Netgear MA101 with Linksys WRT54GS help
I have installed the netgear usb adapter upstairs on my linux pc. Everything seems to be coming up ok with iwconfig and ifconfig. The ip address etc. is assigned through dhcpcd wlan0. I can ping 192.168.1.1 and access the linksys router's config page, but still cannot access any webpages.
I have also tried using a linksys WUSB11v4 adapter upstairs but couldn't get it to work, so as I know that the netgear one has worked before with linux, I thought it'd be easier to just try and configure that one.
Does anyone have any ideas?
Should also mention that I can't get this setup to work on windows either... it finds the network, says it's joining, but then doesn't connect, which is similar to what I think is happening with linux.
Re: Netgear MA101 with Linksys WRT54GS help
also, check if you have a default route set.. if this is missing, you will not get out to the Internet. try:
and in one of the lines output, it should have "UG" set, else you need to set the default route.
I don't know where dhcpcd stores the lease information, but the default route will be in there.