Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
I just bought a Patriot wireless N usb adapter. It sees my G router and identifies it by the correct name, identifies that it uses WPA2 personal elncryption, and asks ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Linux Engineer MASONTX's Avatar
    Join Date
    May 2010
    Location
    Mason Texas
    Posts
    934

    wireless USB not connecting


    I just bought a Patriot wireless N usb adapter. It sees my G router and identifies it by the correct name, identifies that it uses WPA2 personal elncryption, and asks for my password, but then endlessly tries to connect. Periodically it wil ask for the password again. The correct driver rtl8188cu is loading, but I don't have something set right.

    Thanks for the help. I know it is something simple I am overlooking, but I can't seem to figure it out.

    lsusb
    Code:
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

    lsmod
    Code:
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN
    Bus 001 Device 003: ID 0bda:0111 Realtek Semiconductor Corp. Card Reader
    Bus 001 Device 004: ID 1370:2168 Swissbit 
    kids@kids-x2:~$ sudo lsmod
    Module                  Size  Used by
    nls_iso8859_1          12713  1 
    nls_cp437              16991  1 
    vfat                   17585  1 
    fat                    61512  1 vfat
    nls_utf8               12557  1 
    isofs                  40257  1 
    vesafb                 13844  1 
    bnep                   18281  2 
    rfcomm                 47604  0 
    parport_pc             32866  0 
    bluetooth             180104  10 bnep,rfcomm
    ppdev                  17113  0 
    cx18_alsa              13768  0 
    mxl5005s               46356  1 
    s5h1409                18842  1 
    tuner_simple           18551  1 
    tuner_types            24318  1 tuner_simple
    snd_hda_codec_realtek   223867  1 
    cs5345                 13095  1 
    tda9887                14154  1 
    snd_hda_intel          33773  1 
    snd_hda_codec         127706  2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep              13668  1 snd_hda_codec
    tda8290                22616  0 
    tuner                  27428  2 
    arc4                   12529  2 
    snd_pcm                97188  3 cx18_alsa,snd_hda_intel,snd_hda_codec
    nvidia              12319264  30 
    snd_seq_midi           13324  0 
    rtl8192cu             103297  0 
    snd_rawmidi            30748  1 snd_seq_midi
    snd_seq_midi_event     14899  1 snd_seq_midi
    cx18                  129432  1 cx18_alsa
    snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
    snd_timer              29990  2 snd_pcm,snd_seq
    snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
    rtl8192c_common        75767  1 rtl8192cu
    snd                    78855  12 cx18_alsa,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    dvb_core              110619  1 cx18
    rtlwifi               111202  1 rtl8192cu
    cx2341x                28331  1 cx18
    i2c_algo_bit           13423  1 cx18
    mac80211              506816  3 rtl8192cu,rtl8192c_common,rtlwifi
    videobuf_vmalloc       13589  1 cx18
    videobuf_core          26390  2 cx18,videobuf_vmalloc
    tveeprom               21249  1 cx18
    v4l2_common            16454  4 cs5345,tuner,cx18,cx2341x
    videodev               98259  5 cs5345,tuner,cx18,cx2341x,v4l2_common
    soundcore              15091  1 snd
    snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
    cfg80211              205544  2 rtlwifi,mac80211
    v4l2_compat_ioctl32    17128  1 videodev
    i2c_nforce2            13058  0 
    edac_core              53746  0 
    mac_hid                13253  0 
    edac_mce_amd           23709  0 
    psmouse                87603  0 
    serio_raw              13211  0 
    k8temp                 13057  0 
    lp                     17799  0 
    parport                46562  3 parport_pc,ppdev,lp
    firewire_ohci          41000  0 
    firewire_core          63558  1 firewire_ohci
    usb_storage            49198  1 
    crc_itu_t              12707  1 firewire_core
    forcedeth              63460  0 
    pata_amd               14118  0

    demsg
    Code:
    [    0.004310] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.005584] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.008495] Mount-cache hash table entries: 256
    [    0.008648] Initializing cgroup subsys cpuacct
    [    0.008654] Initializing cgroup subsys memory
    [    0.008664] Initializing cgroup subsys devices
    [    0.008667] Initializing cgroup subsys freezer
    [    0.008669] Initializing cgroup subsys blkio
    [    0.008676] Initializing cgroup subsys perf_event
    [    0.008709] tseg: 0077f00000
    [    0.008711] CPU: Physical Processor ID: 0
    [    0.008713] CPU: Processor Core ID: 0
    [    0.008715] mce: CPU supports 5 MCE banks
    [    0.008727] using AMD E400 aware idle routine
    [    0.010528] ACPI: Core revision 20110623
    [    0.016012] ftrace: allocating 27049 entries in 107 pages
    [    0.020645] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.061311] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
    [    0.064003] Performance Events: AMD PMU driver.
    [    0.064003] ... version:                0
    [    0.064003] ... bit width:              48
    [    0.064003] ... generic registers:      4
    [    0.064003] ... value mask:             0000ffffffffffff
    [    0.064003] ... max period:             00007fffffffffff
    [    0.064003] ... fixed-purpose events:   0
    [    0.064003] ... event mask:             000000000000000f
    [    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.064003] Booting Node   0, Processors  #1 Ok.
    [    0.064003] smpboot cpu 1: start_ip = 9a000
    [    0.148098] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.148126] Brought up 2 CPUs
    [    0.148128] Total of 2 processors activated (10447.71 BogoMIPS).
    [    0.148977] devtmpfs: initialized
    [    0.149419] EVM: security.selinux
    [    0.149420] EVM: security.SMACK64
    [    0.149422] EVM: security.capability
    [    0.149487] PM: Registering ACPI NVS region at 77ef0000 (12288 bytes)
    [    0.149487] print_constraints: dummy: 
    [    0.149487] RTC time: 20:50:12, date: 06/09/12
    [    0.149487] NET: Registered protocol family 16
    [    0.149487] Trying to unpack rootfs image as initramfs...
    [    0.149487] node 0 link 0: io port [9000, ffff]
    [    0.149487] TOM: 0000000080000000 aka 2048M
    [    0.149487] node 0 link 0: mmio [a0000, bffff]
    [    0.149487] node 0 link 0: mmio [80000000, efffffff]
    [    0.149487] node 0 link 0: mmio [f4000000, fe02ffff]
    [    0.149487] node 0 link 0: mmio [f0000000, f03fffff]
    [    0.149487] bus: [00, 03] on node 0 link 0
    [    0.149487] bus: 00 index 0 [io  0x0000-0xffff]
    [    0.149487] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [    0.149487] bus: 00 index 2 [mem 0x80000000-0xf3ffffff]
    [    0.149487] bus: 00 index 3 [mem 0xf4000000-0xfcffffffff]
    [    0.149487] ACPI: bus type pci registered
    [    0.149487] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [    0.149487] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [    0.156011] PCI: Using configuration type 1 for base access
    [    0.164056] bio: create slab <bio-0> at 0
    [    0.164119] ACPI: Added _OSI(Module Device)
    [    0.164121] ACPI: Added _OSI(Processor Device)
    [    0.164122] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.164124] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.165225] ACPI: EC: Look up EC in DSDT
    [    0.169521] ACPI: Interpreter enabled
    [    0.169526] ACPI: (supports S0 S1 S3 S4 S5)
    [    0.169546] ACPI: Using IOAPIC for interrupt routing
    [    0.174373] ACPI: No dock devices found.
    [    0.174375] HEST: Table not found.
    [    0.174379] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.174915] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03])
    [    0.175956] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af] (ignored)
    [    0.175959] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7] (ignored)
    [    0.175961] pci_root PNP0A08:00: host bridge window [io  0x1c00-0x1c7f] (ignored)
    [    0.175963] pci_root PNP0A08:00: host bridge window [io  0x9000-0xffff] (ignored)
    [    0.175966] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df] (ignored)
    [    0.175968] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.175971] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xefffffff] (ignored)
    [    0.175973] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
    [    0.175996] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500
    [    0.176175] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601
    [    0.176212] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
    [    0.176223] pci 0000:00:01.1: reg 10: [io  0xfc00-0xfc3f]
    [    0.176237] pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
    [    0.176242] pci 0000:00:01.1: reg 24: [io  0x1c40-0x1c7f]
    [    0.176269] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [    0.176275] pci 0000:00:01.1: PME# disabled
    [    0.176288] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
    [    0.176327] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
    [    0.176335] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
    [    0.176367] pci 0000:00:02.0: supports D1 D2
    [    0.176369] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.176372] pci 0000:00:02.0: PME# disabled
    [    0.176383] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
    [    0.176393] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
    [    0.176431] pci 0000:00:02.1: supports D1 D2
    [    0.176433] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.176436] pci 0000:00:02.1: PME# disabled
    [    0.176454] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
    [    0.176492] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
    [    0.176502] pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff]
    [    0.176540] pci 0000:00:05.0: PME# supported from D3hot D3cold
    [    0.176543] pci 0000:00:05.0: PME# disabled
    [    0.176561] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
    [    0.176581] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
    [    0.176610] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
    [    0.176619] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [    0.176624] pci 0000:00:07.0: reg 14: [io  0xec00-0xec07]
    [    0.176657] pci 0000:00:07.0: supports D1 D2
    [    0.176659] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.176663] pci 0000:00:07.0: PME# disabled
    [    0.176675] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
    [    0.176683] pci 0000:00:08.0: reg 10: [io  0x09f0-0x09f7]
    [    0.176688] pci 0000:00:08.0: reg 14: [io  0x0bf0-0x0bf3]
    [    0.176692] pci 0000:00:08.0: reg 18: [io  0x0970-0x0977]
    [    0.176697] pci 0000:00:08.0: reg 1c: [io  0x0b70-0x0b73]
    [    0.176701] pci 0000:00:08.0: reg 20: [io  0xd800-0xd80f]
    [    0.176705] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
    [    0.176735] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
    [    0.176743] pci 0000:00:08.1: reg 10: [io  0x09e0-0x09e7]
    [    0.176748] pci 0000:00:08.1: reg 14: [io  0x0be0-0x0be3]
    [    0.176752] pci 0000:00:08.1: reg 18: [io  0x0960-0x0967]
    [    0.176756] pci 0000:00:08.1: reg 1c: [io  0x0b60-0x0b63]
    [    0.176761] pci 0000:00:08.1: reg 20: [io  0xc400-0xc40f]
    [    0.176765] pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff]
    [    0.176798] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
    [    0.176824] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.176827] pci 0000:00:09.0: PME# disabled
    [    0.176841] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
    [    0.176865] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.176868] pci 0000:00:0b.0: PME# disabled
    [    0.176881] pci 0000:00:0d.0: [10de:03d0] type 0 class 0x000300
    [    0.176887] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
    [    0.176893] pci 0000:00:0d.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.176899] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
    [    0.176905] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [    0.176933] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
    [    0.176954] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
    [    0.176968] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
    [    0.176985] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
    [    0.177008] PCI: peer root bus 00 res updated from pci conf
    [    0.177042] pci 0000:01:05.0: [11c1:5811] type 0 class 0x000c00
    [    0.177053] pci 0000:01:05.0: reg 10: [mem 0xeffff000-0xefffffff]
    [    0.177103] pci 0000:01:05.0: supports D1 D2
    [    0.177105] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
    [    0.177108] pci 0000:01:05.0: PME# disabled
    [    0.177124] pci 0000:01:09.0: [14f1:2f20] type 0 class 0x000780
    [    0.177136] pci 0000:01:09.0: reg 10: [mem 0xeffe0000-0xeffeffff]
    [    0.177143] pci 0000:01:09.0: reg 14: [io  0xbc00-0xbc07]
    [    0.177185] pci 0000:01:09.0: PME# supported from D3hot D3cold
    [    0.177189] pci 0000:01:09.0: PME# disabled
    [    0.177204] pci 0000:01:0a.0: [14f1:5b7a] type 0 class 0x000400
    [    0.177217] pci 0000:01:0a.0: reg 10: [mem 0xe8000000-0xebffffff]
    [    0.177294] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
    [    0.177297] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
    [    0.177300] pci 0000:00:04.0:   bridge window [mem 0xe8000000-0xefffffff]
    [    0.177303] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff pref]
    [    0.177306] pci 0000:00:04.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
    [    0.177308] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.177311] pci 0000:00:04.0:   bridge window [mem 0x80000000-0xf3ffffff] (subtractive decode)
    [    0.177313] pci 0000:00:04.0:   bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode)
    [    0.177333] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    [    0.177336] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
    [    0.177339] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
    [    0.177343] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [    0.177362] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    [    0.177365] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
    [    0.177368] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
    [    0.177371] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [    0.177379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.177476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [    0.177594]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.177597]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.177599] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.196491] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [    0.196534] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
    [    0.196575] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
    [    0.196615] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
    [    0.196654] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [    0.196694] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [    0.196734] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [    0.196776] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [    0.196819] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 *7 9 10 11 14 15)
    [    0.196858] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [    0.196899] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
    [    0.196939] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
    [    0.196987] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
    [    0.197026] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [    0.197067] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
    [    0.197107] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
    [    0.197151] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [    0.197192] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
    [    0.197237] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
    [    0.197315] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    [    0.197383] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
    [    0.197454] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
    [    0.197522] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
    [    0.197590] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
    [    0.197658] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
    [    0.197726] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
    [    0.197794] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
    [    0.197863] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0
    [    0.197931] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0
    [    0.197999] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0
    [    0.198068] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
    [    0.198136] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
    [    0.198210] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0
    [    0.198280] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0
    [    0.198350] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
    [    0.198423] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
    [    0.198492] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0
    [    0.198561] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0
    [    0.198692] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.198697] vgaarb: loaded
    [    0.198698] vgaarb: bridge control possible 0000:00:0d.0
    [    0.198817] i2c-core: driver [aat2870] using legacy suspend method
    [    0.198819] i2c-core: driver [aat2870] using legacy resume method
    [    0.198902] SCSI subsystem initialized
    [    0.198982] libata version 3.00 loaded.
    [    0.199040] usbcore: registered new interface driver usbfs
    [    0.199054] usbcore: registered new interface driver hub
    [    0.199085] usbcore: registered new device driver usb
    [    0.199185] PCI: Using ACPI for IRQ routing
    [    0.200636] PCI: pci_cache_line_size set to 64 bytes
    [    0.200696] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
    [    0.200699] reserve RAM buffer: 0000000077ef0000 - 0000000077ffffff 
    [    0.200808] NetLabel: Initializing
    [    0.200809] NetLabel:  domain hash size = 128
    [    0.200811] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.200825] NetLabel:  unlabeled traffic allowed by default
    [    0.200869] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.200875] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
    [    0.200879] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
    [    0.204078] Switching to clocksource hpet
    [    0.212558] AppArmor: AppArmor Filesystem Enabled
    [    0.212604] pnp: PnP ACPI init
    [    0.212628] ACPI: bus type pnp registered
    [    0.213214] pnp 00:00: [bus 00-03]
    [    0.213216] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.213218] pnp 00:00: [io  0x0000-0x03af window]
    [    0.213221] pnp 00:00: [io  0x03e0-0x0cf7 window]
    [    0.213223] pnp 00:00: [io  0x1c00-0x1c7f window]
    [    0.213228] pnp 00:00: [io  0x9000-0xffff window]
    [    0.213230] pnp 00:00: [io  0x03b0-0x03df window]
    [    0.213232] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.213234] pnp 00:00: [mem 0x80000000-0xefffffff window]
    [    0.213236] pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
    [    0.213327] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.213345] pnp 00:01: [io  0x1000-0x107f]
    [    0.213347] pnp 00:01: [io  0x1080-0x10ff]
    [    0.213349] pnp 00:01: [io  0x1400-0x147f]
    [    0.213351] pnp 00:01: [io  0x1480-0x14ff]
    [    0.213353] pnp 00:01: [io  0x1800-0x187f]
    [    0.213354] pnp 00:01: [io  0x1880-0x18ff]
    [    0.213422] system 00:01: [io  0x1000-0x107f] has been reserved
    [    0.213425] system 00:01: [io  0x1080-0x10ff] has been reserved
    [    0.213427] system 00:01: [io  0x1400-0x147f] has been reserved
    [    0.213430] system 00:01: [io  0x1480-0x14ff] has been reserved
    [    0.213432] system 00:01: [io  0x1800-0x187f] has been reserved
    [    0.213435] system 00:01: [io  0x1880-0x18ff] has been reserved
    [    0.213438] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.213512] pnp 00:02: [io  0x0010-0x001f]
    [    0.213514] pnp 00:02: [io  0x0022-0x003f]
    [    0.213516] pnp 00:02: [io  0x0044-0x005f]
    [    0.213517] pnp 00:02: [io  0x0062-0x0063]
    [    0.213519] pnp 00:02: [io  0x0065-0x006f]
    [    0.213521] pnp 00:02: [io  0x0074-0x007f]
    [    0.213523] pnp 00:02: [io  0x0091-0x0093]
    [    0.213525] pnp 00:02: [io  0x00a2-0x00bf]
    [    0.213526] pnp 00:02: [io  0x00e0-0x00ef]
    [    0.213528] pnp 00:02: [io  0x04d0-0x04d1]
    [    0.213530] pnp 00:02: [io  0x0800-0x087f]
    [    0.213532] pnp 00:02: [io  0x0294-0x0297]
    [    0.213585] system 00:02: [io  0x04d0-0x04d1] has been reserved
    [    0.213588] system 00:02: [io  0x0800-0x087f] has been reserved
    [    0.213590] system 00:02: [io  0x0294-0x0297] has been reserved
    [    0.213593] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.213604] pnp 00:03: [dma 4]
    [    0.213606] pnp 00:03: [io  0x0000-0x000f]
    [    0.213608] pnp 00:03: [io  0x0080-0x0090]
    [    0.213610] pnp 00:03: [io  0x0094-0x009f]
    [    0.213611] pnp 00:03: [io  0x00c0-0x00df]
    [    0.213641] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.213688] pnp 00:04: [irq 0 disabled]
    [    0.213703] pnp 00:04: [irq 8]
    [    0.213705] pnp 00:04: [mem 0xfefff000-0xfefff3ff]
    [    0.213736] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.213760] pnp 00:05: [io  0x0070-0x0073]
    [    0.213795] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.213802] pnp 00:06: [io  0x0061]
    [    0.213833] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.213841] pnp 00:07: [io  0x00f0-0x00ff]
    [    0.213850] pnp 00:07: [irq 13]
    [    0.213881] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.213987] pnp 00:08: [irq 12]
    [    0.214024] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
    [    0.214044] pnp 00:09: [io  0x0060]
    [    0.214046] pnp 00:09: [io  0x0064]
    [    0.214054] pnp 00:09: [irq 1]
    [    0.214092] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.214594] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
    [    0.214652] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
    [    0.214655] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.214776] pnp 00:0b: [mem 0x000d0000-0x000d3fff]
    [    0.214779] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
    [    0.214783] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
    [    0.214785] pnp 00:0b: [mem 0x000fc000-0x000fffff]
    [    0.214787] pnp 00:0b: [mem 0xfefff000-0xfefff0ff]
    [    0.214789] pnp 00:0b: [mem 0x77ef0000-0x77efffff]
    [    0.214791] pnp 00:0b: [mem 0xffff0000-0xffffffff]
    [    0.214793] pnp 00:0b: [mem 0x00000000-0x0009ffff]
    [    0.214795] pnp 00:0b: [mem 0x00100000-0x77eeffff]
    [    0.214797] pnp 00:0b: [mem 0x77f00000-0x7fefffff]
    [    0.214799] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
    [    0.214801] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
    [    0.214803] pnp 00:0b: [mem 0xfefff000-0xfeffffff]
    [    0.214805] pnp 00:0b: [mem 0xfff80000-0xfff80fff]
    [    0.214807] pnp 00:0b: [mem 0xfff90000-0xfffbffff]
    [    0.214809] pnp 00:0b: [mem 0xfffed000-0xfffeffff]
    [    0.214885] system 00:0b: [mem 0x000d0000-0x000d3fff] has been reserved
    [    0.214888] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
    [    0.214891] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
    [    0.214893] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
    [    0.214896] system 00:0b: [mem 0xfefff000-0xfefff0ff] has been reserved
    [    0.214899] system 00:0b: [mem 0x77ef0000-0x77efffff] could not be reserved
    [    0.214902] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
    [    0.214904] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.214907] system 00:0b: [mem 0x00100000-0x77eeffff] could not be reserved
    [    0.214910] system 00:0b: [mem 0x77f00000-0x7fefffff] could not be reserved
    [    0.214913] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.214915] system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
    [    0.214918] system 00:0b: [mem 0xfefff000-0xfeffffff] could not be reserved
    [    0.214921] system 00:0b: [mem 0xfff80000-0xfff80fff] has been reserved
    [    0.214924] system 00:0b: [mem 0xfff90000-0xfffbffff] has been reserved
    [    0.214926] system 00:0b: [mem 0xfffed000-0xfffeffff] has been reserved
    [    0.214929] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.214939] pnp: PnP ACPI: found 12 devices
    [    0.214940] ACPI: ACPI bus type pnp unregistered
    [    0.221241] PCI: max bus depth: 1 pci_try_num: 2
    [    0.221259] pci 0000:00:0d.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
    [    0.221264] pci 0000:00:04.0: PCI bridge to [bus 01-01]
    [    0.221267] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
    [    0.221270] pci 0000:00:04.0:   bridge window [mem 0xe8000000-0xefffffff]
    [    0.221273] pci 0000:00:04.0:   bridge window [mem 0xfda00000-0xfdafffff pref]
    [    0.221277] pci 0000:00:09.0: PCI bridge to [bus 02-02]
    [    0.221280] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
    [    0.221282] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
    [    0.221285] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [    0.221289] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
    [    0.221291] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
    [    0.221294] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
    [    0.221297] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [    0.221308] pci 0000:00:04.0: setting latency timer to 64
    [    0.221312] pci 0000:00:09.0: setting latency timer to 64
    [    0.221316] pci 0000:00:0b.0: setting latency timer to 64
    [    0.221319] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
    [    0.221322] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [    0.221324] pci_bus 0000:00: resource 6 [mem 0x80000000-0xf3ffffff]
    [    0.221326] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff]
    [    0.221329] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
    [    0.221331] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xefffffff]
    [    0.221333] pci_bus 0000:01: resource 2 [mem 0xfda00000-0xfdafffff pref]
    [    0.221336] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
    [    0.221338] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
    [    0.221341] pci_bus 0000:01: resource 6 [mem 0x80000000-0xf3ffffff]
    [    0.221343] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xfcffffffff]
    [    0.221346] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
    [    0.221348] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
    [    0.221350] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    [    0.221353] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
    [    0.221356] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [    0.221358] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [    0.221406] NET: Registered protocol family 2
    [    0.221537] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.222463] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [    0.224775] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.225380] TCP: Hash tables configured (established 262144 bind 65536)
    [    0.225383] TCP reno registered
    [    0.225392] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [    0.225420] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [    0.225546] NET: Registered protocol family 1
    [    0.225796] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [    0.225816] pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
    [    0.296024] pci 0000:00:02.0: PCI INT A disabled
    [    0.296155] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [    0.296168] pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
    [    0.312022] pci 0000:00:02.1: PCI INT B disabled
    [    0.312065] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.312111] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.312168] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.312222] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.312276] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.312334] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.312395] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [    0.312402] pci 0000:00:0d.0: Boot video device
    [    0.312418] PCI: CLS 32 bytes, default 64
    [    0.327183] audit: initializing netlink socket (disabled)
    [    0.327197] type=2000 audit(1339275011.320:1): initialized
    [    0.355868] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.372177] VFS: Disk quotas dquot_6.5.2
    [    0.372239] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.372880] fuse init (API version 7.17)
    [    0.373090] msgmni has been set to 3718
    [    0.373400] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.373426] io scheduler noop registered
    [    0.373428] io scheduler deadline registered
    [    0.373472] io scheduler cfq registered (default)
    [    0.380162] pcieport 0000:00:09.0: setting latency timer to 64
    [    0.380197] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
    [    0.380306] pcieport 0000:00:0b.0: setting latency timer to 64
    [    0.380326] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
    [    0.380399] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.380425] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.380575] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.380583] ACPI: Power Button [PWRB]
    [    0.380644] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.380647] ACPI: Power Button [PWRF]
    [    0.380699] ACPI: Fan [FAN] (on)
    [    0.382529] thermal LNXTHERM:00: registered as thermal_zone0
    [    0.382531] ACPI: Thermal Zone [THRM] (44 C)
    [    0.382567] ERST: Table is not found!
    [    0.382569] GHES: HEST is not enabled!
    [    0.382674] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.455397] Freeing initrd memory: 13832k freed
    [    0.536435] Linux agpgart interface v0.103
    [    0.538015] brd: module loaded
    [    0.538866] loop: module loaded
    [    0.539204] pata_acpi 0000:00:06.0: setting latency timer to 64
    [    0.539432] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
    [    0.539451] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
    [    0.539474] pata_acpi 0000:00:08.0: setting latency timer to 64
    [    0.539481] pata_acpi 0000:00:08.0: PCI INT A disabled
    [    0.539678] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
    [    0.539689] pata_acpi 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
    [    0.539704] pata_acpi 0000:00:08.1: setting latency timer to 64
    [    0.539711] pata_acpi 0000:00:08.1: PCI INT B disabled
    [    0.540208] Fixed MDIO Bus: probed
    [    0.540229] tun: Universal TUN/TAP device driver, 1.6
    [    0.540231] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.540300] PPP generic driver version 2.4.2
    [    0.540417] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.540464] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
    [    0.540480] ehci_hcd 0000:00:02.1: setting latency timer to 64
    [    0.540483] ehci_hcd 0000:00:02.1: EHCI Host Controller
    [    0.540547] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    [    0.540571] ehci_hcd 0000:00:02.1: debug port 1
    [    0.540579] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
    [    0.540602] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
    [    0.552016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    [    0.552161] hub 1-0:1.0: USB hub found
    [    0.552165] hub 1-0:1.0: 10 ports detected
    [    0.552262] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.552309] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
    [    0.552319] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [    0.552321] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [    0.552375] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    [    0.552402] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
    [    0.610117] hub 2-0:1.0: USB hub found
    [    0.610122] hub 2-0:1.0: 10 ports detected
    [    0.610207] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.610266] usbcore: registered new interface driver libusual
    [    0.610309] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    0.612676] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.612683] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.612826] mousedev: PS/2 mouse device common for all mice
    [    0.612979] rtc_cmos 00:05: RTC can wake from S4
    [    0.613109] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    0.613149] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [    0.613241] device-mapper: uevent: version 1.0.3
    [    0.613314] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    [    0.613322] cpuidle: using governor ladder
    [    0.613324] cpuidle: using governor menu
    [    0.613325] EFI Variables Facility v0.08 2004-May-17
    [    0.613640] TCP cubic registered
    [    0.613750] NET: Registered protocol family 10
    [    0.614310] NET: Registered protocol family 17
    [    0.614327] Registering the dns_resolver key type
    [    0.614458] PM: Hibernation image not present or could not be loaded.
    [    0.614472] registered taskstats version 1
    [    0.628673]   Magic number: 0:585:851
    [    0.628799] rtc_cmos 00:05: setting system clock to 2012-06-09 20:50:12 UTC (1339275012)
    [    0.628807] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
    [    0.628849] powernow-k8: fid 0x12 (2600 MHz), vid 0xa
    [    0.628851] powernow-k8: fid 0x10 (2400 MHz), vid 0xc
    [    0.628853] powernow-k8: fid 0xe (2200 MHz), vid 0xe
    [    0.628855] powernow-k8: fid 0xc (2000 MHz), vid 0x10
    [    0.628856] powernow-k8: fid 0xa (1800 MHz), vid 0x10
    [    0.628858] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
    [    0.628905] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.628907] EDD information not available.
    [    0.630587] Freeing unused kernel memory: 920k freed
    [    0.631033] Write protecting the kernel read-only data: 12288k
    [    0.636380] Freeing unused kernel memory: 1608k freed
    [    0.641267] Freeing unused kernel memory: 1196k freed
    [    0.645169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    0.659845] udevd[116]: starting version 175
    [    0.721192] sata_nv 0000:00:08.0: version 3.5
    [    0.721215] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
    [    0.721278] sata_nv 0000:00:08.0: setting latency timer to 64
    [    0.723051] scsi0 : sata_nv
    [    0.725397] scsi1 : sata_nv
    [    0.725551] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
    [    0.725554] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
    [    0.727503] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
    [    0.727558] sata_nv 0000:00:08.1: setting latency timer to 64
    [    0.728511] scsi2 : sata_nv
    [    0.729668] scsi3 : sata_nv
    [    0.729824] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21
    [    0.729828] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21
    [    0.731317] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    [    0.731511] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
    [    0.731517] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
    [    0.731522] forcedeth 0000:00:07.0: setting latency timer to 64
    [    0.864025] usb 1-6: new high-speed USB device number 2 using ehci_hcd
    [    1.050234] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.108019] usb 1-8: new high-speed USB device number 3 using ehci_hcd
    [    1.192036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    1.200128] ata1.00: ATA-7: WDC WD5000AAKS-65TMA0, 12.01C01, max UDMA/133
    [    1.200131] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    1.216119] ata1.00: configured for UDMA/133
    [    1.216284] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5
    [    1.216446] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.216512] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [    1.216607] sd 0:0:0:0: [sda] Write Protect is off
    [    1.216609] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.216654] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.252841] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:92:eb:de:8e
    [    1.252845] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
    [    1.252929] pata_amd 0000:00:06.0: version 0.4.1
    [    1.252976] pata_amd 0000:00:06.0: setting latency timer to 64
    [    1.253319] scsi4 : pata_amd
    [    1.253399] scsi5 : pata_amd
    [    1.253787] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    1.253789] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    1.260993] Initializing USB Mass Storage driver...
    [    1.261157] scsi6 : usb-storage 1-8:1.0
    [    1.261240] usbcore: registered new interface driver usb-storage
    [    1.261242] USB Mass Storage support registered.
    [    1.413741]  sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 > sda2
    [    1.419216] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.684035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.708121] ata2.00: ATAPI: ATAPI   DVD A  DH16A1L, KH15, max UDMA/33
    [    1.740117] ata2.00: configured for UDMA/33
    [    1.743115] scsi 1:0:0:0: CD-ROM            ATAPI    DVD A  DH16A1L   KH15 PQ: 0 ANSI: 5
    [    1.745380] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.745382] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.745659] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.745782] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [    2.066241] ata4: SATA link down (SStatus 0 SControl 300)
    [    2.066290] ata6: port disabled--ignoring
    [    2.069169] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [    2.069190] firewire_ohci 0000:01:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
    [    2.124082] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
    [    2.266653] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
    [    2.273139] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
    [    2.279764] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
    [    2.286388] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
    [    2.287005] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [    2.287202] sd 6:0:0:1: Attached scsi generic sg3 type 0
    [    2.287362] sd 6:0:0:2: Attached scsi generic sg4 type 0
    [    2.287525] sd 6:0:0:3: Attached scsi generic sg5 type 0
    [    2.310406] sd 6:0:0:2: [sdd] Attached SCSI removable disk
    [    2.311270] sd 6:0:0:3: [sde] Attached SCSI removable disk
    [    2.312150] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [    2.316391] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [    2.624120] firewire_core: created device fw0: GUID 0011d8000140c701, S400
    [    3.723635] EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: (null)
    [    6.166000] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [    6.279172] udevd[582]: starting version 175
    [    6.309636] Adding 1964028k swap on /dev/sda18.  Priority:-1 extents:1 across:1964028k 
    [    6.932063] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [    6.948939] lp: driver loaded but no devices found
    [    7.014668] MCE: In-kernel MCE decoding enabled.
    [    7.031353] EDAC MC: Ver: 2.1.0
    [    7.060639] AMD64 EDAC driver v3.4.0
    [    7.064309] EDAC amd64: DRAM ECC disabled.
    [    7.064319] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [    7.064321]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [    7.064322]  (Note that use of the override may cause unknown side effects.)
    [    7.201375] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
    [    7.201405] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
    [    7.219632] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
    [    7.322886] cfg80211: Calling CRDA to update world regulatory domain
    [    7.873491] Linux video capture interface: v2.00
    [    8.305373] cx18:  Start initialization, version 1.5.1
    [    8.305893] cx18-0: Initializing card 0
    [    8.305900] cx18-0: Autodetected Hauppauge card
    [    8.306124] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    [    8.306147] cx18 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
    [    8.306156] cx18-0: Unreasonably low latency timer, setting to 64 (was 32)
    [    8.311086] cx18-0: cx23418 revision 01010000 (B)
    [    8.432963] type=1400 audit(1339275020.303:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=676 comm="apparmor_parser"
    [    8.433416] type=1400 audit(1339275020.303:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=676 comm="apparmor_parser"
    [    8.433670] type=1400 audit(1339275020.303:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=676 comm="apparmor_parser"
    [    8.433971] type=1400 audit(1339275020.303:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=718 comm="apparmor_parser"
    [    8.434432] type=1400 audit(1339275020.303:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=718 comm="apparmor_parser"
    [    8.434688] type=1400 audit(1339275020.303:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=718 comm="apparmor_parser"
    [    8.474024] nvidia: module license 'NVIDIA' taints kernel.
    [    8.474029] Disabling lock debugging due to kernel taint
    [    8.528048] tveeprom 2-0050: Hauppauge model 74551, rev C1A3, serial# 1823523
    [    8.528053] tveeprom 2-0050: MAC address is 00:0d:fe:1b:d3:23
    [    8.528055] tveeprom 2-0050: tuner model is TCL MFNM05-4 (idx 103, type 43)
    [    8.528058] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
    [    8.528060] tveeprom 2-0050: audio processor is CX23418 (idx 38)
    [    8.528062] tveeprom 2-0050: decoder processor is CX23418 (idx 31)
    [    8.528064] tveeprom 2-0050: has radio
    [    8.528066] cx18-0: Autodetected Hauppauge HVR-1600
    [    8.528068] cx18-0: Simultaneous Digital and Analog TV capture supported
    [    8.560498] rtl8192cu: MAC address: 00:02:72:b7:7a:49
    [    8.560502] rtl8192cu: Board Type 0
    [    8.703278] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
    [    8.703286] nvidia 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 22 (level, low) -> IRQ 22
    [    8.703294] nvidia 0000:00:0d.0: setting latency timer to 64
    [    8.703299] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [    8.703668] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  295.40  Thu Apr  5 21:37:00 PDT 2012
    [    9.146555] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
    [    9.146829] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146832] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146834] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146836] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146838] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146841] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146843] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146845] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146847] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146851] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146854] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146856] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146858] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146860] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146865] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146867] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146869] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146874] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [    9.146876] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
    [    9.146878] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [    9.146880] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [    9.146882] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [    9.146892] cfg80211: Pending regulatory request, waiting for it to be processed...
    [    9.146972] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
    [    9.157947] type=1400 audit(1339275021.027:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=895 comm="apparmor_parser"
    [    9.157967] type=1400 audit(1339275021.027:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=896 comm="apparmor_parser"
    [    9.236051] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [    9.236618] usbcore: registered new interface driver rtl8192cu
    [    9.244438] i2c-core: driver [tuner] using legacy suspend method
    [    9.244442] i2c-core: driver [tuner] using legacy resume method
    [   10.077013] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
    [   10.077022] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
    [   10.077026] hda_intel: Disabling MSI
    [   10.077060] snd_hda_intel 0000:00:05.0: setting latency timer to 64
    [   10.275646] tda9887 3-0043: creating new instance
    [   10.275651] tda9887 3-0043: tda988[5/6/7] found
    [   10.276532] tuner 3-0043: Tuner 74 found with type(s) Radio TV.
    [   10.278222] tuner 3-0061: Tuner -1 found with type(s) Radio TV.
    [   10.292600] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
    [   10.292606] cfg80211: World regulatory domain updated:
    [   10.292608] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   10.292611] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.292613] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   10.292615] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   10.292618] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.292620] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.292635] cfg80211: Calling CRDA for country: US
    [   10.297901] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297906] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297909] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297911] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297913] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297916] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297918] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297920] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297922] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297925] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297927] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297929] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297931] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297933] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297935] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297938] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297940] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297942] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297944] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297947] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297949] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   10.297951] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297953] cfg80211: Disabling freq 2467 MHz
    [   10.297954] cfg80211: Disabling freq 2472 MHz
    [   10.297955] cfg80211: Disabling freq 2484 MHz
    [   10.297959] cfg80211: Regulatory domain changed to country: US
    [   10.297960] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   10.297963] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [   10.297965] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
    [   10.297967] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.297970] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.297972] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   10.297974] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
    [   10.308478] udevd[604]: renamed network interface wlan0 to wlan1
    [   10.688442] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
    [   10.689121] EXT4-fs (sda15): re-mounted. Opts: errors=remount-ro
    [   10.712892] tuner-simple 3-0061: creating new instance
    [   10.712897] tuner-simple 3-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
    [   10.715083] cx18-0: Registered device video0 for encoder MPEG (64 x 32.00 kB)
    [   10.715086] DVB: registering new adapter (cx18)
    [   10.720026] hda_codec: ALC888: BIOS auto-probing.
    [   10.720032] hda_codec: ALC888: SKU not ready 0x411111f0
    [   10.833932] MXL5005S: Attached at address 0x63
    [   10.833939] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
    [   10.834103] cx18-0: DVB Frontend registered
    [   10.834105] cx18-0: Registered DVB adapter0 for TS (32 x 32.00 kB)
    [   10.834171] cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB)
    [   10.834223] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
    [   10.834272] cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB)
    [   10.834329] cx18-0: Registered device radio0 for encoder radio
    [   10.834331] cx18-0: Initialized card: Hauppauge HVR-1600
    [   10.834441] cx18:  End initialization
    [   10.860578] cx18-alsa: module loading...
    [   11.363640] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
    [   11.492294] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
    [   11.498459] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
    [   11.540414] init: failsafe main process (1063) killed by TERM signal
    [   12.148170] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input4
    [   12.148300] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
    [   12.148369] input: HDA NVidia Line-Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
    [   12.155924] ppdev: user-space parallel port driver
    [   12.209148] Bluetooth: Core ver 2.16
    [   12.209195] NET: Registered protocol family 31
    [   12.209197] Bluetooth: HCI device and connection manager initialized
    [   12.209201] Bluetooth: HCI socket layer initialized
    [   12.209203] Bluetooth: L2CAP socket layer initialized
    [   12.209607] Bluetooth: SCO socket layer initialized
    [   12.307341] Bluetooth: RFCOMM TTY layer initialized
    [   12.307349] Bluetooth: RFCOMM socket layer initialized
    [   12.307351] Bluetooth: RFCOMM ver 1.11
    [   12.346744] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   12.346748] Bluetooth: BNEP filters: protocol multicast
    [   12.389402] type=1400 audit(1339275024.259:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1144 comm="apparmor_parser"
    [   12.389938] type=1400 audit(1339275024.259:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1144 comm="apparmor_parser"
    [   12.501671] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
    [   12.520633] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
    [   12.668654] vesafb: mode is 2048x1536x32, linelength=8192, pages=0
    [   12.668658] vesafb: scrolling: redraw
    [   12.668662] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [   12.670054] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005180000, using 12288k, total 12288k
    [   12.671484] Console: switching to colour frame buffer device 256x96
    [   12.671540] fb0: VESA VGA frame buffer device
    [   14.267749] rtl8192cu: MAC auto ON okay!
    [   14.304131] rtl8192cu: Tx queue select: 0x05
    [   14.305961] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
    [   14.747978] ADDRCONF(NETDEV_UP): wlan1: link is not ready
    [   14.748859] ADDRCONF(NETDEV_UP): wlan1: link is not ready
    [   14.753654] forcedeth 0000:00:07.0: irq 42 for MSI/MSI-X
    [   14.753844] forcedeth 0000:00:07.0: eth0: no link during initialization
    [   14.754554] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.754968] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   26.525911] ISO 9660 Extensions: Microsoft Joliet Level 3
    [   26.553918] ISOFS: changing to secondary root
    [   85.469931] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 1)
    [   85.668051] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 2)
    [   85.868043] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 3)
    [   85.880100] wlan1: authenticated
    [   85.880641] wlan1: associate with 00:1c:f0:61:5b:57 (try 1)
    [   86.080037] wlan1: associate with 00:1c:f0:61:5b:57 (try 2)
    [   86.096086] wlan1: RX AssocResp from 00:1c:f0:61:5b:57 (capab=0x431 status=0 aid=1)
    [   86.096096] wlan1: associated
    [   86.109966] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
    [   96.115311] wlan1: disassociating from 00:1c:f0:61:5b:57 by local choice (reason=3)
    [   96.136083] cfg80211: All devices are disconnected, going to restore regulatory settings
    [   96.136090] cfg80211: Restoring regulatory settings
    [   96.136109] cfg80211: Calling CRDA to update world regulatory domain
    [   96.137379] wlan1: deauthenticating from 00:1c:f0:61:5b:57 by local choice (reason=3)
    [   96.140951] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
    [   96.140956] cfg80211: World regulatory domain updated:
    [   96.140958] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   96.140960] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   96.140963] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   96.140965] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   96.140967] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   96.140969] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   96.877200] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 1)
    [   97.076026] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 2)
    [   97.276024] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 3)
    [   97.476033] wlan1: authentication with 00:1c:f0:61:5b:57 timed out
    [ 1171.520035] usb 1-5: new high-speed USB device number 4 using ehci_hcd
    [ 1171.659067] scsi7 : usb-storage 1-5:1.0
    [ 1172.658085] scsi 7:0:0:0: Direct-Access     SWISSBIT Twist            2.00 PQ: 0 ANSI: 2
    [ 1172.659634] sd 7:0:0:0: Attached scsi generic sg6 type 0
    [ 1173.720301] ready
    [ 1173.720927] sd 7:0:0:0: [sdf] 2046720 512-byte logical blocks: (1.04 GB/999 MiB)
    [ 1173.721665] sd 7:0:0:0: [sdf] Write Protect is off
    [ 1173.721673] sd 7:0:0:0: [sdf] Mode Sense: 03 00 00 00
    [ 1173.722289] sd 7:0:0:0: [sdf] No Caching mode page present
    [ 1173.722296] sd 7:0:0:0: [sdf] Assuming drive cache: write through
    [ 1173.727035] sd 7:0:0:0: [sdf] No Caching mode page present
    [ 1173.727044] sd 7:0:0:0: [sdf] Assuming drive cache: write through
    [ 1173.728559]  sdf: sdf1
    [ 1173.731018] sd 7:0:0:0: [sdf] No Caching mode page present
    [ 1173.731024] sd 7:0:0:0: [sdf] Assuming drive cache: write through
    [ 1173.731030] sd 7:0:0:0: [sdf] Attached SCSI removable disk
    [ 1336.459562] usb 1-5: USB disconnect, device number 4
    [ 1339.136024] usb 1-5: new high-speed USB device number 5 using ehci_hcd
    [ 1339.275820] scsi8 : usb-storage 1-5:1.0
    [ 1340.273903] scsi 8:0:0:0: Direct-Access     SWISSBIT Twist            2.00 PQ: 0 ANSI: 2
    [ 1340.275934] sd 8:0:0:0: Attached scsi generic sg6 type 0
    [ 1341.336272] ready
    [ 1341.336889] sd 8:0:0:0: [sdf] 2046720 512-byte logical blocks: (1.04 GB/999 MiB)
    [ 1341.337634] sd 8:0:0:0: [sdf] Write Protect is off
    [ 1341.337637] sd 8:0:0:0: [sdf] Mode Sense: 03 00 00 00
    [ 1341.338132] sd 8:0:0:0: [sdf] No Caching mode page present
    [ 1341.338135] sd 8:0:0:0: [sdf] Assuming drive cache: write through
    [ 1341.342384] sd 8:0:0:0: [sdf] No Caching mode page present
    [ 1341.342388] sd 8:0:0:0: [sdf] Assuming drive cache: write through
    [ 1341.343400]  sdf: sdf1
    [ 1341.347512] sd 8:0:0:0: [sdf] No Caching mode page present
    [ 1341.347516] sd 8:0:0:0: [sdf] Assuming drive cache: write through
    [ 1341.347519] sd 8:0:0:0: [sdf] Attached SCSI removable disk

    dmesg | grep firmware
    Code:
    [   11.363640] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
    [   11.492294] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
    [   12.501671] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
    [   12.520633] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
    [   14.305961] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin

    name -r
    Code:
    3.2.0-23-generic
    ifconfig -a
    Code:
    eth0      Link encap:Ethernet  HWaddr 00:1a:92:eb:de:8e  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
              Interrupt:42 Base address:0xc000 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:2960 errors:0 dropped:0 overruns:0 frame:0
              TX packets:2960 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:238016 (238.0 KB)  TX bytes:238016 (238.0 KB)
    
    wlan1     Link encap:Ethernet  HWaddr 00:02:72:b7:7a:49  
              inet6 addr: fe80::202:72ff:feb7:7a49/64 Scope:Link
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:1 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:113 (113.0 B)  TX bytes:155 (155.0 B)


    Thanks again.
    Registered Linux user #526930

  2. #2
    Linux Guru
    Join Date
    Jul 2008
    Posts
    4,205
    I don't remember exactly what distro you are running , maybe Lubuntu or Xubuntu?

    Anyways. Have you found this page yet.
    https://help.ubuntu.com/community/Wi...otingProcedure

    Pay particular attention to step 2. If you get it working good. Post back on what you did to get it working.
    Also, what network gui are you using to connect with. Me I use wicd and it has been trouble free for me lately in Debian Testing and does wpa2 OK.

  3. #3
    Linux Engineer MASONTX's Avatar
    Join Date
    May 2010
    Location
    Mason Texas
    Posts
    934
    I'm distro hopping at the moment, but get the same results with all current distro's. The info supplied above was using Lubuntu. The right driver is loaded, it sees my network and asks for the wpa key, then tries to load for awhile before asking for the key again. I think I have something not right in the setup, but it is the same as for my wireless G usb adapter that works fine. This is the first N adapter that I have tried to use, so is there something different about setting up an N adapter? Am using the default *buntu nework connections ap.
    Registered Linux user #526930

  4. $spacer_open
    $spacer_close
  5. #4
    Linux Guru
    Join Date
    Jul 2008
    Posts
    4,205
    I'm distro hopping at the moment, but get the same results with all current distro's. The info supplied above was using Lubuntu.This is the first N adapter that I have tried to use, so is there something different about setting up an N adapter? Am using the default *buntu nework connections ap.
    Not sure. Since I dont Lubuntu or distro hop much anymore. Maybe

    Code:
    dmesg | tail -30
    will tell you something about if your wireless connection got authenticated, associated and ready

  6. #5
    Linux Guru
    Join Date
    Jul 2008
    Posts
    4,205
    Looks like you aren't the only one having trouble with that chip

    https://bbs.archlinux.org/viewtopic.php?id=142587

    Search term I used in google was

    lsusb -vv -s 0bda:8176
    Edit post: Ubuntu 2010 bug link

    https://bugs.launchpad.net/ubuntu/+s...ux/+bug/795770

    2nd Edit: Which leads you to

    https://bugs.launchpad.net/ubuntu/+s...ux/+bug/852190

  7. #6
    Linux Engineer MASONTX's Avatar
    Join Date
    May 2010
    Location
    Mason Texas
    Posts
    934
    Thanks for the help. Looks like my bargain isn't such a bargain.

    Here is the emesg | tail -30
    Code:
     dmesg | tail -30
    [17817.233214] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
    [17817.373285] udevd[12495]: renamed network interface wlan0 to wlan1
    [17817.384799] rtl8192cu: MAC auto ON okay!
    [17817.429228] rtl8192cu: Tx queue select: 0x05
    [17817.430244] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
    [17817.868075] ADDRCONF(NETDEV_UP): wlan1: link is not ready
    [17817.869327] ADDRCONF(NETDEV_UP): wlan1: link is not ready
    [17820.185063] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 1)
    [17820.189495] wlan1: authenticated
    [17820.189794] wlan1: associate with 00:1c:f0:61:5b:57 (try 1)
    [17820.200240] wlan1: RX AssocResp from 00:1c:f0:61:5b:57 (capab=0x431 status=0 aid=1)
    [17820.200248] wlan1: associated
    [17820.214398] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
    [17830.216507] wlan1: disassociating from 00:1c:f0:61:5b:57 by local choice (reason=3)
    [17830.232183] cfg80211: All devices are disconnected, going to restore regulatory settings
    [17830.232197] cfg80211: Restoring regulatory settings
    [17830.232205] cfg80211: Calling CRDA to update world regulatory domain
    [17830.232577] wlan1: deauthenticating from 00:1c:f0:61:5b:57 by local choice (reason=3)
    [17830.242769] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
    [17830.242779] cfg80211: World regulatory domain updated:
    [17830.242783] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [17830.242790] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [17830.242796] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [17830.242802] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [17830.242808] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [17830.242813] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [17830.969391] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 1)
    [17831.168049] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 2)
    [17831.368050] wlan1: authenticate with 00:1c:f0:61:5b:57 (try 3)
    [17831.568035] wlan1: authentication with 00:1c:f0:61:5b:57 timed out
    Has anyone had any success with this chip? rtl 8192cu or rtl 8188cu
    Registered Linux user #526930

  8. #7
    Linux Guru
    Join Date
    Jul 2008
    Posts
    4,205
    Shot in the dark here.

    Code:
    sudo iwlist scan
    Wondering if your router name begins with a Capital Letter. I have read where NetWork Manager in Ubuntu has fits with that.

    I've also read in Ubuntu forums for that chip

    Code:
    Change the encryption mode to pure WPA2-AES if possible.
    My wireless router name is all lower case letters. I use wpa2-psk encrypton on my wireless router. But I run a different wireless usb internally on this M&A Companion Netbook. than you do. This netbook does not have a wireless pci card.

    Manufacturer=Ralink
    Product=802.11 bg WLAN
    VendorID=0db0 ProductID=6877 KERNEL-MODULE=rt73u
    This guy I helped got your usb chip working in Racy Puppy Linux by the way.

    [SOLVED] Racy 5.3 (kernel 3.0.25) rtl8192cu driver needed Puppy Linux Help & Forum

  9. #8
    Linux Engineer MASONTX's Avatar
    Join Date
    May 2010
    Location
    Mason Texas
    Posts
    934
    Thanks for the info roky. I'm away from my computer, so will have to try it tomorrow night to see if I can get it working. Will let you know. In the meantime, my ralink 802.11 g is working for my primary computer. I need the N to replace it so I can move it to the grandkids computer.
    Registered Linux user #526930

  10. #9
    Linux Engineer MASONTX's Avatar
    Join Date
    May 2010
    Location
    Mason Texas
    Posts
    934
    Router name is all lower case. Rt8192cu driver is installed, and sees network, just wont connect (keeps asking for WPA2 authentication). Best I can figure out, it is working, and sees the network, tries to connect, but the authentication isn't working.
    Registered Linux user #526930

  11. #10
    Linux Guru
    Join Date
    Jul 2008
    Posts
    4,205
    Quote Originally Posted by MASONTX View Post
    Router name is all lower case. Rt8192cu driver is installed, and sees network, just wont connect (keeps asking for WPA2 authentication). Best I can figure out, it is working, and sees the network, tries to connect, but the authentication isn't working.
    How To: Manual Network Configuration without the need for Network Manager - Ubuntu Forums

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •