[SOLVED] Wireless On My Debian
Hello,
I have successfully installed debian on one of my partitions after quite a while and now I am ready to make the wireless run. Among other things :) I need some guidance please. As always, thank you in advance.
Code:
debian:~# lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller [8086:2928] (rev 03)
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller [8086:292d] (rev 03)
Kernel driver in use: ata_piix
Kernel modules: ata_piix
05:00.0 System peripheral [0880]: JMicron Technologies, Inc. Device [197b:2382]
05:00.2 SD Host controller [0805]: JMicron Technologies, Inc. Device [197b:2381]
Kernel driver in use: sdhci
Kernel modules: sdhci
05:00.3 System peripheral [0880]: JMicron Technologies, Inc. Device [197b:2383]
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms
06:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
07:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
Kernel driver in use: tg3
Kernel modules: tg3
debian:~#
Code:
jun@debian:~$ lsmod
Module Size Used by
rfcomm 28272 0
l2cap 17248 5 rfcomm
bluetooth 44868 4 rfcomm,l2cap
ppdev 6500 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
ipv6 235364 16
acpi_cpufreq 6796 1
cpufreq_powersave 1856 0
cpufreq_ondemand 6476 1
cpufreq_conservative 5960 0
cpufreq_stats 3776 0
freq_table 4224 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_userspace 3172 0
loop 12748 0
joydev 8480 0
snd_hda_intel 325688 0
snd_pcm_oss 32832 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 2660 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
uvcvideo 45704 0
snd_rawmidi 18528 1 snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
compat_ioctl32 1312 1 uvcvideo
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 2 snd_pcm,snd_seq
videodev 27520 1 uvcvideo
serio_raw 4740 0
jmb38x_ms 7460 0
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 7920 0
v4l1_compat 12260 2 uvcvideo,videodev
pcspkr 2432 0
psmouse 32336 0
i2c_core 19828 1 i2c_i801
memstick 9468 1 jmb38x_ms
snd 45604 9 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
intel_agp 22556 1
agpgart 28776 1 intel_agp
video 16432 0
output 2912 1 video
wmi 6440 0
battery 10180 0
ac 4196 0
button 6096 0
evdev 8000 9
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
sg 26964 0
sr_mod 13316 0
sd_mod 22200 3
cdrom 30176 1 sr_mod
ata_piix 14180 2
ata_generic 4676 0
libata 140416 2 ata_piix,ata_generic
scsi_mod 129324 4 sg,sr_mod,sd_mod,libata
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
ide_core 96136 1 ide_pci_generic
tg3 84708 0
sdhci 13060 0
mmc_core 39900 1 sdhci
ehci_hcd 28396 0
uhci_hcd 18672 0
usbcore 118224 4 uvcvideo,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32544 4 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
jun@debian:~$
Code:
jun@debian:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14 01:27:18 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b76b1000 (usable)
[ 0.000000] BIOS-e820: 00000000b76b1000 - 00000000b76b7000 (reserved)
[ 0.000000] BIOS-e820: 00000000b76b7000 - 00000000b77bd000 (usable)
[ 0.000000] BIOS-e820: 00000000b77bd000 - 00000000b780f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b780f000 - 00000000b7908000 (usable)
[ 0.000000] BIOS-e820: 00000000b7908000 - 00000000b7b0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b7b0f000 - 00000000b7b18000 (usable)
[ 0.000000] BIOS-e820: 00000000b7b18000 - 00000000b7b1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000b7b1f000 - 00000000b7b65000 (usable)
[ 0.000000] BIOS-e820: 00000000b7b65000 - 00000000b7b9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b7b9f000 - 00000000b7c00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b7c00000 - 00000000b7e00000 (reserved)
[ 0.000000] BIOS-e820: 00000000b8000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 2043MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f6cf0] 000f6cf0
[ 0.000000] Entering add_active_range(0, 0, 752485) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 752485
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 752485
[ 0.000000] On node 0 totalpages: 752485
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4087 pages used for memmap
[ 0.000000] HighMem zone: 519022 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.5 present.
[ 0.000000] ACPI: RSDP 000F6CB0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT B7BF4B67, 0074 (r1 LENOVO CB-01 6040000 LTP 0)
[ 0.000000] ACPI: FACP B7BE7000, 00F4 (r3 LENOVO CB-01 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT B7BE8000, 7FE9 (r2 LENOVO CB-01 6040000 INTL 20050624)
[ 0.000000] ACPI: FACS B7B9EFC0, 0040
[ 0.000000] ACPI: HPET B7BFCD54, 0038 (r1 LENOVO CB-01 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG B7BFCD8C, 003C (r1 LENOVO CB-01 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA B7BFCDC8, 0032 (r1 LENOVO CB-01 6040000 5A52)
[ 0.000000] ACPI: APIC B7BFCDFA, 0068 (r1 LENOVO CB-01 6040000 LTP 0)
[ 0.000000] ACPI: BOOT B7BFCE62, 0028 (r1 LENOVO CB-01 6040000 LTP 1)
[ 0.000000] ACPI: SLIC B7BFCE8A, 0176 (r1 LENOVO CB-01 6040000 LTP 0)
[ 0.000000] ACPI: SSDT B7BE6000, 0655 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT B7BE5000, 0259 (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT B7BE4000, 020F (r1 PmRef ApTst 3000 INTL 20050624)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 746606
[ 0.000000] Kernel command line: root=/dev/sda11 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 2161.305 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2972544k/3009940k available (1769k kernel code, 33740k reserved, 751k data, 244k init, 2089980k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba663 - 0xc0376620 ( 751 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba663 (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083862] Calibrating delay using timer specific routine.. 4326.75 BogoMIPS (lpj=8653507)
[ 0.083892] Security Framework initialized
[ 0.083898] SELinux: Disabled at boot.
[ 0.083901] Capability LSM initialized
[ 0.083912] Mount-cache hash table entries: 512
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 1024K
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] Intel machine check architecture supported.
[ 0.084005] Intel machine check reporting enabled on CPU#0.
[ 0.084005] using mwait in idle threads.
[ 0.084005] Checking 'hlt' instruction... OK.
[ 0.100006] ACPI: Core revision 20080321
[ 0.116007] ENABLING IO-APIC IRQs
[ 0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.155663] CPU0: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz stepping 0d
[ 0.156009] Booting processor 1/1 ip 6000
[ 0.164010] Initializing CPU#1
[ 0.164010] Calibrating delay using timer specific routine.. 24906.73 BogoMIPS (lpj=49813462)
[ 0.164010] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.164010] CPU: L2 cache: 1024K
[ 0.164010] CPU: Physical Processor ID: 0
[ 0.164010] CPU: Processor Core ID: 1
[ 0.164010] Intel machine check architecture supported.
[ 0.164010] Intel machine check reporting enabled on CPU#1.
[ 0.244015] CPU1: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz stepping 0d
[ 0.244015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.248015] Brought up 2 CPUs
[ 0.248015] Total of 2 processors activated (29233.48 BogoMIPS).
[ 0.248015] CPU0 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 0 1
[ 0.248015] CPU1 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 1 0
[ 0.248015] net_namespace: 660 bytes
[ 0.248015] Booting paravirtualized kernel on bare hardware
[ 0.248015] NET: Registered protocol family 16
[ 0.248015] ACPI: bus type pci registered
[ 0.248015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.248015] PCI: MCFG area at e0000000 reserved in E820
[ 0.248015] PCI: Using MMCONFIG for extended config space
[ 0.248015] PCI: Using configuration type 1 for base access
[ 0.248015] Setting up standard PCI resources
[ 0.252015] ACPI: EC: Look up EC in DSDT
[ 0.255375] ACPI: BIOS _OSI(Linux) query ignored
[ 0.255378] ACPI: DMI System Vendor: LENOVO
[ 0.255380] ACPI: DMI Product Name: Lenovo 3000 G430
[ 0.255381] ACPI: DMI Product Version: Rev 1.0
[ 0.255383] ACPI: DMI Board Name: LE6
[ 0.255384] ACPI: DMI BIOS Vendor: LENOVO
[ 0.255386] ACPI: DMI BIOS Date: 08/11/2008
[ 0.255387] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.255389] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.256016] ACPI: Interpreter enabled
[ 0.256016] ACPI: (supports S0 S3 S4 S5)
[ 0.256016] ACPI: Using IOAPIC for interrupt routing
[ 0.260016] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.297909] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.297909] ACPI: EC: driver started in interrupt mode
[ 0.297909] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.300787] PCI: Transparent bridge - 0000:00:1e.0
[ 0.300839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.301105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.301247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.301370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.301493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.301616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.301740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.313910] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.313910] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.313910] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.313910] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.313910] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.313910] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.313910] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.314023] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.317910] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.317910] pnp: PnP ACPI init
[ 0.317910] ACPI: bus type pnp registered
[ 0.317910] pnp: PnP ACPI: found 10 devices
[ 0.317910] ACPI: ACPI bus type pnp unregistered
[ 0.317910] PnPBIOS: Disabled by ACPI PNP
[ 0.317910] PCI: Using ACPI for IRQ routing
[ 0.325277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.325281] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.326330] ACPI: RTC can wake from S4
[ 0.329275] system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 0.329281] system 00:05: ioport range 0x400-0x47f has been reserved
[ 0.329284] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.329286] system 00:05: ioport range 0x480-0x48f has been reserved
[ 0.329289] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.329291] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.329293] system 00:05: ioport range 0x1180-0x11ff has been reserved
[ 0.329296] system 00:05: ioport range 0x164e-0x164f has been reserved
[ 0.329298] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.329300] system 00:05: ioport range 0x700-0x70f has been reserved
[ 0.329308] system 00:09: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.329311] system 00:09: iomem range 0xfed10000-0xfed13fff could not be reserved
[ 0.329313] system 00:09: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.329316] system 00:09: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.329318] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.329321] system 00:09: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.329323] system 00:09: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 0.360849] PCI: Bridge: 0000:00:1c.0
[ 0.360849] IO window: disabled.
[ 0.360849] MEM window: disabled.
[ 0.360849] PREFETCH window: disabled.
[ 0.360849] PCI: Bridge: 0000:00:1c.1
[ 0.360849] IO window: 2000-2fff
[ 0.360849] MEM window: 0xf2000000-0xf3ffffff
[ 0.360849] PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
[ 0.360849] PCI: Bridge: 0000:00:1c.2
[ 0.360849] IO window: disabled.
[ 0.360849] MEM window: 0xf4500000-0xf45fffff
[ 0.360849] PREFETCH window: 0x00000000c2000000-0x00000000c20fffff
[ 0.360849] PCI: Bridge: 0000:00:1c.3
[ 0.360849] IO window: disabled.
[ 0.360849] MEM window: 0xf4700000-0xf47fffff
[ 0.360849] PREFETCH window: disabled.
[ 0.360849] PCI: Bridge: 0000:00:1c.5
[ 0.360849] IO window: disabled.
[ 0.360849] MEM window: 0xf4600000-0xf46fffff
[ 0.360849] PREFETCH window: disabled.
[ 0.360849] PCI: Bridge: 0000:00:1e.0
[ 0.360849] IO window: disabled.
[ 0.360849] MEM window: disabled.
[ 0.360849] PREFETCH window: disabled.
[ 0.360849] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.360849] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.360849] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.360849] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.360849] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.360849] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.360849] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.360849] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.360849] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.360849] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.360849] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.360849] NET: Registered protocol family 2
[ 0.370141] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.370353] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.370772] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.371064] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.371067] TCP reno registered
[ 0.374186] NET: Registered protocol family 1
[ 0.374284] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.509847] Switched to high resolution mode on CPU 0
[ 0.586795] it is
[ 0.814808] Freeing initrd memory: 6055k freed
[ 0.814808] Simple Boot Flag at 0x36 set to 0x1
[ 0.814913] audit: initializing netlink socket (disabled)
[ 0.814913] type=2000 audit(1252226901.804:1): initialized
[ 0.814913] highmem bounce pool size: 64 pages
[ 0.814913] Total HugeTLB memory allocated, 0
[ 0.814913] VFS: Disk quotas dquot_6.5.1
[ 0.814913] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.814913] msgmni has been set to 1737
[ 0.814913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.814913] io scheduler noop registered
[ 0.814913] io scheduler anticipatory registered
[ 0.814913] io scheduler deadline registered
[ 0.814913] io scheduler cfq registered (default)
[ 0.814913] pci 0000:00:02.0: Boot video device
[ 0.815251] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.815251] assign_interrupt_mode Found MSI capability
[ 0.815251] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.815251] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.815251] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.815251] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.815251] assign_interrupt_mode Found MSI capability
[ 0.815251] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.815251] Allocate Port Service[0000:00:1c.1:pcie02]
[ 0.815251] Allocate Port Service[0000:00:1c.1:pcie03]
[ 0.815251] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.815251] assign_interrupt_mode Found MSI capability
[ 0.815251] Allocate Port Service[0000:00:1c.2:pcie00]
[ 0.815251] Allocate Port Service[0000:00:1c.2:pcie02]
[ 0.815251] Allocate Port Service[0000:00:1c.2:pcie03]
[ 0.815251] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.815251] assign_interrupt_mode Found MSI capability
[ 0.815278] Allocate Port Service[0000:00:1c.3:pcie00]
[ 0.815308] Allocate Port Service[0000:00:1c.3:pcie02]
[ 0.815338] Allocate Port Service[0000:00:1c.3:pcie03]
[ 0.815429] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.815470] assign_interrupt_mode Found MSI capability
[ 0.815510] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.815541] Allocate Port Service[0000:00:1c.5:pcie02]
[ 0.815572] Allocate Port Service[0000:00:1c.5:pcie03]
[ 0.815863] isapnp: Scanning for PnP cards...
[ 2.842912] isapnp: No Plug & Play device found
[ 2.846913] hpet_resources: 0xfed00000 is busy
[ 2.846913] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.846914] brd: module loaded
[ 2.846914] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.852902] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.854384] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.854389] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.854391] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.854394] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.854396] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.854913] mice: PS/2 mouse device common for all mice
[ 2.854913] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.854913] rtc0: alarms up to one month, y3k
[ 2.854913] cpuidle: using governor ladder
[ 2.854913] cpuidle: using governor menu
[ 2.854913] No iBFT detected.
[ 2.855262] TCP cubic registered
[ 2.855265] NET: Registered protocol family 17
[ 2.855272] Using IPI No-Shortcut mode
[ 2.858913] registered taskstats version 1
[ 2.858913] rtc_cmos 00:06: setting system clock to 2009-09-06 08:48:24 UTC (1252226904)
[ 2.858913] Freeing unused kernel memory: 244k freed
[ 2.937839] ACPI: SSDT B7B1AC20, 0265 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 2.937839] ACPI: SSDT B7B18620, 0549 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 2.937839] Monitor-Mwait will be used to enter C-1 state
[ 2.937839] Monitor-Mwait will be used to enter C-2 state
[ 2.937839] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.937839] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.937839] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.937839] ACPI: SSDT B7B19CA0, 01CF (r1 PmRef ApIst 3000 INTL 20050624)
[ 2.938257] ACPI: SSDT B7B19F20, 008D (r1 PmRef ApCst 3000 INTL 20050624)
[ 2.942136] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 2.942171] ACPI: ACPI0007:01 is registered as cooling_device1
[ 2.942174] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.942136] Marking TSC unstable due to: TSC halts in idle.
[ 2.983496] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 2.987011] ACPI: Thermal Zone [TZ00] (36 C)
[ 3.029551] input: AT Translated Set 2 keyboard as /class/input/input0
[ 3.235316] usbcore: registered new interface driver usbfs
[ 3.235316] usbcore: registered new interface driver hub
[ 3.235316] usbcore: registered new device driver usb
[ 3.242193] USB Universal Host Controller Interface driver v3.0
[ 3.242193] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.242193] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.242193] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.242193] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.242193] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 3.242193] usb usb1: configuration #1 chosen from 1 choice
[ 3.242193] hub 1-0:1.0: USB hub found
[ 3.242193] hub 1-0:1.0: 2 ports detected
[ 3.276859] sdhci: Secure Digital Host Controller Interface driver
[ 3.276859] sdhci: Copyright(c) Pierre Ossman
[ 3.339317] Uniform Multi-Platform E-IDE driver
[ 3.339317] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.347258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.347261] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.347263] usb usb1: Product: UHCI Host Controller
[ 3.347265] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.347267] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.347318] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 3.347318] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 3.347318] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.347318] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.347318] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 3.347318] usb usb2: configuration #1 chosen from 1 choice
[ 3.347318] hub 2-0:1.0: USB hub found
[ 3.347318] hub 2-0:1.0: 2 ports detected
[ 3.450285] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.450289] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.450291] usb usb2: Product: UHCI Host Controller
[ 3.450293] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.450295] usb usb2: SerialNumber: 0000:00:1a.1
[ 3.453223] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 19 (level, low) -> IRQ 19
[ 3.453223] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 3.453223] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.453223] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 3.453223] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 3.453223] usb usb3: configuration #1 chosen from 1 choice
[ 3.453223] hub 3-0:1.0: USB hub found
[ 3.453223] hub 3-0:1.0: 2 ports detected
[ 3.526239] Clocksource tsc unstable (delta = -107524451 ns)
[ 3.556664] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.556666] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.556668] usb usb3: Product: UHCI Host Controller
[ 3.556670] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.556672] usb usb3: SerialNumber: 0000:00:1a.2
[ 3.557246] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 19 (level, low) -> IRQ 19
[ 3.557246] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 3.557246] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.557246] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[ 3.558197] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.558197] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 3.558197] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04000
[ 3.570231] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.570283] usb usb4: configuration #1 chosen from 1 choice
[ 3.570306] hub 4-0:1.0: USB hub found
[ 3.570311] hub 4-0:1.0: 6 ports detected
[ 3.674089] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.674091] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.674093] usb usb4: Product: EHCI Host Controller
[ 3.674095] usb usb4: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 3.674097] usb usb4: SerialNumber: 0000:00:1a.7
[ 3.677214] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 3.677214] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.677214] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.677214] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.677214] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 3.677214] usb usb5: configuration #1 chosen from 1 choice
[ 3.677214] hub 5-0:1.0: USB hub found
[ 3.677214] hub 5-0:1.0: 2 ports detected
[ 3.780107] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.780110] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.780112] usb usb5: Product: UHCI Host Controller
[ 3.780114] usb usb5: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.780115] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.781214] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.781214] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.781214] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.781214] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.781214] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 3.781214] usb usb6: configuration #1 chosen from 1 choice
[ 3.781214] hub 6-0:1.0: USB hub found
[ 3.781214] hub 6-0:1.0: 2 ports detected
[ 3.885001] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.885004] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.885006] usb usb6: Product: UHCI Host Controller
[ 3.885008] usb usb6: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.885009] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.886112] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.886112] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.886112] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.886112] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.886112] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 3.886112] usb usb7: configuration #1 chosen from 1 choice
[ 3.886112] hub 7-0:1.0: USB hub found
[ 3.886112] hub 7-0:1.0: 2 ports detected
[ 3.988978] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.988981] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.988983] usb usb7: Product: UHCI Host Controller
[ 3.988985] usb usb7: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 3.988987] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.990112] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 3.990112] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.990112] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.990112] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 3.991096] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.991096] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.991096] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04400
[ 4.003120] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.003186] usb usb8: configuration #1 chosen from 1 choice
[ 4.003209] hub 8-0:1.0: USB hub found
[ 4.003214] hub 8-0:1.0: 6 ports detected
[ 4.106956] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.106958] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.106960] usb usb8: Product: EHCI Host Controller
[ 4.106962] usb usb8: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 4.106964] usb usb8: SerialNumber: 0000:00:1d.7
[ 4.110122] sdhci: SDHCI controller found at 0000:05:00.2 [197b:2381] (rev 0)
[ 4.110122] ACPI: PCI Interrupt 0000:05:00.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.110122] PCI: Setting latency timer of device 0000:05:00.2 to 64
[ 4.110122] mmc0: SDHCI at 0xf4500400 irq 18 DMA
[ 4.110122] tg3.c:v3.92.1 (June 9, 2008)
[ 4.110122] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 4.110122] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 4.385882] usb 8-3: new high speed USB device using ehci_hcd and address 2
[ 4.501478] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1e:68:f0:bb:d7
[ 4.501478] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
[ 4.501478] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.501478] No dock devices found.
[ 4.509469] SCSI subsystem initialized
[ 4.514017] libata version 3.00 loaded.
[ 4.518052] ata_piix 0000:00:1f.2: version 2.12
[ 4.518052] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 4.518052] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 4.518052] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.518052] scsi0 : ata_piix
[ 4.518052] scsi1 : ata_piix
[ 4.518052] ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19
[ 4.518052] ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19
[ 4.522965] usb 8-3: configuration #1 chosen from 1 choice
[ 4.522965] usb 8-3: New USB device found, idVendor=090c, idProduct=3371
[ 4.522965] usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.522965] usb 8-3: Product: Lenovo EasyCamera
[ 4.522965] usb 8-3: Manufacturer: Image Processor
[ 4.991601] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.000228] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
[ 5.000231] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.009174] ata1.00: configured for UDMA/133
[ 5.486630] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.493864] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RV05, max UDMA/133
[ 5.509844] ata2.00: configured for UDMA/133
[ 5.509844] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 5.513141] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RV05 PQ: 0 ANSI: 5
[ 5.513141] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[ 5.513141] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 5.513141] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 5.513141] scsi2 : ata_piix
[ 5.513141] scsi3 : ata_piix
[ 5.513141] ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19
[ 5.513141] ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19
[ 5.892992] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.270554] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.292453] Driver 'sd' needs updating - please use bus_type methods
[ 6.292453] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.292453] sd 0:0:0:0: [sda] Write Protect is off
[ 6.292453] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.292453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.292453] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.292453] sd 0:0:0:0: [sda] Write Protect is off
[ 6.292453] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.292453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.292453] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.315956] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
[ 6.402140] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.631539] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.631539] Uniform CD-ROM driver Revision: 3.20
[ 6.631539] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.644213] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.644235] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.266520] PM: Starting manual resume from disk
[ 7.322451] kjournald starting. Commit interval 5 seconds
[ 7.322451] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.868243] udevd version 125 started
[ 9.674031] input: Power Button (FF) as /class/input/input1
[ 9.727590] ACPI: Power Button (FF) [PWRF]
[ 9.727779] input: Lid Switch as /class/input/input2
[ 9.763531] ACPI: Lid Switch [LID]
[ 9.763531] input: Power Button (CM) as /class/input/input3
[ 9.763964] Linux agpgart interface v0.103
[ 9.770360] agpgart: Detected an Intel Mobile Intel? GM45 Express Chipset.
[ 9.770360] agpgart: Detected 131068K stolen memory.
[ 9.775025] agpgart: AGP aperture is 256M @ 0xd0000000
[ 9.826603] ACPI: Power Button (CM) [PWRB]
[ 9.826603] input: Sleep Button (CM) as /class/input/input4
[ 9.892963] ACPI: Sleep Button (CM) [SLPB]
[ 9.893474] ACPI: device:04 is registered as cooling_device2
[ 9.893474] input: Video Bus as /class/input/input5
[ 9.894081] ACPI: AC Adapter [ACAD] (off-line)
[ 9.953611] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.957595] ACPI: device:07 is registered as cooling_device3
[ 9.957595] input: Video Bus as /class/input/input6
[ 10.018366] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.580427] input: PC Speaker as /class/input/input7
[ 10.642664] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
[ 10.675960] ACPI: PCI Interrupt 0000:05:00.3[A] -> GSI 18 (level, low) -> IRQ 18
[ 10.675971] PCI: Setting latency timer of device 0000:05:00.3 to 64
[ 10.702782] Linux video capture interface: v2.00
[ 10.822670] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (090c:3371)
[ 10.823284] input: Lenovo EasyCamera as /class/input/input8
[ 10.837023] usbcore: registered new interface driver uvcvideo
[ 10.837026] USB Video Class driver (v0.1.0)
[ 10.969809] ACPI: Battery Slot [BAT1] (battery present)
[ 10.969809] ACPI: WMI: Mapper loaded
[ 11.063579] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 11.063635] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 11.559581] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x25c0b1, caps: 0xa04711/0xa00000
[ 11.611322] input: SynPS/2 Synaptics TouchPad as /class/input/input9
[ 12.428374] Adding 2008084k swap on /dev/sda6. Priority:-1 extents:1 across:2008084k
[ 12.497954] EXT3 FS on sda11, internal journal
[ 12.541163] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 13.331074] rtc: lost 6 interrupts
[ 13.670179] loop: module loaded
[ 16.888063] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 16.888063] tg3: eth0: Flow control is on for TX and on for RX.
[ 17.197468] NET: Registered protocol family 10
[ 17.197468] lo: Disabled Privacy Extensions
[ 17.509235] lp: driver loaded but no devices found
[ 17.574451] ppdev: user-space parallel port driver
[ 21.875974] Bluetooth: Core ver 2.11
[ 21.875974] NET: Registered protocol family 31
[ 21.875974] Bluetooth: HCI device and connection manager initialized
[ 21.875974] Bluetooth: HCI socket layer initialized
[ 21.934137] Bluetooth: L2CAP ver 2.9
[ 21.934145] Bluetooth: L2CAP socket layer initialized
[ 22.106951] Bluetooth: RFCOMM socket layer initialized
[ 22.106951] Bluetooth: RFCOMM TTY layer initialized
[ 22.106951] Bluetooth: RFCOMM ver 1.8
[ 24.295122] mtrr: no more MTRRs available
[ 24.295402] mtrr: no more MTRRs available
[ 24.295571] mtrr: no more MTRRs available
[ 24.295756] mtrr: no more MTRRs available
[ 24.295919] mtrr: no more MTRRs available
[ 24.296080] mtrr: no more MTRRs available
[ 24.296241] mtrr: no more MTRRs available
[ 39.424200] eth0: no IPv6 routers present
[ 91.765392] CPU0 attaching NULL sched-domain.
[ 91.765402] CPU1 attaching NULL sched-domain.
[ 91.768053] CPU0 attaching sched-domain:
[ 91.768053] domain 0: span 0-1
[ 91.768053] groups: 0 1
[ 91.768053] domain 1: span 0-1
[ 91.768053] groups: 0-1
[ 91.768053] CPU1 attaching sched-domain:
[ 91.768053] domain 0: span 0-1
[ 91.768053] groups: 1 0
[ 91.768053] domain 1: span 0-1
[ 91.768053] groups: 0-1
[ 418.680707] CPU0 attaching NULL sched-domain.
[ 418.680707] CPU1 attaching NULL sched-domain.
[ 418.681624] CPU0 attaching sched-domain:
[ 418.681629] domain 0: span 0-1
[ 418.681631] groups: 0 1
[ 418.681635] CPU1 attaching sched-domain:
[ 418.681636] domain 0: span 0-1
[ 418.681638] groups: 1 0
[ 1000.851698] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1001.355017] ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20080321]
[ 1001.355038] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ACAD._PSR] (Node f744061c), AE_TIME
[ 1001.355138] ACPI Exception (ac-0136): AE_TIME, Error reading AC Adapter state [20080321]
Code:
debian:~# uname -r
2.6.26-2-686
