Find the answer to your Linux question:
Results 1 to 2 of 2
I'm using a plug-in D-LINK AirPlus DWL-G650 wireless card, after I plug it in the socket, it shows ath5k phy3:failed to wakeup the MAC chip and for "ifconfig" command, it ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    May 2012
    Posts
    87

    ath5k phy3:failed to wakeup the MAC chip


    I'm using a plug-in D-LINK AirPlus DWL-G650 wireless card, after I plug it in the socket, it shows

    ath5k phy3:failed to wakeup the MAC chip

    and for "ifconfig" command, it shows:

    wlan1 Link encap:Ethernet HWaddr 00:1C:F0:14:32:5E
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)


    previously, it worked fine, so what is wrong with this failure?

  2. #2
    Just Joined!
    Join Date
    May 2012
    Posts
    87
    Code:
    lshw -C network
    
     *-network
           description: Wireless interface
           product: Atheros AR5001X+ Wireless Network Adapter
           vendor: Atheros Communications Inc.
           physical id: 1
           bus info: pci@0000:03:00.0
           logical name: wlan1
           version: 01
           serial: 00:1c:f0:14:32:5e
           width: 32 bits
           clock: 33MHz
           capabilities: pm bus_master cap_list ethernet physical wireless
           configuration: broadcast=yes driver=ath5k driverversion=3.3.7-1.fc16.i686 firmware=N/A latency=168 link=no maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11bg
           resources: irq:19 memory:8c000000-8c00ffff

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •