detected
    [    0.623265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.623280] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.623311] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    0.623320] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    0.623324] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    0.623332] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    0.623364] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
    [    0.623408] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.623411] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.623414] usb usb3: Product: UHCI Host Controller
    [    0.623416] usb usb3: Manufacturer: Linux 3.1.0-1.2-desktop uhci_hcd
    [    0.623418] usb usb3: SerialNumber: 0000:00:1a.0
    [    0.623535] hub 3-0:1.0: USB hub found
    [    0.623541] hub 3-0:1.0: 2 ports detected
    [    0.623625] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.623635] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    0.623639] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    0.623646] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    0.623688] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
    [    0.623729] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.623732] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.623735] usb usb4: Product: UHCI Host Controller
    [    0.623737] usb usb4: Manufacturer: Linux 3.1.0-1.2-desktop uhci_hcd
    [    0.623739] usb usb4: SerialNumber: 0000:00:1a.1
    [    0.623847] hub 4-0:1.0: USB hub found
    [    0.623852] hub 4-0:1.0: 2 ports detected
    [    0.623927] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    0.623936] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.623940] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.623949] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [    0.623980] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
    [    0.624040] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.624043] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.624045] usb usb5: Product: UHCI Host Controller
    [    0.624048] usb usb5: Manufacturer: Linux 3.1.0-1.2-desktop uhci_hcd
    [    0.624050] usb usb5: SerialNumber: 0000:00:1d.0
    [    0.624162] hub 5-0:1.0: USB hub found
    [    0.624167] hub 5-0:1.0: 2 ports detected
    [    0.624241] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [    0.624251] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.624255] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.624262] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [    0.624294] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
    [    0.624337] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.624340] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.624342] usb usb6: Product: UHCI Host Controller
    [    0.624345] usb usb6: Manufacturer: Linux 3.1.0-1.2-desktop uhci_hcd
    [    0.624347] usb usb6: SerialNumber: 0000:00:1d.1
    [    0.624456] hub 6-0:1.0: USB hub found
    [    0.624461] hub 6-0:1.0: 2 ports detected
    [    0.624533] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    [    0.624544] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.624548] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.624559] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [    0.624591] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
    [    0.624629] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.624632] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.624634] usb usb7: Product: UHCI Host Controller
    [    0.624637] usb usb7: Manufacturer: Linux 3.1.0-1.2-desktop uhci_hcd
    [    0.624639] usb usb7: SerialNumber: 0000:00:1d.2
    [    0.624747] hub 7-0:1.0: USB hub found
    [    0.624752] hub 7-0:1.0: 2 ports detected
    [    0.624830] Initializing USB Mass Storage driver...
    [    0.624869] usbcore: registered new interface driver usb-storage
    [    0.624871] USB Mass Storage support registered.
    [    0.624884] usbcore: registered new interface driver ums-alauda
    [    0.624896] usbcore: registered new interface driver ums-cypress
    [    0.624908] usbcore: registered new interface driver ums-datafab
    [    0.624921] usbcore: registered new interface driver ums-freecom
    [    0.624933] usbcore: registered new interface driver ums-isd200
    [    0.624945] usbcore: registered new interface driver ums-jumpshot
    [    0.624956] usbcore: registered new interface driver ums-karma
    [    0.624968] usbcore: registered new interface driver ums-onetouch
    [    0.624981] usbcore: registered new interface driver ums-sddr09
    [    0.624993] usbcore: registered new interface driver ums-sddr55
    [    0.625030] usbcore: registered new interface driver ums-usbat
    [    0.625091] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    0.628089] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.628126] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.628230] mousedev: PS/2 mouse device common for all mice
    [    0.628364] rtc_cmos 00:03: RTC can wake from S4
    [    0.628502] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.628538] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    0.628550] cpuidle: using governor ladder
    [    0.628552] cpuidle: using governor menu
    [    0.628852] usbcore: registered new interface driver usbhid
    [    0.628854] usbhid: USB HID core driver
    [    0.629088] TCP cubic registered
    [    0.629119] NET: Registered protocol family 10
    [    0.629605] lib80211: common routines for IEEE802.11 drivers
    [    0.629608] lib80211_crypt: registered algorithm 'NULL'
    [    0.629611] Registering the dns_resolver key type
    [    0.629629] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
    [    0.629644] Using IPI No-Shortcut mode
    [    0.629752] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST980811AS_5LY99RTV-part2
    [    0.631957] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    0.772400] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D300, max UDMA/33
    [    0.794277] ata4.00: configured for UDMA/33
    [    0.900032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    0.901561] ata1.00: ATA-7: ST980811AS, 3.CDE, max UDMA/133
    [    0.901564] ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32)
    [    0.902351] ata1.00: configured for UDMA/133
    [    0.902477] scsi 0:0:0:0: Direct-Access     ATA      ST980811AS       3.CD PQ: 0 ANSI: 5
    [    0.902708] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [    0.902762] sd 0:0:0:0: [sda] Write Protect is off
    [    0.902766] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    0.902790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    0.905031] ata3: SATA link down (SStatus 0 SControl 300)
    [    0.908337] scsi 3:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D300 PQ: 0 ANSI: 5
    [    1.006817]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    1.007203] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.253629] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0
    [    1.253636] serio: Synaptics pass-through port at isa0060/serio1/input0
    [    1.291947] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
    [    1.294622] PM: Hibernation image not present or could not be loaded.
    [    1.294642] registered taskstats version 1
    [    1.297513]   Magic number: 12:3:801
    [    1.297623] rtc_cmos 00:03: setting system clock to 2012-01-09 20:47:09 UTC (1326142029)
    [    1.297755] Freeing unused kernel memory: 488k freed
    [    1.297956] Write protecting the kernel text: 5188k
    [    1.297991] Write protecting the kernel read-only data: 3532k
    [    1.297993] NX-protecting the kernel data: 5052k
    [    1.364242] udevd[88]: starting version 173
    [    1.406777] ACPI: acpi_idle registered with cpuidle
    [    1.416673] Monitor-Mwait will be used to enter C-1 state
    [    1.416739] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [    1.420045] Monitor-Mwait will be used to enter C-2 state
    [    1.423033] Monitor-Mwait will be used to enter C-3 state
    [    1.423055] Marking TSC unstable due to TSC halts in idle
    [    1.441919] ACPI: Lid Switch [LID]
    [    1.442082] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [    1.442448] ACPI: Power Button [PBTN]
    [    1.442505] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    [    1.442553] ACPI: Sleep Button [SBTN]
    [    1.476220] thermal LNXTHERM:00: registered as thermal_zone0
    [    1.476229] ACPI: Thermal Zone [THM] (59 C)
    [    1.483941] [drm] Initialized drm 1.1.0 20060810
    [    1.577822] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.577828] i915 0000:00:02.0: setting latency timer to 64
    [    1.669956] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [    1.669964] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [    1.669966] [drm] Driver supports precise vblank timestamp query.
    [    1.670060] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [    1.989171] [drm] initialized overlay support
    [    2.126191] fbcon: inteldrmfb (fb0) is primary device
    [    2.603340] Console: switching to colour frame buffer device 160x50
    [    2.607597] fb0: inteldrmfb frame buffer device
    [    2.607599] drm: registered panic notifier
    [    2.621451] acpi device:35: registered as cooling_device1
    [    2.622210] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input5
    [    2.622336] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
    [    2.622363] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
    [    2.622603] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [    2.676323] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
    [    2.676329] PM: Basic memory bitmaps created
    [    2.735600] PM: Basic memory bitmaps freed
    [    2.735608] video LNXVIDEO:01: Restoring backlight state
    [    2.869999] PM: Starting manual resume from disk
    [    2.870040] PM: Hibernation image partition 8:2 present
    [    2.870042] PM: Looking for hibernation image.
    [    2.870273] PM: Image not found (code -22)
    [    2.870275] PM: Hibernation image not present or could not be loaded.
    [    3.078933] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
    [    3.186282] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
    [    3.753112] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
    [    4.144267] systemd[1]: Set hostname to <linux-ntzs.site>.
    [    6.671250] systemd-readahead-replay[333]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
    [    6.750932] udevd[343]: starting version 173
    [    6.901498] boot.localnet[363]: Using boot-specified hostname 'linux-ntzs.site'
    [    6.945140] boot.localnet[363]: Setting up hostname 'linux-ntzs'..done
    [    7.113343] boot.localnet[363]: Setting up loopback interface RTNETLINK answers: File exists
    [    7.115429] boot.localnet[363]: ..done
    [    8.412454] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
    [    9.842467] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [   10.287615] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [   13.368739] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [   13.425655] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [   13.426403] iTCO_vendor_support: vendor-support=0
    [   13.427148] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [   13.445817] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [   13.445828] ACPI: Battery Slot [BAT0] (battery present)
    [   13.446607] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [   13.446706] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    [   13.448081] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [   13.453193] wmi: Mapper loaded
    [   13.453601] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [   13.454052] ACPI: AC Adapter [AC] (on-line)
    [   13.472911] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [   13.472924] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
    [   13.485082] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
    [   13.485093] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
    [   13.485103] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
    [   13.485112] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
    [   13.525413] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
    [   13.540220] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [   13.540295] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [   13.540330] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [   13.587842] sdhci: Secure Digital Host Controller Interface driver
    [   13.587845] sdhci: Copyright(c) Pierre Ossman
    [   13.588632] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [   13.597192] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
    [   13.597201] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
    [   13.597209] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
    [   13.615351] ALSA hda_codec.c:4877 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
    [   13.615356] ALSA hda_codec.c:4881    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [   13.615364] ALSA hda_codec.c:4885    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
    [   13.615367] ALSA hda_codec.c:4886    mono: mono_out=0x0
    [   13.615370] ALSA hda_codec.c:4889    dig-out=0x21/0x0
    [   13.615372] ALSA hda_codec.c:4890    inputs:
    [   13.615375] ALSA hda_codec.c:4894  Mic=0xb
    [   13.615377] ALSA hda_codec.c:4896 
    [   13.616368] ALSA patch_sigmatel.c:3104 stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
    [   13.641831] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
    [   13.641853] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
    [   13.641883] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [   13.642954] _regulator_get: 0000:03:01.1 supply vmmc not found, using dummy regulator
    [   13.644033] Registered led device: mmc0::
    [   13.645097] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
    [   13.645560] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
    [   13.645590] r592 0000:03:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [   13.648255] r592: driver successfully loaded
    [   13.648320] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [   13.654572] b44 ssb1:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:1c:23:ad:6b:66
    [   13.672362] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [   13.701116] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [   13.701222] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [   13.701944] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [   13.703522] r852: driver loaded successfully
    [   13.711961] input: Dell WMI hotkeys as /devices/virtual/input/input9
    [   13.753153] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [   13.753222] scsi 3:0:0:0: Attached scsi generic sg1 type 5
    [   13.770357] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    [   13.770363] cdrom: Uniform CD-ROM driver Revision: 3.20
    [   13.770620] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [   13.789944] cfg80211: Calling CRDA to update world regulatory domain
    [   13.939436] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
    [   13.966444] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   13.967200] Registered led device: b43-phy0::tx
    [   13.967225] Registered led device: b43-phy0::rx
    [   13.967250] Registered led device: b43-phy0::radio
    [   13.967269] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
    [   14.202146] firewire_core: created device fw0: GUID 474fc00028973070, S400
    [   14.823312] ifup[633]: Service network not started and mode 'auto' -> skipping
    [   14.823947] ifup[635]: Service network not started and mode 'auto' -> skipping
    [   14.857921] cfg80211: World regulatory domain updated:
    [   14.857925] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   14.857928] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   14.857931] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   14.857934] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   14.857937] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   14.857940] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   22.913351] Adding 1001468k swap on /dev/sda2.  Priority:0 extents:1 across:1001468k 
    [   22.924158] fuse init (API version 7.17)
    [   23.009196] systemd-fsck[653]: /dev/sda6: clean, 2472/1499136 files, 263028/5991168 blocks
    [   23.344329] ntfs-3g[666]: Version 2011.4.12 integrated FUSE 27
    [   23.344363] ntfs-3g[666]: Mounted /dev/sda1 (Read-Write, label "", NTFS 3.1)
    [   23.344391] ntfs-3g[666]: Cmdline options: rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dmask=022,locale=en_GB.UTF-8
    [   23.344419] ntfs-3g[666]: Mount options: rw,noexec,nosuid,nodev,users,allow_other,nonempty,atime,fsname=/dev/sda1,blkdev,blksize=4096,default_permissions
    [   23.344446] ntfs-3g[666]: Global ownership and permissions enforced, configuration type 1
    [   23.344472] ntfs-3g[666]: Warning : using problematic uid==0 and gid!=0
    [   23.414954] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
    [   23.676322] microcode: CPU0 sig=0x10661, pf=0x80, revision=0x33
    [   23.718744] powernow: This module only works with AMD K7 CPUs
    [   23.727489] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [   24.137242] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [   24.143011] microcode: CPU0 updated to revision 0x44, date = 2010-10-04
    [   24.168093] nf_conntrack version 0.5.0 (15731 buckets, 62924 max)
    [   24.185335] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   24.890058] b43-phy0: Loading firmware version 508.154 (2009-08-18 00:58:22)
    [   24.955156] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   25.019571] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   25.027391] NET: Registered protocol family 17
    [   30.684542] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=0
    [   30.742547] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,commit=0
    [ 1368.113831] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=600
    [ 1368.181729] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,commit=600
    [ 1389.002226] b44 ssb1:0: eth0: Link is up at 100 Mbps, full duplex
    [ 1389.002230] b44 ssb1:0: eth0: Flow control is off for TX and off for RX
    [ 1389.002456] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 1399.714033] eth0: no IPv6 routers present
    Thanks for any help

  4. $spacer_open
    $spacer_close
  5. #4
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    Quote Originally Posted by w3rthers View Post
    I wasn't sure if the same commands apply to different versions of linux.
    For the most part, terminal commands for networking and system information will be the same across all distributions.
    Your wireless card is there:
    Code:
    wlan0     Link encap:Ethernet  HWaddr 00:1F:3A:03:ED:37  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    And drivers are loaded:
    Code:
    [   24.890058] b43-phy0: Loading firmware version 508.154 (2009-08-18 00:58:22)
    Is your network being detected?
    Try this one:
    Code:
    iwlist wlan0 scan
    In the output, do you see your network name> It will be listed as an ESSID.

    Are you still running OpenSUSE? If so, are you using the KDE desktop, or Gnome?
    Either way, you should have an icon in the top right corner for a Network Manager.
    Click on that, and let us know if any networks are available, and what happens when you try to connect to one.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  6. #5
    Just Joined!
    Join Date
    Jan 2012
    Posts
    11
    Thanks for the reply
    for iwlist wlan0 scan all I got was "essid NNN"
    I'm using KDE and there's nothing in the top right. However there is an icon in the bottom left and it has the wired network it also has 2 wireless networks, those are 2 hotspot networks which I have to subscribe to but it doesn't see the actual network my windows partition connects to. I think the hotspots actually come from my wireless but it's just lost the actual one.
    It worked once when I installed it but then stopped once I restarted it.
    I installed it by putting this in the console which I found on another forum post
    Code:
    sudo /usr/sbin/install_bcm43xx_firmware

  7. #6
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    Is your wireless network configured to broadcast it's network name?
    If it's a hidden network, can you use your Network icon to search for it?
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  8. #7
    Just Joined!
    Join Date
    Jan 2012
    Posts
    11
    Hooray! It works, thanks a million I owe you a beer. I even restarted and it worked still

  9. #8
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    LOL!
    Here's one for you, too.
    Congrats on sticking with it. A lot of new Linux users would run at the first sign of trouble!
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •